RE: [AMRadio] Diversion
I had a G-50 a couple years ago with the same problem. The internal reduction drive assembly was slipping in some places. I squirted some degreaser inside the bigger shaft, and it worked much better. It started slipping again when it dried, but after squirting a little more in there, the slipping was gone. It might not work all the time, but it did work for me. Al, WA2AS -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Rick Brashear Sent: Monday, August 28, 2006 5:23 PM To: AMRadio@mailman.qth.net Subject: [AMRadio] Diversion I took time-out from the R-3** and BTA-1R2 and BC-610 and so on to get the G-50 I bought a while back in operation. After stuffing the filter capacitors and replacing a couple of capacitors in the cathode circuit of the speech amp/preamp combo the G-50 came to life. However, I find now that the variable capacitor on the receive VFO is having turning problems. It's one of those geared internally capacitors with one shaft inside another one. I guess the friction clutch or whatever makes those things tick is worn out or maybe oily. Does anyone have a solution for such a problem, other than replacing it? Thanks, Rick/K5IZ The information contained in this message is confidential and intended only for use of the designated recipient(s) named above. If the reader of this message is not the intended recipient or an agent responsible for delivering it to the intended recipient, you are hereby notified that you have received this message in error, and that any review, dissemination, distribution, copying, or alteration of this message is strictly prohibited. If you have received this communication in error, please notify the originator immediately and remove it from your system. __ AMRadio mailing list Home: http://mailman.qth.net/mailman/listinfo/amradio Help: http://mailman.qth.net/mmfaq.html Post: mailto:AMRadio@mailman.qth.net AMfone Website: http://www.amfone.net AM List Admin: Brian Sherrod/w5ami, Paul Courson/wa3vjb
RE: [AMRadio] antenna tuners
I was thinking of putting an add-on kit on my vertical to make it resonant on six meters, but now I'm thinking that might be a waste of time and money if I can tune the antenna on that band with my tuner and get a low swr at the transceiver. It's a tube rig, so it probably doesn't need a real low swr anyway. Any thoughts or recommendations? Thanks, Al, WA2AS -Original Message- From: Gary Schafer [mailto:[EMAIL PROTECTED] Sent: Thursday, April 20, 2006 11:08 AM To: 'Discussion of AM Radio' Subject:RE: [AMRadio] antenna tuners Hi Alan, No need to go away! You will get lots of good info here and asking / discussing is how to understand. As to resonant antennas, it makes no difference in how well they radiate. Resonance of the antenna is not required. SWR is not all that bad either as long as the transmitter sees a match, especially the solid state rigs. When open wire feed line is used there is usually very high SWR on the feed line. If you connect 450 ohm line to a half wave dipole which is normally in the 50 to 70 ohm range you have high swr on the feed line. And no, high swr on a feed line will not cause it to radiate. What causes feed line radiation is an unbalance between the two wires in the feed line. High SWR on coax line will cause a little more loss in the feed line due to the higher currents involved across the lower impedance of the coax. That is why when using open wire line that is 400 to 600 ohms, there is much less loss. The same power across a higher impedance means less current and less current going through the feed line wire means less power loss. An antenna tuner just matches the impedance seen at the transmitter end of the feed line to the 50 ohm transmitter output. If there is high swr on the feed line, any power reflected from the antenna is not wasted it is just re-reflected back to the antenna and eventually gets radiated. At HF even fairly high swr on coax lines does not cause excessive loss. 73 Gary K4FMX -Original Message- From: [EMAIL PROTECTED] [mailto:amradio- [EMAIL PROTECTED] On Behalf Of Alan Beck Sent: Thursday, April 20, 2006 5:45 AM To: AMRadio@mailman.qth.net Subject: [AMRadio] antenna tuners I don't believe in them. If you can't resonate your antenna, then what are you doing? If you use a tuner, you are creating a voltage divider effect that creates a reactive