Re: Sun SS20/ Etch network problem
On Wed, Dec 07, 2005 at 06:19:21PM +0100, Emmanuel Kasper wrote: > Try to do 'modprobe lance' to load the module, then if it works you > should see your card in 'dmesg | grep eth' Wouldn't that be sunlance rather than lance ? The driver module is called sunlance under 2.4 kernels, and I don't see it having changed in 2.6. Anyway like Emmanuel wrote, your network card driver is not loaded, hence no network. When it loads you'll see it in dmesg, in /proc/net/dev, in the output of "/sbin/ifconfig -a" or "/sbin/ip addr show", etc... . -Nicolas Dade -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Sun SS20/ Etch network problem
Hello The problem you have looks like your network card was not detected, or the module not loaded. Try to do 'modprobe lance' to load the module, then if it works you should see your card in 'dmesg | grep eth' Do you know whcih network card do you have ? In PCI based machines ultrasparc lspci ouputs the content of the pci bus. This might also work on your SS20, althought I think is sbus based. According to this, http://blog.wooyd.org/?p=25, it can be quite difficult to use a sparc32 kernel with Etch. I advise you to saty with debian stable (3.1) Manu Andrew, Chris Mr a écrit : Can anybody help? Thanks, Chris. -Original Message- From: Andrew, Chris Mr Sent: 30 November 2005 10:06 To: 'Andrew M.A. Cater' Subject: Internet-authorised: RE: Sun SS20/ Etch network problem Andy, Thanks for your reply. Please see the following, in response to your questions: /etc/network/options is deprecated - perhaps? The above files says ip_forward=no spoof protect=yes syncookies=no What does ifconfig eth0 up do? This returns: Eth0: Error getting interface flags, no such device What does the stanza in /etc/network/interfaces look like? It says: Primary network interface auto eth0 iface eth0 inet dhcp cd /lib/modules//net insmod lance.ko What's the result? Autocompleted the bit, but no NET directory below it. Tried insmod lance.ko, no such file or directory. It looks like my eth0 hasn't been created, but I'm not sure how to rectify that. Any help appreciated. Many thanks, Chris. CJH ANDREW chris.andrew485 mod.uk -Original Message- From: Andrew M.A. Cater [mailto:[EMAIL PROTECTED] Sent: 28 November 2005 19:58 To: debian-sparc@lists.debian.org Subject: Re: Sun SS20/ Etch network problem On Mon, Nov 28, 2005 at 11:04:04AM -, Andrew, Chris Mr wrote: Hi, all. Last night, I downloaded and installed Etch (latest image from the D-I page at debian.org) on an SS20 with a Sun Lance network card. When I reboot after the first part of the install, I get the message that 'eth0 is deprecated' or something like that. When I do ifconfig, all I see is the loopback address. /etc/network/options is deprecated - perhaps? What does ifconfig eth0 up do? What does the stanza in /etc/network/interfaces look like? Andy Could it possibly be that the right module isn't getting loaded at boot? Alternatively, is it possible to slow the network bit of the boot process, to give the card sufficient time to get an ip address from the router? cd /lib/modules//net insmod lance.ko What's the result? Andy Any thoughts appreciated. Many thanks, Chris. CJH ANDREW [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
RE: Sun SS20/ Etch network problem
Can anybody help? Thanks, Chris. -Original Message- From: Andrew, Chris Mr Sent: 30 November 2005 10:06 To: 'Andrew M.A. Cater' Subject: Internet-authorised: RE: Sun SS20/ Etch network problem Andy, Thanks for your reply. Please see the following, in response to your questions: /etc/network/options is deprecated - perhaps? The above files says ip_forward=no spoof protect=yes syncookies=no What does ifconfig eth0 up do? This returns: Eth0: Error getting interface flags, no such device What does the stanza in /etc/network/interfaces look like? It says: Primary network interface auto eth0 iface eth0 inet dhcp cd /lib/modules//net insmod lance.ko What's the result? Autocompleted the bit, but no NET directory below it. Tried insmod lance.ko, no such file or directory. It looks like my eth0 hasn't been created, but I'm not sure how to rectify that. Any help appreciated. Many thanks, Chris. CJH ANDREW chris.andrew485 mod.uk -Original Message- From: Andrew M.A. Cater [mailto:[EMAIL PROTECTED] Sent: 28 November 2005 19:58 To: debian-sparc@lists.debian.org Subject: Re: Sun SS20/ Etch network problem On Mon, Nov 28, 2005 at 11:04:04AM -, Andrew, Chris Mr wrote: > Hi, all. > > Last night, I downloaded and installed Etch (latest image from the D-I > page at debian.org) on an SS20 with a Sun Lance network card. When I > reboot after the first part of the install, I get the message that > 'eth0 is deprecated' or something like that. When I do ifconfig, all I > see is the loopback address. > /etc/network/options is deprecated - perhaps? What does ifconfig eth0 up do? What does the stanza in /etc/network/interfaces look like? Andy > > Could it possibly be that the right module isn't getting loaded at boot? > Alternatively, is it possible to slow the network bit of the boot > process, to give the card sufficient time to get an ip address from > the router? > cd /lib/modules//net insmod lance.ko What's the result? Andy > Any thoughts appreciated. > > Many thanks, > > Chris. > > CJH ANDREW > [EMAIL PROTECTED] > -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Sun SS20/ Etch network problem
On Mon, Nov 28, 2005 at 11:04:04AM -, Andrew, Chris Mr wrote: > Hi, all. > > Last night, I downloaded and installed Etch (latest image from the D-I > page at debian.org) on an SS20 with a Sun Lance network card. When I > reboot after the first part of the install, I get the message that 'eth0 > is deprecated' or something like that. When I do ifconfig, all I see is > the loopback address. > /etc/network/options is deprecated - perhaps? What does ifconfig eth0 up do? What does the stanza in /etc/network/interfaces look like? Andy > > Could it possibly be that the right module isn't getting loaded at boot? > Alternatively, is it possible to slow the network bit of the boot > process, to give the card sufficient time to get an ip address from the > router? > cd /lib/modules//net insmod lance.ko What's the result? Andy > Any thoughts appreciated. > > Many thanks, > > Chris. > > CJH ANDREW > [EMAIL PROTECTED] > -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Sun SS20/ Etch network problem
Hi, all. Last night, I downloaded and installed Etch (latest image from the D-I page at debian.org) on an SS20 with a Sun Lance network card. When I reboot after the first part of the install, I get the message that 'eth0 is deprecated' or something like that. When I do ifconfig, all I see is the loopback address. The network was configured correctly during the install, although it did take 2 tries to find dhcp on my adsl router/ hub, this suggested to me that the card was a bit slow. Could it possibly be that the right module isn't getting loaded at boot? Alternatively, is it possible to slow the network bit of the boot process, to give the card sufficient time to get an ip address from the router? Any thoughts appreciated. Many thanks, Chris. CJH ANDREW [EMAIL PROTECTED]