Bug#609538: r8169: long delay during resume

2011-01-10 Thread Jarek Kamiński 
W dniu 11.01.2011 06:49, Ben Hutchings pisze:
> On Mon, 2011-01-10 at 14:14 +0100, Jarek Kamiński wrote:
>> Package: linux-2.6
>> Version: 2.6.37-1~experimental.1

>> 2.6.37 introduces regression in r8169. During every resume I get ~20
>> seconds delay:
>> Jan 10 13:57:15 rocket kernel: [36458.257780] ata1.00: configured for 
>> UDMA/100
>> Jan 10 13:57:15 rocket kernel: [36517.738421] r8169 :13:00.0: eth0: 
>> unable to apply firmware patch
>> Jan 10 13:57:15 rocket kernel: [36517.739859] PM: resume of devices complete 
>> after 61177.644 msecs
>> Jan 10 13:57:15 rocket kernel: [36517.740258] PM: Finishing wakeup.
>> Jan 10 13:57:15 rocket kernel: [36517.740259] Restarting tasks ... done.
>>
>> Bisecting leads to commit bca03d5f32c8ee9b5cfa1d32640a63fded6cb3c0
>> (r8169: remove the firmware of RTL8111D.).

>> Either r8169 tries to load firmware too early, or it should keep it
>> loaded in memory for use during resume.
> 
> It should.  But an earlier version of this patch was also in Debian's
> 2.6.36 so it would have had the same problem.

The last 2.6.36 I've tried was 2.6.36-1~experimental.1, I've then
passsed and returned to 2.6.32 for unrelated problems. I think it wasn't
affected, but I can re-check it and/or test later 2.6.36 versions if it
may help.

Sorry if my information was misleading.


-- 
pozdr(); // Jarek



--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/4d2c06cf.4090...@vilo.eu.org

Bug#609638: closed by Ben Hutchings (Re: Bug#609638: Please, include p4-clockmod on linux-image)

2011-01-10 Thread Rogério Brito 
reopen 609638
thanks

Hey, not so fast closing it, Ben.

On Jan 11 2011, Debian Bug Tracking System wrote:
> On Tue, 2011-01-11 at 03:31 -0200, Rogério Brito wrote:
> > Please, include p4-clockmod in the linux-image kernels provided by
> > Debian. Otherwise, some people may not have any kind of frequency
> > control.
> [...]
> 
> Sorry, no.  It's not useful for dynamic CPU frequency scaling

Without it, I don't have *any* way of using any kind of frequency scaling
(not just dynamic). I can't do anything, be it dynamic, manual, whatever.

Furthermore, with the module, one can use powernowd for the dynamic
frequency scaling.

> and is strongly deprecated.

Is there anything wrong with providing a module? If/when it happens to be
removed, just don't provide it anymore.

Ideally, the module shouldn't be needed, but the situation is far from
ideal, because hardware is frequently, broken.

Let me just emphasize that the problem here is not a governor or something
that can be alternatively used: without it, not governor, etc can be used.


Thanks,

-- 
Rogério Brito : rbr...@{ime.usp.br,gmail.com} : GPG key 4096R/BCFC
http://rb.doesntexist.org : Packages for LaTeX : algorithms.berlios.de
DebianQA: http://qa.debian.org/developer.php?login=rbrito%40ime.usp.br



--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/20110111072513.ga25...@ime.usp.br

Processed: Re: Bug#609638 closed by Ben Hutchings (Re: Bug#609638: Please, include p4-clockmod on linux-image)

2011-01-10 Thread Debian Bug Tracking System 
Processing commands for cont...@bugs.debian.org:

> reopen 609638
Bug #609638 {Done: Ben Hutchings } [linux-2.6] Please, 
include p4-clockmod on linux-image
> thanks
Stopping processing here.

Please contact me if you need assistance.
-- 
609638: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=609638
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems


-- 
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/handler.s.c.1294730739342.transcr...@bugs.debian.org

Bug#609638: marked as done (Please, include p4-clockmod on linux-image)

2011-01-10 Thread Debian Bug Tracking System 
Your message dated Tue, 11 Jan 2011 05:58:23 +
with message-id <1294725503.3235.4.ca...@localhost>
and subject line Re: Bug#609638: Please, include p4-clockmod on linux-image
has caused the Debian Bug report #609638,
regarding Please, include p4-clockmod on linux-image
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)


-- 
609638: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=609638
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
--- Begin Message ---
Package: linux-2.6
Severity: wishlist

Please, include p4-clockmod in the linux-image kernels provided by
Debian. Otherwise, some people may not have any kind of frequency
control.

