On Wed, 2013-03-27 at 23:45 -0700, Nicholas A. Bellinger wrote: > On Wed, 2013-03-27 at 15:33 -0700, Nicholas A. Bellinger wrote: > > On Wed, 2013-03-27 at 23:56 +0200, Michael S. Tsirkin wrote: > > > On Wed, Mar 27, 2013 at 02:31:27PM -0700, Nicholas A. Bellinger wrote:
<SNIP> Adding a bit more detailed seabios PCI setup info, and make_bios_readonly_intel() debug output for Kevin & Co to review. > > > > > I still do not understand how this happened. Somehow a memory region > > > was deleted after vhost_dev_start but before vhost_virtqueue_start was > > > called? > > > > Not sure.. > > > > To clarify, this is only happening during seabios setup+scan of > > virtio-scsi, and not during normal virtio_scsi LLD operation. > > > > > Can you set a breakpoint there and see please? > > > > > > > > > > A bit more context here.. > > After debugging seabios this evening, I've isolated the spot where > things begin to go south for vhost_verify_ring_mappings check() > > Below are logs from qemu + seabios serial output mixed to (attempt) to > demonstrate what's going on.. > > root@tifa:/usr/src# qemu-system-x86_64 -enable-kvm -smp 4 -m 2048 > -serial file:/tmp/vhost-serial.txt > -hda /usr/src/qemu-paolo.git/debian_squeeze_amd64_standard.qcow2 -device > vhost-scsi-pci,wwpn=naa.600140579ad21088 > qemu-system-x86_64: pci_add_option_rom: failed to find romfile "efi-e1000.rom" > Calling ->region_add: section.size: 655360 > vhost_set_memory: section: 0x7fff962c2580 section->size: 655360 add: 1 > Calling ->region_add: section.size: 131072 > Calling ->region_add: section.size: 131072 > vhost_set_memory: section: 0x7fff962c2580 section->size: 131072 add: 1 > Calling ->region_add: section.size: 131072 > vhost_set_memory: section: 0x7fff962c2580 section->size: 131072 add: 1 > Calling ->region_add: section.size: 2146435072 > vhost_set_memory: section: 0x7fff962c2580 section->size: 2146435072 add: 1 > Calling ->region_add: section.size: 4096 > Calling ->region_add: section.size: 1024 > Calling ->region_add: section.size: 1048576 > Calling ->region_add: section.size: 262144 > vhost_set_memory: section: 0x7fff962c2580 section->size: 262144 add: 1 > vhost_scsi_init_pci Before virtio_init_pci > virtio_init_pci: size: 60 > virtio_init_pci: new size: 64 > vhost_set_memory: section: 0x7fe2801f2b60 section->size: 131072 add: 0 > vhost_set_memory: section: 0x7fe2801f2aa0 section->size: 32768 add: 1 > vhost_set_memory: section: 0x7fe2801f2aa0 section->size: 98304 add: 1 > vhost_set_memory: section: 0x7fe2801f2b60 section->size: 32768 add: 0 > vhost_set_memory: section: 0x7fe2801f2b60 section->size: 98304 add: 0 > vhost_set_memory: section: 0x7fe2801f2aa0 section->size: 65536 add: 1 > vhost_set_memory: section: 0x7fe2801f2aa0 section->size: 65536 add: 1 > vhost_set_memory: section: 0x7fe2801f2b60 section->size: 65536 add: 0 > vhost_set_memory: section: 0x7fe2801f2b60 section->size: 65536 add: 0 > vhost_set_memory: section: 0x7fe2801f2aa0 section->size: 98304 add: 1 > vhost_set_memory: section: 0x7fe2801f2aa0 section->size: 32768 add: 1 > vhost_set_memory: section: 0x7fe2801f2b60 section->size: 98304 add: 0 > vhost_set_memory: section: 0x7fe2801f2b60 section->size: 32768 add: 0 > vhost_set_memory: section: 0x7fe2801f2aa0 section->size: 131072 add: 1 > vhost_set_memory: section: 0x7fe2801f2b60 section->size: 131072 add: 0 > vhost_set_memory: section: 