load in your shack, to ground that makes your antenna feed line + radiating elements. Over the years, the importance of having at least a 2:1 match with at least 1.5:1 some where in the the antenna design. Proper antenna design for your favorite frequencies is the best choice. I currently use a multi-element dipole to cover 80,40,20,15 and 10 meters. I just use a VSWR bridge and back off the power when the SWR rises close to 2:1. I am not saying my answer is the best, I am only stating my opinion. Just like microphones in the sound work I help out with at church. If they are not singing into the mic, I cannot fix it without creating a gain structure that is sucking up to feed back You need to fix your problems at the source. I our cases, it is resonance of your antenna, by some means. Even my hamstick on my jeep does great due to attention to resonance. 73 Alan VY2WU __ AMRadio mailing list Home: http://mailman.qth.net/mailman/listinfo/amradio Help: http://mailman.qth.net/mmfaq.html Post: mailto:AMRadio@mailman.qth.net AMfone Website: http://www.amfone.net AM List Admin: Brian Sherrod/w5ami, Paul Courson/wa3vjb __ AMRadio mailing list Home: http://mailman.qth.net/mailman/listinfo/amradio Help: http://mailman.qth.net/mmfaq.html Post: mailto:AMRadio@mailman.qth.net AMfone Website: http://www.amfone.net AM List Admin: Brian Sherrod/w5ami, Paul Courson/wa3vjb The information contained in this message is confidential and intended only for use of the designated recipient(s) named above. If the reader of this message is not the intended recipient or an agent responsible for delivering it to the intended recipient, you are hereby notified that you have received this message in error, and that any review, dissemination, distribution, copying, or alteration of this message is strictly prohibited. If you have received this communication in error, please notify the originator immediately and remove it from your system.
RE: [AMRadio] Gonset G-50
I have the .djvu file of the manual with the schematic, alignment procedure, theory of operation, and all that stuff, if you're still interested. Al, WA2AS -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Saturday, September 03, 2005 6:19 AM To: amradio@mailman.qth.net Subject:[AMRadio] Gonset G-50 I need the Schematic and service manual for the Gonset G-50 Six Meter AM rig...Tnx es 73's Ron W6MAU __ AMRadio mailing list Home: http://mailman.qth.net/mailman/listinfo/amradio Help: http://mailman.qth.net/mmfaq.html Post: mailto:AMRadio@mailman.qth.net The information contained in this message is confidential and intended only for use of the designated recipient(s) named above. If the reader of this message is not the intended recipient or an agent responsible for delivering it to the intended recipient, you are hereby notified that you have received this message in error, and that any review, dissemination, distribution, copying, or alteration of this message is strictly prohibited. If you have received this communication in error, please notify the originator immediately and remove it from your system.
RE: [AMRadio] Bad Static Problem
Sounds like a good idea if my static comes back. It was there for several days, then went away. I'm sure it will come back again sometime. (Hoping it won't though). -Original Message- From: Donald Chester [mailto:[EMAIL PROTECTED] Sent: Thursday, February 10, 2005 6:10 PM To: amradio@mailman.qth.net Subject: RE: [AMRadio] Bad Static Problem I was going up and down streets power pole to power pole on my bicycle with a AM Walkman radio tuned to 540 and 1700 Khz. I use a Radio Shack aircraft receiver. About the size of a HT, and makes a nice line noise sniffer. The bicycly is a good idea also, since every vehicle we have here, new and old, swamps out the entire spectrum with ignition noise. I have gone noise sniffing in the car, picking up momentum and then cutting off the engine and pushing in the clutch and coasted until the car nearly stopped, then turned back on the ignition and popped t he clutch to restart the engine to regain momentum and start the process all over again. Other drivers on the road seemed to assume I was having car trouble and would ask if I needed help. k4kyv __ AMRadio mailing list Home: http://mailman.qth.net/mailman/listinfo/amradio Help: http://mailman.qth.net/mmfaq.html Post: mailto:AMRadio@mailman.qth.net