In my particular case, I use a Pentium D 805 (with arch amd64), which does
not work with acpi-cpufreq, but only with p4-clockmod. This should, in
principle, be only a matter of setting it to be compiled, say, as a module:

,
| rbr...@chagas:/tmp$ grep P4_CLOCKMOD /boot/config-2.6.37-trunk-amd64 
| # CONFIG_X86_P4_CLOCKMOD is not set
| rbr...@chagas:/tmp$ 
`


Thanks, Rogério Brito.

-- 
Rogério Brito : rbr...@{ime.usp.br,gmail.com} : GPG key 4096R/BCFC
http://rb.doesntexist.org : Packages for LaTeX : algorithms.berlios.de
DebianQA: http://qa.debian.org/developer.php?login=rbrito%40ime.usp.br


--- End Message ---
--- Begin Message ---
On Tue, 2011-01-11 at 03:31 -0200, Rogério Brito wrote:
> Package: linux-2.6
> Severity: wishlist
> 
> Please, include p4-clockmod in the linux-image kernels provided by
> Debian. Otherwise, some people may not have any kind of frequency
> control.
> 
> In my particular case, I use a Pentium D 805 (with arch amd64), which does
> not work with acpi-cpufreq, but only with p4-clockmod. This should, in
> principle, be only a matter of setting it to be compiled, say, as a module:
[...]

Sorry, no.  It's not useful for dynamic CPU frequency scaling and is
strongly deprecated.

Ben.

-- 
Ben Hutchings
Once a job is fouled up, anything done to improve it makes it worse.


signature.asc
Description: This is a digitally signed message part
--- End Message ---

Bug#609538: r8169: long delay during resume

2011-01-10 Thread Ben Hutchings 
On Mon, 2011-01-10 at 14:14 +0100, Jarek Kamiński wrote:
> Package: linux-2.6
> Version: 2.6.37-1~experimental.1
> Severity: normal
> File: /lib/modules/2.6.37-trunk-amd64/kernel/drivers/net/r8169.ko
> Tags: upstream
> 
> Hi.
> 
> 2.6.37 introduces regression in r8169. During every resume I get ~20
> seconds delay:
> Jan 10 13:57:15 rocket kernel: [36458.257780] ata1.00: configured for UDMA/100
> Jan 10 13:57:15 rocket kernel: [36517.738421] r8169 :13:00.0: eth0: 
> unable to apply firmware patch
> Jan 10 13:57:15 rocket kernel: [36517.739859] PM: resume of devices complete 
> after 61177.644 msecs
> Jan 10 13:57:15 rocket kernel: [36517.740258] PM: Finishing wakeup.
> Jan 10 13:57:15 rocket kernel: [36517.740259] Restarting tasks ... done.
> 
> Bisecting leads to commit bca03d5f32c8ee9b5cfa1d32640a63fded6cb3c0
> (r8169: remove the firmware of RTL8111D.). Further debugging showed,
> that firmware.agent is not called at all, I guess that udev is not
> working before "Restarting tasks".

Right, only the kernel is running then.

> Either r8169 tries to load firmware too early, or it should keep it
> loaded in memory for use during resume.

It should.  But an earlier version of this patch was also in Debian's
2.6.36 so it would have had the same problem.

Ben.

> The problem persist no matter if I have firmware-realtek installed, or
> not.

-- 
Ben Hutchings
Once a job is fouled up, anything done to improve it makes it worse.


signature.asc
Description: This is a digitally signed message part

Bug#609638: Please, include p4-clockmod on linux-image

2011-01-10 Thread Rogério Brito 
Package: linux-2.6
Severity: wishlist

Please, include p4-clockmod in the linux-image kernels provided by
Debian. Otherwise, some people may not have any kind of frequency
control.

