Re: netra t4
On Wed, Dec 10, 2003 at 05:19:58PM -0500, Ben Collins wrote: Booting Linux... sab82532_console_setup: can't get SAB82532 chainProgram terminated ok Boot with linux -p (or boot net linux -p for netboot). See if we can see some more info. ok boot net linux -p Boot device: /[EMAIL PROTECTED],70/[EMAIL PROTECTED],1: File and args: linux -p Timeout waiting for ARP/RARP packet 464c00 PROMLIB: Sun IEEE Boot Prom 4.2.4 2001/06/13 10:10 4Linux version 2.4.18 ([EMAIL PROTECTED]) (gcc version egcs-2.92.11 19980921 (gcc2 ss-980609 experimental)) #2 Thu Apr 11 14:2 4ARCH: SUN4U Linux version 2.4.18 ([EMAIL PROTECTED]) (gcc version egcs-2.92.11 19980921 (gcc2 ss-980609 experimental)) #2 Thu Apr 11 14:37:2 4ARCH: SUN4U ARCH: SUN4U Ethernet address: 00:03:ba:0f:6c:fb Remapping the kernel... done. On node 0 totalpages: 195880 zone(0): 196447 pages. zone(1): 0 pages. zone(2): 0 pages. Booting Linux... Found CPU 0 (node=f006fb30,mid=0) Found 1 CPU prom device tree node(s). Kernel command line: linux -p Calibrating delay loop... 499.71 BogoMIPS Memory: 1542432k available (1944k kernel code, 512k data, 168k init) [f800,5febe000] Dentry-cache hash table entries: 262144 (order: 9, 4194304 bytes) Inode-cache hash table entries: 131072 (order: 8, 2097152 bytes) Mount-cache hash table entries: 32768 (order: 6, 524288 bytes) Buffer-cache hash table entries: 131072 (order: 7, 1048576 bytes) Page-cache hash table entries: 262144 (order: 8, 2097152 bytes) POSIX conformance testing by UNIFIX PCI: Probing for controllers. PCI: Found SCHIZO, control regs at 04000440 SCHIZO PBMB: Local PCI config space at 07ffee00 SCHIZO PBMA: Local PCI config space at 07ffec00 PCI0(PBMB): Bus running at 33MHz PCI0(PBMA): Bus running at 66MHz ebus: No EBus's found. sab82532_console_setup: can't get SAB82532 chainProgram terminated ok and if i boot from the cd: Welcome to Debian GNU/Linux 3.0! This is the Debian Install CD. Keep it once you have installed your system, as you can boot from it to repair the system on your hard disk if that ever becomes necessary. WARNING: You should completely back up all of your hard disks before proceeding. The installation procedure can completely and irreversibly erase them! If you haven't made backups yet, remove the rescue CD from the drive and press L1-A to get back to the OpenBoot prompt. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. [ ENTER - Boot install ] [ Type rescue - Boot into rescue mode ] Loading initial ramdisk PROMLIB: Sun IEEE Boot Prom 4.2.4 2001/06/13 10:10 4Linux version 2.4.18 ([EMAIL PROTECTED]) (gcc version egcs-2.92.11 19980921 (gcc2 ss-980609 experimental)) #2 Thu Apr 11 14:2 4ARCH: SUN4U Linux version 2.4.18 ([EMAIL PROTECTED]) (gcc version egcs-2.92.11 19980921 (gcc2 ss-980609 experimental)) #2 Thu Apr 11 14:37:2 4ARCH: SUN4U ARCH: SUN4U Ethernet address: 00:03:ba:0f:6c:fb Remapping the kernel... done. On node 0 totalpages: 195880 zone(0): 196447 pages. zone(1): 0 pages. zone(2): 0 pages. Booting Linux... Found CPU 0 (node=f006fb30,mid=0) Found 1 CPU prom device tree node(s). Kernel command line: ro cdrom -p Calibrating delay loop... 499.71 BogoMIPS Memory: 1542432k available (1944k kernel code, 512k data, 168k init) [f800,5febe000] Dentry-cache hash table entries: 262144 (order: 9, 4194304 bytes) Inode-cache hash table entries: 131072 (order: 8, 2097152 bytes) Mount-cache hash table entries: 32768 (order: 6, 524288 bytes) Buffer-cache hash table entries: 131072 (order: 7, 1048576 