RE: [AMRadio] Classic Exchange
I'm planning on getting in on that if I remember. I was playing with the monitor scope a little yesterday. I took the CRT out, and connected it to your monitorscope. At first I didn't see anything on it, but after fiddling with the knobs, I got a trace. It didn't seem as bright as yours, but maybe that's because it was sitting out in the open. At least I know the CRT works. I also have 300 volts and 600 volts where I'm supposed to, so at least that part of the power supply is good. I'll have to do some more investigating when I have time. -Original Message- From: Schichler, Don [mailto:[EMAIL PROTECTED] Sent: Wednesday, February 09, 2005 8:31 AM To: AMRadio@mailman.qth.net Subject: [AMRadio] Classic Exchange Thought I would post it here in case anybody missed it. Sounds like fun. 73, Don K2FY -Original Message- From: Boat Anchor Owners and Collectors List [mailto:[EMAIL PROTECTED] Behalf Of howard holden Sent: Monday, February 07, 2005 4:53 PM To: [EMAIL PROTECTED] Subject: [BOATANCHORS-TEMPE] Classic Exchange For those in the know see ya Sunday. For those who don't, read on, and then see ya Sunday! Howie WB2AWQ Classic Exchange CX The CX is a no-pressure contest celebrating the older commercial and homebrew equipment that was the pride and joy of ham shacks many decades ago. The object is to encourage restoration, operation and enjoyment of this older Classic equipment. However, you need not operate a Classic rig to participate in the CX. YOU MAY USE ANY RIG in the contest although new gear is a distinct scoring disadvantage. You can still work the great ones with modern equipment. WHEN - WHERE - WHAT The CX will run from 1400 UTC February 13 to 0800 UTC February 14, 2005. (9 AM Eastern Time on Sunday to 3 AM Eastern Time Monday) CW: Send CQ CX Phone: Call CQ Classic Exchange SUGGESTED FREQUENCIES: CW: 1.810 3.545 7.045 14.045 21.135 28.180 Mc. AM: 1.890 3.880 7.290 14.286 21.420 29.000 Mc. SSB: 3.870 7.280 14.270 21.370 28.490 Mc. Exchange your name, RST, QTH (state US, province for Canada, country for DX), receiver and transmitter manufacturer/model (homebrew send final amp tube or transistor type) and other interesting conversation. The same station may be worked with different equipment combinations on each band and in each mode. Non-participating stations may be worked for credit. SCORING Multiply total number of QSO's (all bands and all modes) by the sum of the different types of receivers and transmitters you worked (transceivers count both as a transmitter and a receiver) plus the number states/provinces/countries worked on each band and each mode. Multiply that product by your CX multiplier, which is the total of years old of all receivers and transmitters used. Each receiver or transmitter must be used in a minimum of three QSO's to be counted in the multiplier. If the equipment is homebrew, count it as a minimum of 25 years old unless actual construction date or date of its construction article (in the case of a 'reproduction) is older. Total QSO's all bands times RCVRs + XMTRs+ states/provinces/countries (total each band and mode separately; add totals together) times CX Multiplier: (total years age of all transmitters and receivers used) SCORE= QSO's x (RX +TX+QTH's) x CX Multiplier Certificates and appropriate memorabilia are awarded every now and then for the highest score, the longest DX, exotic equipment, best excuses and other unusual achievements. Send logs, comments, anecdotes, pictures, etc. to J.D. Mac Mac Aulay, WQ8U at [EMAIL PROTECTED] Or by mail to: WQ8U 6235 Wooden Shoe Lane Centerville, OH 45459 The CX Newsletter and announcement of next CX will be posted on the CX web site: http://qsl.asti.com/CX Questions about CX, its origin, history, and idiosyncrasies, as well as accolades for being such a great event, should be sent to: Al Stephens, N5AIT or Jim Hanlon, W8KGI or Marty Reynolds, AA4RM --- This list is a public service of the City of Tempe, Arizona --- Subscription control - http://www.tempe.gov/lists/control.asp?list=BOATANCHORS To post - [EMAIL PROTECTED] Archives - http://listserv.tempe.gov/archives/BOATANCHORS.html __ AMRadio mailing list Home: http://mailman.qth.net/mailman/listinfo/amradio Help: http://mailman.qth.net/mmfaq.html Post: mailto:AMRadio@mailman.qth.net
RE: [AMRadio] Bad Static Problem
