For MCS51, I was wondering if there is anyway to specify a __code
variable that is in non-default code bank. Here is what I could like to
do...
__code __at (0x1FFF8) u8_t ieee_flash_addr[8];
The flash programmer will initialize address 0x1FFF8 - 0x1FFFF to the
IEEE address for this chip and this will be retained through code
reprogramming.
Currently I have to directly twiddle the FMAP bank control register:
u8_t orig_fmap;
u8_t ii;
/* Copy IEEE/Serialization Address from 0x1FFF8 (highest bytes in
BANK3) */
orig_fmap = FMAP;
FMAP=3;
for (ii=0; ii<8; ii++) { mac_address[ii] = flash_ieee_addr[ii]; }
FMAP=orig_fmap;
It would be cleaner if the compiler could take care of the FMAP change.
Of course this only works in nonbanked code.
thanks!
a*
------------------------------------------------------------------------------
Download Intel® Parallel Studio Eval
Try the new software tools for yourself. Speed compiling, find bugs
proactively, and fine-tune applications for parallel performance.
See why Intel Parallel Studio got high marks during beta.
http://p.sf.net/sfu/intel-sw-dev
_______________________________________________
Sdcc-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/sdcc-user
