Bug#992519: installation-reports
Package: installation-reports Boot method: >From a working Debian 11, mounted an image of Debian 11, and modified /etc/apt/sources.list to use this, and other Bullseye repositories. Image version: Debian 11 iso plus internet Date: Soon after official Debian 11 officially became stable Machine: HP Spectre x360 Convertible 15-df0xxx Processor: Intel(R) Core(TM) i7-8750H CPU Memory: 16GiB Partitions: Separate '/home' and '/' Output of lspci -knn (or lspci -nn): See end of this message Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [E] Detect network card:[O] Configure network: [O] Detect media: [O] Load installer modules: [ ] Detect hard drives: [O] Partition hard drives: [ ] Install base system:[ ] Clock/timezone setup: [?] User/password setup:[ ] Install tasks: [O] Install boot loader:[O] Overall install:[E] Comments/Problems: Normally from off it only takes like 15 seconds to be completely loaded and logged in. After install time to start up was way over a minute more, and then same after logging in. Things seemed to be mostly working ok after that. I noticed that it wouldn't ping the ntp server. Internet/Firefox was working. Hibernate and suspend didn't work (they didn't work under Debian 10 either, I think they may have worked with kernel 5.4 but not Debian's 10's kernels 4.19 and 5.10) Decided to revert back to Debian 10 due to this log in delay being way too long, etc... (using the partition backup I made right before installing 11) Tried 1st just putting my backup of '/' partition (without restoring '/home' as well for now) and there were KDEPIM issues. Also the pre-grub 'splash' welcome to grub text stayed from the Debian 11 install. There wasn't one before. (is there a way to make it not show this?) -- Note: These are from Debian 10 after reverting back from Debian 11 lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation 8th Gen Core Processor Host Bridge/DRAM Registers [8086:3ec4] (rev 07) 00:01.0 PCI bridge [0604]: Intel Corporation Skylake PCIe Controller (x16) [8086:1901] (rev 07) 00:02.0 VGA compatible controller [0300]: Intel Corporation UHD Graphics 630 (Mobile) [8086:3e9b] 00:04.0 Signal processing controller [1180]: Intel Corporation Skylake Processor Thermal Subsystem [8086:1903] (rev 07) 00:12.0 Signal processing controller [1180]: Intel Corporation Cannon Lake PCH Thermal Controller [8086:a379] (rev 10) 00:13.0 Serial controller [0700]: Intel Corporation Device [8086:a37c] (rev 10) 00:14.0 USB controller [0c03]: Intel Corporation Cannon Lake PCH USB 3.1 xHCI Host Controller [8086:a36d] (rev 10) 00:14.2 RAM memory [0500]: Intel Corporation Cannon Lake PCH Shared SRAM [8086:a36f] (rev 10) 00:14.3 Network controller [0280]: Intel Corporation Wireless-AC 9560 [Jefferson Peak] [8086:a370] (rev 10) 00:15.0 Serial bus controller [0c80]: Intel Corporation Cannon Lake PCH Serial IO I2C Controller [8086:a368] (rev 10) 00:15.1 Serial bus controller [0c80]: Intel Corporation Cannon Lake PCH Serial IO I2C Controller [8086:a369] (rev 10) 00:16.0 Communication controller [0780]: Intel Corporation Cannon Lake PCH HECI Controller [8086:a360] (rev 10) 00:1b.0 PCI bridge [0604]: Intel Corporation Cannon Lake PCH PCI Express Root Port [8086:a340] (rev f0) 00:1d.0 PCI bridge [0604]: Intel Corporation Cannon Lake PCH PCI Express Root Port [8086:a330] (rev f0) 00:1d.7 PCI bridge [0604]: Intel Corporation Cannon Lake PCH