Hi,
I was hoping for some feedback for an issue that popped up for some of
our (i.e. Proxmox VE) users [0][1]. In the past we forced smm to be off
for our QEMU/KVM instances, but changed that recently.
For some users (and I was able to reproduce it with a Debian 10 VM) this
lead to a boot loop, when no display or serial display is used. With
smm=off, it boots just fine. When the machine is i440fx, using -no-acpi
also makes it work.
I'm not at all sure if this is a SeaBIOS issue at all, but I'd be glad
for any opinions and suggestions for how to debug it further.
I attached the kvm commands and SeaBIOS debug logs, but they are likely
useless: the one with smm=off and the one without are identical up to
the point where the first reboot happens for the problematic instance.
[0]:
https://forum.proxmox.com/threads/pve-7-0-all-vms-with-cloud-init-seabios-fail-during-boot-process-bootloop-disk-not-found.97310/page-2#post-427129
[1]:
https://forum.proxmox.com/threads/debian-vms-wont-start-anymore.99508/post-429565
Best Regards,
Fabian
root@pve701 ~ # cat run109displaynone.sh
/usr/bin/kvm \
-id 109 \
-name apache \
-no-shutdown \
-chardev 'socket,id=qmp,path=/var/run/qemu-server/109.qmp,server=on,wait=off'
\
-mon 'chardev=qmp,mode=control' \
-chardev 'socket,id=qmp-event,path=/var/run/qmeventd.sock,reconnect=5' \
-mon 'chardev=qmp-event,mode=control' \
-smbios 'type=1,uuid=6edd8656-88c9-4e25-8e0b-0584369c71c8' \
-smp '2,sockets=2,cores=1,maxcpus=2' \
-nodefaults \
-boot
'menu=on,strict=on,reboot-timeout=1000,splash=/usr/share/qemu-server/bootsplash.jpg'
\
-vga none \
-nographic \
-cpu kvm64,enforce,+kvm_pv_eoi,+kvm_pv_unhalt,+lahf_lm,+sep \
-m 512 \
-device 'pci-bridge,id=pci.1,chassis_nr=1,bus=pci.0,addr=0x1e' \
-device 'pci-bridge,id=pci.2,chassis_nr=2,bus=pci.0,addr=0x1f' \
-device 'vmgenid,guid=feff7ec7-7e45-474c-843a-628a6eba91db' \
-device 'piix3-usb-uhci,id=uhci,bus=pci.0,addr=0x1.0x2' \
-device 'usb-tablet,id=tablet,bus=uhci.0,port=1' \
-chardev
'socket,id=serial0,path=/var/run/qemu-server/109.serial0,server=on,wait=off' \
-device 'isa-serial,chardev=serial0' \
-device 'virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3' \
-iscsi 'initiator-name=iqn.1993-08.org.debian:01:7d9a912f961' \
-drive 'if=none,id=drive-ide2,media=cdrom,aio=io_uring' \
-device 'ide-cd,bus=ide.1,unit=0,drive=drive-ide2,id=ide2,bootindex=200' \
-device 'virtio-scsi-pci,id=scsihw0,bus=pci.0,addr=0x5' \
-drive
'file=/dev/rbd/rbdkvm/vm-109-disk-1,if=none,id=drive-scsi0,format=raw,cache=none,aio=io_uring,detect-zeroes=on'
\
-device
'scsi-hd,bus=scsihw0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0,id=scsi0,bootindex=100'
\
-netdev
'type=tap,id=net0,ifname=tap109i0,script=/var/lib/qemu-server/pve-bridge,downscript=/var/lib/qemu-server/pve-bridgedown,vhost=on'
\
-device
'virtio-net-pci,mac=5E:D0:2C:1D:C8:4E,netdev=net0,bus=pci.0,addr=0x12,id=net0,bootindex=300'
\
-machine 'type=pc+pve0' \
-chardev 'stdio,id=seabios' -device
'isa-debugcon,iobase=0x402,chardev=seabios'
root@pve701 ~ # sh run109displaynone.sh
SeaBIOS (version rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org)
BUILD: gcc: (GCC) 4.8.5 20150623 (Red Hat 4.8.5-39) binutils: version
2.27-43.base.el7_8.1
No Xen hypervisor found.
Running on QEMU (i440fx)
Running on KVM
Found QEMU fw_cfg
QEMU fw_cfg DMA interface supported
qemu/e820: addr 0x0000000000000000 len 0x0000000020000000 [RAM]
Relocating init from 0x000d4bf0 to 0x1ffa9460 (size 92944)
Moving pm_base to 0x600
boot order:
1: /pci@i0cf8/scsi@5/channel@0/disk@0,0
2: /pci@i0cf8/ide@1,1/drive@1/disk@0
3: /pci@i0cf8/ethernet@12/ethernet-phy@0
4: HALT
kvmclock: at 0xeae20 (msr 0x4b564d01)
=== PCI bus & bridge init ===
PCI: pci_bios_init_bus_rec bus = 0x0
PCI: pci_bios_init_bus_rec bdf = 0xf0
PCI: primary bus = 0x0
PCI: secondary bus = 0xff -> 0x1
PCI: pci_bios_init_bus_rec bus = 0x1
PCI: QEMU resource reserve cap not found
PCI: subordinate bus = 0x0 -> 0x1
PCI: pci_bios_init_bus_rec bdf = 0xf8
PCI: primary bus = 0x0
PCI: secondary bus = 0xff -> 0x2
PCI: pci_bios_init_bus_rec bus = 0x2
PCI: QEMU resource reserve cap not found
PCI: subordinate bus = 0x0 -> 0x2
=== PCI device probing ===
Found 10 PCI devices (max PCI bus is 02)
=== PCI new allocation pass #1 ===
PCI: check devices
PCI: QEMU resource reserve cap not found
PCI: secondary bus 2 size 00001000 type io
PCI: secondary bus 2 size 00200000 type mem
PCI: secondary bus 2 size 00200000 type prefmem
PCI: QEMU resource reserve cap not found