0x7fe2801f2b60 section->size: 131072 add: 0 > vhost_set_memory: section: 0x7fe2801f2aa0 section->size: 163840 add: 1 > vhost_set_memory: section: 0x7fe2801f2aa0 section->size: 98304 add: 1 > vhost_set_memory: section: 0x7fe2801f2b60 section->size: 163840 add: 0 > vhost_set_memory: section: 0x7fe2801f2b60 section->size: 98304 add: 0 > vhost_set_memory: section: 0x7fe2801f2aa0 section->size: 196608 add: 1 > vhost_set_memory: section: 0x7fe2801f2aa0 section->size: 65536 add: 1 > vhost_set_memory: section: 0x7fe2801f2b60 section->size: 196608 add: 0 > vhost_set_memory: section: 0x7fe2801f2b60 section->size: 65536 add: 0 > vhost_set_memory: section: 0x7fe2801f2b60 section->size: 2146435072 add: 0 > vhost_set_memory: section: 0x7fe2801f2aa0 section->size: 2146697216 add: 1 > vhost_set_memory: section: 0x7fe2801f29f0 section->size: 65536 add: 1 > vhost_set_memory: section: 0x7fe2801f2ab0 section->size: 65536 add: 0 > vhost_set_memory: section: 0x7fe2801f2a70 section->size: 8388608 add: 1 > Entering vhost_dev_start >>>>>>>>>>>>>>>>>>>>>. > Before vhost_virtqueue_start >>>>>>>>>>>>>>>>>>>>>>>>>>. > After vhost_virtqueue_start >>>>>>>>>>>>>>>>>>>>>>>>>>. > > <Start seabios serial output from init virtio-scsi code> > === PCI device probing === PCI probe PCI device 00:00.0 (vd=8086:1237 c=0600) PCI device 00:01.0 (vd=8086:7000 c=0601) PCI device 00:01.1 (vd=8086:7010 c=0101) PCI device 00:01.3 (vd=8086:7113 c=0680) PCI device 00:02.0 (vd=1013:00b8 c=0300) PCI device 00:03.0 (vd=8086:100e c=0200) PCI device 00:04.0 (vd=1af4:1004 c=0100) Found 7 PCI devices (max PCI bus is 00) === PCI new allocation pass #1 === PCI: check devices === PCI new allocation pass #2 === PCI: map device bdf=00:03.0 bar 1, addr 0000c000, size 00000040 [io] PCI: map device bdf=00:04.0 bar 0, addr 0000c040, size 00000040 [io] PCI: map device bdf=00:01.1 bar 4, addr 0000c080, size 00000010 [io] PCI: map device bdf=00:03.0 bar 0, addr febc0000, size 00020000 [mem] PCI: map device bdf=00:02.0 bar 6, addr febe0000, size 00010000 [mem] PCI: map device bdf=00:02.0 bar 1, addr febf0000, size 00001000 [mem] PCI: map device bdf=00:04.0 bar 1, addr febf1000, size 00001000 [mem] PCI: map device bdf=00:02.0 bar 0, addr fc000000, size 02000000 [prefmem] PCI: init bdf=00:00.0 id=8086:1237 PCI: init bdf=00:01.0 id=8086:7000 PIIX3/PIIX4 init: elcr=00 0c PCI: init bdf=00:01.1 id=8086:7010 PCI: init bdf=00:01.3 id=8086:7113 Using pmtimer, ioport 0xb008, freq 3579 kHz PCI: init bdf=00:02.0 id=1013:00b8 PCI: init bdf=00:03.0 id=8086:100e PCI: init bdf=00:04.0 id=1af4:1004 > init virtio-scsi > found virtio-scsi at 0:4 init virtio-scsi found virtio-scsi at 0:4 init_virtio_scsi: ioaddr: 0xc040 > Searching bootorder for: /pci@i0cf8/*@4/*@0/*@0,0 > Entering virtio_scsi_cmd: 0x12 > |7ffdc000| ata0-0: QEMU HARDDISK ATA-7 Hard-Disk (16384 MiBytes) > |7ffdc000| Searching bootorder for: /pci@i0cf8/*@1,1/drive@0/disk@0 > |7ffdc000| Registering bootable: ata0-0: QEMU HARDDISK ATA-7 Hard-Disk (16384 > MiBytes) (type:2 prio:101 data:f4ab0) > \7ffdc000/ End thread > |7ffdb000| DVD/CD [ata1-0: QEMU DVD-ROM ATAPI-4 DVD/CD] > |7ffdb000| Searching bootorder for: /pci@i0cf8/*@1,1/drive@1/disk@0 > |7ffdb000| Registering bootable: DVD/CD [ata1-0: QEMU DVD-ROM ATAPI-4 DVD/CD] > (type:3 prio:103 data:f4a80) > \7ffdb000/ End thread > Searching bootorder for: /pci@i0cf8/*@4/*@0/*@1,0 > Entering