Update on static problem: Yesterday, I tried both a 6 foot wire and my Ringo Ranger 2-meter antenna (just the center pin of the PL-259), and the static is still there, but not as strong as with the hf vertical. I thought at first that I tracked it down, because I found that the dimmer switches for the recessed lighting in the kitchen were making all kind of noise at the very low frequencies (peaked up at 170 kHz). After shutting the lights off, I found that that noise went away, but the noise on all the lower hf ham bands was still there just as strong. It doesn't have any sharp peaks or anything, but there are a lot of places where it does kind of peak up, although it is very broad. The freqs where it seems to peak are (in MHz): 2.4, 2.7, 3.37, 3.55, 3.9, 4.2, 5.0, 6.2, 6.6, 7.2, 8.0, and 8.7. Above that, it starts to roll off quite a bit. The peaks might have something to do with the resonance of the antenna, but I'm not sure. I was using the hf vertical when I measured them. Any more thoughts? I'm thinking probably power lines, but maybe I should try a battery-operated radio and turn off the power to the whole house before I come to that conclusion. -Original Message- From: Bob Macklin [mailto:[EMAIL PROTECTED] Sent: Tuesday, February 01, 2005 1:53 PM To: [EMAIL PROTECTED]; Discussion of AM Radio Subject: Re: [AMRadio] Bad Static Problem Last night I had HIGH static on both my HF receivers. And I have been having a problem with static discharge. But it has not been snowing in Seattle. They wish it was. Bob Macklin K5MYJ/7 Seattle, Wa. REAL RADIOS GLOW IN THE DARK - Original Message - From: Vince Wesa Werber [EMAIL PROTECTED] To: Discussion of AM Radio amradio@mailman.qth.net Sent: Tuesday, February 01, 2005 10:22 AM Subject: Re: [AMRadio] Bad Static Problem Was is snowing when you heard this??? The dry air of winter can cause static discharge in your antenna/receiver... Just a thought 73 vince ka1iic On Tuesday 01 February 2005 08:48 am, Schichler, Alfred wrote: I just started getting an intermittent noise problem on several bands that runs from s-9 to about 20 over. It's especially bad on 40 meters, but I can hear it on 80 and 160 pretty good too. Not too bad on the higher bands. Sometimes it is just one or two pops per second, then it changes to as much as about 50 or more pops per second, then slowly back again. Sometimes only one every few seconds. This is very annoying, because the main receiver I use does not have a noise blanker, and the noise limiter doesn't do a whole lot. I was wondering if that sounds like anything similar to the noise any of you other guys have been getting. (Maybe from power lines?) I can't hear it at all on a portable AM broadcast band receiver, so it might be difficult to track down without getting the power company involved. Thanks for any help. Al, NE2D __ AMRadio mailing list Home: http://mailman.qth.net/mailman/listinfo/amradio Help: http://mailman.qth.net/mmfaq.html Post: mailto:AMRadio@mailman.qth.net __ AMRadio mailing list Home: http://mailman.qth.net/mailman/listinfo/amradio Help: http://mailman.qth.net/mmfaq.html Post: mailto:AMRadio@mailman.qth.net __ AMRadio mailing list Home: http://mailman.qth.net/mailman/listinfo/amradio Help: http://mailman.qth.net/mmfaq.html Post: mailto:AMRadio@mailman.qth.net
[AMRadio] Bad Static Problem
I just started getting an intermittent noise problem on several bands that runs from s-9 to about 20 over. It's especially bad on 40 meters, but I can hear it on 80 and 160 pretty good too. Not too bad on the higher bands. Sometimes it is just one or two pops per second, then it changes to as much as about 50 or more pops per second, then slowly back again. Sometimes only one every few seconds. This is very annoying, because the main receiver I use does not have a noise blanker, and the noise limiter doesn't do a whole lot. I was wondering if that sounds like anything similar to the noise any of you other guys have been getting. (Maybe from power lines?) I can't hear it at all on a portable AM broadcast band receiver, so it might be difficult to track down without getting the power company involved. Thanks for any help. Al, NE2D
RE: [AMRadio] Bad Static Problem
