Bug#801391: drbd-utils: shared-secret support 63 characters, not 64
Package: drbd-utils Version: 8.9.2~rc1-2 Severity: minor Dear Maintainer, The manual says that the shared-secret option "May be up to 64 characters", but if you use 64 character you get: Failure: (126) UnknownMandatoryTag invalid attribute value Command ... terminated with exit code 10 However, 63 characters work perfectly fine. /Björn Påhlsson -- System Information: Debian Release: 8.2 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'proposed-updates'), (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 3.16.0-4-amd64 (SMP w/4 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages drbd-utils depends on: ii init-system-helpers 1.22 ii libc62.19-18+deb8u1 ii perl 5.20.2-3+deb8u1 Versions of packages drbd-utils recommends: ii bsd-mailx [mailx] 8.1.2-0.20141216cvs-2 Versions of packages drbd-utils suggests: pn heartbeat -- no debconf information
Bug#778530: phpbb3: Q&A Captcha allows bots when new language packs are installed
Package: phpbb3 Version: 3.0.10-4+deb7u2 Severity: normal Tags: upstream The Q&A captcha plugin normally does not allow an empty question set as per the manual, section "How to configure Q&A CAPTCHA". However, if you install a language pack after you have configured the Q&A, the enabled Q&A for the new languages will have an empty question set, allowing bots to register without *any* security checks. The result that installing language packs impacts security seems as a non-obvious effect. Either a warning, a safer failure of the Q&A CAPTCHA, or having empty language sets falling back to other languages would be a large improvement to the current situation. /Björn Påhlsson -- System Information: Debian Release: 7.8 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'proposed-updates'), (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 3.16.0-0.bpo.4-amd64 (SMP w/16 CPU cores) Locale: LANG=C, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages phpbb3 depends on: ii apache22.2.22-13+deb7u4 ii apache2-mpm-itk [httpd]2.2.22-13+deb7u4 ii boa [httpd]0.94.14rc21-3.1 ii dbconfig-common1.8.47+nmu1 ii debconf [debconf-2.0] 1.5.49 ii libapache2-mod-php55.4.36-0+deb7u3 ii mysql-client 5.5.41-0+wheezy1 ii mysql-client-5.5 [mysql-client]5.5.41-0+wheezy1 ii php5 5.4.36-0+deb7u3 ii php5-cgi 5.4.36-0+deb7u3 ii php5-cli 5.4.36-0+deb7u3 ii php5-gd5.4.36-0+deb7u3 ii php5-mysql 5.4.36-0+deb7u3 ii php5-pgsql 5.4.36-0+deb7u3 ii php5-sqlite5.4.36-0+deb7u3 ii postgresql-client 9.1+134wheezy4 ii postgresql-client-9.1 [postgresql-client] 9.1.15-0+deb7u1 ii ucf3.0025+nmu3 Versions of packages phpbb3 recommends: ii php5-imagick3.1.0~rc1-1+b2 ii postfix [mail-transport-agent] 2.9.6-2 Versions of packages phpbb3 suggests: ii mysql-server 5.5.41-0+wheezy1 ii phpbb3-l10n 3.0.10-4+deb7u2 ii postgresql9.1+134wheezy4 -- debconf information excluded -- debsums errors found: debsums: changed file /usr/share/phpbb3/www/includes/functions_profile_fields.php (from phpbb3 package) -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#686441: RFP: autocrypt-milter -- A milter which encrypts outgoing mail using keys from CERT DNS records
Package: wnpp Severity: wishlist * Package name: autocrypt-milter Version : 1.0.0 Upstream Author : Björn Påhlsson * URL : http://www.recompile.se/~belorn/autocrypt * License : GPL3+ Programming Lang: Python Description : A milter which encrypts outgoing mail using keys from CERT DNS records OpenPGP keys can be stored in the DNS using RFC 4398. Using this, outgoing mail can be scanned for destination addresses, those addresses searched for DNS CERT records, and, if any are found, the mail can be encrypted to those recipients. DNSSEC can be used to get a reasonable amount of ensurance of getting the correct key. This program is a milter which does this. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#668834: gnome-shell: On Laptop lid close action: Nothing - It is still doing stuff!
