在 2012-12-18二的 13:41 +0100,Vasilis Liaskovitis写道: > Each hotplug-able memory slot is a DimmDevice. All DimmDevices are attached > to a new bus called DimmBus. This bus is introduced so that we no longer > depend on hotplug-capability of main system bus (the main bus does not allow > hotplugging). The DimmBus should be attached to a chipset Device (i440fx in > case > of the pc) > > A hot-add operation for a particular dimm: > - creates a new DimmDevice and attaches it to the DimmBus > - creates a new MemoryRegion of the given physical address offset, size and > node proximity, and attaches it to main system memory as a sub_region. > > Hotplug operations are done through normal device_add commands. > Also add properties to DimmDevice. > > v3->v4: Removed hot-remove functions. Will be offered in separate patches. > > Signed-off-by: Vasilis Liaskovitis <vasilis.liaskovi...@profitbricks.com> > --- > hw/Makefile.objs | 2 +- > hw/dimm.c | 245 > ++++++++++++++++++++++++++++++++++++++++++++++++++++++ > hw/dimm.h | 89 ++++++++++++++++++++ > 3 files changed, 335 insertions(+), 1 deletions(-) > create mode 100644 hw/dimm.c > create mode 100644 hw/dimm.h > > diff --git a/hw/Makefile.objs b/hw/Makefile.objs > index d581d8d..51494c9 100644 > --- a/hw/Makefile.objs > +++ b/hw/Makefile.objs > @@ -29,7 +29,7 @@ common-obj-$(CONFIG_I8254) += i8254_common.o i8254.o > common-obj-$(CONFIG_PCSPK) += pcspk.o > common-obj-$(CONFIG_PCKBD) += pckbd.o > common-obj-$(CONFIG_FDC) += fdc.o > -common-obj-$(CONFIG_ACPI) += acpi.o acpi_piix4.o acpi_ich9.o smbus_ich9.o > +common-obj-$(CONFIG_ACPI) += acpi.o acpi_piix4.o acpi_ich9.o smbus_ich9.o > dimm.o > common-obj-$(CONFIG_APM) += pm_smbus.o apm.o > common-obj-$(CONFIG_DMA) += dma.o > common-obj-$(CONFIG_I82374) += i82374.o > diff --git a/hw/dimm.c b/hw/dimm.c > new file mode 100644 > index 0000000..e384952 > --- /dev/null > +++ b/hw/dimm.c > @@ -0,0 +1,245 @@ > +/* > + * Dimm device for Memory Hotplug > + * > + * Copyright ProfitBricks GmbH 2012 > + * This library is free software; you can redistribute it and/or > + * modify it under the terms of the GNU Lesser General Public > + * License as published by the Free Software Foundation; either > + * version 2 of the License, or (at your option) any later version. > + * > + * This library is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU > + * Lesser General Public License for more details. > + * > + * You should have received a copy of the GNU Lesser General Public > + * License along with this library; if not, see > <http://www.gnu.org/licenses/> > + */ > + > +#include "trace.h" > +#include "qdev.h" > +#include "dimm.h" > +#include <time.h> > +#include "../exec-memory.h" > +#include "qmp-commands.h" > + > +/* the following list is used to hold dimm config info before machine > + * is initialized. After machine init, the list is not used anymore.