No, it wasn't snowing, but it was cold. Are you saying it might be because it wasn't snowing, and the air was very dry? Or that the snow might be causing it? I have a vertical antenna (Butternut) with an MFJ lightning arrestor in line, so I think that is supposed to discharge static that builds up. -Original Message- From: Vince Wesa Werber [mailto:[EMAIL PROTECTED] Sent: Tuesday, February 01, 2005 1:23 PM To: Discussion of AM Radio Subject: Re: [AMRadio] Bad Static Problem Was is snowing when you heard this??? The dry air of winter can cause static discharge in your antenna/receiver... Just a thought 73 vince ka1iic On Tuesday 01 February 2005 08:48 am, Schichler, Alfred wrote: I just started getting an intermittent noise problem on several bands that runs from s-9 to about 20 over. It's especially bad on 40 meters, but I can hear it on 80 and 160 pretty good too. Not too bad on the higher bands. Sometimes it is just one or two pops per second, then it changes to as much as about 50 or more pops per second, then slowly back again. Sometimes only one every few seconds. This is very annoying, because the main receiver I use does not have a noise blanker, and the noise limiter doesn't do a whole lot. I was wondering if that sounds like anything similar to the noise any of you other guys have been getting. (Maybe from power lines?) I can't hear it at all on a portable AM broadcast band receiver, so it might be difficult to track down without getting the power company involved. Thanks for any help. Al, NE2D __ AMRadio mailing list Home: http://mailman.qth.net/mailman/listinfo/amradio Help: http://mailman.qth.net/mmfaq.html Post: mailto:AMRadio@mailman.qth.net __ AMRadio mailing list Home: http://mailman.qth.net/mailman/listinfo/amradio Help: http://mailman.qth.net/mmfaq.html Post: mailto:AMRadio@mailman.qth.net
RE: [AMRadio] Bad Static Problem
It doesn't seem especially concentrated, but it definitely is stronger on some parts of the bands than on others. I'll have to try to analyze it more thoroughly. Maybe I'll have to buy a cheap SW portable sometime just for tracking down noise. I heard similar noise about a week and a half ago, but I figured it was probably from some of the people using snowblowers on our street after a big snow storm we had. -Original Message- From: Jim Candela [mailto:[EMAIL PROTECTED] Sent: Tuesday, February 01, 2005 12:44 PM To: Discussion of AM Radio Subject: Re: [AMRadio] Bad Static Problem Al, Is this noise broadband, or is it concentrated in frequency, and then showing another concentration at say 200 Khz away? My VCR when off was this last way, and the pulse rate would vary just like you said. One of those clusters was centered at 3885 (abt 15 kc wide), and this would vary maybe +/- 20 Khz depending on temperature. I tracked it down pretty quickly with a cheap Chinese SW portable I picked up in Shanghai a few years back. It's amazing how much stuff we have sucking power in our houses 24/7 just so that we can turn something on with a remote. Count all the wall-worts, and other gizmo's, and I bet it adds up to over 100 watts all the time. Some of this junk is now using switching power supplies with little or NO filtering. Sigh. Good luck with finding the culprit! Regards, Jim WD5JKO --- Schichler, Alfred [EMAIL PROTECTED] wrote: I just started getting an intermittent noise problem on several bands that runs from s-9 to about 20 over. It's especially bad on 40 meters, but I can hear it on 80 and 160 pretty good too. Not too bad on the higher bands. Sometimes it is just one or two pops per second, then it changes to as much as about 50 or more pops per second, then slowly back again. Sometimes only one every few seconds. This is very annoying, because the main receiver I use does not have a noise blanker, and the noise limiter doesn't do a whole lot. I was wondering if that sounds like anything similar to the noise any of you other guys have been getting. (Maybe from power lines?) I can't hear it at all on a portable AM broadcast band receiver, so it might be difficult to track down without getting the power company involved. Thanks for any help. Al, NE2D __ AMRadio mailing list Home: http://mailman.qth.net/mailman/listinfo/amradio Help: http://mailman.qth.net/mmfaq.html Post: mailto:AMRadio@mailman.qth.net __ AMRadio mailing list Home: http://mailman.qth.net/mailman/listinfo/amradio Help: http://mailman.qth.net/mmfaq.html Post: mailto:AMRadio@mailman.qth.net
RE: [AMRadio] Bad Static Problem