In my particular case, I use a Pentium D 805 (with arch amd64), which does
not work with acpi-cpufreq, but only with p4-clockmod. This should, in
principle, be only a matter of setting it to be compiled, say, as a module:

,
| rbr...@chagas:/tmp$ grep P4_CLOCKMOD /boot/config-2.6.37-trunk-amd64 
| # CONFIG_X86_P4_CLOCKMOD is not set
| rbr...@chagas:/tmp$ 
`


Thanks, Rogério Brito.

-- 
Rogério Brito : rbr...@{ime.usp.br,gmail.com} : GPG key 4096R/BCFC
http://rb.doesntexist.org : Packages for LaTeX : algorithms.berlios.de
DebianQA: http://qa.debian.org/developer.php?login=rbrito%40ime.usp.br



--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/20110111053142.ga20...@ime.usp.br

Bug#609615: linux-2.6: please do not build in nvidiafb on powerpc systems

2011-01-10 Thread Ben Hutchings 
On Tue, 2011-01-11 at 02:58 +0100, Julien Cristau wrote:
> On Tue, Jan 11, 2011 at 01:53:53 +, Ben Hutchings wrote:
> 
> > On Mon, 2011-01-10 at 22:58 +, Daniel Kahn Gillmor wrote:
> > > Package: linux-2.6
> > > Severity: normal
> > > 
> > > in http://bugs.debian.org/608846 , i encountered difficulties with an
> > > NVIDIA chipset on powerpc.  
> > > 
> > > These difficulties appear to be exacerbated by the fact that debian's
> > > powerpc kernel has set
> > > 
> > > CONFIG_FB_NVIDIA=y
> > > 
> > > Please set this option to 'm' for powerpc (this course of action was
> > > suggested by jcristau on #debian-x, who helped me find a workaround to
> > > the earlier problem).
> > > 
> > > Thanks for maintaining the Linux kernel in debian,
> > 
> > As I understand it, we cannot rely on VGA text-mode or a common firmware
> > interface as a basis for the console on PowerPC.  This means we must
> > have a suitable framebuffer driver loaded even before loading the
> > initramfs, so most such drivers are built-in.
> > 
> offb should work,
[...]

On a PowerMac, yes, but I thought the PowerPC port supported PReP and
CHRP machines too.  Perhaps we should have offb and vga16fb built-in,
and that would cover them all?

Ben.

-- 
Ben Hutchings
Once a job is fouled up, anything done to improve it makes it worse.


signature.asc
Description: This is a digitally signed message part

Bug#609615: linux-2.6: please do not build in nvidiafb on powerpc systems

2011-01-10 Thread Julien Cristau 
On Tue, Jan 11, 2011 at 01:53:53 +, Ben Hutchings wrote:

> On Mon, 2011-01-10 at 22:58 +, Daniel Kahn Gillmor wrote:
> > Package: linux-2.6
> > Severity: normal
> > 
> > in http://bugs.debian.org/608846 , i encountered difficulties with an
> > NVIDIA chipset on powerpc.  
> > 
> > These difficulties appear to be exacerbated by the fact that debian's
> > powerpc kernel has set
> > 
> > CONFIG_FB_NVIDIA=y
> > 
> > Please set this option to 'm' for powerpc (this course of action was
> > suggested by jcristau on #debian-x, who helped me find a workaround to
> > the earlier problem).
> > 
> > Thanks for maintaining the Linux kernel in debian,
> 
> As I understand it, we cannot rely on VGA text-mode or a common firmware
> interface as a basis for the console on PowerPC.  This means we must
> have a suitable framebuffer driver loaded even before loading the
> initramfs, so most such drivers are built-in.
> 
offb should work, and framebuffer handoff between such a driver and a
kms driver works (or can be made to work); and indeed dkg managed to get
nouveau kms going after turning off nvidiafb on .37.  At boot fbcon is
on offb, when udev starts it switches to nouveau.  That handoff doesn't
work for hw drivers like nvidiafb or radeonfb, it's restricted to
generic ones such as efifb/offb/vesafb/vga16fb.