PCI: secondary bus 1 size 00001000 type io
PCI: secondary bus 1 size 00200000 type mem
PCI: secondary bus 1 size 00200000 type prefmem
=== PCI new allocation pass #2 ===
PCI: IO: c000 - e0cf
PCI: 32: 0000000080000000 - 00000000fec00000
PCI: map device bdf=00:03.0 bar 0, addr 0000e000, size 00000040 [io]
PCI: map device bdf=00:05.0 bar 0, addr 0000e040, size 00000040 [io]
PCI: map device bdf=00:01.2 bar 4, addr 0000e080, size 00000020 [io]
PCI: map device bdf=00:12.0 bar 0, addr 0000e0a0, size 00000020 [io]
PCI: map device bdf=00:01.1 bar 4, addr 0000e0c0, size 00000010 [io]
PCI: map device bdf=00:12.0 bar 6, addr fe400000, size 00040000 [mem]
PCI: map device bdf=00:05.0 bar 1, addr fe440000, size 00001000 [mem]
PCI: map device bdf=00:12.0 bar 1, addr fe441000, size 00001000 [mem]
PCI: map device bdf=00:1e.0 bar 0, addr fe442000, size 00001000 [mem]
PCI: map device bdf=00:1f.0 bar 0, addr fe443000, size 00001000 [mem]
PCI: map device bdf=00:03.0 bar 4, addr fea00000, size 00004000 [prefmem]
PCI: map device bdf=00:05.0 bar 4, addr fea04000, size 00004000 [prefmem]
PCI: map device bdf=00:12.0 bar 4, addr fea08000, size 00004000 [prefmem]
PCI: init bdf=00:00.0 id=8086:1237
PCI: init bdf=00:01.0 id=8086:7000
PIIX3/PIIX4 init: elcr=00 0c
PCI: init bdf=00:01.1 id=8086:7010
PCI: init bdf=00:01.2 id=8086:7020
PCI: init bdf=00:01.3 id=8086:7113
Using pmtimer, ioport 0x608
PCI: init bdf=00:03.0 id=1af4:1002
PCI: init bdf=00:05.0 id=1af4:1004
PCI: init bdf=00:12.0 id=1af4:1000
PCI: init bdf=00:1e.0 id=1b36:0001
PCI: init bdf=00:1f.0 id=1b36:0001
PCI: No VGA devices found
handle_smp: apic_id=0x1
Found 2 cpu(s) max supported 2 cpu(s)
Copying PIR from 0x1ffbfc8c to 0x000f5b90
Copying MPTABLE from 0x00006d30/1ff9fe20 to 0x000f5a70
Copying SMBIOS entry point from 0x00006d30 to 0x000f5870
table(50434146)=0x1ffe1c86 (via rsdt)
ACPI: parse DSDT at 0x1ffdf040 (len 11334)
Scan for VGA option rom
No VGA found, scan for other display
sercon: using ioport 0x3f8
sercon: configuring as primary display
Turning on vga text mode console
SeaBIOS (version rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org)
Machine UUID 6edd8656-88c9-4e25-8e0b-0584369c71c8
UHCI init on dev 00:01.2 (io=e080)
ATA controller 1 at 1f0/3f4/0 (irq 14 dev 9)
ATA controller 2 at 170/374/0 (irq 15 dev 9)
Searching bootorder for: HALT
Searching bootorder for: /pci@i0cf8/*@5
found virtio-scsi at 00:05.0
pci dev 00:05.0 virtio cap at 0x84 type 5 [pci cfg access]
pci dev 00:05.0 virtio cap at 0x70 type 2 bar 4 at 0xfea04000 off +0x3000 [mmio]
pci dev 00:05.0 virtio cap at 0x60 type 4 bar 4 at 0xfea04000 off +0x2000 [mmio]
pci dev 00:05.0 virtio cap at 0x50 type 3 bar 4 at 0xfea04000 off +0x1000 [mmio]
pci dev 00:05.0 virtio cap at 0x40 type 1 bar 4 at 0xfea04000 off +0x0000 [mmio]
pci dev 00:05.0 using modern (1.0) virtio mode
Searching bootorder for: /pci@i0cf8/*@5/*@0/*@0,0
Searching bios-geometry for: /pci@i0cf8/*@5/*@0/*@0,0
virtio-scsi vendor='QEMU' product='QEMU HARDDISK' rev='2.5+' type=0 removable=0
virtio-scsi blksize=512 sectors=8388608
DVD/CD [ata1-0: QEMU DVD-ROM ATAPI-4 DVD/CD]
Searching bootorder for: /pci@i0cf8/*@1,1/drive@1/disk@0
Searching bios-geometry for: /pci@i0cf8/*@1,1/drive@1/disk@0
Device reports MEDIUM NOT PRESENT
Found 0 lpt ports
Found 1 serial ports
PS2 keyboard initialized
All threads complete.
Scan for option roms
Running option rom at c000:0003
pmm call arg1=1
pmm call arg1=0
pmm call arg1=1
pmm call arg1=0
Searching bootorder for: /pci@i0cf8/*@12
Searching bootorder for: /rom@genroms/kvmvapic.bin
Press ESC for boot menu.
No VBE2 found.
Searching bootorder for: HALT
drive 0x000eadd0: PCHS=0/0/0 translation=lba LCHS=522/255/63 s=8388608
Running option rom at c100:0003
Space available for UMB: c3800-ea000, f5410-f57b0
Returned 106496 bytes of ZoneHigh
e820 map has 7 items:
0: 0000000000000000 - 000000000009fc00 = 1 RAM
1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED
2: 00000000000f0000 - 0000000000100000 = 2 RESERVED
3: 0000000000100000 - 000000001ffda000 = 1 RAM
4: 000000001ffda000 - 0000000020000000 = 2 RESERVED
5: 00000000feffc000 - 00000000ff000000 = 2 RESERVED
6: 00000000fffc0000 - 0000000100000000 = 2 RESERVED
enter handle_19:
NULL
Booting from Hard Disk...
Booting from 0000:7c00
In resume (status=0)
In 32bit resume
Attempting a hard reboot
SeaBIOS (version rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org)
BUILD: gcc: (GCC) 4.8.5 20150623 (Red Hat 4.8.5-39) binutils: version
2.27-43.base.el7_8.1
No Xen hypervisor found.