PCI Express Root Port [8086:a337] (rev f0) 00:1f.0 ISA bridge [0601]: Intel Corporation Device [8086:a30d] (rev 10) 00:1f.3 Multimedia audio controller [0401]: Intel Corporation Cannon Lake PCH cAVS [8086:a348] (rev 10) 00:1f.4 SMBus [0c05]: Intel Corporation Cannon Lake PCH SMBus Controller [8086:a323] (rev 10) 00:1f.5 Serial bus controller [0c80]: Intel Corporation Cannon Lake PCH SPI Controller [8086:a324] (rev 10) 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GP107M [GeForce GTX 1050 Ti Mobile] [10de:1c8c] (rev a1) 01:00.1 Audio device [0403]: NVIDIA Corporation GP107GL High Definition Audio Controller [10de:0fb9] (rev a1) 02:00.0 PCI bridge [0604]: Intel Corporation JHL7540 Thunderbolt 3 Bridge [Titan Ridge 4C 2018] [8086:15ea] (rev 06) 03:00.0 PCI bridge [0604]: Intel Corporation JHL7540 Thunderbolt 3 Bridge [Titan Ridge 4C 2018] [8086:15ea] (rev 06) 03:01.0 PCI bridge [0604]: Intel Corporation JHL7540 Thunderbolt 3 Bridge [Titan Ridge 4C 2018] [8086:15ea] (rev 06) 03:02.0 PCI bridge [0604]: Intel Corporation JHL7540 Thunderbolt 3 Bridge [Titan Ridge 4C 2018] [8086:15ea] (rev 06) 03:04.0 PCI bridge [0604]: Intel Corporation JHL7540 Thunderbolt 3 Bridge [Titan Ridge 4C 2018] [8086:15ea] (rev 06) 04:00.0 System peripheral [0880]: Intel Corporation JHL7540 Thunderbolt 3 NHI [Titan Ridge 4C 2018] [8086:15eb] (rev 06) 38:00.0 USB controller [0c03]: Intel Corporation JHL7540 Thunderbolt 3 USB Controller [Titan Ridge 4C 2018] [80
Processed: Re: Bug#982194: choose-mirror: Rename mirror.netcologne.de to debian.netcologne.de
Processing control commands: > reassign -1 mirrors Bug #982194 [choose-mirror] choose-mirror: Rename mirror.netcologne.de to debian.netcologne.de Bug reassigned from package 'choose-mirror' to 'mirrors'. No longer marked as found in versions choose-mirror/2.109. Ignoring request to alter fixed versions of bug #982194 to the same values previously set > tag -1 moreinfo Bug #982194 [mirrors] choose-mirror: Rename mirror.netcologne.de to debian.netcologne.de Added tag(s) moreinfo. -- 982194: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=982194 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems
Bug#982194: choose-mirror: Rename mirror.netcologne.de to debian.netcologne.de
Control: reassign -1 mirrors Control: tag -1 moreinfo On Sun, Feb 07, 2021 at 11:40:32AM +0100, Roland Rosenfeld wrote: > I noticed the following change in Git commit d51997a5: > > -Site: debian.netcologne.de > +Site: mirror.netcologne.de > +Alias: debian.netcologne.de > > This wasn't a very good idea, since I'd like to train users to use > debian.netcologne.de as their mirror name. So I can change the CNAME > debian.netcologne.de pointing somewhere else (for example to > mirror3.netcologne.de or ftp.de.debian.org) on maintenance or > emergency. > > This said, mirror.netcologne.de shouldn't be used directly as a debian > mirror. > > It would be great if you could undo the above change at least for > bullseye. > That would need a change on the site, for monitoring we require the mirror name to match its trace file, and currently that is http://mirror.netcologne.de/debian/project/trace/mirror.netcologne.de If you update MIRRORNAME in ftpsync.conf and let us know we can update the mirror list to match. Cheers, Julien
Bug#927760: marked as done (choose-mirror: deb.debian.org should be advertised as supporting debian-ports)
