Hi John!I not pretend my sugestions solve your problem, but I think is good to consider them.1-when export from scribus to pdf set the maxim of dpi to 200, is solution to get smaller files, but the quality isn't like in normal 300 dpi - need to try to see if diference is sesisable.2-buy more RAM memory for your PC you need less 2G ideal is 4GHave a good day, and forgive my poor english.?Tomasp.s. off-topic?ppd-drivers what can be use for 'print-to-file' with Adobe-Reader http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=204&fileID=204 download, unzip, install the ppd
--- On Mon, 3/22/10, John Jason Jordan <johnxj at comcast.net> wrote: From: John Jason Jordan <[email protected]> Subject: [scribus] Transparency, PDF export, and file size To: "Scribus" <scribus at lists.scribus.info> Date: Monday, March 22, 2010, 8:27 AM I have a bewildering array of options available to solve this problem, but so far I haven't hit on the right combination. The problem: I have an .sla file of 96 MB that consists of a 132 page book. Several of the pages have transparency. I need to print to laser printers with PostScript level 2 or PCL 5. The document was created in Fedora 11 x86_64 with 1.3.5.1. The transparency pages all have various graphics frames with transparent fill so the underlying text frames show through. If I save to PDF 1.3 these come out as solid black. I need to export to PDF 1.4 or 1.5 to get them to appear transparent. However, outside of the transparency, the document has nothing fancy, not even color images. In fact, there are not even bitmap images. Everything is either text or vector images in black and white. Unfortunately, both PDF 1.4 and 1.5 create a PDF file of over 200 MB. It takes several minutes just to open one of these files in any of my various PDF viewers (Adobe Reader 9.2, Carbaret, Foxit, Evince, Okular). And when I try to print them the laser printers run at glacial speeds. In the past my preferred solution to such problems was to print to file with Adobe Reader on Windows specifying a PCL5 driver. This created a PRN file which I could send to the printers with lpr. Printing was fast and accurate. But this time Reader on Windows will not print to file. After half an hour it remains stuck on 0% and the file is 0 bytes. Adobe Reader on Linux will only create PS files, but it does the same thing - gets stuck at 0%. I can print to PS file directly from Scribus, but the resulting file has solid black. In other words, it does not preserve the transparency. What I need is a way to export to small PDF or PS while preserving transparency. Any suggestions welcome. _______________________________________________ scribus mailing list scribus at lists.scribus.info http://lists.scribus.info/mailman/listinfo/scribus -------------- partea urm?toare -------------- Un ata?ament HTML a fost eliminat URL: <http://lists.scribus.info/pipermail/scribus/attachments/20100322/d5c36ab5/attachment.htm>
