frame-relay lmi question...
I'm reading a CIT book that is saying that not only does frame-relay encapsulation have to be the same on both sides (central site to remote site router) but the LMI does also... I thought the LMI type was only significant from that router to its telco frame-relay switch. Comments? thanks Cory R. Stull MCSE, Bay Router Specialist, CCNA,CCDA Communications Concepts Unlimited 262-814-7214 **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: frame-relay lmi question...
I am on your side Cory - the L in LMI stands for LOCAL, and the LMI type has to be the same between your router and the frame-relay switch it is connecting to. I found some more info about it here... http://www.ieng.com/warp/public/779/smbiz/service/troubleshooting/ts_fr.htm# Step%202 (watch for wordwrap) If someone has a different opinion, please copy me in on the reply. Hth, Ole Ole Drews Jensen Systems Network Manager CCNA, MCSE, MCP+I RWR Enterprises, Inc. [EMAIL PROTECTED] http://www.insync.net/~drews/ccnp -Original Message- From: Stull, Cory [mailto:[EMAIL PROTECTED]] Sent: Wednesday, September 20, 2000 11:23 AM To: '[EMAIL PROTECTED]' Subject: frame-relay lmi question... I'm reading a CIT book that is saying that not only does frame-relay encapsulation have to be the same on both sides (central site to remote site router) but the LMI does also... I thought the LMI type was only significant from that router to its telco frame-relay switch. Comments? thanks Cory R. Stull MCSE, Bay Router Specialist, CCNA,CCDA Communications Concepts Unlimited 262-814-7214 **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: frame-relay lmi question...
I found in my CCNA notes that the LMI-type only needs to be specified for IOS ver 11.1 and earlier, 11.2 and up its autosensed. It says if using 11.1 or earlier, specify the type used by the switch (telco). It should not matter at all whats on the other end, its is only concerned with the local connection between the local router and the local telco switch. Does that sound right? -Original Message- From: Ole Drews Jensen [mailto:[EMAIL PROTECTED]] Sent: Wednesday, September 20, 2000 6:35 PM To: 'Stull, Cory'; '[EMAIL PROTECTED]' Subject: RE: frame-relay lmi question... I am on your side Cory - the L in LMI stands for LOCAL, and the LMI type has to be the same between your router and the frame-relay switch it is connecting to. I found some more info about it here... http://www.ieng.com/warp/public/779/smbiz/service/troubleshooting/ts_fr.htm# Step%202 (watch for wordwrap) If someone has a different opinion, please copy me in on the reply. Hth, Ole Ole Drews Jensen Systems Network Manager CCNA, MCSE, MCP+I RWR Enterprises, Inc. [EMAIL PROTECTED] http://www.insync.net/~drews/ccnp -Original Message- From: Stull, Cory [mailto:[EMAIL PROTECTED]] Sent: Wednesday, September 20, 2000 11:23 AM To: '[EMAIL PROTECTED]' Subject: frame-relay lmi question... I'm reading a CIT book that is saying that not only does frame-relay encapsulation have to be the same on both sides (central site to remote site router) but the LMI does also... I thought the LMI type was only significant from that router to its telco frame-relay switch. Comments? thanks Cory R. Stull MCSE, Bay Router Specialist, CCNA,CCDA Communications Concepts Unlimited 262-814-7214 **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: frame-relay lmi question...
Yes, that is correct. IOS 11.2 and later will autosense the LMI type. It is possible that the LMI cannot be decoded, and in that event, you may have to manually set the type. (i.e. frame-relay lmi-type ansi ) http://www.cisco.com/univercd/cc/td/doc/product/software/ios113ed/113ed_cr/w an_c/wcfrelay.htm#xtocid234328 K - Kristopher B. Climie, CCNP, CCDP ""Johns, Andrew M ETC (CNE N654)"" <[EMAIL PROTECTED]> wrote in message 83C7493FDD74D411859D0001029FBE0DE236@CNE-MAIL2">news:83C7493FDD74D411859D0001029FBE0DE236@CNE-MAIL2... > I found in my CCNA notes that the LMI-type only needs to be specified for > IOS ver 11.1 and earlier, 11.2 and up its autosensed. It says if using 11.1 > or earlier, specify the type used by the switch (telco). It should not > matter at all whats on the other end, its is only concerned with the local > connection between the local router and the local telco switch. Does that > sound right? > > -Original Message- > From: Ole Drews Jensen [mailto:[EMAIL PROTECTED]] > Sent: Wednesday, September 20, 2000 6:35 PM > To: 'Stull, Cory'; '[EMAIL PROTECTED]' > Subject: RE: frame-relay lmi question... > > > I am on your side Cory - the L in LMI stands for LOCAL, and the LMI type has > to be the same between your router and the frame-relay switch it is > connecting to. > > I found some more info about it here... > > http://www.ieng.com/warp/public/779/smbiz/service/troubleshooting/ts_fr.htm# > Step%202 > > (watch for wordwrap) > > If someone has a different opinion, please copy me in on the reply. > > Hth, > > Ole > > > Ole Drews Jensen > Systems Network Manager > CCNA, MCSE, MCP+I > RWR Enterprises, Inc. > [EMAIL PROTECTED] > http://www.insync.net/~drews/ccnp > > > > > > > -Original Message- > From: Stull, Cory [mailto:[EMAIL PROTECTED]] > Sent: Wednesday, September 20, 2000 11:23 AM > To: '[EMAIL PROTECTED]' > Subject: frame-relay lmi question... > > > > I'm reading a CIT book that is saying that not only does frame-relay > encapsulation have to be the same on both sides (central site to remote site > router) but the LMI does also... I thought the LMI type was only > significant from that router to its telco frame-relay switch. > > Comments? > > > thanks > > > Cory R. Stull > MCSE, Bay Router Specialist, CCNA,CCDA > Communications Concepts Unlimited > 262-814-7214 > > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > http://www.groupstudy.com/list/Associates.html > _ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > http://www.groupstudy.com/list/Associates.html > _ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > http://www.groupstudy.com/list/Associates.html > _ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]