Your message dated Thu, 19 Aug 2021 16:48:15 +0200 with message-id and subject line Re: Bug#927760: choose-mirror: deb.debian.org should be advertised as supporting debian-ports has caused the Debian Bug report #927760, regarding choose-mirror: deb.debian.org should be advertised as supporting debian-ports to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 927760: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=927760 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems --- Begin Message --- Package: choose-mirror Version: 2.99 Severity: normal Hello, I don't know the file generation details, but Mirrors.masterlist currently doesn't include Ports-architecture:, while it does support it, and I guess it would be preferred to get load balancing. (of course, Bug#879130 needs to be resolved to get it to actually show up) Samuel -- System Information: Debian Release: buster/sid APT prefers testing APT policy: (990, 'testing'), (500, 'unstable-debug'), (500, 'testing-debug'), (500, 'stable-debug'), (500, 'proposed-updates-debug'), (500, 'proposed-updates'), (500, 'oldoldstable'), (500, 'buildd-unstable'), (500, 'unstable'), (500, 'stable'), (500, 'oldstable'), (1, 'experimental-debug'), (1, 'buildd-experimental'), (1, 'experimental') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 5.0.0 (SMP w/8 CPU cores) Kernel taint flags: TAINT_OOT_MODULE Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8), LANGUAGE=fr_FR.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) -- Samuel je sens venir la fonte 14 pour le rapport -+- #ens-mim -+- --- End Message --- --- Begin Message --- Version: 2.101 On Mon, Apr 22, 2019 at 09:57:28PM +0200, Samuel Thibault wrote: > Package: choose-mirror > Version: 2.99 > Severity: normal > > Hello, > > I don't know the file generation details, but Mirrors.masterlist > currently doesn't include Ports-architecture:, while it does support it, > and I guess it would be preferred to get load balancing. > That was added a while back; closing. Cheers, Julien--- End Message ---
Bug#992169: marked as done (installation-reports: Cinnamon does not automatically start screen reader on login)
Your message dated Thu, 19 Aug 2021 10:03:31 + with message-id and subject line Bug#992169: fixed in brltty 6.4~pre-1 has caused the Debian Bug report #992169, regarding installation-reports: Cinnamon does not automatically start screen reader on login to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 992169: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=992169 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems --- Begin Message --- Package: installation-reports Severity: important X-Debbugs-Cc: isy-deb...@koipond.org.uk (Please provide enough information to help the Debian maintainers evaluate the report efficiently - e.g., by filling in the sections below.) Boot method: USB Image version: 11.0.0 amd64 netinst Date: Machine: thinkpad x220 ... Comments/Problems: On cinnamon DI from the live image disk with speech synthesis, the screen reader was on on the login screen, but once logged in, the screen reader was not on and had to be turned on manually from the applications menu. This was also the case on amd64 netinst. Looks like a bug in Cinnamon, as other DEs tested did not seem to do the same thing. --- End Message --- --- Begin Message --- Source: brltty Source-Version: 6.4~pre-1 Done: Samuel Thibault We believe that the bug you reported is fixed in the latest version of brltty, which is due to be installed in the Debian FTP archive. A summary of the changes between this version and the previous one is attached. Thank you for reporting the bug, which will now be closed. If you have further comments please address them to 992...