Cheers,
Julien


signature.asc
Description: Digital signature

Bug#609615: linux-2.6: please do not build in nvidiafb on powerpc systems

2011-01-10 Thread Ben Hutchings 
On Mon, 2011-01-10 at 22:58 +, Daniel Kahn Gillmor wrote:
> Package: linux-2.6
> Severity: normal
> 
> in http://bugs.debian.org/608846 , i encountered difficulties with an
> NVIDIA chipset on powerpc.  
> 
> These difficulties appear to be exacerbated by the fact that debian's
> powerpc kernel has set
> 
> CONFIG_FB_NVIDIA=y
> 
> Please set this option to 'm' for powerpc (this course of action was
> suggested by jcristau on #debian-x, who helped me find a workaround to
> the earlier problem).
> 
> Thanks for maintaining the Linux kernel in debian,

As I understand it, we cannot rely on VGA text-mode or a common firmware
interface as a basis for the console on PowerPC.  This means we must
have a suitable framebuffer driver loaded even before loading the
initramfs, so most such drivers are built-in.

There may be a better way to do this, but unfortunately the kernel team
is currently lacking a PowerPC porter who could make an informed
decision.

Ben.

-- 
Ben Hutchings
Once a job is fouled up, anything done to improve it makes it worse.


signature.asc
Description: This is a digitally signed message part

Bug#609615: linux-2.6: please do not build in nvidiafb on powerpc systems

2011-01-10 Thread Daniel Kahn Gillmor 
Package: linux-2.6
Severity: normal

in http://bugs.debian.org/608846 , i encountered difficulties with an
NVIDIA chipset on powerpc.  

These difficulties appear to be exacerbated by the fact that debian's
powerpc kernel has set

CONFIG_FB_NVIDIA=y

Please set this option to 'm' for powerpc (this course of action was
suggested by jcristau on #debian-x, who helped me find a workaround to
the earlier problem).

Thanks for maintaining the Linux kernel in debian,

   --dkg

-- System Information:
Debian Release: 6.0
  APT prefers testing
  APT policy: (500, 'testing'), (1, 'experimental')
Architecture: powerpc (ppc)

Kernel: Linux 2.6.37-trunk-powerpc
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash



-- 
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/20110110225807.12628.9397.report...@bagheera.jrec.urbanacademy.org

Bug#597658: linux-headers-2.6.32-5-amd64: Missing aesni-intel module in kernel

2011-01-10 Thread dann frazier 
On Mon, Jan 03, 2011 at 08:29:02PM +, Ben Hutchings wrote:
> On Mon, 2011-01-03 at 10:12 -0700, dann frazier wrote:
> > On Mon, Jan 03, 2011 at 05:05:32AM +, Ben Hutchings wrote:
> > > On Sun, 2011-01-02 at 21:30 -0700, dann frazier wrote:
> > > > On Sun, Jan 02, 2011 at 08:57:19PM +, Ben Hutchings wrote:
> > > [...]
> > > > > Please can you test whether aesni-intel loads and works in:
> > > > > 
> > > > > 1. Package version 2.6.32-12
> > > > > .  This was 
> > > > > the
> > > > > last version with aesni-intel included.
> > > > > 
> > > > > 2. Package version 2.6.32-29, modified to reenable aesni-intel.  See 
> > > > > the
> > > > > instructions at
> > > > > .
> > > > > a. Follow section 4.2.1.
> > > > > b. Change '# CONFIG_CRYPTO_AES_NI_INTEL is not set' to
> > > > >'CONFIG_CRYPTO_AES_NI_INTEL=m' in
> > > > >debian/config/kernelarch-x86/config-arch-64.
> > > > > c. Follow section 4.2.4.
> > > > 
> > > > fyi, 2.6.32-12 & 2.6.32-29 w/ CONFIG_CRYPTO_AES_NI_INTEL=m both boot
> > > > successfully w/ the aesni_intel module on my Lenovo T410.
> > > 
> > > I'm guessing you don't have an AES-encrypted hard drive though...
> > 
> > I do:
> > 
> > $ sudo cryptsetup status sda5_crypt 
> > /dev/mapper/sda5_crypt is active:
> >   cipher:  aes-cbc-essiv:sha256
> > [...]
> > 
> > Though I don't know how to verify that the hardware implementation is
> > actually being used.
> 
> I think that trying to remove the module is a valid test.

Finally found a convenient time to reboot; in both cases (-12 & -29 +
the module) the module is unremovable on my system.

