Title: Message
Yes Hooker has one with 13/4”, If I recall correct, part no is 2116. Is sounds tempting
with stainless though
Hans
-Ursprungligt meddelande-
Från: Clint Hooper [mailto:chooper@sw.rr.com]
Skickat: Thursday, July 07, 2005
06:36
Till: The Chevelle Mailing List
Ämne: Re: [Chevelle-list]
stainless headers
Not sure 1 3/4" tubes are
available,Hans. 1 5/8" would work fine,though. Hooker might have what
you're looking for.
Clint Hooper
H&H Custom,owner
1969 El Camino ProTourer
2001 H-D FLHR custom bagger
http://dalesplace.com/misc/friends/clint/clint_hooper.htm
- Original Message -
From: Hans Edlund
Hi Clint
I am looking for a pair
of headers for a 71 Camino. SBC and I need 1 ¾” due to the charger. Until
now I didn’t thought stainless steel was an option. But if you know
some…
Hans
-Ursprungligt meddelande-
Från: Clint Hooper
[mailto:[EMAIL PROTECTED]r.com]
Skickat: Wednesday,
July 06, 2005 12:43
Till: The Chevelle Mailing List
Ämne: [Chevelle-list] stainless
headers
What year car do you need them
for,Andre? I'll talk to Al and see what I can do.
Clint Hooper
H&H Custom,owner
1969 El Camino ProTourer
2001 H-D FLHR custom bagger
http://dalesplace.com/misc/friends/clint/clint_hooper.htm
- Original Message -
From: André-Tigergutt
Hi
again,
I really
wanted something bigger but Scott there answered that they wouldnt offer
anything else than 1 5/8"
I
totally agree that 1 5/8" are right for a 350, but my later
plans include a much bigger sbc (434 or 454cid) so if they offered 1
7/8" I'd go for that right away to avoid buying another set a a later time
even if that would cost some tq right now.
Maybe Al
offered to build a set for you because you know him ??
Se below
for the Q's &A's:
1 Do
you have any small block Chevelle headers with bigger primary tubes than 1
5/8"? SORRY THE 1.625”
PRIMARIES ARE ALL WE HAVE TO OFFER.
2 Do
you offer any other style of flange style than the leakprone 3bolt style
(slip-on style with band clamp or something like Burns v-band)? SLIP-FIT STYLE IS AVAILABLE.
3 Do
you supply the cones with flanges that are to be welded to the
exhaust system toghether with the headers? NO
4 How
thick are the flanges that are to be mounted on the engine? 0.375” THICK
5 If
I were to upgrade the headers to 18deg heads at a later time could I just
change the engine flanges or would I need a complete new header? YOU WOULD HAVE TO MAKE THAT CALL, WE COULD SUPPLY YOU WITH THE
FLANGES WHEN THEN TIME COMES.
6 Do
the headers have equal lenght primary tubes? NO THEY ARE NOT EQUAL LENGTH, SEE ATTACHED PICTURE.
thanks!
Have Fun
André
-Original Message-
From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On
Behalf Of Clint Hooper
Sent: 6. juli 2005 20:55
To: The Chevelle Mailing List
Subject: Re: [Chevelle-list]
stainless headers
Stainless Works will build their
headers with 1 5/8", 1 3/4", or 1 7/8" primaries. 1 5/8"
tubes would be my preference for my 350.
Talk to Al Noe,the owner.
Clint Hooper
H&H Custom,owner
1969 El Camino ProTourer
2001 H-D FLHR custom bagger
http://dalesplace.com/misc/friends/clint/clint_hooper.htm
- Original Message -
From: André-Tigergutt
Hi
Clint,
looks
like they are fine, I asked some questians and even if they are only 1
5/8" they sound really nice.
they are
not that expensive either, around $600
Have Fun
André
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On
Behalf Of Clint Hooper
Sent: 6. juli 2005 20:36
To: The Chevelle Mailing List
Subject: Re: [Chevelle-list]
stainless headers
Hooker also builds some of their
headers now in stainless. If I ever switch to stainless headers,Stainless Works
will be the ones I use.
Clint Hooper
H&H Custom,owner
1969 El Camino ProTourer
2001 H-D FLHR custom bagger
http://dalesplace.com/misc/friends/clint/clint_hooper.htm
- Original Message -
From: André-Tigergutt
Hi all,
have
anyone tried headers from stainless works? I know Clint proposed them a while
back but I have no more than that.
any
other brand of stainless small block headers to consider??
thanks !
Have Fun
André