@bugs.debian.org, and the maintainer will reopen the bug report if appropriate. Debian distribution maintenance software pp. Samuel Thibault (supplier of updated brltty package) (This message was generated automatically at their request; if you believe that there is a problem with it please contact the archive administrators by mailing ftpmas...@ftp-master.debian.org) -BEGIN PGP SIGNED MESSAGE- Hash: SHA512 Format: 1.8 Date: Thu, 19 Aug 2021 11:43:58 +0200 Source: brltty Architecture: source Version: 6.4~pre-1 Distribution: experimental Urgency: medium Maintainer: Debian Accessibility Team Changed-By: Samuel Thibault Closes: 992169 Changes: brltty (6.4~pre-1) experimental; urgency=medium . * New upstream snapshot. - patches/41-java-bytecode-compat.patch: Refresh. - rules: Disable liblouis support in udeb. - brltty-udeb.udev.rules: Update udev rules. * brltty-udeb.prebaseconfig: Enable screen reader in Cinnamon (Closes: Bug#992169). * gbp.conf: Use filter to clean upstream tarball. Checksums-Sha1: 6af0096faab920bf6cf596ec38b1b6b8598c5122 3322 brltty_6.4~pre-1.dsc 3c52a297e22563560be44ca71a8732e7339d2681 3054976 brltty_6.4~pre.orig.tar.xz 05e4d79d1a2a1daa41312800edf5ed6ebffe021f 34024 brltty_6.4~pre-1.debian.tar.xz 43bf59f6897992391c744007571db2886be25d3f 18015 brltty_6.4~pre-1_amd64.buildinfo Checksums-Sha256: 8688c7357c3681cd32d5d282f7e9363425b32899126c01be73fd748ddf6760a4 3322 brltty_6.4~pre-1.dsc 40b02640705a081b5ee1c4aeb83754873939c0b25b43a65aefcc52a49ee0653b 3054976 brltty_6.4~pre.orig.tar.xz 5ea3642b28a23bf23def51078490b8c25c3e1c7918406cbdd83dd41f309dc8b0 34024 brltty_6.4~pre-1.debian.tar.xz 881947ccc45c17a5b6d9ce8568cd52debf5096221ea4dced257a71614e1d7e58 18015 brltty_6.4~pre-1_amd64.buildinfo Files: bae6af0582ff69cd3969070678b4a8df 3322 admin optional brltty_6.4~pre-1.dsc 0f39d7593e2c93c415acff7d53a9612c 3054976 admin optional brltty_6.4~pre.orig.tar.xz aa45496c7a7c51ad44ca381da5d8e8a8 34024 admin optional brltty_6.4~pre-1.debian.tar.xz 39900c628403de86472cdfc140fa920d 18015 admin optional brltty_6.4~pre-1_amd64.buildinfo -BEGIN PGP SIGNATURE- iQIzBAEBCgAdFiEE59DSENomQIYa2nfqRdTszGSEm3kFAmEeKYAACgkQRdTszGSE m3k08RAAwLG6gXtVfUyM4Zly1RaDdkjibVF9RzYap/idN1yRzWxMv7WJrkJFPiO2 /ou4bSPStuPyNNHnDIt1jjSdaqOBM1bwTUbuCmt5MgeVhO1BumKCTxQx5g2QcToq QvFsYdF/zKWGAeT/lJ6CDJXZVib+D0GVK3tgpwe8BErZzSbpLr/nP0BMmDGJH1r9 jNd4BCOYOJz9ShMl8lQQOv8yoMnt6m8HpLTJhE9uY+RqT/FM5R1ONsr6eSHnZD0i 4FKsZN0LNQQjjT2UEaMhdiVfWOPxiNdanHCRpluHqeQfSY7MY6kRmzg/O/h2sojV i6vkd4OLXWsfez8hkrPgh/31HRxHntpUY90rZf05awqEkARRbH76Q9/15uq0RG+J qy1KN0otaXpmO1g564l+MMnMaVtHj9kFL4OG+fD0cRvUr2QoM4EhGRp960A1LOWS 39Vuv39ESFbKtaVRAhL2lxPgK0Ue0X2PcEIguZ6+ZM/Jh3CYkFkx3EXJ0ew/RkCO s3TDNpvxMOsDfdbVp1x8l0NxNMfwqpXIfstQ50Vgu35pEHUJ7atK9EpmKIqlnhZ9 xMm5ZGSc3yF7/8HJK19P3gPARKNUfXPr40RzgwA7CNREbKAYPCQac2FEE7jHThfC IaPzjuN2yXwswfOPc6pJBj2uLBf8tWVWYCKFQYqfOIi7THAV/II= =4foA -END PGP SIGNATURE End Message ---
Debian-boot This is the cooperation information of China smart lock 15:31:38
Dear Debian-boot :We can provide all kinds of smart locks with good cost performance. Which can help you earn more profits.Hope to cooperate with you.Please write back to me, thank you.
