On 02/16/2012 03:25 PM, john Culleton wrote: > On Thu, 16 Feb 2012 08:27:42 +0100 ale rimoldi > <ale.comp_06 at xox.ch> wrote: > >> hi >> >>> Am 15.02.2012 01:34, schrieb john Culleton: >>>> On Tue, 14 Feb 2012 20:51:32 +0100 Franz Schmid >>>> <Franz.Schmid at altmuehlnet.de> wrote: >>>> >>>>>> >>>>>> I just built svn head without problems. >>>>> You need a fairly recent version of poppler to compile, >>>>> which version of poppler do you have? >>>>> >>>>> Franz Schmid >>>> >>>> poppler-0.18.3. >>>> >>>> Installed yesterday. Ran ldconfig. Just rebooted. Error >>>> recurs. Should I back up to poppler-0.18? >>> Hmm, don't know. Yesterday i've tested poppler-0.18.3 and it >>> compiled fine here. Maybe the compiler just gets the wrong >>> include path for poppler. >> >> several months ago, i've tried to get scribus to use a poppler >> installed in at a custom location... but i could not get it to >> work... (it was at /usr/local/poppler/) >> >> ciao a.l.e >> > OK I am stuck again. I wiped out all references to poppler in > /usr/local/bin, /usr/local/lib and /usr/local/include. I made > three separate compiles for poppler, one with prefix /usr/share, > one with prefix /usr and one with prefix / . I ran make install > and ldconfig after each compile. I wiped my work directory for > scribus 150 clean. > > After all this I still blow up with this message: > ------------------------------------------------------- > CMake Error: The following variables are used in this project, but they are > set to NOTFOUND. > Please set them or make sure they are set and tested correctly in the CMake > files: > POPPLER_INCLUDE_DIR > used as include directory in directory /usr/local/src/s150 > used as include directory in directory /usr/local/src/s150/scribus > used as include directory in directory /usr/local/src/s150/scribus/dtd > used as include directory in directory > /usr/local/src/s150/scribus/manpages > used as include directory in directory > /usr/local/src/s150/scribus/colormgmt > used as include directory in directory /usr/local/src/s150/scribus/desaxe > used as include directory in directory /usr/local/src/s150/scribus/fonts > used as include directory in directory /usr/local/src/s150/scribus/styles > ---etc >
Keep in mind that Scribus is looking for the header files for poppler. In Fedora this is acquired with poppler-devel. Greg
