Hi,
I think you are missing the target rootfs libraries. Scratchbox2 requires the arm libraries to complete the compilation, so you have to install on your host machine a target rootfs. Typically you have to install the same rootfs you want use on the target machine. Many embedded distributions release already packaged rootfs filesystem. After you have a working target rootfs, enter the directory where the rootfs is installed and then run the sb2-init command. All the best, Tommaso Da: scratchbox-users-boun...@lists.scratchbox.org [mailto:scratchbox-users-boun...@lists.scratchbox.org] Per conto di Ratheendran R Inviato: lunedì 26 settembre 2011 08:39 A: scratchbox-users@lists.scratchbox.org Oggetto: [Scratchbox-users] Not able to configure target with scratchbox2 Dear All, I want to use scratchbox2 with arm-linux-gcc-4.3.2.tgz tool chain for my cross compiling requirement. I have done the following steps. QEMU git clone git://git.savannah.nongnu.org/qemu.git cd qemu git checkout -b stable v0.10.5 ./configure --prefix=/opt/qemu --target-list=arm-linux-user make install sbox2 Compile and install like this: git clone git://anongit.freedesktop.org/git/sbox2 cd sbox2 ./configure --prefix=/opt/sb2 make install Add sb2 to the PATH: export PATH=/opt/sb2/bin:$PATH target cd /usr/local/arm/4.3.2/arm-none-linux-gnueabi/libc/ sb2-init -c /opt/qemu/bin/qemu-arm armv4t /usr/local/arm/4.3.2/bin/arm-none-linux-gnueabi-gcc I am getting the error below when I cross-compile. sb2-init -c /opt/qemu/bin/qemu-arm armv4t /usr/local/arm/4.3.2/bin/arm-none-linux-gnueabi-gcc Info: Mapping mode not specified, using default (simple) Using /usr/local/arm/4.3.2/bin/arm-none-linux-gnueabi-gcc to detect target architecture: Finished writing sb2.gcc.config gcc configured. sb2-init: Target architecture is 'arm' sb2-init: Host architecture is 'i[3456]86' Finished writing sb2.config sb2-init: configuring libtool for this target: checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... configure: error: cannot run C compiled programs. If you meant to cross compile, use `--host'. See `config.log' for more details. Running /opt/sb2/bin/sb2-build-libtool failed You can run this manually later, otherwise your sb2 environment is correctly setup and ready to use Kindly help me fixing this issue. Thanks & Regards, Rathe
_______________________________________________ Scratchbox-users mailing list Scratchbox-users@lists.scratchbox.org http://lists.scratchbox.org/cgi-bin/mailman/listinfo/scratchbox-users