Package: gnome-shell Version: 3.2.2.1-3 Severity: normal Tags: upstream Dear Maintainer, If one put laptop lid close action battery/AC to Nothing, it still sends signals through VGA port to shutdown. This mean you can not use a external monitor and view something while having the lid closed. /Björn Påhlsson -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'stable'), (50, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 3.2.0-2-amd64 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages gnome-shell depends on: ii dconf-gsettings-backend [gsettings-backend] 0.10.0-3 ii gconf-service3.2.3-4 ii gir1.2-accountsservice-1.0 0.6.15-4 ii gir1.2-atk-1.0 2.4.0-2 ii gir1.2-caribou-1.0 0.4.2-2 ii gir1.2-clutter-1.0 1.8.4-1 ii gir1.2-cogl-1.0 1.8.2-1 ii gir1.2-coglpango-1.0 1.8.2-1 ii gir1.2-folks-0.6 0.6.8-2 ii gir1.2-freedesktop 1.32.0-1 ii gir1.2-gconf-2.0 3.2.3-4 ii gir1.2-gdkpixbuf-2.0 2.26.0-2 ii gir1.2-gee-1.0 0.6.4-1 ii gir1.2-gkbd-3.0 3.4.0.2-1 ii gir1.2-glib-2.0 1.32.0-1 ii gir1.2-gmenu-3.0 3.2.0.1-2 ii gir1.2-gnomebluetooth-1.03.2.2-1 ii gir1.2-gtk-3.0 3.2.3-1 ii gir1.2-json-1.0 0.14.2-1 ii gir1.2-mutter-3.03.2.2-1 ii gir1.2-networkmanager-1.00.9.4.0-3 ii gir1.2-pango-1.0 1.30.0-1 ii gir1.2-polkit-1.00.104-2 ii gir1.2-soup-2.4 2.38.0-1 ii gir1.2-telepathyglib-0.120.16.2-1+b1 ii gir1.2-telepathylogger-0.2 0.2.12-1 ii gir1.2-upowerglib-1.00.9.15-3 ii gjs 1.30.1-1 ii gnome-bluetooth 3.2.2-1 ii gnome-icon-theme-symbolic3.4.0-2 ii gnome-settings-daemon3.2.2-3 ii gnome-shell-common 3.2.2.1-3 ii gsettings-desktop-schemas3.2.0-2 ii libatk1.0-0 2.4.0-2 ii libc62.13-27 ii libcairo-gobject21.12.0-2 ii libcairo21.12.0-2 ii libcamel-1.2-29 3.2.2-3 ii libcanberra0 0.28-4 ii libclutter-1.0-0 1.8.4-1 ii libcogl-pango0 1.8.2-1 ii libcogl5 1.8.2-1 ii libcroco30.6.5-1 ii libdbus-1-3 1.5.12-1 ii libdbus-glib-1-2 0.98-1 ii libdrm2 2.4.33-1 ii libebook-1.2-12 3.2.2-3 ii libecal-1.2-10 3.2.2-3 ii libedataserver-1.2-153.2.2-3 ii libedataserverui-3.0-1 3.2.2-3 ii libffi5 3.0.10-3 ii libfolks25 0.6.8-2 ii libfontconfig1 2.8.0-3.1 ii libfreetype6 2.4.9-1 ii libgconf-2-4 3.2.3-4 ii libgdk-pixbuf2.0-0 2.26.0-2 ii libgee2 0.6.4-1 ii libgirepository-1.0-11.32.0-1 ii libgjs0b [libgjs0-libmozjs185-1.0] 1.30.1-1 ii libgl1-mesa-glx [libgl1] 7.11.2-1 ii libglib2.0-0 2.32.0-3 ii libgnome-desktop-3-2 3.2.1-4 ii libgnome-keyring03.4.0-1 ii libgnome-menu-3-03.2.0.1-2 ii libgstreamer0.10-0 0.10.36-1 ii libgtk-3-0 3.2.3-1 ii libical0 0.48-1 ii libjson-glib-1.0-0 0.14.2-1 ii libmozjs185-1.0 1.8.5-1.0.0+dfsg-3 ii libmutter0 3.2.2-1 ii libnm-glib4 0.9.4.0-3 ii libnm-util2 0.9.4.0-3 ii libnspr4-0d 4.9-1 ii libnss3-1d
Bug#648609: gnome: Load icons for applications on demand
Package: gnome Version: 1:3.0+5 Severity: wishlist Tags: upstream Dear Maintainers, When using the applications tab, it lists all applications on the system. This takes quite a while to load when you have many applications. On my system, it takes around 20 seconds to load the applications tab, which mean 20 seconds of frozen computer time. What I would suggest is to only load the first ~40-60 icons from the application list, and then load the rest on demand while the user scrolls down the list. -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'oldstable'), (50, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 3.0.0-2-amd64 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages gnome depends on: ii abiword 2.9.1-0.1 ii alacarte 0.13.2-3 ii avahi-daemon 0.6.30-5 ii cheese 3.2.0-1 ii desktop-base 6.0.7 ii ekiga3.2.7-4.1 ii epiphany-extensions 3.0.0-3 ii evolution3.0.3-2 ii evolution-plugins3.0.3-2 ii file-roller 3.0.2-2 ii gedit3.0.6-2 ii gedit-plugins3.0.6-1 ii gimp 2.6.11-5 ii gnome-applets3.2.1-1 ii gnome-core 1:3.0+5 ii gnome-games 1:3.0.2-2 ii gnome-media 2.91.2-3 ii gnome-nettool3.0.0-2 ii gnumeric 1.10.17-1+b1 ii gstreamer0.10-ffmpeg 1:0.10.12-0.0 ii gstreamer0.10-plugins-ugly 0.10.18-3+b1 ii gvfs-bin 1.8.2-2 ii hamster-applet 2.91.3+git20110714.9aefd7-2 ii inkscape 0.48.1-2.1+b1 ii libgtk2-perl 2:1.223-1+b1 ii libreoffice-gnome1:3.4.4-1 ii nautilus-sendto 3.0.1-2 ii rhythmbox2.90.1~git20110919.2dfea6-3 ii rhythmbox-plugin-cdrecorder 2.90.1~git20110919.2dfea6-3 ii rhythmbox-plugins2.90.1~git20110919.2dfea6-3 ii seahorse 3.0.2-1 ii shotwell 0.11.5-1 ii simple-scan 3.2.0-1 ii sound-juicer 2.32.1+git20111010.2d5deeb-1 ii telepathy-gabble 0.13.7-1 ii