Running on QEMU (i440fx)
Running on KVM
Found QEMU fw_cfg
QEMU fw_cfg DMA interface supported
qemu/e820: addr 0x0000000000000000 len 0x0000000020000000 [RAM]
Relocating init from 0x000d4bf0 to 0x1ffa9460 (size 92944)
Moving pm_base to 0x600
boot order:
1: /pci@i0cf8/scsi@5/channel@0/disk@0,0
2: /pci@i0cf8/ide@1,1/drive@1/disk@0
3: /pci@i0cf8/ethernet@12/ethernet-phy@0
4: HALT
kvmclock: at 0xeae20 (msr 0x4b564d01)
=== PCI bus & bridge init ===
PCI: pci_bios_init_bus_rec bus = 0x0
PCI: pci_bios_init_bus_rec bdf = 0xf0
PCI: primary bus = 0x0
PCI: secondary bus = 0xff -> 0x1
PCI: pci_bios_init_bus_rec bus = 0x1
PCI: QEMU resource reserve cap not found
PCI: subordinate bus = 0x0 -> 0x1
PCI: pci_bios_init_bus_rec bdf = 0xf8
PCI: primary bus = 0x0
PCI: secondary bus = 0xff -> 0x2
PCI: pci_bios_init_bus_rec bus = 0x2
PCI: QEMU resource reserve cap not found
PCI: subordinate bus = 0x0 -> 0x2
=== PCI device probing ===
Found 10 PCI devices (max PCI bus is 02)
=== PCI new allocation pass #1 ===
PCI: check devices
PCI: QEMU resource reserve cap not found
PCI: secondary bus 2 size 00001000 type io
PCI: secondary bus 2 size 00200000 type mem
PCI: secondary bus 2 size 00200000 type prefmem
PCI: QEMU resource reserve cap not found
PCI: secondary bus 1 size 00001000 type io
PCI: secondary bus 1 size 00200000 type mem
PCI: secondary bus 1 size 00200000 type prefmem
=== PCI new allocation pass #2 ===
PCI: IO: c000 - e0cf
PCI: 32: 0000000080000000 - 00000000fec00000
PCI: map device bdf=00:03.0 bar 0, addr 0000e000, size 00000040 [io]
PCI: map device bdf=00:05.0 bar 0, addr 0000e040, size 00000040 [io]
PCI: map device bdf=00:01.2 bar 4, addr 0000e080, size 00000020 [io]
PCI: map device bdf=00:12.0 bar 0, addr 0000e0a0, size 00000020 [io]
PCI: map device bdf=00:01.1 bar 4, addr 0000e0c0, size 00000010 [io]
PCI: map device bdf=00:12.0 bar 6, addr fe400000, size 00040000 [mem]
PCI: map device bdf=00:05.0 bar 1, addr fe440000, size 00001000 [mem]
PCI: map device bdf=00:12.0 bar 1, addr fe441000, size 00001000 [mem]
PCI: map device bdf=00:1e.0 bar 0, addr fe442000, size 00001000 [mem]
PCI: map device bdf=00:1f.0 bar 0, addr fe443000, size 00001000 [mem]
PCI: map device bdf=00:03.0 bar 4, addr fea00000, size 00004000 [prefmem]
PCI: map device bdf=00:05.0 bar 4, addr fea04000, size 00004000 [prefmem]
PCI: map device bdf=00:12.0 bar 4, addr fea08000, size 00004000 [prefmem]
PCI: init bdf=00:00.0 id=8086:1237
PCI: init bdf=00:01.0 id=8086:7000
PIIX3/PIIX4 init: elcr=00 0c
PCI: init bdf=00:01.1 id=8086:7010
PCI: init bdf=00:01.2 id=8086:7020
PCI: init bdf=00:01.3 id=8086:7113
Using pmtimer, ioport 0x608
PCI: init bdf=00:03.0 id=1af4:1002
PCI: init bdf=00:05.0 id=1af4:1004
PCI: init bdf=00:12.0 id=1af4:1000
PCI: init bdf=00:1e.0 id=1b36:0001
PCI: init bdf=00:1f.0 id=1b36:0001
PCI: No VGA devices found
handle_smp: apic_id=0x1
Found 2 cpu(s) max supported 2 cpu(s)
Copying PIR from 0x1ffbfc8c to 0x000f5b90
Copying MPTABLE from 0x00006d30/1ff9fe20 to 0x000f5a70
Copying SMBIOS entry point from 0x00006d30 to 0x000f5870
table(50434146)=0x1ffe1c86 (via rsdt)
ACPI: parse DSDT at 0x1ffdf040 (len 11334)
Scan for VGA option rom
No VGA found, scan for other display
sercon: using ioport 0x3f8
sercon: configuring as primary display
Turning on vga text mode console
SeaBIOS (version rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org)
Machine UUID 6edd8656-88c9-4e25-8e0b-0584369c71c8
UHCI init on dev 00:01.2 (io=e080)
ATA controller 1 at 1f0/3f4/0 (irq 14 dev 9)
ATA controller 2 at 170/374/0 (irq 15 dev 9)
Searching bootorder for: HALT
Searching bootorder for: /pci@i0cf8/*@5
found virtio-scsi at 00:05.0
pci dev 00:05.0 virtio cap at 0x84 type 5 [pci cfg access]
pci dev 00:05.0 virtio cap at 0x70 type 2 bar 4 at 0xfea04000 off +0x3000 [mmio]
pci dev 00:05.0 virtio cap at 0x60 type 4 bar 4 at 0xfea04000 off +0x2000 [mmio]
pci dev 00:05.0 virtio cap at 0x50 type 3 bar 4 at 0xfea04000 off +0x1000 [mmio]
pci dev 00:05.0 virtio cap at 0x40 type 1 bar 4 at 0xfea04000 off +0x0000 [mmio]
pci dev 00:05.0 using modern (1.0) virtio mode
Searching bootorder for: /pci@i0cf8/*@5/*@0/*@0,0
Searching bios-geometry for: /pci@i0cf8/*@5/*@0/*@0,0
virtio-scsi vendor='QEMU' product='QEMU HARDDISK' rev='2.5+' type=0 removable=0
virtio-scsi blksize=512 sectors=8388608
DVD/CD [ata1-0: QEMU DVD-ROM ATAPI-4 DVD/CD]
Searching bootorder for: /pci@i0cf8/*@1,1/drive@1/disk@0
Searching bios-geometry for: /pci@i0cf8/*@1,1/drive@1/disk@0
Device reports MEDIUM NOT PRESENT
Found 0 lpt ports
Found 1 serial ports
PS2 keyboard initialized
All threads complete.
Scan for option roms
Running option rom at c000:0003
pmm call arg1=1
pmm call arg1=0
pmm call arg1=1
pmm call arg1=0
Searching bootorder for: /pci@i0cf8/*@12
Searching bootorder for: /rom@genroms/kvmvapic.bin
Press ESC for boot menu.