bytes) Page-cache hash table entries: 262144 (order: 8, 2097152 bytes) POSIX conformance testing by UNIFIX PCI: Probing for controllers. PCI: Found SCHIZO, control regs at 04000440 SCHIZO PBMB: Local PCI config space at 07ffee00 SCHIZO PBMA: Local PCI config space at 07ffec00 PCI0(PBMB): Bus running at 33MHz PCI0(PBMA): Bus running at 66MHz ebus: No EBus's found. sab82532_console_setup: can't get SAB82532 chainProgram terminated ok This seems to be a problem with the serial console driver in the kernel. What images are you using? from ftp.debian.org: ftp pwd 257 /debian/dists/woody/main/disks-sparc/3.0.23-2002-05-21/sun4u ftp ls tftpboot.img 200 PORT command successful. Consider using PASV. 150 Here comes the directory listing. -rw-rw-r--1 1176 1176 4591072 May 18 2002 tftpboot.img 226 Directory send OK. ftp [EMAIL PROTECTED]:~$ ls -l /tftpboot/AC1533C9 -rw-r--r--1 root root 4591072 Dec 10 21:34 /tftpboot/AC1533C9 [EMAIL PROTECTED]:~$ I do need sun4u or? not sun4cmd? Note the installer fully supports serial console (I use it all the time). i hope as well that this is only a PEBKAC at me... thx for the help. charlie -- Végh Károly - System Engineer - UTA - TIS.SAS.BSS Don't worry. Everything is getting nicely out of control.
MPlayer 1.0-pre3
Hi, Just to let you know: on 9 december, MPlayer 1.0-pre3 was released and rereleased (the first version didn't even compile on any big-endian architecture.) It looks like the colour problems of the previous version have been fixed (mlib is mentioned in the long changelog), but stability is terrible compared to -pre2. Arguably, only fixing the compilation problems is not all :) It repeatedly crashes: [EMAIL PROTECTED]:~$ /usr/src/MPlayer-1.0pre3/mplayer -ao null ./returnoftheking_nl480_dl.mov ... MPlayer interrupted by signal 10 in module: decode_video - MPlayer crashed. This shouldn't happen. [EMAIL PROTECTED]:~$ /usr/src/MPlayer-1.0pre3/mplayer -ao null rtsp://streams.omroep.nl/tv/tros/2vandaag/bb.tyler.rm ... MPlayer interrupted by signal 10 in module: open_stream - MPlayer crashed. This shouldn't happen. I hope there'll be another rerelease for Sparc. :) As a sidenote, when KDE's sound daemon artsd is active, mplayer says: [EMAIL PROTECTED]:~$ /usr/src/MPlayer-1.0pre3/mplayer ./Royksopp\ -\ Remind\ Me\ \(DK\ Yankz\).avi ... audio_setup: Can't open audio device /dev/dsp: Device or resource busy ao_nas: init(): Can't open nas audio server - nosound SDL: Samplerate: 44100Hz Channels: Stereo Format Signed 16-bit (Big-Endian) Killed It is killed because my kernel (Debian's 2.4.21) oopses: Dec 11 13:24:41 cruithne kernel: Unable to handle kernel NULL pointer dereference Dec 11 13:24:41 cruithne kernel: tsk-{mm,active_mm}-context = 072a Dec 11 13:24:41 cruithne kernel: tsk-{mm,active_mm}-pgd = f80014a84000 Dec 11 13:24:41 cruithne kernel: \|/ \|/ Dec 11 13:24:41 cruithne kernel: @'/ .. \`@ Dec 11 13:24:41 cruithne kernel: /_| \__/ |_\ Dec 11 13:24:41 cruithne kernel: \__U_/ Dec 11 13:24:41 cruithne kernel: mplayer(5701): Oops Is this normal? The audio/cs4231 modules are loaded. (No such problem when I kill artsd beforehand; the Royksopp divx plays fine then, a bit slow but with the correct colours! :)) Regards, Pieter-Paul
Re: netra t4
This seems to be a problem with the serial console driver in the kernel. What images are you using? from ftp.debian.org: Try the images here: http://www.phunnypharm.org/pub/for/sparc-folks/disks-sparc/current/ -- Debian - http://www.debian.org/ Linux 1394 - http://www.linux1394.org/ Subversion - http://subversion.tigris.org/ WatchGuard - http://www.watchguard.com/
