On Fri, Jun 27, 2025 at 11:03:06PM +0000, Kevin O'Connor wrote: > On Fri, Jun 27, 2025 at 07:34:40PM +0000, Andrei Purdea wrote: > > Hello, > > > > This fixes what happens when F11/F12 is sent via serial port. > > The existing code already correctly detected the byte sequence that was sent > > on the serial connection, however it translated it to incorrect keycode. > > The termseq table must map to "DOS scan codes". > > The incorrect value matched "PS2 set1 scan codes" for F11 and F12, so I > > think > > this was simply an implementation mistake. > > > > I have tested the attached patch on real hardware. > > > > I am not the author of the patch, the original change can be found here: > > https://github.com/Dasharo/SeaBIOS/commit/0f4530859f11b3235b7d6163388f19577bdc6e1e > > Thanks. Looks correct to me (in that sercom.c:termseq would then > match kbd.c:scan_to_keycode). > > Gerd, do you have any thoughts on this change?
Looks good to me. take care, Gerd _______________________________________________ SeaBIOS mailing list -- seabios@seabios.org To unsubscribe send an email to seabios-le...@seabios.org