No VBE2 found.
Searching bootorder for: HALT
drive 0x000eadd0: PCHS=0/0/0 translation=lba LCHS=522/255/63 s=8388608
Running option rom at c100:0003
Space available for UMB: c3800-ea000, f5410-f57b0
Returned 106496 bytes of ZoneHigh
e820 map has 7 items:
0: 0000000000000000 - 000000000009fc00 = 1 RAM
1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED
2: 00000000000f0000 - 0000000000100000 = 2 RESERVED
3: 0000000000100000 - 000000001ffda000 = 1 RAM
4: 000000001ffda000 - 0000000020000000 = 2 RESERVED
5: 00000000feffc000 - 00000000ff000000 = 2 RESERVED
6: 00000000fffc0000 - 0000000100000000 = 2 RESERVED
enter handle_19:
NULL
Booting from Hard Disk...
Booting from 0000:7c00
In resume (status=0)
In 32bit resume
Attempting a hard reboot
SeaBIOS (version rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org)
BUILD: gcc: (GCC) 4.8.5 20150623 (Red Hat 4.8.5-39) binutils: version
2.27-43.base.el7_8.1
No Xen hypervisor found.
Running on QEMU (i440fx)
Running on KVM
Found QEMU fw_cfg
QEMU fw_cfg DMA interface supported
qemu/e820: addr 0x0000000000000000 len 0x0000000020000000 [RAM]
Relocating init from 0x000d4bf0 to 0x1ffa9460 (size 92944)
Moving pm_base to 0x600
boot order:
1: /pci@i0cf8/scsi@5/channel@0/disk@0,0
2: /pci@i0cf8/ide@1,1/drive@1/disk@0
3: /pci@i0cf8/ethernet@12/ethernet-phy@0
4: HALT
kvmclock: at 0xeae20 (msr 0x4b564d01)
=== PCI bus & bridge init ===
PCI: pci_bios_init_bus_rec bus = 0x0
PCI: pci_bios_init_bus_rec bdf = 0xf0
PCI: primary bus = 0x0
PCI: secondary bus = 0xff -> 0x1
PCI: pci_bios_init_bus_rec bus = 0x1
PCI: QEMU resource reserve cap not found
PCI: subordinate bus = 0x0 -> 0x1
PCI: pci_bios_init_bus_rec bdf = 0xf8
PCI: primary bus = 0x0
PCI: secondary bus = 0xff -> 0x2
PCI: pci_bios_init_bus_rec bus = 0x2
PCI: QEMU resource reserve cap not found
PCI: subordinate bus = 0x0 -> 0x2
=== PCI device probing ===
Found 10 PCI devices (max PCI bus is 02)
=== PCI new allocation pass #1 ===
PCI: check devices
PCI: QEMU resource reserve cap not found
PCI: secondary bus 2 size 00001000 type io
PCI: secondary bus 2 size 00200000 type mem
PCI: secondary bus 2 size 00200000 type prefmem
PCI: QEMU resource reserve cap not found
PCI: secondary bus 1 size 00001000 type io
PCI: secondary bus 1 size 00200000 type mem
PCI: secondary bus 1 size 00200000 type prefmem
=== PCI new allocation pass #2 ===
PCI: IO: c000 - e0cf
PCI: 32: 0000000080000000 - 00000000fec00000
PCI: map device bdf=00:03.0 bar 0, addr 0000e000, size 00000040 [io]
PCI: map device bdf=00:05.0 bar 0, addr 0000e040, size 00000040 [io]
PCI: map device bdf=00:01.2 bar 4, addr 0000e080, size 00000020 [io]
PCI: map device bdf=00:12.0 bar 0, addr 0000e0a0, size 00000020 [io]
PCI: map device bdf=00:01.1 bar 4, addr 0000e0c0, size 00000010 [io]
PCI: map device bdf=00:12.0 bar 6, addr fe400000, size 00040000 [mem]
PCI: map device bdf=00:05.0 bar 1, addr fe440000, size 00001000 [mem]
PCI: map device bdf=00:12.0 bar 1, addr fe441000, size 00001000 [mem]
PCI: map device bdf=00:1e.0 bar 0, addr fe442000, size 00001000 [mem]
PCI: map device bdf=00:1f.0 bar 0, addr fe443000, size 00001000 [mem]
PCI: map device bdf=00:03.0 bar 4, addr fea00000, size 00004000 [prefmem]
PCI: map device bdf=00:05.0 bar 4, addr fea04000, size 00004000 [prefmem]
PCI: map device bdf=00:12.0 bar 4, addr fea08000, size 00004000 [prefmem]
PCI: init bdf=00:00.0 id=8086:1237
PCI: init bdf=00:01.0 id=8086:7000
PIIX3/PIIX4 init: elcr=00 0c
PCI: init bdf=00:01.1 id=8086:7010
PCI: init bdf=00:01.2 id=8086:7020
PCI: init bdf=00:01.3 id=8086:7113
Using pmtimer, ioport 0x608
PCI: init bdf=00:03.0 id=1af4:1002
PCI: init bdf=00:05.0 id=1af4:1004
PCI: init bdf=00:12.0 id=1af4:1000
PCI: init bdf=00:1e.0 id=1b36:0001
PCI: init bdf=00:1f.0 id=1b36:0001
PCI: No VGA devices found
handle_smp: apic_id=0x1
Found 2 cpu(s) max supported 2 cpu(s)
Copying PIR from 0x1ffbfc8c to 0x000f5b90
Copying MPTABLE from 0x00006d30/1ff9fe20 to 0x000f5a70
Copying SMBIOS entry point from 0x00006d30 to 0x000f5870
table(50434146)=0x1ffe1c86 (via rsdt)
ACPI: parse DSDT at 0x1ffdf040 (len 11334)
Scan for VGA option rom
No VGA found, scan for other display
sercon: using ioport 0x3f8
sercon: configuring as primary display
Turning on vga text mode console
SeaBIOS (version rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org)
Machine UUID 6edd8656-88c9-4e25-8e0b-0584369c71c8
UHCI init on dev 00:01.2 (io=e080)
ATA controller 1 at 1f0/3f4/0 (irq 14 dev 9)
ATA controller 2 at 170/374/0 (irq 15 dev 9)
Searching bootorder for: HALT
Searching bootorder for: /pci@i0cf8/*@5
found virtio-scsi at 00:05.0
pci dev 00:05.0 virtio cap at 0x84 type 5 [pci cfg access]
pci dev 00:05.0 virtio cap at 0x70 type 2 bar 4 at 0xfea04000 off +0x3000 [mmio]
pci dev 00:05.0 virtio cap at 0x60 type 4 bar 4 at 0xfea04000 off +0x2000 [mmio]
pci dev 00:05.0 virtio cap at 0x50 type 3 bar 4 at 0xfea04000 off +0x1000 [mmio]
pci dev 00:05.0 virtio cap at 0x40 type 1 bar 4 at 0xfea04000 off +0x0000 [mmio]
pci dev 00:05.0 using modern (1.0) virtio mode
Searching bootorder for: /pci@i0cf8/*@5/*@0/*@0,0
Searching bios-geometry for: /pci@i0cf8/*@5/*@0/*@0,0
virtio-scsi vendor='QEMU' product='QEMU HARDDISK' rev='2.5+' type=0 removable=0
virtio-scsi blksize=512 sectors=8388608
DVD/CD [ata1-0: QEMU DVD-ROM ATAPI-4 DVD/CD]
Searching bootorder for: /pci@i0cf8/*@1,1/drive@1/disk@0
Searching bios-geometry for: /pci@i0cf8/*@1,1/drive@1/disk@0
Device reports MEDIUM NOT PRESENT
Found 0 lpt ports
Found 1 serial ports
PS2 keyboard initialized
All threads complete.