telepathy-salut 0.6.0-1 ii tomboy 1.8.0-1 ii totem-mozilla3.0.1-3 ii totem-plugins3.0.1-3 ii transmission-gtk 2.03-2.2 ii vinagre 3.2.1-1 ii xdg-user-dirs-gtk0.8-1 Versions of packages gnome recommends: ii browser-plugin-gnash 0.8.10~git20111001-1 ii gdebi0.8.2 ii gnome-games-extra-data 3.0.0-1 ii liferea 1.6.5-1.2+b1 ii menu-xdg 0.5 ii nautilus-sendto-empathy 3.2.1.1-1 ii telepathy-butterfly 0.5.15-2.1 ii telepathy-idle 0.1.11-2 Versions of packages gnome suggests: pn dia-gnome 0.97.1-9+b1 pn gnome-tweak-tool 3.0.4-2 pn gnucash pn libreoffice-evolution 1:3.4.4-1 pn libreoffice-gnome 1:3.4.4-1 pn planner Versions of packages gnome-core depends on: ii baobab 3.0.1-5 ii brasero 3.0.0-4 ii dconf-gsettings-backend 0.7.5-3 ii dconf-tools 0.7.5-3 ii empathy 3.2.1.1-1 ii eog 3.0.2-2 ii epiphany-browser3.0.4-1 ii evince 3.2.1-1 ii evolution-data-server 3.0.3-1 ii fonts-cantarell 0.0.6+git20110405-1 ii freedesktop-sound-theme 0.7.dfsg-1 ii gcalctool 6.2.0-1 ii gconf2 2.32.4-1 ii gdm33.0.4-4 ii glib-networking 2.28.7-2 ii gnome-backgrounds 3.2.0-1 ii gnome-bluetooth 3.2.1-1 ii gnome-control-center1:3.0.2-3 ii gnome-dictionary3.0.1-5 ii gnome-disk-utility 3.0.2-2 ii gnome-font-viewer 3.0.1-5 ii gnome-icon-theme3.2.1.2-1 ii gnome-icon-theme-extras 3.0.0-3 ii gnome-icon-theme-symbolic 3.2.1-1 ii gnome-keyring 3.0.3-2 ii gnome-menus 3.0.1-3 ii gnome-packagekit
Bug#643816: 2.7.2-6 still links to libncurses.so.5
reopen 643816 thanks After upgrading to 2.7.2-6, the issue is still there. $ ldd /usr/lib/python2.7/lib-dynload/_curses.so linux-vdso.so.1 => (0x7fff4d56e000) libncurses.so.5 => /lib/x86_64-linux-gnu/libncurses.so.5 (0x7f7107792000) libtinfo.so.5 => /lib/x86_64-linux-gnu/libtinfo.so.5 (0x7f710756a000) libpthread.so.0 => /lib/x86_64-linux-gnu/libpthread.so.0 (0x7f710734d000) libc.so.6 => /lib/x86_64-linux-gnu/libc.so.6 (0x7f7106fc9000) libdl.so.2 => /lib/x86_64-linux-gnu/libdl.so.2 (0x7f7106dc5000) /lib64/ld-linux-x86-64.so.2 (0x7f7107bf5000) $ zcat /usr/share/doc/python2.7/changelog.Debian.gz | head python2.7 (2.7.2-6) unstable; urgency=low * Update to 20111004, taken from the 2.7 branch. * Use the ncursesw include directory when linking with ncursesw. * Rebuild with libreadline not linked with libncurses*. Closes: #643816. * Fix typos in the multiprocessing module. Closes: #643856. -- Matthias Klose Tue, 04 Oct 2011 16:09:29 +0200 /Björn Påhlsson -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#644178: found the issue
If there is a file with a non-UTF-8 name in the parent directory where "bzr builddeb" is run, bzr-builddeb fails and exits. /Björn Påhlsson, or maybe Bjrn Phlsson, or whatever -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#644178: bzr-builddeb: UnicodeDecodeError
Package: bzr-builddeb Version: 2.7.9 Severity: important Dear Maintainer, When running "bzr builddeb" it raised a UnicodeDecodeError and failed to build anything. Using Squeeze version (2.7.9) of bzr-builddeb on same project resulted in no crash. Full log attached. /Björn -- System Information: Debian Release: wheezy/sid APT prefers oldstable APT policy: (500, 'oldstable'), (500, 'unstable'), (50, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 3.0.0-1-amd64 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages bzr-builddeb depends on: ii bzr2.4.1-1 ii devscripts 2.11.1 ii dpkg-dev 1.16.1 ii fakeroot 1.18.1-1 ii patchutils 0.3.2-1 ii pristine-tar 1.14 ii python 2.7.2-7 ii python-apt 0.8.0 ii python-debian 0.1.21 ii python2.6 2.6.7-4 ii python2.7 2.7.2-5 Versions of packages bzr-builddeb recommends: ii libalgorithm-merge-perl 0.08-2 ii python-launchpadlib 1.9.9-2 Versions of packages bzr-builddeb suggests: pn bzr-svn pn python-lzma -- no debconf informationBuilding using working tree Building package in split mode Looking for a way to retrieve the upstream tarball bzr: ERROR: exceptions.UnicodeDecodeError: 'ascii' codec can't decode byte 0xf6 in position 1: ordinal not in range(128) Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/bzrlib/commands.py", line 946, in exception_to_return_code return the_callable(*args, **kwargs) File "/usr/lib/python2.7/dist-packages/bzrlib/commands.py", line 1150, in run_bzr ret = run(*run_argv) File "/usr/lib/python2.7/dist-packages/bzrlib/commands.py", line 699, in run_argv_aliases return self.run(**all_cmd_args) File "/usr/lib/python2.7/dist-packages/bzrlib/commands.py", line 