On Sun, 13 Feb 2005 16:45:50 +0100 Martin Costabel <costabel at wanadoo.fr> wrote:
> There is a doc on the scribus web site, but it is partly outdated for > 1.2.2cvs. The fastest way to get scribus-CVS on the Mac is the following: > > 1. Install Apple's X11 (two packages, X11User.pkg from the system disk > and X11SDK.pkg from the developer tools disk, the names may be slightly > different). Also make sure that the Xcode developer tools are completely > installed. > 2. Install Fink using the Fink-0.7.1-Installer.dmg from > http://fink.sourceforge.net > 3. Enable the "unstable tree" as it is explained in > http://fink.sourceforge.net/faq/usage-fink.php#unstable > then run > fink selfupdate-rsync > fink install scribus > Either let it finish, which will give you scribus-1.2.1 in > /sw/{bin,lib}, or stop it when it starts building scribus, after all the > prerequisites are installed. Note that this can take some time, because > heavyweights like qt3 are being compiled. > 4. Checkout Scribus from cvs and apply your patch. > 5. Run the attached little shell script scribus-cvs.sh that does the > remaining necessary patching and runs configure and make in the right > order. > 6. Run sudo make install, which will put scribus into /usr/local/{bin,lib} > Nice howto, I hope, you don't mind: http://wiki.scribus.net/index.php/Installing_Scribus_on_Mac_OS_X br Maciej