Scan for option roms
Running option rom at c000:0003
pmm call arg1=1
pmm call arg1=0
pmm call arg1=1
pmm call arg1=0
Searching bootorder for: /pci@i0cf8/*@12
Searching bootorder for: /rom@genroms/kvmvapic.bin
Press ESC for boot menu.
No VBE2 found.
kvm: terminating on signal 2
root@pve701 ~ # cat run109displaynonesmmoff.sh
/usr/bin/kvm \
-id 109 \
-name apache \
-no-shutdown \
-chardev 'socket,id=qmp,path=/var/run/qemu-server/109.qmp,server=on,wait=off'
\
-mon 'chardev=qmp,mode=control' \
-chardev 'socket,id=qmp-event,path=/var/run/qmeventd.sock,reconnect=5' \
-mon 'chardev=qmp-event,mode=control' \
-smbios 'type=1,uuid=6edd8656-88c9-4e25-8e0b-0584369c71c8' \
-smp '2,sockets=2,cores=1,maxcpus=2' \
-nodefaults \
-boot
'menu=on,strict=on,reboot-timeout=1000,splash=/usr/share/qemu-server/bootsplash.jpg'
\
-vga none \
-nographic \
-cpu kvm64,enforce,+kvm_pv_eoi,+kvm_pv_unhalt,+lahf_lm,+sep \
-m 512 \
-device 'pci-bridge,id=pci.1,chassis_nr=1,bus=pci.0,addr=0x1e' \
-device 'pci-bridge,id=pci.2,chassis_nr=2,bus=pci.0,addr=0x1f' \
-device 'vmgenid,guid=feff7ec7-7e45-474c-843a-628a6eba91db' \
-device 'piix3-usb-uhci,id=uhci,bus=pci.0,addr=0x1.0x2' \
-device 'usb-tablet,id=tablet,bus=uhci.0,port=1' \
-chardev
'socket,id=serial0,path=/var/run/qemu-server/109.serial0,server=on,wait=off' \
-device 'isa-serial,chardev=serial0' \
-device 'virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3' \
-iscsi 'initiator-name=iqn.1993-08.org.debian:01:7d9a912f961' \
-drive 'if=none,id=drive-ide2,media=cdrom,aio=io_uring' \
-device 'ide-cd,bus=ide.1,unit=0,drive=drive-ide2,id=ide2,bootindex=200' \
-device 'virtio-scsi-pci,id=scsihw0,bus=pci.0,addr=0x5' \
-drive
'file=/dev/rbd/rbdkvm/vm-109-disk-1,if=none,id=drive-scsi0,format=raw,cache=none,aio=io_uring,detect-zeroes=on'
\
-device
'scsi-hd,bus=scsihw0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0,id=scsi0,bootindex=100'
\
-netdev
'type=tap,id=net0,ifname=tap109i0,script=/var/lib/qemu-server/pve-bridge,downscript=/var/lib/qemu-server/pve-bridgedown,vhost=on'
\
-device
'virtio-net-pci,mac=5E:D0:2C:1D:C8:4E,netdev=net0,bus=pci.0,addr=0x12,id=net0,bootindex=300'
\
-machine 'type=pc+pve0,smm=off' \
-chardev 'stdio,id=seabios' -device
'isa-debugcon,iobase=0x402,chardev=seabios'
root@pve701 ~ # sh run109displaynonesmmoff.sh
SeaBIOS (version rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org)
BUILD: gcc: (GCC) 4.8.5 20150623 (Red Hat 4.8.5-39) binutils: version
2.27-43.base.el7_8.1
No Xen hypervisor found.