721, in run return self._operation.run_simple(*args, **kwargs) File "/usr/lib/python2.7/dist-packages/bzrlib/cleanup.py", line 135, in run_simple self.cleanups, self.func, *args, **kwargs) File "/usr/lib/python2.7/dist-packages/bzrlib/cleanup.py", line 165, in _do_with_cleanups result = func(*args, **kwargs) File "/usr/lib/python2.7/dist-packages/bzrlib/plugins/builddeb/cmds.py", line 427, in run builder.export() File "/usr/lib/python2.7/dist-packages/bzrlib/plugins/builddeb/builder.py", line 75, in export self.distiller.distill(self.target_dir) File "/usr/lib/python2.7/dist-packages/bzrlib/plugins/builddeb/source_distiller.py", line 79, in distill self._distill(target) File "/usr/lib/python2.7/dist-packages/bzrlib/plugins/builddeb/source_distiller.py", line 104, in _distill self.upstream_provider.provide(parent_dir) File "/usr/lib/python2.7/dist-packages/bzrlib/plugins/builddeb/upstream/__init__.py", line 433, in provide if self.already_exists_in_store() is None: File "/usr/lib/python2.7/dist-packages/bzrlib/plugins/builddeb/upstream/__init__.py", line 454, in already_exists_in_store return gather_orig_files(self.package, self.version, self.store_dir) File "/usr/lib/python2.7/dist-packages/bzrlib/plugins/builddeb/upstream/__init__.py", line 377, in gather_orig_files if filename.startswith(prefix): UnicodeDecodeError: 'ascii' codec can't decode byte 0xf6 in position 1: ordinal not in range(128) bzr 2.4.1 on python 2.7.2 (Linux-3.0.0-1-amd64-x86_64-with-debian-wheezy-sid) arguments: ['/usr/bin/bzr', 'builddeb'] plugins: bash_completion[2.4.1], builddeb[2.7.0dev], bzrtools[2.4.1], changelog_merge[2.4.1], dbus[0.1.0dev], gtk[0.101.0dev], launchpad[2.4.1], netrc_credential_store[2.4.1], news_merge[2.4.1], weave_fmt[2.4.1] encoding: 'UTF-8', fsenc: 'UTF-8', lang: 'en_US.UTF-8' *** Bazaar has encountered an internal error. This probably indicates a bug in Bazaar. You can help us fix it by filing a bug report at https://bugs.launchpad.net/bzr/+filebug including this traceback and a description of the problem.
Bug#638790: python-gnutls: gnutls.library.functions fails with libgnutls26-2.12.7-6
Package: python-gnutls Version: 1.2.0-2+b1 Justification: renders package unusable Severity: grave Tags: upstream *** Please type your report below this line *** python-gnutls 1.2.0-2+b1 seems wholly incompatible with libgnutls26-2.12.7-6. Steps to reproduce: python -c "import gnutls.library.functions" gives: Traceback (most recent call last): File "", line 1, in File "/usr/lib/pymodules/python2.6/gnutls/library/__init__.py", line 139, in from gnutls.library import errors File "/usr/lib/pymodules/python2.6/gnutls/library/errors.py", line 15, in from gnutls.library.functions import gnutls_strerror, gnutls_alert_get File "/usr/lib/pymodules/python2.6/gnutls/library/functions.py", line 1855, in gnutls_openpgp_privkey_sign_hash = libgnutls.gnutls_openpgp_privkey_sign_hash File "/usr/lib/python2.6/ctypes/__init__.py", line 366, in __getattr__ func = self.__getitem__(name) File "/usr/lib/python2.6/ctypes/__init__.py", line 371, in __getitem__ func = self._FuncPtr((name_or_ordinal, self)) AttributeError: /usr/lib/x86_64-linux-gnu/libgnutls.so.26: undefined symbol: gnutls_openpgp_privkey_sign_hash /Björn Påhlsson -- System Information: Debian Release: wheezy/sid APT prefers oldstable APT policy: (500, 'oldstable'), (500, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 3.0.0-1-amd64 (SMP w/2 CPU cores) Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages python-gnutls depends on: ii libc6 2.13-13Embedded GNU C Library: Shared lib ii libgnutls26 2.12.7-6 GNU TLS library - runtime library ii python2.6.7-2interactive high-level object-orie ii python-support1.0.14 automated rebuilding support for P Versions of packages python-gnutls recommends: ii python-twisted-core 11.0.0-2 Event-based framework for internet python-gnutls suggests no packages. -- no debconf information signature.asc Description: OpenPGP digital signature
Bug#616331: python-django: changed_data in django froms is undocumented
