Mica Modem
I would like to use AS5300 as V.110 connect server. I have AS5300 with QUAD-E1 and Modem MICA. We have successfully create the isdn pri link and the modem can connect in and out into analog call type. The problem arise when I want the connection to be a ISDN V.110. With IOS C5300-is-mz.113-9.AA1.bin, the 'show ver' command would display '30 terminal lines' but with IOS 120-4.XI1 120-5.T2, the terminal lines are gone. On 'show logging' command I see the 'MICA-5-UNKNMODEM : Unknown Modem Module ...'. What did I miss ? -ivan- ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
AS5300 Mica modem probs ?
Problem is that users are taking 5+ attempts to log on, from Laptops using PCMCIA Gold cards. Client is dial-up networking and initial speed was set to 115200. I have subsequently found that lowering the client speed to 57600 on the com port improves the logon rate. However, this should only affect the speed from the Laptop to the modem. According to debug modem etc it was getting locked up at the "EC Negotiation phase" Has anyone dealt with this type of problem before ? 2 392241 mica-modem-pw.2.7.1.0.bin (from sh flash) Cannot find any info for the above revision of firmware for the modems. Thanx for your attention, Phil. Do You Yahoo!? Get your free @yahoo.co.uk address at http://mail.yahoo.co.uk or your free @yahoo.ie address at http://mail.yahoo.ie ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: AS5300 Mica modem probs ?
Yes, there is a command to lower your 5300 side for quicker connect rate. We had the same problem. The real issue is that the mica modems are less tolerant of line problems than the 5200's were. So lowering the connect rate solved our problem. We called TAC to get the correct modem string. If you're really into troubleshooting this problem look into the far end echo and you'll see the problem. -- Rich Russell www.thetestpage.net Free study tests Phil Barker <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > > Problem is that users are taking 5+ attempts to log > on, > from Laptops using PCMCIA Gold cards. > Client is dial-up networking and initial speed was set > to 115200. I have subsequently found that lowering the > client speed to 57600 on the com port improves the > logon rate. However, this should only affect the speed > from the Laptop to the modem. > > According to debug modem etc it was getting locked up > at the "EC Negotiation phase" > > Has anyone dealt with this type of problem before ? > > 2 392241 mica-modem-pw.2.7.1.0.bin (from sh > flash) > Cannot find any info for the above revision of > firmware > for the modems. > > Thanx for your attention, > > Phil. > > > > > Do You Yahoo!? > Get your free @yahoo.co.uk address at http://mail.yahoo.co.uk > or your free @yahoo.ie address at http://mail.yahoo.ie > > ___ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > --- ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
how to configure mica modem in 3640? [7:13096]
I have a ce1( use e1-r2 signal) and mica modem in 3640. when I use anolog modem dial to 3640, some types anolog modems can connect to 3640, some types will disconnect so fast. what's the matter? If I want to use reverse telnet to configure mica modem, it's hard to know when the next line of mica modem will response the dial in. so I want to shutdown some mica modem, but I cann't find out command. what should I do? Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=13096&t=13096 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