Running on QEMU (i440fx)
Running on KVM
Found QEMU fw_cfg
QEMU fw_cfg DMA interface supported
qemu/e820: addr 0x0000000000000000 len 0x0000000020000000 [RAM]
Relocating init from 0x000d4bf0 to 0x1ffa9460 (size 92944)
Moving pm_base to 0x600
boot order:
1: /pci@i0cf8/scsi@5/channel@0/disk@0,0
2: /pci@i0cf8/ide@1,1/drive@1/disk@0
3: /pci@i0cf8/ethernet@12/ethernet-phy@0
4: HALT
kvmclock: at 0xeae20 (msr 0x4b564d01)
=== PCI bus & bridge init ===
PCI: pci_bios_init_bus_rec bus = 0x0
PCI: pci_bios_init_bus_rec bdf = 0xf0
PCI: primary bus = 0x0
PCI: secondary bus = 0xff -> 0x1
PCI: pci_bios_init_bus_rec bus = 0x1
PCI: QEMU resource reserve cap not found
PCI: subordinate bus = 0x0 -> 0x1
PCI: pci_bios_init_bus_rec bdf = 0xf8
PCI: primary bus = 0x0
PCI: secondary bus = 0xff -> 0x2
PCI: pci_bios_init_bus_rec bus = 0x2
PCI: QEMU resource reserve cap not found
PCI: subordinate bus = 0x0 -> 0x2
=== PCI device probing ===
Found 10 PCI devices (max PCI bus is 02)
=== PCI new allocation pass #1 ===
PCI: check devices
PCI: QEMU resource reserve cap not found
PCI: secondary bus 2 size 00001000 type io
PCI: secondary bus 2 size 00200000 type mem
PCI: secondary bus 2 size 00200000 type prefmem
PCI: QEMU resource reserve cap not found
PCI: secondary bus 1 size 00001000 type io
PCI: secondary bus 1 size 00200000 type mem
PCI: secondary bus 1 size 00200000 type prefmem
=== PCI new allocation pass #2 ===
PCI: IO: c000 - e0cf
PCI: 32: 0000000080000000 - 00000000fec00000
PCI: map device bdf=00:03.0 bar 0, addr 0000e000, size 00000040 [io]
PCI: map device bdf=00:05.0 bar 0, addr 0000e040, size 00000040 [io]
PCI: map device bdf=00:01.2 bar 4, addr 0000e080, size 00000020 [io]
PCI: map device bdf=00:12.0 bar 0, addr 0000e0a0, size 00000020 [io]
PCI: map device bdf=00:01.1 bar 4, addr 0000e0c0, size 00000010 [io]
PCI: map device bdf=00:12.0 bar 6, addr fe400000, size 00040000 [mem]
PCI: map device bdf=00:05.0 bar 1, addr fe440000, size 00001000 [mem]
PCI: map device bdf=00:12.0 bar 1, addr fe441000, size 00001000 [mem]
PCI: map device bdf=00:1e.0 bar 0, addr fe442000, size 00001000 [mem]
PCI: map device bdf=00:1f.0 bar 0, addr fe443000, size 00001000 [mem]
PCI: map device bdf=00:03.0 bar 4, addr fea00000, size 00004000 [prefmem]
PCI: map device bdf=00:05.0 bar 4, addr fea04000, size 00004000 [prefmem]
PCI: map device bdf=00:12.0 bar 4, addr fea08000, size 00004000 [prefmem]
PCI: init bdf=00:00.0 id=8086:1237
PCI: init bdf=00:01.0 id=8086:7000
PIIX3/PIIX4 init: elcr=00 0c
PCI: init bdf=00:01.1 id=8086:7010
PCI: init bdf=00:01.2 id=8086:7020
PCI: init bdf=00:01.3 id=8086:7113
Using pmtimer, ioport 0x608
PCI: init bdf=00:03.0 id=1af4:1002
PCI: init bdf=00:05.0 id=1af4:1004
PCI: init bdf=00:12.0 id=1af4:1000
PCI: init bdf=00:1e.0 id=1b36:0001
PCI: init bdf=00:1f.0 id=1b36:0001
PCI: No VGA devices found
handle_smp: apic_id=0x1
Found 2 cpu(s) max supported 2 cpu(s)
Copying PIR from 0x1ffbfc8c to 0x000f5b90
Copying MPTABLE from 0x00006d30/1ff9fe20 to 0x000f5a70
Copying SMBIOS entry point from 0x00006d30 to 0x000f5870
table(50434146)=0x1ffe1c86 (via rsdt)
ACPI: parse DSDT at 0x1ffdf040 (len 11334)
Scan for VGA option rom
No VGA found, scan for other display
sercon: using ioport 0x3f8
sercon: configuring as primary display
Turning on vga text mode console
SeaBIOS (version rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org)
Machine UUID 6edd8656-88c9-4e25-8e0b-0584369c71c8
UHCI init on dev 00:01.2 (io=e080)
ATA controller 1 at 1f0/3f4/0 (irq 14 dev 9)
ATA controller 2 at 170/374/0 (irq 15 dev 9)
Searching bootorder for: HALT
Searching bootorder for: /pci@i0cf8/*@5
found virtio-scsi at 00:05.0
pci dev 00:05.0 virtio cap at 0x84 type 5 [pci cfg access]
pci dev 00:05.0 virtio cap at 0x70 type 2 bar 4 at 0xfea04000 off +0x3000 [mmio]
pci dev 00:05.0 virtio cap at 0x60 type 4 bar 4 at 0xfea04000 off +0x2000 [mmio]
pci dev 00:05.0 virtio cap at 0x50 type 3 bar 4 at 0xfea04000 off +0x1000 [mmio]
pci dev 00:05.0 virtio cap at 0x40 type 1 bar 4 at 0xfea04000 off +0x0000 [mmio]
pci dev 00:05.0 using modern (1.0) virtio mode
Searching bootorder for: /pci@i0cf8/*@5/*@0/*@0,0
Searching bios-geometry for: /pci@i0cf8/*@5/*@0/*@0,0
virtio-scsi vendor='QEMU' product='QEMU HARDDISK' rev='2.5+' type=0 removable=0
virtio-scsi blksize=512 sectors=8388608
DVD/CD [ata1-0: QEMU DVD-ROM ATAPI-4 DVD/CD]
Searching bootorder for: /pci@i0cf8/*@1,1/drive@1/disk@0
Searching bios-geometry for: /pci@i0cf8/*@1,1/drive@1/disk@0
Device reports MEDIUM NOT PRESENT
Found 0 lpt ports
Found 1 serial ports
PS2 keyboard initialized
All threads complete.
Scan for option roms
Running option rom at c000:0003
pmm call arg1=1
pmm call arg1=0
pmm call arg1=1
pmm call arg1=0
Searching bootorder for: /pci@i0cf8/*@12
Searching bootorder for: /rom@genroms/kvmvapic.bin
Press ESC for boot menu.
No VBE2 found.
Searching bootorder for: HALT
drive 0x000eadd0: PCHS=0/0/0 translation=lba LCHS=522/255/63 s=8388608
Running option rom at c100:0003
Space available for UMB: c3800-ea000, f5410-f57b0
Returned 106496 bytes of ZoneHigh
e820 map has 7 items:
0: 0000000000000000 - 000000000009fc00 = 1 RAM
1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED
2: 00000000000f0000 - 0000000000100000 = 2 RESERVED
3: 0000000000100000 - 000000001ffda000 = 1 RAM
4: 000000001ffda000 - 0000000020000000 = 2 RESERVED
5: 00000000feffc000 - 00000000ff000000 = 2 RESERVED
6: 00000000fffc0000 - 0000000100000000 = 2 RESERVED
enter handle_19:
NULL
Booting from Hard Disk...