Package: python-django Version: 1.2.3-3+squeeze1 Severity: minor Would be nice if the Forms API page would mention it. -- System Information: Debian Release: 5.0.8 APT prefers oldstable-proposed-updates APT policy: (500, 'oldstable-proposed-updates'), (500, 'oldstable') Architecture: i386 (i686) Kernel: Linux 2.6.26-2-vserver-686 (SMP w/4 CPU cores) Locale: LANG=C, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages python-django depends on: ii python 2.5.2-3 An interactive high-level object-o ii python-support 1.0.3~bpo50+1 automated rebuilding support for P Versions of packages python-django recommends: ii libjs-jquery 1.2.6-2JavaScript library for dynamic web Versions of packages python-django suggests: ii python-flup 1.0-1 Implements Python Web Server Gatew ii python-mysqldb1.2.2-7A Python interface to MySQL pn python-psycopg (no description available) ii python-psycopg2 2.0.7-4Python module for PostgreSQL pn python-sqlite (no description available) pn python-yaml(no description available) -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#589413: mdadm: Segmentation fault when converting to RAID6 from RAID5
-BEGIN PGP SIGNED MESSAGE- Hash: RIPEMD160 On 07/22/2010 08:33 AM, Neil Brown wrote: >> on Debian, though I'm still running 2.6.32-5-amd64. I doubt that would >> make a difference, but it might. > > And if fact it does. I found a 2.6.34 kernel and hit the same bug. > > The mdadm bug is fixed by upstream commit > c03ef02d92e4b2a7397f7247ea5a25d932a1a889 > > It is triggered by a kernel bug that is fixed in upstream commit > a64c876fd357906a1f7193723866562ad290654c > (and many a few near by commits) which will be in 2.6.35, and is in > the latest 2.6.34-stable: 2.6.34.1. I can confirm that it works when running with linux-image-2.6.35-3c5-amd64 and mdadm 3.1.2-2. Thanks! /Björn -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.10 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEAREDAAYFAkxKFmUACgkQC+Cq+bUsy1JcsgCfbX2CSxvcXogwEuAbZvK8quiz QPUAnifzHjjZ7/AIEQT68zz6WKm399hs =C2x/ -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#589413: mdadm: Segmentation fault when converting to RAID6 from RAID5
Package: mdadm Version: 3.1.2-2 Severity: normal Assuming /dev/md0 is not used, the following commands can be used to reproduce a segmentation fault in the mdadm command: # for a in dev0 dev1 dev2 dev3; do dd if=/dev/zero count=256 bs=$((1024*1024)) of="$a"; done # for a in 0 1 2 3; do losetup /dev/loop$a dev$a; done # mdadm --create /dev/md0 --level=5 --raid-devices=3 /dev/loop0 /dev/loop1 /dev/loop2 # mkfs -t ext3 /dev/md0 # Just to make it sync # mdadm --verbose /dev/md0 --add /dev/loop3 # mdadm --verbose --grow /dev/md0 --level=raid6 --raid-devices=4 The output of that last command is: mdadm level of /dev/md0 changed to raid6 Segmentation fault And the contents of /proc/mdstat is: Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 : active raid6 loop3[4](S) loop2[3] loop1[1] loop0[0] 523264 blocks super 1.2 level 6, 512k chunk, algorithm 18 [4/3] [UUU_] unused devices: /Björn -- Package-specific info: --- mdadm.conf DEVICE partitions CREATE owner=root group=disk mode=0660 auto=yes HOMEHOST MAILADDR root --- /etc/default/mdadm INITRDSTART='all' AUTOSTART=true AUTOCHECK=true START_DAEMON=false DAEMON_OPTIONS="--syslog" VERBOSE=false --- /proc/mdstat: Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 : active raid6 loop3[4](S) loop2[3] loop1[1] loop0[0] 523264 blocks super 1.2 level 6, 512k chunk, algorithm 18 [4/3] [UUU_] unused devices: --- /proc/partitions: major minor #blocks name 80 117220824 sda 81 248976 sda1 82 1 sda2 85 97458291 sda5 86 248832 sda6 87 19262464 sda7 2540 97457263 dm-0 2541 95453184 dm-1 25422002944 dm-2 70 262144 loop0 71 262144 loop1 72 262144 loop2 73 262144 loop3 74 262144 loop4 90 523264 md0 --- LVM physical volumes: PV VG Fmt Attr PSize PFree /dev/dm-0 braxen lvm2 a- 92.94g0 --- mount output /dev/dm-1 on / type ext3 (rw,errors=remount-ro) tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=0755) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) udev on /dev type tmpfs (rw,mode=0755) tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=620) /dev/sda1 on /boot type ext2 (rw) overflow on /tmp type tmpfs (rw,size=1048576,mode=1777) fusectl on /sys/fs/fuse/connections type fusectl (rw) binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev) --- initrd.img-2.6.34-1-amd64: cpio: write error: No space left on device gzip: stdout: Broken pipe --- initrd's /conf/conf.d/md: no conf/md file. --- /proc/modules: dm_crypt 10736 1 - Live 0xa0268000 raid10 18553 0 - Live 0xa025d000 raid456 45132 1 - Live 0xa024a000 async_raid6_recov 5242 1 raid456, Live 0xa0243000 