On Wed, Jul 16, 2014 at 11:18:21PM +0000, Inez G wrote: > I have setup Coreboot with Seabios to run on a Lenovo X131e laptop. It > works fine, except for the non-responsive keyboard on cold boots. > > With a warm reboot (restart) I can use the laptop keyboard to press F10 and > then specify the number for the operating system/drive I want to boot from. > But with a cold boot (from a previously powered-off state), the laptop > keyboard does not work until I get to the password prompt in linux. So, > with a cold boot, Seabios just defaults to boot from the first device in the > boot order. > > An external USB keyboard, however, works fine (for both cold and warm > reboots) to enter F10 for the boot order and to select the OS/drive I want. > > I tried setting the boot-menu-wait and the ps2-keyboard-spinup options with > times as high as 90 seconds (90,000 milli sec), but the laptop keyboard > still did not work on a cold boot. After the 90 seconds, Seabios just > selects the first device to boot from. > > Any suggestions?
You'll need to obtain the SeaBIOS log and send it to the mailing list. This can usually be done by running "cbmem -c" from Linux after SeaBIOS has booted. Otherwise you'll need to connect a serial cable. -Kevin _______________________________________________ SeaBIOS mailing list SeaBIOS@seabios.org http://www.seabios.org/mailman/listinfo/seabios