Booting from 0000:7c00
root@pve701 ~ # cat run109displayvga.sh
/usr/bin/kvm \
-id 109 \
-name apache \
-no-shutdown \
-chardev 'socket,id=qmp,path=/var/run/qemu-server/109.qmp,server=on,wait=off'
\
-mon 'chardev=qmp,mode=control' \
-chardev 'socket,id=qmp-event,path=/var/run/qmeventd.sock,reconnect=5' \
-mon 'chardev=qmp-event,mode=control' \
-smbios 'type=1,uuid=6edd8656-88c9-4e25-8e0b-0584369c71c8' \
-smp '2,sockets=2,cores=1,maxcpus=2' \
-nodefaults \
-boot
'menu=on,strict=on,reboot-timeout=1000,splash=/usr/share/qemu-server/bootsplash.jpg'
\
-vnc 'unix:/var/run/qemu-server/109.vnc,password=on' \
-cpu kvm64,enforce,+kvm_pv_eoi,+kvm_pv_unhalt,+lahf_lm,+sep \
-m 512 \
-device 'pci-bridge,id=pci.1,chassis_nr=1,bus=pci.0,addr=0x1e' \
-device 'pci-bridge,id=pci.2,chassis_nr=2,bus=pci.0,addr=0x1f' \
-device 'vmgenid,guid=feff7ec7-7e45-474c-843a-628a6eba91db' \
-device 'piix3-usb-uhci,id=uhci,bus=pci.0,addr=0x1.0x2' \
-device 'usb-tablet,id=tablet,bus=uhci.0,port=1' \
-chardev
'socket,id=serial0,path=/var/run/qemu-server/109.serial0,server=on,wait=off' \
-device 'isa-serial,chardev=serial0' \
-device 'VGA,id=vga,bus=pci.0,addr=0x2' \
-device 'virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3' \
-iscsi 'initiator-name=iqn.1993-08.org.debian:01:7d9a912f961' \
-drive 'if=none,id=drive-ide2,media=cdrom,aio=io_uring' \
-device 'ide-cd,bus=ide.1,unit=0,drive=drive-ide2,id=ide2,bootindex=200' \
-device 'virtio-scsi-pci,id=scsihw0,bus=pci.0,addr=0x5' \
-drive
'file=/dev/rbd/rbdkvm/vm-109-disk-1,if=none,id=drive-scsi0,format=raw,cache=none,aio=io_uring,detect-zeroes=on'
\
-device
'scsi-hd,bus=scsihw0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0,id=scsi0,bootindex=100'
\
-netdev
'type=tap,id=net0,ifname=tap109i0,script=/var/lib/qemu-server/pve-bridge,downscript=/var/lib/qemu-server/pve-bridgedown,vhost=on'
\
-device
'virtio-net-pci,mac=5E:D0:2C:1D:C8:4E,netdev=net0,bus=pci.0,addr=0x12,id=net0,bootindex=300'
\
-machine 'type=pc+pve0' \
-chardev 'stdio,id=seabios' \
-device 'isa-debugcon,iobase=0x402,chardev=seabios'
root@pve701 ~ # sh run109displayvga.sh
SeaBIOS (version rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org)
BUILD: gcc: (GCC) 4.8.5 20150623 (Red Hat 4.8.5-39) binutils: version
2.27-43.base.el7_8.1
No Xen hypervisor found.
Running on QEMU (i440fx)
Running on KVM
Found QEMU fw_cfg
QEMU fw_cfg DMA interface supported
qemu/e820: addr 0x0000000000000000 len 0x0000000020000000 [RAM]
Relocating init from 0x000d4bf0 to 0x1ffa9460 (size 92944)
Moving pm_base to 0x600
boot order:
1: /pci@i0cf8/scsi@5/channel@0/disk@0,0
2: /pci@i0cf8/ide@1,1/drive@1/disk@0
3: /pci@i0cf8/ethernet@12/ethernet-phy@0
4: HALT
kvmclock: at 0xeae20 (msr 0x4b564d01)
=== PCI bus & bridge init ===
PCI: pci_bios_init_bus_rec bus = 0x0
PCI: pci_bios_init_bus_rec bdf = 0xf0
PCI: primary bus = 0x0
PCI: secondary bus = 0xff -> 0x1
PCI: pci_bios_init_bus_rec bus = 0x1
PCI: QEMU resource reserve cap not found
PCI: subordinate bus = 0x0 -> 0x1
PCI: pci_bios_init_bus_rec bdf = 0xf8
PCI: primary bus = 0x0
PCI: secondary bus = 0xff -> 0x2
PCI: pci_bios_init_bus_rec bus = 0x2
PCI: QEMU resource reserve cap not found
PCI: subordinate bus = 0x0 -> 0x2
=== PCI device probing ===
Found 11 PCI devices (max PCI bus is 02)
=== PCI new allocation pass #1 ===
PCI: check devices
PCI: QEMU resource reserve cap not found
PCI: secondary bus 2 size 00001000 type io
PCI: secondary bus 2 size 00200000 type mem
PCI: secondary bus 2 size 00200000 type prefmem
PCI: QEMU resource reserve cap not found
PCI: secondary bus 1 size 00001000 type io
PCI: secondary bus 1 size 00200000 type mem
PCI: secondary bus 1 size 00200000 type prefmem
=== PCI new allocation pass #2 ===
PCI: IO: c000 - e0cf
PCI: 32: 0000000080000000 - 00000000fec00000
PCI: map device bdf=00:03.0 bar 0, addr 0000e000, size 00000040 [io]
PCI: map device bdf=00:05.0 bar 0, addr 0000e040, size 00000040 [io]
PCI: map device bdf=00:01.2 bar 4, addr 0000e080, size 00000020 [io]
PCI: map device bdf=00:12.0 bar 0, addr 0000e0a0, size 00000020 [io]
PCI: map device bdf=00:01.1 bar 4, addr 0000e0c0, size 00000010 [io]
PCI: map device bdf=00:12.0 bar 6, addr fea00000, size 00040000 [mem]
PCI: map device bdf=00:02.0 bar 6, addr fea40000, size 00010000 [mem]
PCI: map device bdf=00:02.0 bar 2, addr fea50000, size 00001000 [mem]
PCI: map device bdf=00:05.0 bar 1, addr fea51000, size 00001000 [mem]
PCI: map device bdf=00:12.0 bar 1, addr fea52000, size 00001000 [mem]
PCI: map device bdf=00:1e.0 bar 0, addr fea53000, size 00001000 [mem]
PCI: map device bdf=00:1f.0 bar 0, addr fea54000, size 00001000 [mem]