async_pq 3551 2 raid456,async_raid6_recov, Live 0xa023d000 raid6_pq 77179 2 async_raid6_recov,async_pq, Live 0xa0224000 async_xor 2550 3 raid456,async_raid6_recov,async_pq, Live 0xa021e000 async_memcpy 1206 2 raid456,async_raid6_recov, Live 0xa0211000 async_tx 1774 5 raid456,async_raid6_recov,async_pq,async_xor,async_memcpy, Live 0xa020b000 raid1 18769 0 - Live 0xa020 raid0 5541 0 - Live 0xa01f9000 multipath 6083 0 - Live 0xa01f2000 linear 3495 0 - Live 0xa01ec000 md_mod 78646 6 raid10,raid456,raid1,raid0,multipath,linear, Live 0xa01ce000 dm_mirror 11833 0 - Live 0xa01c5000 dm_region_hash 6816 1 dm_mirror, Live 0xa01bd000 dm_log 7693 2 dm_mirror,dm_region_hash, Live 0xa01b6000 dm_mod 55398 11 dm_crypt,dm_mirror,dm_log, Live 0xa019d000 --- /var/log/syslog: --- volume detail: /dev/sda is not recognised by mdadm. /dev/sda1 is not recognised by mdadm. /dev/sda2 is not recognised by mdadm. /dev/sda5 is not recognised by mdadm. /dev/sda6 is not recognised by mdadm. /dev/sda7 is not recognised by mdadm. --- /proc/cmdline BOOT_IMAGE=/vmlinuz-2.6.34-1-amd64 root=/dev/mapper/braxen-root ro quiet --- grub2: set root='(hd0,msdos1)' set root='(hd0,msdos1)' set root='(hd0,msdos1)' set root='(hd0,msdos1)' linux /vmlinuz-2.6.34-1-amd64 root=/dev/mapper/braxen-root ro quiet set root='(hd0,msdos1)' linux /vmlinuz-2.6.34-1-amd64 root=/dev/mapper/braxen-root ro single set root='(hd0,msdos1)' linux /vmlinuz-2.6.32-5-amd64 root=/dev/mapper/braxen-root ro quiet set root='(hd0,msdos1)' linux /vmlinuz-2.6.32-5-amd64 root=/dev/mapper/braxen-root ro single set root='(hd0,msdos1)' set root='(hd0,msdos1)' set root='(hd0,msdos1)' set root='(hd0,msdos1)' set root=(hd0,6) --- udev: ii udev 160-1 /
Bug#576854: mumble-server-web: valid email address characters are not supported (the + character)
Package: mumble-server-web Version: 1.1.4-4+lenny1 Severity: normal The valid mail check fails to recognize the + character as valid as a mail address. -- System Information: Debian Release: 5.0.4 APT prefers proposed-updates APT policy: (500, 'proposed-updates'), (500, 'stable') Architecture: i386 (i686) Kernel: Linux 2.6.26-2-vserver-686 (SMP w/4 CPU cores) Locale: LANG=C, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages mumble-server-web depends on: ii apache2 2.2.9-10+lenny6 Apache HTTP Server metapackage ii apache2-mpm-pre 2.2.9-10+lenny6 Apache HTTP Server - traditional n ii boa [httpd] 0.94.14rc21-3Lightweight and high performance w ii libcgi-session- 4.35-1 Persistent session data in CGI app ii libcompress-zli 2.012-1 Perl module for creation and manip ii libconfig-simpl 4.59-3 simple configuration file class ii libnet-dbus-per 0.33.6-1+b1 Extension for the DBus bindings ii libnet-dns-perl 0.63-2 Perform DNS queries from a Perl sc ii mumble-server 1.1.4-4+lenny1 Low latency VoIP server ii perl5.10.0-19lenny2 Larry Wall's Practical Extraction ii perlmagick 7:6.3.7.9.dfsg2-1~lenny3 Perl interface to the libMagick gr ii postfix [mail-t 2.5.5-1.1High-performance mail transport ag mumble-server-web recommends no packages. mumble-server-web suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#575589: Misspelling in rsyslog.conf(5)
Package: rsyslog Version: 4.6.1-1 Severity: minor In rsyslog.conf(5) man page, in the SELECTORS section it says: Rsyslogd has a syntax extension to the original BSD source, that makes its use more intuitively. You may precede every priority with an equation sign ('=') to specify only this single priority and not any of the above. It should say "equals sign ('=')". /Björn Påhlsson -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'stable'), (50, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-trunk-amd64 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages rsyslog depends on: ii libc6 2.10.2-6 Embedded GNU C Library: Shared lib ii lsb-base3.2-23 Linux Standard Base 3.2 init scrip ii zlib1g 1:1.2.3.4.dfsg-3 compression library - runtime Versions of packages rsyslog recommends: ii logrotate 3.7.8-5Log rotation utility Versions of packages rsyslog suggests: pn rsyslog-doc(no description available) pn rsyslog-gnutls (no description available) pn rsyslog-gssapi (no description available) pn rsyslog-mysql | rsyslog-pgsql (no description available) pn rsyslog-relp (no description available) -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#541880: obexd-server: Non-descripting description.