-dann



-- 
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/20110110203956.ga2...@dannf.org

Processed: Re: Processed: Re: oops and panic after hardware detection

2011-01-10 Thread Debian Bug Tracking System 
Processing commands for cont...@bugs.debian.org:

> retitle 607906 BUGs and panic after modprobe mptspi
Bug #607906 [linux-2.6] debian-installer: oops and panic after hardware 
detection
Changed Bug title to 'BUGs and panic after modprobe mptspi' from 
'debian-installer: oops and panic after hardware detection'
>
End of message, stopping processing here.

Please contact me if you need assistance.
-- 
607906: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=607906
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems


-- 
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/handler.s.c.129469053211372.transcr...@bugs.debian.org

Processed: Re: oops and panic after hardware detection

2011-01-10 Thread Debian Bug Tracking System 
Processing commands for cont...@bugs.debian.org:

> reassign 607906 linux-2.6
Bug #607906 [debian-installer] debian-installer: oops and panic after hardware 
detection
Bug reassigned from package 'debian-installer' to 'linux-2.6'.
> thanks
Stopping processing here.

Please contact me if you need assistance.
-- 
607906: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=607906
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems


-- 
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/handler.s.c.12946899729092.transcr...@bugs.debian.org

Bug#602450: directory does not match with driver needs

2011-01-10 Thread mourad 
Package: firmware-realtek
Version: 0.28
Severity: normal

Hi,

The lastest version solved only partially the problem.

The driver is looking for the firmware in the rtl8712u firmware directory and
not in rtlwifi as created by 0.28 package...

As a temporary workaround, I made a symbolic link between rtlwifi and rtl8712u
and it does the trick...

I think that mean to patch the 2.6.37 trunk kernel or to change the path to the
firmware...

Best regards



-- System Information:
Debian Release: 6.0
  APT prefers testing
  APT policy: (990, 'testing'), (500, 'unstable'), (500, 'stable'), (1, 
'experimental')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.37-trunk-amd64 (SMP w/4 CPU cores)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

firmware-realtek depends on no packages.

firmware-realtek recommends no packages.

Versions of packages firmware-realtek suggests:
ii  initramfs-tools  0.98.7  tools for generating an initramfs
ii  linux-image-2.6. 2.6.32-11   Linux 2.6.32 for 64-bit PCs
ii  linux-image-2.6. 2.6.34-1~experimental.2 Linux 2.6.34 for 64-bit PCs
ii  linux-image-2.6. 2.6.36-1~experimental.1 Linux 2.6.36 for 64-bit PCs
ii  linux-image-2.6. 2.6.37-1~experimental.1 Linux 2.6.37 for 64-bit PCs

-- no debconf information



-- 
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/20110110183129.27529.7611.report...@hammer-head

Bug#609538: r8169: long delay during resume

2011-01-10 Thread Jarek Kamiński 
Package: linux-2.6
Version: 2.6.37-1~experimental.1
Severity: normal
File: /lib/modules/2.6.37-trunk-amd64/kernel/drivers/net/r8169.ko
Tags: upstream

Hi.

2.6.37 introduces regression in r8169. During every resume I get ~20
seconds delay:
Jan 10 13:57:15 rocket kernel: [36458.257780] ata1.00: configured for UDMA/100
Jan 10 13:57:15 rocket kernel: [36517.738421] r8169 :13:00.0: eth0: unable 
to apply firmware patch
Jan 10 13:57:15 rocket kernel: [36517.739859] PM: resume of devices complete 
after 61177.644 msecs
Jan 10 13:57:15 rocket kernel: [36517.740258] PM: Finishing wakeup.
Jan 10 13:57:15 rocket kernel: [36517.740259] Restarting tasks ... done.

Bisecting leads to commit bca03d5f32c8ee9b5cfa1d32640a63fded6cb3c0
(r8169: remove the firmware of RTL8111D.). Further debugging showed,
that firmware.agent is not called at all, I guess that udev is not
working before "Restarting tasks".

Either r8169 tries to load firmware too early, or it should keep it
loaded in memory for use during resume.

The problem persist no matter if I have firmware-realtek installed, or
not.

Cheers,
Jarek.