*/ > +static DimmConfiglist dimmconfig_list = > + QTAILQ_HEAD_INITIALIZER(dimmconfig_list); > + > +/* the list of memory buses */ > +static QLIST_HEAD(, DimmBus) memory_buses; > + > +static void dimmbus_dev_print(Monitor *mon, DeviceState *dev, int indent); > +static char *dimmbus_get_fw_dev_path(DeviceState *dev); > + > +static Property dimm_properties[] = { > + DEFINE_PROP_UINT64("start", DimmDevice, start, 0), > + DEFINE_PROP_SIZE("size", DimmDevice, size, DEFAULT_DIMMSIZE), > + DEFINE_PROP_UINT32("node", DimmDevice, node, 0), > + DEFINE_PROP_BIT("populated", DimmDevice, populated, 0, false), > + DEFINE_PROP_END_OF_LIST(), > +}; > + > +static void dimmbus_dev_print(Monitor *mon, DeviceState *dev, int indent) > +{ > +} > + > +static char *dimmbus_get_fw_dev_path(DeviceState *dev) > +{ > + char path[40]; > + > + snprintf(path, sizeof(path), "%s", qdev_fw_name(dev)); > + return strdup(path); > +} > + > +static void dimm_bus_class_init(ObjectClass *klass, void *data) > +{ > + BusClass *k = BUS_CLASS(klass); > + > + k->print_dev = dimmbus_dev_print; > + k->get_fw_dev_path = dimmbus_get_fw_dev_path; > +} > + > +static void dimm_bus_initfn(Object *obj) > +{ > + DimmBus *bus = DIMM_BUS(obj); > + QTAILQ_INIT(&bus->dimmconfig_list); > + QTAILQ_INIT(&bus->dimmlist); > +} > + > +static const TypeInfo dimm_bus_info = { > + .name = TYPE_DIMM_BUS, > + .parent = TYPE_BUS, > + .instance_size = sizeof(DimmBus), > + .instance_init = dimm_bus_initfn, > + .class_init = dimm_bus_class_init, > +}; > + > +DimmBus *dimm_bus_create(Object *parent, const char *name, uint32_t > max_dimms, > + dimm_calcoffset_fn pmc_set_offset) > +{ > + DimmBus *memory_bus; > + DimmConfig *dimm_cfg, *next_cfg; > + uint32_t num_dimms = 0; > + > + memory_bus = g_malloc0(dimm_bus_info.instance_size); > + memory_bus->qbus.name = name ? g_strdup(name) : "membus.0"; > + qbus_create_inplace(&memory_bus->qbus, TYPE_DIMM_BUS, DEVICE(parent), > + name); > + > + QTAILQ_FOREACH_SAFE(dimm_cfg, &dimmconfig_list, nextdimmcfg, next_cfg) { > + if (!strcmp(memory_bus->qbus.name, dimm_cfg->bus_name)) { > + if (max_dimms && (num_dimms == max_dimms)) { > + fprintf(stderr, "Bus %s can only accept %u number of > DIMMs\n", > + name, max_dimms); > + } > + QTAILQ_REMOVE(&dimmconfig_list, dimm_cfg, nextdimmcfg); > + QTAILQ_INSERT_TAIL(&memory_bus->dimmconfig_list, dimm_cfg, > + nextdimmcfg); > + > + dimm_cfg->start = pmc_set_offset(DEVICE(parent), dimm_cfg->size); > + num_dimms++; > + } > + } > + QLIST_INSERT_HEAD(&memory_buses, memory_bus, next); > + return memory_bus; > +} > + > +static void dimm_populate(DimmDevice *s) > +{ > + DeviceState *dev = (DeviceState *)s; > + MemoryRegion *new = NULL; > + > + new = g_malloc(sizeof(MemoryRegion)); > + memory_region_init_ram(new, dev->id, s->size); > + vmstate_register_ram_global(new); > + memory_region_add_subregion(get_system_memory(), s->start, new); > + s->populated = true; > + s->mr = new;