Package: obexd-server Version: 0.14-1 Severity: important The package description doesn't say what "Obex" is. -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.30-1-amd64 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#518010: iceweasel-torbutton: Recommended proxy settings is broken by default
-BEGIN PGP SIGNED MESSAGE- Hash: RIPEMD160 clone 518010 -1 reassign -1 iceweasel-torbutton 1.2.0-1 retitle -1 Should use "localhost" instead of "127.0.0.1". severity -1 wishlist stop > "localhost" should mean both 127.0.0.1 and ::1 on a dual-stack > system if the application support both IPv4 and IPv6. In that case, there is no reason to only use the IPv4 numeric form in the recommended configuration. Also, this would fix recommended settings for IPv6-only systems. /Belorn -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.9 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iEYEAREDAAYFAkmwE1sACgkQC+Cq+bUsy1K+EACgjQRwpZ9T7y1tZ7Bp/YykIVn9 sFEAn3NesZGJqTFNsaj842b33o6ONq97 =HswF -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#518006: silent failure from "invoke-rc.d privoxy start"
Roland Rosenfeld wrote: > Hi Björn! > > On Tue, 03 Mar 2009, Björn Påhlsson wrote: > >> If privoxy fails to start (at least when there are missing action >> files), then there is no indication from the start script used by >> invoke-rc.d, and invoke-rc.d doesnt return any error exit code. >> >> # invoke-rc.d privoxy start >> # echo $? >> 0 > > Very strange, it should at least output anything: > > # invoke-rc.d privoxy stop > Stopping filtering proxy server: privoxy. > > # mv /etc/privoxy/default.action /etc/privoxy/default.action.ignore > # invoke-rc.d privoxy start > Starting filtering proxy server: privoxy failed! More testing. Tested purging privoxy (aptitude purge privoxy) and then installing it again (aptitude install privoxy). then: # invoke-rc.d privoxy stop # mv /etc/privoxy/default.action /etc/privoxy/default.action.ignore # invoke-rc.d privoxy start # ps auxww | grep privoxy root 7077 0.0 0.032424 pts/0R+ 18:07 0:00 grep privoxy still no output, or running process. So I ran: # sh -x /etc/init.d/privoxy start > output 2>&1 So maybe it will help provide more information. after, it, I reverted the move, and tested that it still worked. # mv default.action.ignore default.action # invoke-rc.d privoxy start # ps auxww | grep privoxy privoxy 7100 0.0 0.0 21280 1292 ?Ss 18:10 0:00 /usr/sbin/privoxy --pidfile /var/run/privoxy.pid --user privoxy /etc/privoxy/config root 7102 0.0 0.0 6392 788 pts/0S+ 18:10 0:00 grep privoxy >> # /usr/sbin/privoxy >> Mar 03 14:40:09.675 7fde0d1096f0 Fatal error: can't check configuration file '//config': No such file or directory Yes, I noticed that I need to write /usr/sbin/privoxy --user privoxy /etc/privoxy/config to make it work. doing that with default.action as default.action.ignore doesnt produce any output but returns 1 as error return code. # privoxy --user privoxy /etc/privoxy/config # echo $? 1 # privoxy --no-daemon --user privoxy /etc/privoxy/config Mar 04 18:15:34.605 7f9cfebd76f0 Fatal error: can't load actions file '/etc/privoxy/default.action': No such file or directory. Note that beginning with Privoxy 3.0.7, actions files have to be specified with their complete file names. # echo $? 1 > Okay, the missing config file has to be written to stderr, because the > log file is configured in the config file. In contrast to this, the > missing action file is logged to /var/log/privoxy/logfile. But there > should be a message that privoxy is started. Maybe there exists some > problem with your lsb-base package, which is used in this version of > privoxy, but you seem to have installed the same version that I have > here. Yes, it was logged to the logfile. Mar 04 18:13:51.060 7f0fafe606f0 Fatal error: can't load actions file '/etc/privoxy/default.action': No such file or directory. Note that beginning with Privoxy 3.0.7, actions files have to be specified with their complete file names. no other text in the log. Im running lsb-base on version 3.2-20 (Debian unstable). If you need anything more let me know :). /Belorn + PATH=/sbin:/usr/sbin:/bin:/usr/bin + DESC='filtering proxy server' + NAME=privoxy + DAEMON=/usr/sbin/privoxy + PIDFILE=/var/run/privoxy.pid + OWNER=privoxy + CONFIGFILE=/etc/privoxy/config + DAEMON_ARGS='--pidfile /var/run/privoxy.pid --user privoxy /etc/privoxy/config' + SCRIPTNAME=/etc/init.d/privoxy + LOGDIR=/var/log/privoxy + DEFAULTSFILE=/etc/default/privoxy + '[' -x /usr/sbin/privoxy ']' + '[' -r /etc/default/privoxy ']' + '[' '!' -d /var/log/privoxy ']' + . /lib/init/vars.sh ++ '[' -f /etc/default/rcS ']' ++ . /etc/default/rcS +++ TMPTIME=0 +++ SULOGIN=no +++ DELAYLOGIN=no +++ UTC=yes +++ VERBOSE=no +++ FSCKFIX=no +++ RAMRUN=no +++ RAMLOCK=no ++ '[' -r /proc/cmdline ']' ++ grep -q ' noswap' /proc/cmdline ++ NOSWAP=no ++ '[' '!' -e /proc/cmdline ']' ++ egrep -qw quiet /proc/cmdline ++ '[' '' ']' ++ true + . /lib/lsb/init-functions ++ FANCYTTY= ++ '[' -e /etc/lsb-base-logging.sh ']' ++ true + case "$1" in + '[' '' = no ']' + '[' no '!=' no ']' + do_start + start-stop-daemon --start --quiet --pidfile /var/run/privoxy.pid --exec /usr/sbin/privoxy --test + start-stop-daemon --start --quiet --pidfile /var/run/privoxy.pid --exec /usr/sbin/privoxy -- --pidfile /var/run/privoxy.pid --user privoxy /etc/privoxy/config + return 2 + case "$?" in + '[' no '!=' no ']' + : signature.asc Description: OpenPGP digital signature
