No, it's been working fine for me with no characters selected. If you have one or more characters selected, the space before each selected character is increased by the specified percentage. With no character selected, space is increased at the insertion bar. However, when moving the insertion bar and then returning to the same character pair, spacing is reported as 0.0% even though the real value isn't 0.0%. The annoyance is clicking the up or down spin button resets the "initial" reference back to zero instead of the current spacing.
Mike ----- Original Message ----- From: a.l.e<mailto:ale.comp_06 at xox.ch> To: scribus at lists.scribus.info<mailto:scribus at lists.scribus.info> Sent: Tuesday, March 30, 2010 3:27 PM Subject: Re: [scribus] Text Kerning/Spacing Bug hi mike > There seems to be a bug with manual text character kerning. When I > manually adjust character spacing, when I later set the insertion bar > between adjusted characters the text properties reports 0.0% spacing, > even though the spacing is indeed adjusted. When clicking one of the > spin buttons to increase or decrease the spacing, the current spacing > is reset to 0.0%. Updates to adjusted character spacing is always > from 0% instead of from the current spacing (so you had better get > the spacing perfect on the first try!). i think that you have to select two chars in order to adjust the spacing between them... ciao a.l.e _______________________________________________ scribus mailing list scribus at lists.scribus.info<mailto:scribus at lists.scribus.info> http://lists.scribus.info/mailman/listinfo/scribus<http://lists.scribus.info/mailman/listinfo/scribus> -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.scribus.info/pipermail/scribus/attachments/20100330/ee9e72e7/attachment.htm>
