mouse cursor offset error on unstable
Hi I am not sure what event casuses this but very frequently after running X for some time, my mouse cursor becomes offset. It points about 1cm to the right of where it actually is. Any idea how to fix this? Thanx -- Eric Smith
mouse cursor offset error on unstable
Hi I am not sure what event casuses this but very frequently after running X for some time, my mouse cursor becomes offset. It points about 1cm to the right of where it actually is. Any idea how to fix this? Thanx -- Eric Smith -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Apple Multiscan 1705 - writing Xf86Config
According to Michel Dänzer on Thu, Feb 14, 2002 at 03:19:44AM +0100: > On Don, 2002-02-14 at 01:55, Eric Smith wrote: > > Is this an appropriate forum to ask for assistance in writing > > modelines for my specific hardware above? > > Actually it's not, anyway with XFree86 4.x, you normally don't have to > worry about modelines. Knowing the frequency ranges the monitor can > handle should be enough, or is there a specific problem? Seems 4.x aint compatible with my display card, so using 3.3.6a and cannot get a resolution higher than 640 x 480 - see output below. If I try to run the fbdev server, I get a compaint that the /dev/... does not exist. Cannot achieve a higher resolution under windows either though. (If there is a more appropriate forum for me to go with this, then please advise.) XFree86 Version 3.3.6a / X Window System (protocol Version 11, revision 0, vendor release 6300) Release Date: xx November 2000 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (see http://www.XFree86.Org/FAQ) Operating System: Linux 2.4.13 i686 [ELF] Configured drivers: S3: accelerated server for S3 graphics adaptors (Patchlevel 0) newmmio, mmio_928, s3_generic (using VT number 9) F86Config: /etc/X11/XF86Config (**) stands for supplied, (--) stands for probed/default values (**) XKB: keymap: "xfree86(us)" (overrides other XKB settings) (**) Mouse: type: Microsoft, device: /dev/mouse, baudrate: 1200 (**) Mouse: buttons: 3, Chorded middle button (**) S3: Graphics device ID: "g" (**) S3: Monitor ID: "g" (--) S3: Mode "800x600" needs hsync freq of 35.16 kHz. Deleted. (--) S3: Mode "1024x768" needs hsync freq of 35.52 kHz. Deleted. (--) S3: Mode "640x400" needs hsync freq of 37.86 kHz. Deleted. (--) S3: Mode "640x480" needs hsync freq of 36.46 kHz. Deleted. (--) S3: Mode "640x480" needs hsync freq of 37.50 kHz. Deleted. (--) S3: Mode "800x600" needs hsync freq of 37.88 kHz. Deleted. (--) S3: Mode "640x480" needs hsync freq of 43.27 kHz. Deleted. (--) S3: Mode "1152x864" needs hsync freq of 43.92 kHz. Deleted. (--) S3: Mode "800x600" needs hsync freq of 48.08 kHz. Deleted. (--) S3: Mode "1024x768" needs hsync freq of 48.36 kHz. Deleted. (--) S3: Mode "640x480" needs hsync freq of 53.01 kHz. Deleted. (--) S3: Mode "1152x864" needs hsync freq of 53.51 kHz. Deleted. (--) S3: Mode "800x600" needs hsync freq of 55.84 kHz. Deleted. (--) S3: Mode "1024x768" needs hsync freq of 56.48 kHz. Deleted. (--) S3: Mode "1280x1024" needs hsync freq of 51.02 kHz. Deleted. (--) S3: Mode "800x600" needs hsync freq of 64.02 kHz. Deleted. (--) S3: Mode "1024x768" needs hsync freq of 62.50 kHz. Deleted. (--) S3: Mode "1152x864" needs hsync freq of 62.42 kHz. Deleted. (--) S3: Mode "1280x1024" needs hsync freq of 64.25 kHz. Deleted. (--) S3: Mode "1024x768" needs hsync freq of 70.24 kHz. Deleted. (--) S3: Mode "1152x864" needs hsync freq of 70.88 kHz. Deleted. (--) S3: Mode "1280x1024" needs hsync freq of 74.59 kHz. Deleted. (--) S3: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted. (--) S3: Mode "1152x864" needs hsync freq of 76.01 kHz. Deleted. (--) S3: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted. (--) S3: Mode "1024x768" needs hsync freq of 80.21 