Wilhelm E?t schrieb: > Am Montag, 26. Juni 2006 17:53 schrieb Eilert: >> Wilhelm E?t schrieb: >>>>> i make my first Broschure with Scribus 1.3.3.2 and have to use some >>>>> parts which i have got from a Design-Office. >>>>> >>>>> I put a Image-Element an load the pdf but in my generated Postscript >>>>> the Color of imported PDF's are wrong! >>>>> >>>>> Are there any tricks to do this Job? >>>> What version of Ghostscript do you have installed? 8.15+ or better 8.5x >>>> is recommended. >>> I am using AFPL Ghostscript 8.53! >>> >>> If i load the PDF it shows me undefined colorspace and resolution of 72 >>> dpi; but i know that the PDF is in CYMK and has a higher resolution. >> I had similar problems with it and solved them this way: >> >> Import it via the image import function, i. e. open an image frame and >> import the pdf via right mouse-click and "import picture". >> >> Print your Scribus document into pdf with the same resolution your >> imported pdf has, eg 600 dpi both. >> >> Worked for me, at least. > > I did it exactly so but if i compare the original-pdf and the scribus-pdf the > colors are very different :-( > > I make a pdf-1.4 and view both - original and generated pdf - with acroread5 > under Debian Linux.
The only idea I'd have is to use the latest acroread (7 I think), I still have this preliminary version here which appeared a few weeks before the official version, and it runs ok. I have to admit, however, that I do not use colors on my printers, they're just b/w, but I can see pictures, color photos, on screen, and these appear ok. Regards Rolf
