package: linux-2.6
version: 2.6.18-7
severity: serious
Hi,
grabbing video from a machine with the attached configuration doesnt work with
the kernel currently in etch.
videoetch:~# dvgrab --size 0 --format qt foo
"" 0.00 MB 0 frames
Capture Stopped
Error: no DV
Sarge works fine.
regards,
Holger
Linux version 2.6.18-3-686 (Debian 2.6.18-7) ([EMAIL PROTECTED]) (gcc version
4.1.2 20061115 (prerelease) (Debian 4.1.1-20)) #1 SMP Mon Dec 4 16:41:14 UTC
2006
BIOS-provided physical RAM map:
BIOS-e820: - 0009f800 (usable)
BIOS-e820: 0009f800 - 000a (reserved)
BIOS-e820: 000e - 0010 (reserved)
BIOS-e820: 0010 - 1ff7 (usable)
BIOS-e820: 1ff7 - 1ff7a000 (ACPI data)
BIOS-e820: 1ff7a000 - 1ff8 (ACPI NVS)
BIOS-e820: 1ff8 - 2000 (reserved)
BIOS-e820: fec0 - fec1 (reserved)
BIOS-e820: fee0 - fee01000 (reserved)
BIOS-e820: ff80 - 0001 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
found SMP MP-table at 000f64f0
On node 0 totalpages: 130928
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 126832 pages, LIFO batch:31
DMI present.
ACPI: RSDP (v000 PTLTD ) @ 0x000f65b0
ACPI: RSDT (v001 PTLTDRSDT 0x060400d0 LTP 0x) @ 0x1ff75110
ACPI: FADT (v001 IBMTHINKCEN 0x060400d0 PTL 0x0001) @ 0x1ff79ee2
ACPI: TCPA (v001 IBMTHINKCEN 0x060400d0 PTL 0x0001) @ 0x1ff79f56
ACPI: MADT (v001 PTLTD APIC 0x060400d0 LTP 0x) @ 0x1ff79f88
ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x060400d0 LTP 0x0001) @ 0x1ff79fd8
ACPI: DSDT (v001IBM THINKCEN 0x060400d0 MSFT 0x010e) @ 0x
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee0
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:2 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec0] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec0, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 3000 (gap: 2000:dec0)
Detected 2800.257 MHz processor.
Built 1 zonelists. Total pages: 130928
Kernel command line: root=/dev/mapper/videoetch-root ro
mapped APIC to d000 (fee0)
mapped IOAPIC to c000 (fec0)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 510776k/523712k available (1543k kernel code, 12328k reserved, 574k
data, 196k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 5604.74 BogoMIPS (lpj=11209495)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 4400
CPU: After vendor identify, caps: bfebfbff 4400
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Hyper-Threading is disabled
CPU: After all inits, caps: bfebfbff 0080 4400
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
Compat vDSO mapped to e000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 16k freed
ACPI: Core revision 20060707
CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09
Total of 1 processors activated (5604.74 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
Brought up 1 CPUs
migration_cost=0
checking if image is initramfs... it is
Freeing initrd memory: 5158k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd98d, last bus=3
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 1180-11bf claimed by ICH4 GPIO
PCI: Ignoring BAR0-3 of IDE controller :00:1f.1
Boot video device is :01:00.0
PCI: Firmware