>On Wed, Dec 02, 2015 at 07:09:36AM +0000, Xulei (Stone) wrote:
>> I move HaveRunPost = 1 to handle_post() (after make_bios_writable()), and
>> I have tested for 1 day with continuously resetting, it seems works well!
>> Does following patch have some side effects?
>
>Thanks. I'll be traveling for the next two weeks. I'll take a look
>when I return.
>
Hi, Kevin:
Welcome journey back! I keep on this problem for about 1 month. Here,
I provide some detail information and wish you could pay a little time
thinking about this.
My test script is very easy:
#!/bin/bash
vmname=$1
while [ 1 ]
do
virsh reset $vmname &
virsh reset $vmname &
sleep 5
done
1. This problem seems have relations with PIC irq0 and host CPU feature:
On one of my host, this problem never happens while on another, it's
very easy to happen (both of hosts have the same kmod,qemu,libvirt and
SeaBIOS, SeaVGABIOS, except for the CPU feature).
2. SeaBIOS log tells me once VM halts at allocate VGA stack, it also has
something
wrong printing handle_smp log.
3. If i disconfig CONFIG_VGA_ALLOCATE_EXTRA_STACK, the VM will halt at Grub
stage,
and SeaVGABIOS log stop at printing "set VGA mode 114", then BIOS will loop
handle_pwhic1.
For now, i guess whether if SeaBIOS can not handle the hardware interrupt
correctly
when a host CPU has some advanced feature (x2apic? avx? xsave? tsc-deadline?).
==========bad SeaBIOS log=========
[2015-12-17 12:37:30] In 32bit resume
[2015-12-17 12:37:30] =====Attempting a hard reboot====
[2015-12-17 12:37:30] SeaBIOS (version
rel-1.8.1-0-g4adadbd-20151217_104405-linux-emBwNn)
[2015-12-17 12:37:30] No Xen hypervisor found.
[2015-12-17 12:37:30] Running on QEMU (i440fx)
[2015-12-17 12:37:30] Running on KVM
[2015-12-17 12:37:30] RamSize: 0x80000000 [cmos]
[2015-12-17 12:37:30] Relocating init from 0x000db230 to 0x7ffad360 (size 76768)
[2015-12-17 12:37:30] Found QEMU fw_cfg
[2015-12-17 12:37:30] RamBlock: addr 0x0000000000000000 len 0x0000000080000000
[e820]
[2015-12-17 12:37:30] Moving pm_base to 0x600
[2015-12-17 12:37:30] boot order:
[2015-12-17 12:37:30] 1: /pci@i0cf8/ide@1,1/drive@0/disk@0
[2015-12-17 12:37:30] 2: HALT
[2015-12-17 12:37:30] maininit
[2015-12-17 12:37:30] platform_hardware_setup
[2015-12-17 12:37:30] init pic
[2015-12-17 12:37:30] pic_setup
[2015-12-17 12:37:30] pic_reset
[2015-12-17 12:37:30] enable_hwirq
[2015-12-17 12:37:30] CPU Mhz=3304
[2015-12-17 12:37:30] enable_hwirq
[2015-12-17 12:37:30] enable_hwirq
[2015-12-17 12:37:30] === PCI bus & bridge init ===
[2015-12-17 12:37:30] PCI: pci_bios_init_bus_rec bus = 0x0
[2015-12-17 12:37:30] === PCI device probing ===
[2015-12-17 12:37:30] Found 6 PCI devices (max PCI bus is 00)
[2015-12-17 12:37:30] === PCI new allocation pass #1 ===
[2015-12-17 12:37:30] PCI: check devices