Bug#518013: iceweasel-torbutton: "Internal error" is too vague
Package: iceweasel-torbutton Version: 1.2.0-1 Severity: wishlist When pressing the "test settings" button, and there is no proxy listening on the configured address, it would be nice to receive a message indicating that, instead of "internal error" which directs the user's attention towards TOR and not the proxy. -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.26-1-amd64 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages iceweasel-torbutton depends on: ii iceweasel 3.0.6-1lightweight web browser based on M Versions of packages iceweasel-torbutton recommends: ii privoxy 3.0.11-1 Privacy enhancing HTTP Proxy ii tor 0.2.0.34-1 anonymizing overlay network for TC iceweasel-torbutton suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#518012: privoxy: FAQ, documentation mistake, section 3.4
Package: privoxy Version: 3.0.11-1 Severity: minor In file /usr/share/doc/privoxy/faq/configuration.html, section 3.4, "Three actions files" should be "Two actions files". -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.26-1-amd64 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages privoxy depends on: ii adduser3.110 add and remove users and groups ii libc6 2.9-4 GNU C Library: Shared libraries ii libpcre3 7.8-2 Perl 5 Compatible Regular Expressi ii logrotate 3.7.7-3 Log rotation utility ii lsb-base 3.2-20Linux Standard Base 3.2 init scrip ii perl 5.10.0-19 Larry Wall's Practical Extraction ii zlib1g 1:1.2.3.3.dfsg-13 compression library - runtime Versions of packages privoxy recommends: ii doc-base 0.9.1 utilities to manage online documen privoxy suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#518010: iceweasel-torbutton: Recommended proxy settings is broken by default
Package: iceweasel-torbutton Version: 1.2.0-1 Severity: important Default recommended proxy is set to 127.0.0.1:8118, while privoxy by default listens to localhost:8118. These are not the same, and if kernel has IPv6 loaded, then privoxy will ONLY listen to [::1]:8118, and NOT 127.0.0.1:8118, thus breaking the tor button. -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.26-1-amd64 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages iceweasel-torbutton depends on: ii iceweasel 3.0.6-1lightweight web browser based on M Versions of packages iceweasel-torbutton recommends: ii privoxy 3.0.11-1 Privacy enhancing HTTP Proxy ii tor 0.2.0.34-1 anonymizing overlay network for TC iceweasel-torbutton suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#518006: silent failure from "invoke-rc.d privoxy start"
Package: privoxy Version: 3.0.11-1 Severity: minor If privoxy fails to start (at least when there are missing action files), then there is no indication from the start script used by invoke-rc.d, and invoke-rc.d doesnt return any error exit code. # invoke-rc.d privoxy start # echo $? 0 # ps auxww | grep privoxy root 22347 0.0 0.0 6392 788 pts/5R+ 14:38 0:00 grep privoxy # /usr/sbin/privoxy Mar 03 14:40:09.675 7fde0d1096f0 Fatal error: can't check configuration file '//config': No such file or directory # echo $? 1 # As indicated above, manually running the program returns both an error code and an error message. -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.26-1-amd64 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages privoxy depends on: ii adduser3.110 add and remove users and groups ii libc6 2.9-4 GNU C Library: Shared libraries ii libpcre3 7.8-2 Perl 5 Compatible Regular Expressi ii logrotate 3.7.7-3 Log rotation utility ii lsb-base 3.2-20Linux Standard Base 3.2 init scrip ii perl 5.10.0-19 Larry Wall's Practical Extraction ii zlib1g 1:1.2.3.3.dfsg-13 compression library - runtime Versions of packages privoxy recommends: ii doc-base 0.9.1 utilities to manage online documen privoxy suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#500727: ITP: mandos -- Do unattended reboots with an encrypted root file system
Package: wnpp Severity: wishlist Owner: "Björn Påhlsson" <[EMAIL PROTECTED]> * Package name: mandos Version : 1.0 Upstream Author : Björn Påhlsson <[EMAIL PROTECTED]>, Teddy Hogeborn <[EMAIL PROTECTED]> * URL : http://www.fukt.bsnet.se/mandos * License : GPL3+ Programming Lang: C, Python Description : Do unattended reboots with an encrypted root file system This is the Mandos system, which allows computers to have encrypted root file systems and at the same time be capable of remote and/or unattended reboots. The computers run a small client program in the initial RAM disk environment which will communicate with a server over a network. All network communication is encrypted using TLS. The clients are identified by the server using an OpenPGP key; each client has one unique to it. The server sends the clients an encrypted password. The encrypted password is decrypted by the clients using the same OpenPGP key, and the password is then used to unlock the root file system, whereupon the computers can continue booting normally. -- System Information: Debian Release: lenny/sid APT prefers testing-proposed-updates APT policy: (500, 'testing-proposed-updates'), (500, 'testing') Architecture: i386 (i686) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]