Re: netra t4
Johan Verrept sent a patch to this list and DaveM on 26.Jan.2003 for proper booting on the T4, but it apparently never made it into the kernel sources (as per bkbits). It does not specifically address the SAB issue, but does address the fill_ebus_child issue. http://lists.debian.org/debian-sparc/2003/debian-sparc-200301/msg00149.html E VEGH Karoly wrote: On Thu, Dec 11, 2003 at 08:53:03AM -0500, Ben Collins wrote: This seems to be a problem with the serial console driver in the kernel. What images are you using? from ftp.debian.org: Try the images here: http://www.phunnypharm.org/pub/for/sparc-folks/disks-sparc/current/ tried: http://www.phunnypharm.org/pub/for/sparc-folks/disks-sparc/current/sparc64/tftpboot.img 1: booting with a simple 'boot net' - ok boot net Boot device: /[EMAIL PROTECTED],70/[EMAIL PROTECTED],1: File and args: Timeout waiting for ARP/RARP packet 535400 Remapping the kernel... done. Booting Linux... UGH: property for SUNW,lomv was 24, need 1 --- as for the last line, I found the following URL: http://lists.debian.org/debian-sparc/2003/debian-sparc-200302/msg00034.html 2: booting with 'boot net linux -p' ok boot net linux -p Boot device: /[EMAIL PROTECTED],70/[EMAIL PROTECTED],1: File and args: linux -p Timeout waiting for ARP/RARP packet 535400 PROMLIB: Sun IEEE Boot Prom 4.2.4 2001/06/13 10:10 4Linux version 2.4.21 ([EMAIL PROTECTED]) (gcc version 3.3.2 (Debian)) #1 Sat Nov 29 15:40:07 EST 2003 4ARCH: SUN4U Linux version 2.4.21 ([EMAIL PROTECTED]) (gcc version 3.3.2 (Debian)) #1 Sat Nov 29 15:40:07 EST 2003 4ARCH: SUN4U ARCH: SUN4U Ethernet address: 00:03:ba:0f:6c:fb Remapping the kernel... done. On node 0 totalpages: 195776 zone(0): 196447 pages. zone(1): 0 pages. zone(2): 0 pages. Booting Linux... Found CPU 0 (node=f006fb30,mid=0) Found 1 CPU prom device tree node(s). Kernel command line: linux -p Calibrating delay loop... 499.71 BogoMIPS Memory: 1547720k available (2504k kernel code, 576k data, 184k init) [f800,5febe000] Dentry cache hash table entries: 262144 (order: 9, 4194304 bytes) Inode cache hash table entries: 131072 (order: 8, 2097152 bytes) Mount cache hash table entries: 512 (order: 0, 8192 bytes) Buffer-cache hash table entries: 131072 (order: 7, 1048576 bytes) Page-cache hash table entries: 262144 (order: 8, 2097152 bytes) POSIX conformance testing by UNIFIX PCI: Probing for controllers. SCHIZO0 PBMB: ver[4:0], portid 8, cregs[4000440] pregs[4000470] SCHIZO0 PBMB: PCI CFG[7ffee00] IO[7ffef00] MEM[7fe] SCHIZO0 PBMA: ver[4:0], portid 8, cregs[4000440] pregs[4000460] SCHIZO0 PBMA: PCI CFG[7ffec00] IO[7ffed00] MEM[7fd] PCI-IRQ: Routing bus[ 0] slot[ 5] map[0] to INO[1d] PCI-IRQ: Routing bus[ 0] slot[ 5] map[0] to INO[1f] PCI-IRQ: Routing bus[ 0] slot[ 6] map[0] to INO[18] PCI-IRQ: Routing bus[ 0] slot[ 6] map[0] to INO[19] PCI0(PBMB): Bus running at 33MHz PCI-IRQ: Routing bus[ 1] slot[ 4] map[0] to INO[04] PCI-IRQ: Routing bus[ 2] slot[ 0] map[1] to INO[01] PCI-IRQ: Routing bus[ 2] slot[ 1] map[1] to INO[02] PCI-IRQ: Routing bus[ 2] slot[ 2] map[1] to INO[03] PCI-IRQ: Routing bus[ 2] slot[ 3] map[1] to INO[00] PCI0(PBMA): Bus running at 66MHz ebus0: [flashprom] [bbc] [power] [i2c - (dimm-fru) (dimm-fru) (dimm-fru) (dimm-fru) (dimm-fru) (dimm-fru) (dimm-fru) (1 0Kernel panic: fill_ebus_child Press L1-A to return to the boot prom --- hope this tells you more than it does to me... thanks for the help, charlie
