Booting with 1 x Phillips USB and 1 x Ventura Ultra attached to the Pixel 2015
I've attached the cbmem -c from Pixel Samus, after a cold boot into Arch Linux and also following a reboot immediately after. After a reboot, following a boot, the Philips USB now only appears just the once, and not twice as on a cold boot. I've attached a third cbmem -c, from John Lewis 11.11.15 SeaBIOS RW_LEGACY for the Pixel Samus. ************************ * SAMUS - cold boot ************************ $ cbmem -c http://pastebin.com/Z0GK1YPP ************************ * SAMUS - reboot ************************ $ cbmem -c http://pastebin.com/cXhY6nvB ********************************** * J.LEWIS 11.11.15 cold boot ********************************** - same behaviour with JLEWIS on a cold boot and a reboot - no different $ cbmem -c http://pastebin.com/6XhANLkR Edward On Mon, Nov 30, 2015 at 2:02 AM, Kevin O'Connor <ke...@koconnor.net> wrote: > On Sun, Nov 29, 2015 at 01:40:08AM +0000, edward wandasiewicz wrote: >> Running SeaBIOS on a Chromebook Pixel 2015, by default, does not >> recognise a plugged in USB 3.0 device attached to a USB 3.0 port or >> Type C port. > > In order for us to investigate an issue, we need to see the debug log. > For chromebooks, this is normally obtained by booting a Linux OS from > SeaBIOS and running "cbmem -c". It will likely be necessary to > download and compile the cbmem utility from the coreboot source code. > > Once you have the log, please email both a success and failure case to > this mail list. > > There is also some info at: > > http://www.seabios.org/Debugging > > -Kevin _______________________________________________ SeaBIOS mailing list SeaBIOS@seabios.org http://www.seabios.org/mailman/listinfo/seabios