Bug#992457: Broken by irresponsible removal of tempfile in debianutils
Control: retitle -1 FTBFS: uses tempfile in build, appears to use deprecated which(1) A closer look indicates that tempfile is only actually used to build the package. The apparent use of which(1) is actually a shell function, however… On Wed, Aug 18, 2021, at 16:18, Cyril Brulebois wrote: > > Presumably /installer-team/console-setup would be a better package to > > patch, unless cdebconf uses tempfile somehow. 😉 I'll see what I can > > do this evening. 🙂 > > Sure thing, miscompleted in my browser history plus slightly distracted, > sorry. As suggested before, I'm fluent in IRC, so I read what you meant. 😁 MY goof was breaking my initramfs, being _completely_ unable to read the tiny font, reverting to backup, futzing with it, seeing tempfile and which being called in setupcon, and having to go to work before I could dig much deeper. As noted, tempfile is only actually used to build the package. Fixed that. Left the function in setupcon alone. The apparent use of which all over the place is also a shell function, but the shell function just emulates command -v, so I subbed that out and removed the functions while I was at it. Tested the result on amd64 with amdgpu added to initramfs for early KMS so that I can take advantage of Plymouth for status messages I have some chance of being able to use, and a crypttab prompt that doesn't get lost in the impossibly small console text. I realized while composing the email that my patch has some trailing whitespace removal—nvim is configured to do that to source files as it's usually desirable for git sanity, but I should've trimmed those hunks out of the patch and retested. I don't have time to do that tonight because I can't conveniently just reboot right now, so I'll send you the patch as tested. Feel free to omit purely whitespace change hunks. You can maybe guess the major thrust of my attempts to fiddle with console-setup around the time this all happened: You don't even try to set the font in the initramfs anymore, and I've never actually figured out why Ubuntu's combination of console-setup and plymouth manages to just work and Debian's just doesn't—I've spent a little time prodding at packages from both. I mostly know my way around a Debian system I think—when I reinstalled this machine about two weeks ago, I found that neither old nor new installer was really set up to preserve my LUKS devices with LVM on them, keep some partitions and format others, etc … so I just grabbed a live USB and installed the system with debootstrap. It … was faster than trying ti figure out if or how Calamares could do that, and I know the shell of the old debian installer didn't provide shell UI I'd need to open the LUKS partitions so the partitioner could use them without obliterating anything "helpfully" for me. *shrug* I've gotten way off topic now, but I think I just need to write a hook to throw in setfont and the font to set along with some quick and dirty initramfs scripts to make sure it dances around plymouth. I had to do something similar with a MBP to work around proprietary Apple crap. Anyway, hope this is useful. Salsa didn't exist when last I might've had an account on it to be able to actually finish this up as a PR. I've considered changing that a time or two. Perhaps when the Covidium passes. Joseph diff -Nru console-setup.orig/debian/console-setup.config console-setup/debian/console-setup.config --- console-setup.orig/debian/console-setup.config 2021-08-18 22:17:59.892444554 -0700 +++ console-setup/debian/console-setup.config 2021-08-18 22:42:21.524213193 -0700 @@ -64,7 +64,7 @@ # fontsets='Arabic-Fixed15 # Arabic-Fixed16 # Arabic-VGA14 -# ... +# ... # Vietnamese-Fixed18 # ' @@ -104,18 +104,6 @@ db_capb backup -which () { -local IFS -IFS=: -for i in $PATH; do - if [ -f "$i/$1" -a -x "$i/$1" ]; then - echo "$i/$1" - return 0 - fi -done -return 1 -} - available_fontfaces () { local prefix case "$CODESET" in @@ -195,14 +183,14 @@ } kernel=unknown -if which uname >/dev/null; then +if command -v uname >/dev/null; then case "`uname`" in *Linux*) kernel=linux ;; *FreeBSD*) kernel=freebsd ;; esac fi -if which locale 2>/dev/null >/dev/null; then +if command -v locale 2>/dev/null >/dev/null; then eval `locale` fi @@ -217,7 +205,7 @@ if [ "$locale" = C ]; then CHARMAP=ISO-8859-15 charmap_priority=high -elif which locale 2>/dev/null >/dev/null; then +elif command -v locale 2>/dev/null >/dev/null; then CHARMAP=`locale charmap` else CHARMAP=unknown diff -Nru console-setup.orig/debian/console-setup-udeb.postinst console-setup/debian/console-setup-udeb.postinst --- console-setup.orig/debian/console-setup-udeb.postinst 2021-08-18 22:17:59.892444554 -0700 +++ console-setup/debian/console-setup-udeb.postinst 2021-08-18 22:43:48.226081884 -0700 @@ -5,20 +5,6 @@ # Source debconf library. . /usr/share/debconf/confmodule
Processed: Re: Bug#992457: Broken by irresponsible removal of tempfile in debianutils
Processing control commands: > retitle -1 FTBFS: uses tempfile in build, appears to use deprecated which(1) Bug #992457 [console-setup] Broken by removal of tempfile in debianutils Changed Bug title to 'FTBFS: uses tempfile in build, appears to use deprecated which(1)' from 'Broken by removal of tempfile in debianutils'. -- 992457: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=992457 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems