Try to mount it with these command :
[root@desktop kernell32]# umount /mnt/cdrom
[root@desktop kernell32]# mount /dev/sda4 -t vfat /mnt/cdrom
On Mon, 16 Oct 2000, you wrote:
I get io errors when trying to access my removable drives if this
problem is known ignore this message =)
All my drives f***ed up whn i try to access them i get io errors even
thow they are detected
in kde its "you dont have access permission to this location"
[root@desktop kernell32]# cd /mnt/cdrom
bash: cd: /mnt/cdrom: Input/output error
[root@desktop kernell32]# dmesg
Linux version 2.2.17-11mdk ([EMAIL PROTECTED]) (gcc version
2.95.3 19991030 (prerelease)) #1 Wed Sep 20 13:03:45 CEST 2000
Detected 553899 kHz processor.
ide_setup: hdd=ide-scsi
Console: colour VGA+ 80x25
Calibrating delay loop... 1104.28 BogoMIPS
Memory: 127576k/131072k available (1216k kernel code, 416k reserved,
1724k data, 140k init, 0k bigmem)
Dentry hash table entries: 16384 (order 5, 128k)
Buffer cache hash table entries: 131072 (order 7, 512k)
Page cache hash table entries: 32768 (order 5, 128k)
VFS: Diskquotas version dquot_6.4.0 initialized
CPU: L1 I Cache: 64K L1 D Cache: 64K
CPU: L2 Cache: 512K
CPU: AMD Athlon(tm) Processor stepping 01
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819) Richard Gooch ([EMAIL PROTECTED])
PCI: PCI BIOS revision 2.10 entry at 0xfd9e1, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Enabling I/O for device 00:00
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
TCP: Hash tables configured (ehash 131072 bhash 65536)
Initializing RT netlink socket
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
Serial driver version 4.27 with MANY_PORTS MULTIPORT SHARE_IRQ enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
apm: BIOS not found.
Real Time Clock Driver v1.09
RAM disk driver initialized: 16 RAM disks of 4096K size
Uniform Multi-Platform E-IDE driver Revision: 6.30
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 21
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
AMD IronGate
Chipset Core ATA-66
Split FIFO Configuration: 8 Primary buffers, threshold = 1/2
8 Second. buffers, threshold = 1/2
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
ide0: VIA Bus-Master (U)DMA Timing Config Success
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
ide1: VIA Bus-Master (U)DMA Timing Config Success
hda: ST320423A, ATA DISK drive
hdc: QUANTUM FIREBALL CR8.4A, ATA DISK drive
hdd: Hewlett-Packard CD-Writer Plus 7500, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: ST320423A, 19536MB w/512kB Cache, CHS=2490/255/63
hdc: QUANTUM FIREBALL CR8.4A, 8063MB w/418kB Cache, CHS=16383/16/63
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12
raid5: measuring checksumming speed
raid5: MMX detected, trying high-speed MMX checksum routines
pII_mmx : 1270.635 MB/sec
p5_mmx: 1592.199 MB/sec
8regs : 738.759 MB/sec
32regs: 649.224 MB/sec
using fastest function: p5_mmx (1592.199 MB/sec)
scsi : 0 hosts.
scsi : detected total.
md.c: sizeof(mdp_super_t) = 4096
Partition check:
hda: hda1 hda2 hda5 hda6 hda7
hdc: [PTBL] [1027/255/63] hdc1
autodetecting RAID arrays
autorun ...
autorun DONE.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 140k freed
Adding Swap: 248968k swap-space (priority -1)
es1371: version v0.22 time 13:09:54 Sep 20 2000
es1371: found chip, vendor id 0x1274 device id 0x1371 revision 0x06
es1371: found es1371 rev 6 at io 0xd000 irq 9
es1371: features: joystick 0x0
es1371: codec vendor CRY (0x435259) revision 19 (0x13)
es1371: codec features Headphone out 20bit DAC 18bit ADC
es1371: stereo enhancement: Crystal Semiconductor 3D Stereo Enhancement
ne2k-pci.c:vpre-1.00e 5/27/99 D. Becker/P. Gortmaker
http://cesdis.gsfc.nasa.gov/linux/drivers/ne2k-pci.html
ne2k-pci.c: PCI NE2000 clone 'RealTek RTL-8029' at I/O 0xcc00, IRQ 10.
eth0: RealTek RTL-8029 found at 0xcc00, IRQ 10, 00:00:E8:72:C2:6B.
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.232 $ time 13:10:49 Sep 20 2000
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 10
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
usb.c: USB new device connect, assigned device number 1
hub.c: USB hub found
hub.c: 2 ports
