Dear Timothy,
thank you for reporting this issue to the SeaBIOS mailing list. Am Montag, den 26.01.2015, 12:57 -0600 schrieb Timothy Pearson: > I have a board here that uses an XGI Volari Z9s integrated graphics > device. The board boots under coreboot and loads Linux, but if I add > the appropriate VGA option ROM (extracted from the vendor BIOS) SeaBIOS > hangs: > > SeaBIOS (version rel-1.7.5-150-g301dd09-20150126_124858-apollo) > Found mainboard ASUS KFSN4-DRE > Relocating init from 0x000e6fe0 to 0x3ff95800 (size 42816) > Found CBFS header at 0xfffffc80 > CPU Mhz=2311 > Found 26 PCI devices (max PCI bus is 05) > Copying MPTABLE from 0x3ffe0400/3ffe0410 to 0x000f1550 > Copying ACPI RSDP from 0x3ffe1400 to 0x000f1520 > Copying SMBIOS entry point from 0x3ffec800 to 0x000f1500 > Using pmtimer, ioport 0x2008 > Scan for VGA option rom > Running option rom at c000:0003 > > The Volari graphics initialise and work properly once Linux has booted > and loaded the appropriate device drivers. For now I have been using > SGABIOS for VGA emulation, however I would like to see the native VGA > work on boot. Is coreboot able to successfully run the Video BIOS? Just add it using the coreboot Kconfig menu. Thanks, Paul
signature.asc
Description: This is a digitally signed message part
_______________________________________________ SeaBIOS mailing list [email protected] http://www.seabios.org/mailman/listinfo/seabios
