If qemu is new enough to support acpi table loading, then go move pmbase out of the way. This allows to use the whole 0x1000 -> 0xffff io address space on q35. piix has hotplug ports in the 0xa000 -> 0xafff area, so we can't do the same there.
Signed-off-by: Gerd Hoffmann <kra...@redhat.com> --- src/fw/paravirt.c | 5 +++++ src/fw/pciinit.c | 16 +++++++++------- 2 files changed, 14 insertions(+), 7 deletions(-) diff --git a/src/fw/paravirt.c b/src/fw/paravirt.c index 569fd25..db22ae8 100644 --- a/src/fw/paravirt.c +++ b/src/fw/paravirt.c @@ -440,4 +440,9 @@ void qemu_cfg_init(void) } qemu_cfg_e820(); + + if (romfile_find("etc/table-loader")) { + acpi_pm_base = 0x0600; + dprintf(1, "Moving pm_base to 0x%x\n", acpi_pm_base); + } } diff --git a/src/fw/pciinit.c b/src/fw/pciinit.c index 9ffda49..2e6382f 100644 --- a/src/fw/pciinit.c +++ b/src/fw/pciinit.c @@ -36,6 +36,7 @@ u64 pcimem_start = BUILD_PCIMEM_START; u64 pcimem_end = BUILD_PCIMEM_END; u64 pcimem64_start = BUILD_PCIMEM64_START; u64 pcimem64_end = BUILD_PCIMEM64_END; +u64 pci_io_low_end = 0xa000; struct pci_region_entry { struct pci_device *dev; @@ -404,6 +405,12 @@ static void mch_mem_addr_setup(struct pci_device *dev, void *arg) pcimem_start = addr + size; pci_slot_get_irq = mch_pci_slot_get_irq; + + /* setup io address space */ + if (acpi_pm_base < 0x1000) + pci_io_low_end = 0x10000; + else + pci_io_low_end = acpi_pm_base; } static const struct pci_device_id pci_platform_tbl[] = { @@ -721,16 +728,11 @@ static int pci_bios_init_root_regions_io(struct pci_bus *bus) if (sum < 0x4000) { /* traditional region is big enougth, use it */ r_io->base = 0xc000; - } else if (sum < 0x9000) { + } else if (sum < pci_io_low_end - 0x1000) { /* use the larger region at 0x1000 */ r_io->base = 0x1000; } else { - /* - * Not enougth io address space -> error out. - * - * TODO: on q35 we can move PORT_ACPI_PM_BASE out of - * the way, then use the whole 1000 -> ffff region. - */ + /* not enouth io address space -> error out */ return -1; } dprintf(1, "PCI: IO: %4llx - %4llx\n", r_io->base, r_io->base + sum - 1); -- 1.8.3.1 _______________________________________________ SeaBIOS mailing list SeaBIOS@seabios.org http://www.seabios.org/mailman/listinfo/seabios