virtio_scsi_cmd: 0x12 > virtio-scsi vendor='LIO-ORG' product='RAMDISK-MCP' rev='4.0' type=0 > removable=0 > Entering virtio_scsi_cmd: 0x00 > Entering virtio_scsi_cmd: 0x25 > virtio-scsi blksize=512 sectors=524288 > Registering bootable: virtio-scsi Drive LIO-ORG RAMDISK-MCP 4.0 (type:2 > prio:101 data:f4ae0) > Searching bootorder for: /pci@i0cf8/*@4/*@0/*@2,0 > Entering virtio_scsi_cmd: 0x12 > > <SNIP> target IDs up to 256... > > init lsi53c895a > init esp > init megasas > Scan for option roms > Attempting to init PCI bdf 00:00.0 (vd 8086:1237) > Attempting to init PCI bdf 00:01.0 (vd 8086:7000) > Attempting to init PCI bdf 00:01.3 (vd 8086:7113) > Attempting to init PCI bdf 00:03.0 (vd 8086:100e) > Attempting to init PCI bdf 00:04.0 (vd 1af4:1004) > Searching bootorder for: /rom@genroms/kvmvapic.bin > Registering bootable: Legacy option rom (type:129 prio:101 data:c9000003) > Before prepareboot >>>>>>>>>>>>>>>. > Searching bootorder for: HALT > Mapping hd drive 0x000f4ab0 to 0 > drive 0x000f4ab0: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 s=33554432 > Mapping hd drive 0x000f4ae0 to 1 > drive 0x000f4ae0: PCHS=0/0/0 translation=lba LCHS=520/16/63 s=524288 > Running option rom at c900:0003 > Mapping floppy drive 0x000f4b40 > Mapping cd drive 0x000f4a80 > finalize PMM > malloc finalize > Space available for UMB: cb800-ec000, f4690-f4a50 > Returned 57344 bytes of ZoneHigh > e820 map has 7 items: > 0: 0000000000000000 - 000000000009fc00 = 1 RAM > 1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED > 2: 00000000000f0000 - 0000000000100000 = 2 RESERVED > 3: 0000000000100000 - 000000007fffe000 = 1 RAM > 4: 000000007fffe000 - 0000000080000000 = 2 RESERVED > 5: 00000000feffc000 - 00000000ff000000 = 2 RESERVED > 6: 00000000fffc0000 - 0000000100000000 = 2 RESERVED > Before make_bios_readonly >>>>>>> > locking shadow ram > Calling pci_config_writeb(0x11): bdf: 0x0000 pam: 0x0000005a > ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ > locking shadow ram romend: 0x000cb800 romtop: 0x000ec000 mem: 0x000c0000, pam: 0x0000005a Calling pci_config_writeb(0x11): bdf: 0x0000 pam: 0x0000005a > <No QEMU output after pci_config_writeb(0x11) in make_bios_readonly..> > > Calling pci_config_writeb(0x31): bdf: 0x0000 pam: 0x0000005b > ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ > mem: 0x000c8000, pam: 0x0000005b romend: 0x000cb800 mem + 16*1024: 0x000cc000 romtop: 0x000ec000 mem + 32*1024: 0x000d0000 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> romend: 0x000cb800, mem: 0x000c8000, romtop: 0x000ec000, mem + 16*1024: 0x000cc000 Calling pci_config_writeb(0x31): bdf: 0x0000 pam: 0x0000005b > <QEMU output after pci_config_writeb(0x31) in make_bios_readonly..> > > vhost_set_memory: section: 0x7fe2801f2b60 section->size: 2146697216 add: 0 > Before vhost_verify_ring_mappings: start_addr: c0000 size: 2146697216 > Checking vq: 0 ring_phys: 0 ring_size: 1028 >>>>>>>>>>>>>>>>>>. > Got ranges_overlap for vq: 0 ring_phys: 0 ring_size: 1028 > Checking vq: 1 ring_phys: 0 ring_size: 1028 >>>>>>>>>>>>>>>>>>. > Got ranges_overlap for vq: 1 ring_phys: 0 ring_size: 1028 > Checking vq: 2 ring_phys: ed000 ring_size: 5124 >>>>>>>>>>>>>>>>>>. > Calling l: 5124 for start_addr: c0000 for vq 2 > Unable to map ring buffer for ring 2 > l: 4096 ring_size: 5124 > vhost_set_memory: section: 0x7fe2801f2aa0 section->size: 32768 add: 1 > Before vhost_verify_ring_mappings: start_addr: c0000 size: 32768 > Checking vq: 0 ring_phys: 0 ring_size: 1028 >>>>>>>>>>>>>>>>>>. > Got ranges_overlap for vq: 0 ring_phys: 0 ring_size: 1028 > Checking vq: 1 ring_phys: 0 ring_size: 1028 >>>>>>>>>>>>>>>>>>. > Got ranges_overlap for vq: 1 ring_phys: 0 ring_size: 1028 > Checking vq: 2 ring_phys: ed000 ring_size: 5124 >>>>>>>>>>>>>>>>>>. > Got ranges_overlap for vq: 2 ring_phys: ed000 ring_size: 5124 > vhost_set_memory: section: 0x7fe2801f2aa0 section->size: 2146664448 add: 1 > Before vhost_verify_ring_mappings: start_addr: c8000 size: 2146664448 > Checking vq: 0 ring_phys: 0 ring_size: 1028 >>>>>>>>>>>>>>>>>>. > Got ranges_overlap for vq: 0 ring_phys: 0 ring_size: 1028 > Checking vq: 1 ring_phys: 0 ring_size: 1028 >>>>>>>>>>>>>>>>>>. > Got ranges_overlap for vq: 1 ring_phys: 0 ring_size: 1028 > Checking vq: 2 ring_phys: ed000 ring_size: 5124 >>>>>>>>>>>>>>>>>>. > Calling l: 5124 for start_addr: c8000 for vq 2 > > <Seabios output> > > Calling pci_config_writeb(0x10): bdf: 0x0000 pam0: 0x00000059 > ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ > > <<QEMU output for the pci_config_writeb(0x10) in make_bios_readonly..> > > vhost_set_memory: section: 0x7fe2801f2b60 section->size: 32768 add: 0 > Before vhost_verify_ring_mappings: start_addr: c0000 size: 32768 > Checking vq: 0 ring_phys: 0 ring_size: 1028 >>>>>>>>>>>>>>>>>>. > Got ranges_overlap for vq: 0 ring_phys: 0 ring_size: 1028 > Checking vq: 1 ring_phys: 0 ring_size: 1028 >>>>>>>>>>>>>>>>>>. > Got ranges_overlap for vq: 1 ring_phys: 0 ring_size: 1028 > Checking vq: 2 ring_phys: ed000 ring_size: 5124 >>>>>>>>>>>>>>>>>>. > Got ranges_overlap for vq: 2 ring_phys: ed000 ring_size: 5124 > vhost_set_memory: section: 0x7fe2801f2b60 section->size: 2146664448 add: 0 > Before vhost_verify_ring_mappings: start_addr: c8000 size: 2146664448 > Checking vq: 0 ring_phys: 0 ring_size: 1028 >>>>>>>>>>>>>>>>>>. > Got ranges_overlap for vq: 0 ring_phys: 0 ring_size: 1028 > Checking vq: 1 ring_phys: 0 ring_size: 1028 >>>>>>>>>>>>>>>>>>. > Got ranges_overlap for vq: 1 ring_phys: 0 ring_size: 1028 > Checking vq: 2 ring_phys: ed000 ring_size: 5124 >>>>>>>>>>>>>>>>>>. > Calling l: 5124 for start_addr: c8000 for vq 2 > Unable to map ring buffer for ring 2 > l: 0 ring_size: 5124 > vhost_set_memory: section: 0x7fe2801f2aa0 section->size: 36864 add: 1 > Before vhost_verify_ring_mappings: start_addr: c0000 size: 36864 > Checking vq: 0 ring_phys: 0 ring_size: 1028 >>>>>>>>>>>>>>>>>>. > Got ranges_overlap for vq: 0 ring_phys: 0 ring_size: 1028 > Checking vq: 1 ring_phys: 0 ring_size: 1028 >>>>>>>>>>>>>>>>>>. > Got ranges_overlap for vq: 1 ring_phys: 0 ring_size: 1028 > Checking vq: 2 ring_phys: ed000 ring_size: 5124 >>>>>>>>>>>>>>>>>>. > Got ranges_overlap for vq: 2 ring_phys: ed000 ring_size: 5124 > vhost_set_memory: section: 0x7fe2801f2aa0 section->size: 2146660352 add: 1 > Before vhost_verify_ring_mappings: start_addr: c9000 size: 2146660352 > Checking vq: 0 ring_phys: 0 ring_size: 1028 >>>>>>>>>>>>>>>>>>. > Got ranges_overlap for vq: 0 ring_phys: 0 ring_size: 1028 > Checking vq: 1 ring_phys: 0 ring_size: 1028 >>>>>>>>>>>>>>>>>>. > Got ranges_overlap for vq: 1 ring_phys: 0 ring_size: 1028 > Checking vq: 2 ring_phys: ed000 ring_size: 5124 >>>>>>>>>>>>>>>>>>. > Calling l: 5124 for start_addr: c9000 for vq 2 > > <Seabios calls into StartBoot, and