[2015-12-17 12:37:30] === PCI new allocation pass #2 ===
[2015-12-17 12:37:30] PCI: IO: c000 - c02f
[2015-12-17 12:37:30] PCI: 32: 0000000080000000 - 00000000fec00000
[2015-12-17 12:37:30] PCI: map device bdf=00:01.2 bar 4, addr 0000c000, size
00000020 [io]
[2015-12-17 12:37:30] PCI: map device bdf=00:01.1 bar 4, addr 0000c020, size
00000010 [io]
[2015-12-17 12:37:30] PCI: map device bdf=00:02.0 bar 6, addr febe0000, size
00010000 [mem]
[2015-12-17 12:37:30] PCI: map device bdf=00:02.0 bar 1, addr febf0000, size
00001000 [mem]
[2015-12-17 12:37:30] PCI: map device bdf=00:02.0 bar 0, addr fc000000, size
02000000 [prefmem]
[2015-12-17 12:37:30] PCI: init bdf=00:00.0 id=8086:1237
[2015-12-17 12:37:30] PCI: init bdf=00:01.0 id=8086:7000
[2015-12-17 12:37:30] PIIX3/PIIX4 init: elcr=00 0c
[2015-12-17 12:37:30] PCI: init bdf=00:01.1 id=8086:7010
[2015-12-17 12:37:30] PCI: init bdf=00:01.2 id=8086:7020
[2015-12-17 12:37:30] PCI: init bdf=00:01.3 id=8086:7113
[2015-12-17 12:37:30] Using pmtimer, ioport 0x608
[2015-12-17 12:37:30] PCI: init bdf=00:02.0 id=1013:00b8
[2015-12-17 12:37:30] PCI: Using 00:02.0 for primary VGA
[2015-12-17 12:37:30] handle_hshamanpnd:dl leae_p_sismcmp_p:i: d a=ap3
<<======= here, seems abnormal!
[2015-12-17 12:37:30] ièf[cf_^ifd_=f3
[2015-12-17 12:37:30] èf[f^f_f]fÃÍ^XË<90>Found 4 cpu(s) max supported 4 cpu(s)
[2015-12-17 12:37:30] Copying PIR from 0x7ffbea18 to 0x000f5700
[2015-12-17 12:37:30] Copying MPTABLE from 0x00006e30/7ffa42c0 to 0x000f55e0
[2015-12-17 12:37:30] Copying SMBIOS entry point from 0x00006e11 to 0x000f55c0
[2015-12-17 12:37:31] Scan for VGA option rom
[2015-12-17 12:37:31] Running option rom at c000:0003
[2015-12-17 12:37:31] Start SeaVGABIOS (version
rel-1.8.1-0-g4adadbd-20150316_085902-nilsson.home.kraxel.org)
[2015-12-17 12:37:31] enter vga_post:
[2015-12-17 12:37:31] a=00000010 b=0000ffff c=00000000 d=0000ffff ds=0000
es=f000 ss=0000
[2015-12-17 12:37:31] si=00000000 di=000057e0 bp=00000000 sp=00006dbe cs=f000
ip=d1fb f=0000
[2015-12-17 12:37:31] cirrus init
[2015-12-17 12:37:31] cirrus init 2
[2015-12-17 12:37:31] Attempting to allocate VGA stack via pmm call to
f000:d2a0 <<====== here stuck, loop handle PIC irq0
[2015-12-17 12:37:35] handle_hwpic1 irq=0
[2015-12-17 12:37:35] handle_hwpic1 irq=0
[2015-12-17 12:37:35] handle_hwpic1 irq=0
[2015-12-17 12:37:35] handle_hwpic1 irq=0
[2015-12-17 12:37:35] handle_hwpic1 irq=0
[2015-12-17 12:37:35] handle_hwpic1 irq=0
[2015-12-17 12:37:35] handle_hwpic1 irq=0
[2015-12-17 12:37:35] handle_hwpic1 irq=0
[2015-12-17 12:37:35] handle_hwpic1 irq=0
[2015-12-17 12:37:35] handle_hwpic1 irq=0
... always hanle_hwpic1 irq=0, never ends anymore...
>-Kevin
_______________________________________________
SeaBIOS mailing list
SeaBIOS@seabios.org
http://www.seabios.org/mailman/listinfo/seabios