-- Package-specific info:
** Version:
Linux version 2.6.37-trunk-amd64 (Debian 2.6.37-1~experimental.1) 
(b...@decadent.org.uk) (gcc version 4.4.5 (Debian 4.4.5-10) ) #1 SMP Thu Jan 6 
16:00:31 UTC 2011

** Command line:
BOOT_IMAGE=/vmlinuz-2.6.37-trunk-amd64 root=/dev/mapper/vg0-root ro 
resume=/dev/mapper/vg0-swap0 rootfstype=ext4 splash

** Tainted: P (1)
 * Proprietary module has been loaded.

** Kernel log:
[36519.156777] ata1: EH complete
[36519.334872] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[36519.334921] ehci_hcd :00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[36519.334971] ehci_hcd :00:1a.0: setting latency timer to 64
[36519.334978] ehci_hcd :00:1a.0: EHCI Host Controller
[36519.335024] ehci_hcd :00:1a.0: new USB bus registered, assigned bus 
number 1
[36519.347401] ehci_hcd :00:1a.0: debug port 2
[36519.351384] ehci_hcd :00:1a.0: cache line size of 64 is not supported
[36519.351410] ehci_hcd :00:1a.0: irq 16, io mem 0xfbc08000
[36519.367269] ehci_hcd :00:1a.0: USB 2.0 started, EHCI 1.00
[36519.367308] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[36519.367312] usb usb1: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[36519.367317] usb usb1: Product: EHCI Host Controller
[36519.367320] usb usb1: Manufacturer: Linux 2.6.37-trunk-amd64 ehci_hcd
[36519.367324] usb usb1: SerialNumber: :00:1a.0
[36519.367544] hub 1-0:1.0: USB hub found
[36519.367554] hub 1-0:1.0: 2 ports detected
[36519.367720] ehci_hcd :00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[36519.367796] ehci_hcd :00:1d.0: setting latency timer to 64
[36519.367803] ehci_hcd :00:1d.0: EHCI Host Controller
[36519.367894] ehci_hcd :00:1d.0: new USB bus registered, assigned bus 
number 2
[36519.387275] ehci_hcd :00:1d.0: debug port 2
[36519.391258] ehci_hcd :00:1d.0: cache line size of 64 is not supported
[36519.391359] ehci_hcd :00:1d.0: irq 23, io mem 0xfbc07000
[36519.407191] ehci_hcd :00:1d.0: USB 2.0 started, EHCI 1.00
[36519.407224] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[36519.407227] usb usb2: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[36519.407230] usb usb2: Product: EHCI Host Controller
[36519.407232] usb usb2: Manufacturer: Linux 2.6.37-trunk-amd64 ehci_hcd
[36519.407234] usb usb2: SerialNumber: :00:1d.0
[36519.407979] hub 2-0:1.0: USB hub found
[36519.407987] hub 2-0:1.0: 2 ports detected
[36519.422831] Linux video capture interface: v2.00
[36519.429307] usbcore: registered new interface driver uvcvideo
[36519.429311] USB Video Class driver (v1.0.0)
[36519.451382] r8169 :13:00.0: eth0: link down
[36519.451795] ADDRCONF(NETDEV_UP): eth0: link is not ready
[36519.678749] usb 1-1: new high speed USB device using ehci_hcd and address 2
[36519.811173] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[36519.811179] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[36519.811474] hub 1-1:1.0: USB hub found
[36519.811669] hub 1-1:1.0: 6 ports detected
[36519.922265] usb 2-1: new high speed USB device using ehci_hcd and address 2
[36520.054400] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[36520.054403] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[36520.054675] hub 2-1:1.0: USB hub found
[36520.055146] hub 2-1:1.0: 8 ports detected
[36520.126005] usb 1-1.1: new full speed USB device using ehci_hcd and address 3
[36520.219447] usb 1-1.1: New USB device found, idVendor=0a5c, idProduct=4500
[36520.219454] usb 1-1.1: New USB device strings: Mfr=1, Product=2, 
SerialNumber=0
[36520.219458] usb 1-1.1: Product: BCM2046B1
[36520.219462] usb 1-1.1: Manufacturer: Broadcom
[36520.220297] hub 1-1.1:1.0: USB hub found
[36520.220432] hub 1-1.1:1.0: 3 ports detected
[36520.293675] usb 1-1.2: new high speed USB device using ehci_hcd an

Processed: found 595033 2.6.37-1~experimental.1

2011-01-10 Thread Debian Bug Tracking System 
Processing commands for cont...@bugs.debian.org:

> found 595033 2.6.37-1~experimental.1
Bug #595033 [linux-2.6] xserver-xorg-video-ati: Only one display works at a 
time with RV620 [FirePro 2260] with two DisplayPort output
There is no source info for the package 'linux-2.6' at version 
'2.6.37-1~experimental.1' with architecture ''
Unable to make a source version for version '2.6.37-1~experimental.1'
Bug Marked as found in versions 2.6.37-1~experimental.1.
> thanks
Stopping processing here.

Please contact me if you need assistance.
-- 
595033: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=595033
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems


-- 
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/handler.s.c.129466520014348.transcr...@bugs.debian.org

Bug#595033: xserver-xorg-video-ati: Only one display works at a time with RV620 [FirePro 2260] with two DisplayPort output

2011-01-10 Thread Thomas PIERSON 
Hi,

This bug was fixed in the package 'linux-image-2.6.36-trunk-amd64'.

But I just install the package 'linux-image-2.6.37-trunk-amd64' and this issue 
about dual 'DisplayPort' happened again. 
Maybe there is a regression in this new kernel release?

Do you need any logs file?

Best regards,
Thomas PIERSON


signature.asc
Description: This is a digitally signed message part.

Re: GDM is not starting

2011-01-10 Thread janani s 
On Mon, Jan 10, 2011 at 3:01 PM, maximilian attems  wrote:

> Politness asks to keep Mailinglist postings on Mailinglist,
> thank you, also top posting is considered to be rude.
>
> On Mon, Jan 10, 2011 at 02:19:59PM +0530, janani s wrote:
> > Ya i  installed 2.6.37 linux image from
> > http://packages.debian.org/experimental/kernel/.. It was working
> properly
> > not able to reproduce the error..
> >
> well then look at the diffs between the configs. You miscompiled linux-2.6
>
> kernelnewbies mailinglist may help you, not our trouble.
>
> kind regards
>
> --
> maks
>

The kernel compilation was successful I did not get any error. Anyhow thanks
for the help.


Regards,
S.Janani

Bug#607709: XEN kernel crash (this time with a shorter trace)

2011-01-10 Thread Giuseppe Sacco 
Il giorno mar, 04/01/2011 alle 13.53 +, Ian Campbell ha scritto:
> On Tue, 2011-01-04 at 14:48 +0100, Giuseppe Sacco wrote:
[...]
> Thanks. Unfortunately there doesn't seem to be anything of interest in
> the "xm dmesg" output. It's possible that you need to add "loglvl=all
> guest_loglvl=all" to the hypervisor command line in order to get the
> messages. Are you able to try that?

Here it is.

Bye,
Giuseppe


bug#607709.tar.bz2
Description: application/bzip-compressed-tar

Re: GDM is not starting

2011-01-10 Thread maximilian attems 
Politness asks to keep Mailinglist postings on Mailinglist,
thank you, also top posting is considered to be rude.

On Mon, Jan 10, 2011 at 02:19:59PM +0530, janani s wrote:
> Ya i  installed 2.6.37 linux image from
> http://packages.debian.org/experimental/kernel/.. It was working properly
> not able to reproduce the error..
> 
well then look at the diffs between the configs. You miscompiled linux-2.6

kernelnewbies mailinglist may help you, not our trouble.

kind regards

-- 
maks


-- 
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/20110110093148.gd20...@vostochny.stro.at

Bug#607495: linux-image-2.6.32-5-amd64: kernel freeze

2011-01-10 Thread Timo Juhani Lindfors 
Philip Ashmore  writes:
> What I really meant was your hardware device info.

