Pedrie Roberts wrote: > Is there hope that the old problem will be fixed that Scribus (I use > 1.3.3.12; we experienced this from when we started with 1.3.3.2) cuts > off content on the right hand side of the page (more often graphical > content) when printing from Scribus?
I had this on a recent job. We imported the file into 1.3.5svn and there was no problem printing from there, but in the end we stuck with 1.3.3.12 and printing from PDF so we could stick with stable scribus. One issue however was that the two sides of flyer in question were over 11 meg as a PDF which made it hard to email to other people for remote printing. I know there are workarounds for this too, but it seems to get silly when you need workarounds for your workarounds ! On the other hand, there were 3400 copies to print, which is a lot of local printing. I don't know how other people > manage to use the program with this problem, but we are simply forced > to export everything as PDF before printing. That's what we do. It's been a adequate work around. > Scribus almost could just > as well not have a print function. A bit harsh. It seems to work 8 times out of 10 ! Cheers, J/. -- John Beardmore, MSc EDM (Open), B.A. Chem (Oxon), CMIOSH, AIEMA, MEI Managing Director, T4 Sustainability Limited. http://www.T4sLtd.co.uk/ Energy Audit, Carbon Management, Design Advice, Sustainable Energy Consultancy and Installation, Carbon Trust Standard Registered Assessor Phone: 0845 4561332 Mobile: 07785 563116 Skype: t4sustainability