It could be static discharge, I guess. Unfortunately, I only have one hf antenna, so I can't try a different one to compare. I do have a 2-meter vertical, so could try that on hf just to see if there is any audible static with that. -Original Message- From: Bob Macklin [mailto:[EMAIL PROTECTED] Sent: Tuesday, February 01, 2005 1:53 PM To: [EMAIL PROTECTED]; Discussion of AM Radio Subject: Re: [AMRadio] Bad Static Problem Last night I had HIGH static on both my HF receivers. And I have been having a problem with static discharge. But it has not been snowing in Seattle. They wish it was. Bob Macklin K5MYJ/7 Seattle, Wa. REAL RADIOS GLOW IN THE DARK - Original Message - From: Vince Wesa Werber [EMAIL PROTECTED] To: Discussion of AM Radio amradio@mailman.qth.net Sent: Tuesday, February 01, 2005 10:22 AM Subject: Re: [AMRadio] Bad Static Problem Was is snowing when you heard this??? The dry air of winter can cause static discharge in your antenna/receiver... Just a thought 73 vince ka1iic On Tuesday 01 February 2005 08:48 am, Schichler, Alfred wrote: I just started getting an intermittent noise problem on several bands that runs from s-9 to about 20 over. It's especially bad on 40 meters, but I can hear it on 80 and 160 pretty good too. Not too bad on the higher bands. Sometimes it is just one or two pops per second, then it changes to as much as about 50 or more pops per second, then slowly back again. Sometimes only one every few seconds. This is very annoying, because the main receiver I use does not have a noise blanker, and the noise limiter doesn't do a whole lot. I was wondering if that sounds like anything similar to the noise any of you other guys have been getting. (Maybe from power lines?) I can't hear it at all on a portable AM broadcast band receiver, so it might be difficult to track down without getting the power company involved. Thanks for any help. Al, NE2D __ AMRadio mailing list Home: http://mailman.qth.net/mailman/listinfo/amradio Help: http://mailman.qth.net/mmfaq.html Post: mailto:AMRadio@mailman.qth.net __ AMRadio mailing list Home: http://mailman.qth.net/mailman/listinfo/amradio Help: http://mailman.qth.net/mmfaq.html Post: mailto:AMRadio@mailman.qth.net __ AMRadio mailing list Home: http://mailman.qth.net/mailman/listinfo/amradio Help: http://mailman.qth.net/mmfaq.html Post: mailto:AMRadio@mailman.qth.net
RE: [AMRadio] Bad Static Problem
Thanks for all the info. I guess the next step is to try an indoor antenna made out of a piece of wire, and see what happens. I don't have a portable short wave receiver, but I do have a Kenwood R-2000, which I think, works on 12 volts, so I might be able to try it in my truck with a piece of wire for an antenna. I sure hope it doesn't turn out to be an uncooperative neighbor. Al NE2D -Original Message- From: Jim Wilhite [mailto:[EMAIL PROTECTED] Sent: Tuesday, February 01, 2005 3:35 PM To: Discussion of AM Radio Subject: Re: [AMRadio] Bad Static Problem Generally speaking when you near noise in greater strength at low frequencies, it is VERY close to you or far away. Noise of the specific variety propogates according to the length of the wave. IF it is power line generated and you hear it on 160 and 80 strong and weaker on the higher bands, then it will be far away and carried by the line. The closer you get to the source the higher frequencies will get strong as well. Equipment for finding the specific location of power line noise will be tuneable from 30 to 300 MHz, AM. The closer you get the higher in frequency you should go until reaching 300 MHz and using a beam antenna you can pinpoint the pole where the noise is. Check around your house for sources of noise that has been suggested, TVs, VCRs, your stove (if it has a microprocessor) Satellite receiver (mine has broadband noise), doorbell transformer, your water heater, water softner, etc. If it is in your house you should be able to hear it on the higher frequencies but you say it is not strong there. Remove the antenna connection to your receiver and see if you hear it, if not attach a short piece of wire. Should you not hear it with the short wire, it will be located in your neighborhood or down the street up to a mile or more away. Then you should check your neighborhood with a hand held portable. If you own a portable or scanner that receives the aircraft band, then make up or purchase a 