the last bit of QEMU output> > > vhost_set_memory: section: 0x7fe2801f2b60 section->size: 2146660352 add: 0 > Before vhost_verify_ring_mappings: start_addr: c9000 size: 2146660352 > Checking vq: 0 ring_phys: 0 ring_size: 1028 >>>>>>>>>>>>>>>>>>. > Got ranges_overlap for vq: 0 ring_phys: 0 ring_size: 1028 > Checking vq: 1 ring_phys: 0 ring_size: 1028 >>>>>>>>>>>>>>>>>>. > Got ranges_overlap for vq: 1 ring_phys: 0 ring_size: 1028 > Checking vq: 2 ring_phys: ed000 ring_size: 5124 >>>>>>>>>>>>>>>>>>. > Calling l: 5124 for start_addr: c9000 for vq 2 > Unable to map ring buffer for ring 2 > l: 0 ring_size: 5124 > vhost_set_memory: section: 0x7fe2801f2aa0 section->size: 159744 add: 1 > Before vhost_verify_ring_mappings: start_addr: c9000 size: 159744 > Checking vq: 0 ring_phys: 0 ring_size: 1028 >>>>>>>>>>>>>>>>>>. > Got ranges_overlap for vq: 0 ring_phys: 0 ring_size: 1028 > Checking vq: 1 ring_phys: 0 ring_size: 1028 >>>>>>>>>>>>>>>>>>. > Got ranges_overlap for vq: 1 ring_phys: 0 ring_size: 1028 > Checking vq: 2 ring_phys: ed000 ring_size: 5124 >>>>>>>>>>>>>>>>>>. > Calling l: 5124 for start_addr: c9000 for vq 2 > vhost_set_memory: section: 0x7fe2801f2aa0 section->size: 65536 add: 1 > Before vhost_verify_ring_mappings: start_addr: f0000 size: 65536 > Checking vq: 0 ring_phys: 0 ring_size: 1028 >>>>>>>>>>>>>>>>>>. > Got ranges_overlap for vq: 0 ring_phys: 0 ring_size: 1028 > Checking vq: 1 ring_phys: 0 ring_size: 1028 >>>>>>>>>>>>>>>>>>. > Got ranges_overlap for vq: 1 ring_phys: 0 ring_size: 1028 > Checking vq: 2 ring_phys: ed000 ring_size: 5124 >>>>>>>>>>>>>>>>>>. > Got ranges_overlap for vq: 2 ring_phys: ed000 ring_size: 5124 > vhost_set_memory: section: 0x7fe2801f2aa0 section->size: 2146435072 add: 1 > Before vhost_verify_ring_mappings: start_addr: 100000 size: 2146435072 > Checking vq: 0 ring_phys: 0 ring_size: 1028 >>>>>>>>>>>>>>>>>>. > Got ranges_overlap for vq: 0 ring_phys: 0 ring_size: 1028 > Checking vq: 1 ring_phys: 0 ring_size: 1028 >>>>>>>>>>>>>>>>>>. > Got ranges_overlap for vq: 1 ring_phys: 0 ring_size: 1028 > Checking vq: 2 ring_phys: ed000 ring_size: 5124 >>>>>>>>>>>>>>>>>>. > Got ranges_overlap for vq: 2 ring_phys: ed000 ring_size: 5124 > > So not being a seabios expert, this is as far as I've gotten.. One > change that does appear to avoid this behavior is when vp_reset() is > called right after virtio_scsi_scan_target() occurs. (See below) > > Obviously this prevents virtio-scsi root device operation, but it seems > to be a hint that some left-over PCI config space is triggering the > above in vhost_verify_ring_mappings(). > > WDYT..? > > diff --git a/src/virtio-scsi.c b/src/virtio-scsi.c > index 4de1255..cafefff 100644 > --- a/src/virtio-scsi.c > +++ b/src/virtio-scsi.c > @@ -153,7 +155,10 @@ init_virtio_scsi(struct pci_device *pci) > int i, tot; > for (tot = 0, i = 0; i < 256; i++) > tot += virtio_scsi_scan_target(pci, ioaddr, vq, i); > - > +#if 1 > + /* vhost-scsi-pci needs an vp_reset here, otherwise bad things happen */ > + vp_reset(ioaddr); > +#endif > if (!tot) > goto fail; > > > -- > To unsubscribe from this list: send the line "unsubscribe target-devel" in > the body of a message to majord...@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html _______________________________________________ SeaBIOS mailing list SeaBIOS@seabios.org http://www.seabios.org/mailman/listinfo/seabios