PCI: map device bdf=00:02.0 bar 0, addr fd000000, size 01000000 [prefmem]
PCI: map device bdf=00:03.0 bar 4, addr fe400000, size 00004000 [prefmem]
PCI: map device bdf=00:05.0 bar 4, addr fe404000, size 00004000 [prefmem]
PCI: map device bdf=00:12.0 bar 4, addr fe408000, size 00004000 [prefmem]
PCI: init bdf=00:00.0 id=8086:1237
PCI: init bdf=00:01.0 id=8086:7000
PIIX3/PIIX4 init: elcr=00 0c
PCI: init bdf=00:01.1 id=8086:7010
PCI: init bdf=00:01.2 id=8086:7020
PCI: init bdf=00:01.3 id=8086:7113
Using pmtimer, ioport 0x608
PCI: init bdf=00:02.0 id=1234:1111
PCI: init bdf=00:03.0 id=1af4:1002
PCI: init bdf=00:05.0 id=1af4:1004
PCI: init bdf=00:12.0 id=1af4:1000
PCI: init bdf=00:1e.0 id=1b36:0001
PCI: init bdf=00:1f.0 id=1b36:0001
PCI: Using 00:02.0 for primary VGA
handle_smp: apic_id=0x1
Found 2 cpu(s) max supported 2 cpu(s)
Copying PIR from 0x1ffbfc8c to 0x000f5b90
Copying MPTABLE from 0x00006d30/1ff9fed0 to 0x000f5a70
Copying SMBIOS entry point from 0x00006d30 to 0x000f5870
table(50434146)=0x1ffe1c81 (via rsdt)
ACPI: parse DSDT at 0x1ffdf040 (len 11329)
Scan for VGA option rom
Running option rom at c000:0003
Start SeaVGABIOS (version rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org)
VGABUILD: gcc: (GCC) 4.8.5 20150623 (Red Hat 4.8.5-39) binutils: version
2.27-43.base.el7_8.1
enter vga_post:
a=00000010 b=0000ffff c=00000000 d=0000ffff ds=0000 es=f000 ss=0000
si=00000000 di=00005f60 bp=00000000 sp=00006ca6 cs=f000 ip=d07a f=0000
VBE DISPI: bdf 00:02.0, bar 0
VBE DISPI: lfb_addr=fd000000, size 16 MB
Attempting to allocate 512 bytes lowmem via pmm call to f000:d137
pmm call arg1=0
VGA stack allocated at eac20
Turning on vga text mode console
set VGA mode 3
SeaBIOS (version rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org)
Machine UUID 6edd8656-88c9-4e25-8e0b-0584369c71c8
UHCI init on dev 00:01.2 (io=e080)
ATA controller 1 at 1f0/3f4/0 (irq 14 dev 9)
ATA controller 2 at 170/374/0 (irq 15 dev 9)
Searching bootorder for: HALT
Searching bootorder for: /pci@i0cf8/*@5
found virtio-scsi at 00:05.0
pci dev 00:05.0 virtio cap at 0x84 type 5 [pci cfg access]
pci dev 00:05.0 virtio cap at 0x70 type 2 bar 4 at 0xfe404000 off +0x3000 [mmio]
pci dev 00:05.0 virtio cap at 0x60 type 4 bar 4 at 0xfe404000 off +0x2000 [mmio]
pci dev 00:05.0 virtio cap at 0x50 type 3 bar 4 at 0xfe404000 off +0x1000 [mmio]
pci dev 00:05.0 virtio cap at 0x40 type 1 bar 4 at 0xfe404000 off +0x0000 [mmio]
pci dev 00:05.0 using modern (1.0) virtio mode
Searching bootorder for: /pci@i0cf8/*@5/*@0/*@0,0
Searching bios-geometry for: /pci@i0cf8/*@5/*@0/*@0,0
virtio-scsi vendor='QEMU' product='QEMU HARDDISK' rev='2.5+' type=0 removable=0
virtio-scsi blksize=512 sectors=8388608
DVD/CD [ata1-0: QEMU DVD-ROM ATAPI-4 DVD/CD]
Searching bootorder for: /pci@i0cf8/*@1,1/drive@1/disk@0
Searching bios-geometry for: /pci@i0cf8/*@1,1/drive@1/disk@0
Device reports MEDIUM NOT PRESENT
Found 0 lpt ports
Found 1 serial ports
PS2 keyboard initialized
All threads complete.
Scan for option roms
Running option rom at ca00:0003
pmm call arg1=1
pmm call arg1=0
pmm call arg1=1
pmm call arg1=0
Searching bootorder for: /pci@i0cf8/*@12
Searching bootorder for: /rom@genroms/kvmvapic.bin
Press ESC for boot menu.
VBE mode info request: 100
VBE mode info request: 101
VBE mode info request: 102
VBE mode info request: 103
VBE mode info request: 104
VBE mode info request: 105
VBE mode info request: 106
VBE mode info request: 107
VBE mode info request: 10d
VBE mode info request: 10e
VBE mode info request: 10f
VBE mode info request: 110
VBE mode info request: 111
VBE mode set: 4111
set VGA mode 111
Turning on vga text mode console
set VGA mode 3
SeaBIOS (version rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org)
Machine UUID 6edd8656-88c9-4e25-8e0b-0584369c71c8
Searching bootorder for: HALT
drive 0x000eabd0: PCHS=0/0/0 translation=lba LCHS=522/255/63 s=8388608
Running option rom at cb00:0003
Space available for UMB: cd800-ea000, f5410-f57b0
Returned 106496 bytes of ZoneHigh
e820 map has 7 items:
0: 0000000000000000 - 000000000009fc00 = 1 RAM
1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED
2: 00000000000f0000 - 0000000000100000 = 2 RESERVED
3: 0000000000100000 - 000000001ffda000 = 1 RAM
4: 000000001ffda000 - 0000000020000000 = 2 RESERVED
5: 00000000feffc000 - 00000000ff000000 = 2 RESERVED
6: 00000000fffc0000 - 0000000100000000 = 2 RESERVED
enter handle_19:
NULL
Booting from Hard Disk...
Booting from 0000:7c00
kvm: terminating on signal 2
_______________________________________________
SeaBIOS mailing list -- seabios@seabios.org
To unsubscribe send an email to seabios-le...@seabios.org