can't we simple just inc ref-count of mr when init memory_region, and dec ref-count of mr when destroy memory_region? Sorry, it may be a bold idea :-) > +} > + > +void dimm_config_create(char *id, uint64_t size, const char *bus, uint64_t > node, > + uint32_t dimm_idx, uint32_t populated) > +{ > + DimmConfig *dimm_cfg; > + dimm_cfg = (DimmConfig *) g_malloc0(sizeof(DimmConfig)); > + dimm_cfg->name = strdup(id); > + dimm_cfg->bus_name = strdup(bus); > + dimm_cfg->idx = dimm_idx; > + dimm_cfg->start = 0; > + dimm_cfg->size = size; > + dimm_cfg->node = node; > + dimm_cfg->populated = populated; > + > + QTAILQ_INSERT_TAIL(&dimmconfig_list, dimm_cfg, nextdimmcfg); > +} > + > +void dimm_bus_hotplug(dimm_hotplug_fn hotplug, DeviceState *qdev) > +{ > + DimmBus *bus; > + QLIST_FOREACH(bus, &memory_buses, next) { > + assert(bus); > + bus->qbus.allow_hotplug = 1; > + bus->dimm_hotplug_qdev = qdev; > + bus->dimm_hotplug = hotplug; > + } > +} > + > +static void dimm_plug_device(DimmDevice *slot) > +{ > + DimmBus *bus = DIMM_BUS(qdev_get_parent_bus(&slot->qdev)); > + > + dimm_populate(slot); > + if (bus->dimm_hotplug) { > + bus->dimm_hotplug(bus->dimm_hotplug_qdev, slot, 1); > + } > +} > + > +static int dimm_unplug_device(DeviceState *qdev) > +{ > + return 1; > +} > + > +static DimmConfig *dimmcfg_find_from_name(DimmBus *bus, const char *name) > +{ > + DimmConfig *slot; > + > + QTAILQ_FOREACH(slot, &bus->dimmconfig_list, nextdimmcfg) { > + if (!strcmp(slot->name, name)) { > + return slot; > + } > + } > + return NULL; > +} > + > +void dimm_setup_fwcfg_layout(uint64_t *fw_cfg_slots) > +{ > + DimmConfig *slot; > + DimmBus *bus; > + > + QLIST_FOREACH(bus, &memory_buses, next) { > + QTAILQ_FOREACH(slot, &bus->dimmconfig_list, nextdimmcfg) { > + assert(slot->start); > + fw_cfg_slots[3 * slot->idx] = cpu_to_le64(slot->start); > + fw_cfg_slots[3 * slot->idx + 1] = cpu_to_le64(slot->size); > + fw_cfg_slots[3 * slot->idx + 2] = cpu_to_le64(slot->node); > + } > + } > +} > + > +static int dimm_init(DeviceState *s) > +{ > + DimmBus *bus = DIMM_BUS(qdev_get_parent_bus(s)); > + DimmDevice *slot; > + DimmConfig *slotcfg; > + > + slot = DIMM(s); > + slot->mr = NULL; > + > + slotcfg = dimmcfg_find_from_name(bus, s->id); > + > + if (!slotcfg) { > + fprintf(stderr, "%s no config for slot %s found\n", > + __func__, s->id); > + return 1; > + } > + > + slot->idx = slotcfg->idx; > + assert(slotcfg->start); > + slot->start = slotcfg->start; > + slot->size = slotcfg->size; > + slot->node = slotcfg->node; > + > + QTAILQ_INSERT_TAIL(&bus->dimmlist, slot, nextdimm); > + dimm_plug_device(slot); > + > + return 0; > +} > + > + > +static void dimm_class_init(ObjectClass *klass, void *data) > +{ > + DeviceClass *dc = DEVICE_CLASS(klass); > + > + dc->props = dimm_properties; > + dc->unplug = dimm_unplug_device; > + dc->init = dimm_init; > + dc->bus_type = TYPE_DIMM_BUS; > +} > + > +static TypeInfo dimm_info = { > + .name = TYPE_DIMM, > + .parent = TYPE_DEVICE, > + .instance_size = sizeof(DimmDevice), > + .class_init = dimm_class_init, > +}; > + > +static void dimm_register_types(void) > +{ > + type_register_static(&dimm_bus_info); > + type_register_static(&dimm_info); > +} > + > +type_init(dimm_register_types) > diff --git a/hw/dimm.h b/hw/dimm.h > new file mode 100644 > index 0000000..75a6911 > --- /dev/null > +++ b/hw/dimm.h > @@ -0,0 +1,89 @@ > +#ifndef QEMU_DIMM_H > +#define QEMU_DIMM_H > + > +#include "qemu-common.h" > +#include "memory.h" > +#include "sysbus.h" > +#include "qapi-types.h" > +#include "qemu-queue.h" > +#include "cpus.h" > +#define MAX_DIMMS 255 > +#define DIMM_BITMAP_BYTES ((MAX_DIMMS + 7) / 8) > +#define DEFAULT_DIMMSIZE (1024*1024*1024) > + > +typedef enum { > + DIMM_REMOVE_SUCCESS = 0, > + DIMM_REMOVE_FAIL = 1, > + DIMM_ADD_SUCCESS = 2, > + DIMM_ADD_FAIL = 3 > +} dimm_hp_result_code; > + > +#define TYPE_DIMM "dimm" > +#define DIMM(obj) \ > + OBJECT_CHECK(DimmDevice, (obj), TYPE_DIMM) > +#define DIMM_CLASS(klass) \ > + OBJECT_CLASS_CHECK(DimmDeviceClass, (klass), TYPE_DIMM) > +#define DIMM_GET_CLASS(obj) \ > + OBJECT_GET_CLASS(DimmDeviceClass, (obj), TYPE_DIMM) > + > +typedef struct DimmDevice DimmDevice; > +typedef QTAILQ_HEAD(DimmConfiglist, DimmConfig) DimmConfiglist; > + > +typedef struct DimmDeviceClass { > + DeviceClass parent_class; > + > + int (*init)(DimmDevice *dev); > +} DimmDeviceClass; > + > +struct DimmDevice { > + DeviceState qdev; > + uint32_t idx; /* index in memory hotplug register/bitmap */ > + ram_addr_t start; /* starting physical address */ > + ram_addr_t size; > + uint32_t node; /* numa node proximity */ > + uint32_t populated; /* 1 means device has been hotplugged. Default is 0. > */ > + MemoryRegion *mr; /* MemoryRegion for this slot. !NULL only if populated > */ > + QTAILQ_ENTRY(DimmDevice) nextdimm; > +}; > + > +typedef struct DimmConfig { > + const char *name; > + uint32_t idx; /* index in linear memory hotplug bitmap */ > + const char *bus_name; > + ram_addr_t start; /* starting physical address */ > + ram_addr_t size; > + uint32_t node; /* numa node proximity */ > + uint32_t populated; /* 1 means device has been hotplugged. Default is 0. > */ > + QTAILQ_ENTRY(DimmConfig) nextdimmcfg; > +} DimmConfig; > + > +typedef int (*dimm_hotplug_fn)(DeviceState *qdev, DimmDevice *dev, int add); > +typedef hwaddr(*dimm_calcoffset_fn)(DeviceState *dev, uint64_t size); > + > +#define TYPE_DIMM_BUS "dimmbus" > +#define DIMM_BUS(obj) OBJECT_CHECK(DimmBus, (obj), TYPE_DIMM_BUS) > + > +typedef struct DimmBus { > + BusState qbus; > + DeviceState *dimm_hotplug_qdev; > + dimm_hotplug_fn dimm_hotplug; > + DimmConfiglist dimmconfig_list; > + QTAILQ_HEAD(Dimmlist, DimmDevice) dimmlist; > + QLIST_ENTRY(DimmBus) next; > +} DimmBus; > + > +struct dimm_hp_result { > + const char *dimmname; > + dimm_hp_result_code ret; > + QTAILQ_ENTRY(dimm_hp_result) next; > +}; > + > +void dimm_bus_hotplug(dimm_hotplug_fn hotplug, DeviceState *qdev); > +void dimm_setup_fwcfg_layout(uint64_t *fw_cfg_slots); > +int dimm_add(char *id); > +DimmBus *dimm_bus_create(Object *parent, const char *name, uint32_t > max_dimms, > + dimm_calcoffset_fn pmc_set_offset); > +void dimm_config_create(char *id, uint64_t size, const char *bus, uint64_t > node, > + uint32_t dimm_idx, uint32_t populated); > + > +#endif _______________________________________________ SeaBIOS mailing list SeaBIOS@seabios.org http://www.seabios.org/mailman/listinfo/seabios