Configuring and compiling kernel fails on ultra 1
Hello list, something on my newly installed Ultra1 is going very wrong. I am running sarge on kernel 2.4.18 and want to upgrade to kernel 2.2.20, but when I run 'make menuconfig' I get the below output. It stops at this '.done.' and nothing more. when I do a 'strace' it also stops there and no further info. So I did 'make xconfig' and got another error. Also pasted below. Well, then I did 'make config' and that at least worked. But then after configuring I run 'make dep' and it stops with an error, which looks like a bug to me, but as sarge is pretty stable, I cannot really believe it. Now the error messages, in chronological order, I hope someone knows what is going on: --- make menuconfig --- shadow:/usr/src/kernel-source-2.4.22# make menuconfig rm -f include/asm ( cd include ; ln -sf asm-sparc64 asm) make -C scripts/lxdialog all make[1]: Entering directory `/usr/src/kernel-source-2.4.22/scripts/lxdialog' make[1]: Leaving directory `/usr/src/kernel-source-2.4.22/scripts/lxdialog' /bin/sh scripts/Menuconfig arch/sparc64/config.in Using defaults found in .config Preparing scripts: functions, parsingdone. make: *** [menuconfig] Error 1 (note: the last line appears after I hit CTRL-C) --- make xconfig --- shadow:/usr/src/kernel-source-2.4.22# make xconfig rm -f include/asm ( cd include ; ln -sf asm-sparc64 asm) make -C scripts kconfig.tk make[1]: Entering directory `/usr/src/kernel-source-2.4.22/scripts' cat header.tk ./kconfig.tk ./tkparse ../arch/sparc64/config.in kconfig.tk /bin/sh: line 1: ./tkparse: cannot execute binary file make[1]: *** [kconfig.tk] Error 126 make[1]: Leaving directory `/usr/src/kernel-source-2.4.22/scripts' make: *** [xconfig] Error 2 shadow:/usr/src/kernel-source-2.4.22# make dep shadow:/usr/src/kernel-source-2.4.22# make dep make -C arch/sparc64/kernel check_asm make[1]: Entering directory `/usr/src/kernel-source-2.4.22/arch/sparc64/kernel' gcc -E -D__KERNEL__ -I/usr/src/kernel-source-2.4.22/include -P tmp.c -o tmp.i /bin/sh ./check_asm.sh -data task tmp.i check_asm_data.c /bin/sh ./check_asm.sh -data mm tmp.i check_asm_data.c /bin/sh ./check_asm.sh -data thread tmp.i check_asm_data.c gcc -D__KERNEL__ -I/usr/src/kernel-source-2.4.22/include -m64 -mcmodel=medlow -ffixed-g4 -S -o check_asm_data.s check_asm_data.c /bin/sh ./check_asm.sh -ints check_asm_data.s check_asm.c /bin/sh ./check_asm.sh -printf task tmp.i check_asm.c /bin/sh ./check_asm.sh -printf mm tmp.i check_asm.c /bin/sh ./check_asm.sh -printf thread tmp.i check_asm.c gcc -o check_asm check_asm.c check_asm.c:312: error: field name not in record or union initializer check_asm.c:312: error: (near initialization for `check_asm_data') check_asm.c:313: warning: initialization makes integer from pointer without a cast check_asm.c:313: error: initializer element is not computable at load time check_asm.c:313: error: (near initialization for `check_asm_data[307]') make[1]: *** [check_asm] Error 1 make[1]: Leaving directory `/usr/src/kernel-source-2.4.22/arch/sparc64/kernel' make: *** [check_asm] Error 2 shadow:/usr/src/kernel-source-2.4.22#
Re: netra t4
On Thu, 11 Dec 2003 10:56:57 -0800 Eric Brower [EMAIL PROTECTED] wrote: http://lists.debian.org/debian-sparc/2003/debian-sparc-200301/msg00149.html I overlooked this patch, it was not that I had rejected it. Eric, thanks for bringing it back to my attention, I'll add it to all of my trees right now. Thanks again.