$ lspci
00:00.0 Host bridge: ATI Technologies Inc RD890 Northbridge only single slot 
PCI-e GFX Hydra part (rev 02)
00:04.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express 
gpp port D)
00:06.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express 
gpp port F)
00:07.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express 
gpp port G)
00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI 
mode] (rev 40)
00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 41)
00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller (rev 
40)
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (rev 40)
00:14.5 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller
00:16.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:16.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor 
HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address 
Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM 
Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor 
Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link 
Control
01:05.0 VGA compatible controller: S3 Inc. 86c325 [ViRGE] (rev 06)
02:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 
03)
03:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8059 PCI-E 
Gigabit Ethernet Controller (rev 11)
04:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA 
Controller (rev 03)
04:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA 
Controller (rev 03)




-- 
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/84tyhhcfqf@sauna.l.org

Bug#607141: xm block-attach failed on domU

2011-01-10 Thread Timo Juhani Lindfors 
Peter Viskup  writes:
> 'xm block-attach  phy:data/disk /dev/xvda6 w'

I can attach a block device 

$ sudo xm block-attach 27 file:/local/xen/lindi-exp1/disk.img /dev/xvda w
$ sudo xm block-list 27
Vdev  BE handle state evt-ch ring-ref BE-path
51712  00 4  9  770   /local/domain/0/backend/vbd/27/51712

[   81.988522] blkfront: xvda: barriers enabled
[   81.988852]  xvda: xvda1
[   81.988969] xvda: p1 size 979902 exceeds device capacity, limited to end of 
disk

and also detach it:

$ sudo xm block-detach 27 51712

This particular domU was started with

name = 'lindi-exp1'
vcpus = '1'
memory = '256'
kernel = '/local/xen/lindi-exp1/vmlinuz-2.6.32-5-amd64'
ramdisk = '/local/xen/lindi-exp1/initrd.img-2.6.32-5-amd64'
nfs_server = '10.7.2.17'
nfs_root = '/tftpboot/lindi-exp1'
extra = 'root=/dev/nfs ip=dhcp'
vif = [ 'mac=52:54:00:12:35:09' ]
cpuid = [ '0:eax=0x3,ebx=0x0,ecx=0x0,edx=0x0',
'1:eax=0x0f61,ecx=0xx00x0x,edx=xxx0',
'0x8000:eax=0x8004,ebx=0x0,ecx=0x0,edx=0x0',
'0x8001:eax=0x0f61,ecx=xx0x,edx=00xx000xx0xxx0xx'
 ]
# up to leaf _0003/8000_0004
# family 15 model 6 stepping 1 (Intel P4 Prescott, AMD K8)
# disable POPCNT, SSE4.[12], SSSE3
# disable HTT
# disable CMPLEGACY, SVM, EXTAPIC, ALTMOVCR8, ABM, SSE4a, MisAlignSSE,
# 3DNOWPrefetch, OSVW, IBS, SSE5, SKINIT, WDT
# disable 3DNOW, 3DNOWEXT, RDTSCP, Page1GB, FFXSR, MMXExt, MP
#
# Source: Cross-Vendor Migration
# AMD Operating Systems Research Center
# Uwe Dannowski   Andre Przywara
#   {firstname.lastna...@amd.com
# 2010 Advanced Micro Devices, Inc. All rights reserved.



-- 
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/84y66tcglr@sauna.l.org

Re: GDM is not starting

2011-01-10 Thread maximilian attems 
On Mon, Jan 10, 2011 at 12:29:21PM +0530, janani s wrote:
> 
>   I am facing some problems while booting up newly compiled
> kernel(2.6.37).. I took the source for 2.6.37 kernel(.tar.gz) from
> kernel.org website.. I have took the config file of already existing stable
> 2.6.32 kernel and created the debs for image and header.. When i installed
> the linux-image-2.6.37 , i am not able to login looks like some problem with
> GDM.. Every time i login i need to give gdm restart on the console..
> Showing some error like
> Unable to handle kernel NULL pointer dereference at 0008
> no IPv6 routers present
> Except for this problem all other things are working properly.. So anyone
> kindly suggest some solution to this problem..

did you try 2.6.37 linux image from experimenal? Can you reproduce this
trouble with it?


-- 
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/20110110081717.gc20...@vostochny.stro.at

Bug#606994: Claim £750,000.00 GBP in the Gnld New Year Promo 2011. Send‏‏‏

2011-01-10 Thread ben-morris 

Name: Country



--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/399329.6942...@web82201.mail.mud.yahoo.com