3 element VHF beam and use a short piece of RG 58 to attach it to the portable. Start at lower frequencies and as the noise gets louder, switch to the higher frequencies until you locate a couple of poles. At that point, copy the numbers on the poles and call your power company. Document the call and who you speak to in case they are not very responsive. Sometimes it takes a few days to a couple of weeks for them to fix a problem, be patient and give them adequate time. If, within about 6-8 weeks they have not contacted you, call again and document every call. If they do not respond in about 3 or so months, then send a complaint to the FCC with copies of your documentation. This is all true if the noise is coming from the power company. If it is a neighbor, then notify them verbally, be very nice, but do document. Recently the FCC sent a Notice of Apparent Liability to a man and woman who owned an electric wheel chair and the charging circuit was generating noise. The ham installed filters and the owner removed the filter. After several attempts to convince them to fix the problem and they would not, the ham sent the information to the FCC. The FCC made several attempts to convince the owner and when they would not address the problem the FCC sent the notice. This is probably more than you want to know, but it illustrates where some of these crazy noises can originate. 73 Jim W5JO - Original Message - From: Schichler, Alfred [EMAIL PROTECTED] To: AMRadio@mailman.qth.net Sent: Tuesday, February 01, 2005 7:48 AM Subject: [AMRadio] Bad Static Problem I just started getting an intermittent noise problem on several bands that runs from s-9 to about 20 over. It's especially bad on 40 meters, but I can hear it on 80 and 160 pretty good too. Not too bad on the higher bands. Sometimes it is just one or two pops per second, then it changes to as much as about 50 or more pops per second, then slowly back again. Sometimes only one every few seconds. This is very annoying, because the main receiver I use does not have a noise blanker, and the noise limiter doesn't do a whole lot. I was wondering if that sounds like anything similar to the noise any of you other guys have been getting. (Maybe from power lines?) I can't hear it at all on a portable AM broadcast band receiver, so it might be difficult to track down without getting the power company involved. Thanks for any help. Al, NE2D __ __ AMRadio mailing list Home: http://mailman.qth.net/mailman/listinfo/amradio Help: http://mailman.qth.net/mmfaq.html Post: mailto:AMRadio@mailman.qth.net
RE: [AMRadio] CRA Collins AM Net
I noticed that it says 8 PM EST (which would be 0100 GMT) in the top part of the message, but 8 PM EDST at the bottom (which would be GMT). Just to clarify things, I was wondering which is correct. Thanks, Al, NE2D -Original Message- From: David Knepper [mailto:[EMAIL PROTECTED] Sent: Tuesday, January 04, 2005 8:33 AM To: Collins Mail List; Discussion of AM Radio Subject: [AMRadio] CRA Collins AM Net Again, please join the CRA gang with your AM equipment tomorrow evening (Wednesday) on 3805 Khz at 8 PM EST on AM This is not your ususal in for the numbers kind of thing but an opportunity to try AM on the lower end of 75 meters where the band is less crowded. You need not be running Collins, certainly. Thank you Dave, W3ST Publisher of the Collins Journal Secretary to the Collins Radio Association www.collinsra.com Nets: 3805 Khz, Monday/Wednesdays 8 PM EDST 14250 Khz Saturday, 12 Noon EDST __ AMRadio mailing list Home: http://mailman.qth.net/mailman/listinfo/amradio Help: http://mailman.qth.net/mmfaq.html Post: mailto:AMRadio@mailman.qth.net
[AMRadio] Low Power AM nets
I was wondering if there are any nets, or just parts of the 75 or 40 meter bands where I could find anyone on low power AM, preferably controlled-carrier, screen-grid modulation. I recently got a DX-40 / HQ-100 AM Station on the air, for nostalgic purposes, but it seems like the only AM stations I usually hear are ones with high-power, high-quality plate modulated AM, and I don't want my puny signal to be just lost in the crowd or ridiculed. (Not that that would necessarily happen, but it seems like a possibility). I haven't listened at all hours of the day or anything, but I haven't found what I'm looking for. I would appreciate any info on this subject. Al, NE2D