Wojciech Ziniewicz napisał(a):
2006/10/1, Paweł Kordys [EMAIL PROTECTED]:
Witam,
Ma ktoś może pomysł dlaczego po
shutdown -hF now nie podnosi się interfesj eth1, po
shutdown -h now wszystko jest ok.
Jakieś sugestie gdzie w ogóle szukac???
jakies acpid apmd itd ? ..
a cóż to może mieć wspólnego? Cóż załączam diff pomiędzy dmesg'ami w obu
przypadkach może komuś uda się coś z tego wywróżyc :-)
pozdr,
45c45
Detected 1464.676 MHz processor.
---
Detected 1464.611 MHz processor.
52c52
Calibrating delay using timer specific routine.. 2932.51 BogoMIPS
(lpj=5865025)
---
Calibrating delay using timer specific routine.. 2932.51 BogoMIPS
(lpj=5865020)
151c151
audit(1160484717.536:1): initialized
---
audit(1160484999.324:1): initialized
180c180
ACPI: Thermal Zone [THRM] (37 C)
---
ACPI: Thermal Zone [THRM] (38 C)
256,259d255
irda_init()
NET: Registered protocol family 23
input: PC Speaker as /class/input/input1
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
260a257,259
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
input: PC Speaker as /class/input/input1
eth1394: eth0: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
261a261,262
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
265,266d265
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
269,274d267
i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000
i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5100
eth1394: eth0: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
input: ImPS/2 Generic Wheel Mouse as /class/input/input2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
291,292c284,285
tuner 2-0061: chip found @ 0xc2 (bt878 #0 [sw])
tuner 2-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
---
tuner 0-0061: chip found @ 0xc2 (bt878 #0 [sw])
tuner 0-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
295c288,289
bttv0: PLL: 28636363 = 35468950 ..6ts: Compaq touchscreen protocol
output
---
bttv0: PLL: 28636363 = 35468950 ..6i2c_adapter i2c-1: nForce2
SMBus adapter at 0x5000
i2c_adapter i2c-2: nForce2 SMBus adapter at 0x5100
297,300c291,294
mice: PS/2 mouse device common for all mice
ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 20
ACPI: PCI Interrupt :00:06.0[A] - Link [APCJ] - GSI 20 (level,
high) - IRQ 193
PCI: Setting latency timer of device :00:06.0 to 64
---
input: ImPS/2 Generic Wheel Mouse as /class/input/input2
irda_init()
NET: Registered protocol family 23
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
302,303d295
intel8x0_measure_ac97_clock: measured 52677 usecs
intel8x0: clocking to 47409
309a302,309
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ts: Compaq touchscreen protocol output
mice: PS/2 mouse device common for all mice
ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 20
ACPI: PCI Interrupt :00:06.0[A] - Link [APCJ] - GSI 20 (level,
high) - IRQ 193
PCI: Setting latency timer of device :00:06.0 to 64
intel8x0_measure_ac97_clock: measured 52658 usecs
intel8x0: clocking to 48000
318,319d317
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
322a321,322
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
329a330
eth1: no IPv6 routers present