kHz. Deleted. (--) S3: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted. (--) S3: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted. (--) S3: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted. (--) S3: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted. (--) S3: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted. (--) S3: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted. (--) S3: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted. (--) S3: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted. (--) S3: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted. (--) S3: Mode "512x384" needs vert refresh rate of 77.97 Hz. Deleted. (--) S3: Mode "512x384" needs vert refresh rate of 85.09 Hz. Deleted. (--) S3: Mode "320x240" needs hsync freq of 39.38 kHz. Deleted. (--) S3: Mode "400x300" needs hsync freq of 35.16 kHz. Deleted. (--) S3: Mode "400x300" needs hsync freq of 37.88 kHz. Deleted. (--) S3: Mode "400x300" needs hsync freq of 48.08 kHz. Deleted. (--) S3: Mode "480x300" needs hsync freq of 35.16 kHz. Deleted. (--) S3: Mode "480x300" needs hsync freq of 37.80 kHz. Deleted. (--) S3: Mode "480x300" needs hsync freq of 39.56 kHz. Dele
Re: Apple Multiscan 1705 - writing Xf86Config
According to Michel Dänzer on Thu, Feb 14, 2002 at 03:19:44AM +0100: > On Don, 2002-02-14 at 01:55, Eric Smith wrote: > > Is this an appropriate forum to ask for assistance in writing > > modelines for my specific hardware above? > > Actually it's not, anyway with XFree86 4.x, you normally don't have to > worry about modelines. Knowing the frequency ranges the monitor can > handle should be enough, or is there a specific problem? Seems 4.x aint compatible with my display card, so using 3.3.6a and cannot get a resolution higher than 640 x 480 - see output below. If I try to run the fbdev server, I get a compaint that the /dev/... does not exist. Cannot achieve a higher resolution under windows either though. (If there is a more appropriate forum for me to go with this, then please advise.) XFree86 Version 3.3.6a / X Window System (protocol Version 11, revision 0, vendor release 6300) Release Date: xx November 2000 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (see http://www.XFree86.Org/FAQ) Operating System: Linux 2.4.13 i686 [ELF] Configured drivers: S3: accelerated server for S3 graphics adaptors (Patchlevel 0) newmmio, mmio_928, s3_generic (using VT number 9) F86Config: /etc/X11/XF86Config (**) stands for supplied, (--) stands for probed/default values (**) XKB: keymap: "xfree86(us)" (overrides other XKB settings) (**) Mouse: type: Microsoft, device: /dev/mouse, baudrate: 1200 (**) Mouse: buttons: 3, Chorded middle button (**) S3: Graphics device ID: "g" (**) S3: Monitor ID: "g" (--) S3: Mode "800x600" needs hsync freq of 35.16 kHz. Deleted. (--) S3: Mode "1024x768" needs hsync freq of 35.52 kHz. Deleted. (--) S3: Mode "640x400" needs hsync freq of 37.86 kHz. Deleted. (--) S3: Mode "640x480" needs hsync freq of 36.46 kHz. Deleted. (--) S3: Mode "640x480" needs hsync freq of 37.50 kHz. Deleted. (--) S3: Mode "800x600" needs hsync freq of 37.88 kHz. Deleted. (--) S3: Mode "640x480" needs hsync freq of 43.27 kHz. Deleted. (--) S3: Mode "1152x864" needs hsync freq of 43.92 kHz. Deleted. (--) S3: Mode "800x600" needs hsync freq of 48.08 kHz. Deleted. (--) S3: Mode "1024x768" needs hsync freq of 48.36 kHz. Deleted. (--) S3: Mode "640x480" needs hsync freq of 53.01 kHz. Deleted. (--) S3: Mode "1152x864" needs hsync freq of 53.51 kHz. Deleted. (--) S3: Mode "800x600" needs hsync freq of 55.84 kHz. Deleted. (--) S3: Mode "1024x768" needs hsync freq of 56.48 kHz. Deleted. (--) S3: Mode "1280x1024" needs hsync freq of 51.02 kHz. Deleted. (--) S3: Mode "800x600" needs hsync freq of 64.02 kHz. Deleted. (--) S3: Mode "1024x768" needs hsync freq of 62.50 kHz. Deleted. (--) S3: Mode "1152x864" needs hsync freq of 62.42 kHz. Deleted. (--) S3: Mode "1280x1024" needs hsync freq of 64.25 kHz. Deleted. (--) S3: Mode "1024x768" needs hsync freq of 70.24 kHz. Deleted. (--) S3: Mode "1152x864" needs hsync freq of 70.88 kHz. Deleted. (--) S3: Mode "1280x1024" needs hsync freq of 74.59 kHz. Deleted. (--) S3: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted. (--) S3: Mode "1152x864" needs hsync freq of 76.01 kHz. Deleted. (--) S3: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted. (--) S3: Mode "1024x768" needs hsync freq of 80.21 kHz. Deleted. (--) S3: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted. (--) S3: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted. (--) S3: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted. (--) S3: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted. (--) S3: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted. (--) S3: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted. (--) S3: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted. (--) S3: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted. (--) S3: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted. (--) S3: Mode "512x384" needs vert refresh rate of 77.97 Hz. Deleted. (--) S3: Mode "512x384" needs vert refresh rate of 85.09 Hz. Deleted. (--) S3: Mode "320x240" needs hsync freq of 39.38 kHz. Deleted. (--) S3: Mode "400x300" needs hsync freq of 35.16 kHz. Deleted. (--) S3: Mode "400x300" needs hsync freq of 37.88 kHz. Deleted. (--) S3: Mode "400x300" needs hsync freq of 48.08 kHz. Deleted. (--) S3: Mode "480x300" needs hsync freq of 35.16 kHz. Deleted. (--) S3: Mode "480x300" needs hsync freq of 37.80 kHz. Deleted. (--) S3: Mode "480x300" needs hsync freq of 39.56 kHz. Dele
Apple Multiscan 1705 - writing Xf86Config
Is this an appropriate forum to ask for assistance in writing modelines for my specific hardware above? If not please suggest where I might do this. Many thanks -- Eric Smith
Apple Multiscan 1705 - writing Xf86Config
Is this an appropriate forum to ask for assistance in writing modelines for my specific hardware above? If not please suggest where I might do this. Many thanks -- Eric Smith -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
running 3.x on sid
I have not managed to get 4.x to work for my S3 Trio64 chip and would like to revert to the version 3.x. Would someone please tell me the safest (and hopefully simple) way to do this. Thank you (a lot). -- Eric Smith
running 3.x on sid
I have not managed to get 4.x to work for my S3 Trio64 chip and would like to revert to the version 3.x. Would someone please tell me the safest (and hopefully simple) way to do this. Thank you (a lot). -- Eric Smith -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
sid 4.1 configuration problem
My knowledge of X does not allow me to be too concise as I am not sure where to go to isolate the problem. SO I have attached quite a lot of bytes in the hope that someone may be able to identify the source of the problem. I have a display where the top 20% is not usable - it has the normal pin-cushion background of a raw X session but the mouse does not enter the region. This problem was not present while on 3.x. After trying just about every config method I could glean, the problem is still there. I have attached the XFree86Config-4 that was created with xf86cfg and the /var/log/Xfree86.0.log appropriately renamed. This as you see failed with a screen not found error. The other config and log pair (new) was created with X -config and this gives a sort of working display with the problem of the 20% unusable screen. Any clues please? thanx -- Eric Smith Section "ServerLayout" Identifier "Default Layout" Screen "Default Screen" 0 0 InputDevice"Generic Keyboard" InputDevice"Configured Mouse" InputDevice"Generic Mouse" EndSection Section "ServerLayout" Identifier "Layout2" EndSection Section "Files" FontPath "unix/:7100" FontPath "/usr/lib/X11/fonts/misc" FontPath "/usr/lib/X11/fonts/cyrillic" FontPath "/usr/lib/X11/fonts/100dpi/:unscaled" FontPath "/usr/lib/X11/fonts/75dpi/:unscaled" FontPath "/usr/lib/X11/fonts/Type1" FontPath "/usr/lib/X11/fonts/Speedo" FontPath "/usr/lib/X11/fonts/100dpi" FontPath "/usr/lib/X11/fonts/75dpi" EndSection Section "Module" Load "ddc" Load "GLcore" Load "dbe" Load "dri" Load "extmod" Load "glx" Load "pex5" Load "record" Load "xie" Load "bitmap" Load "freetype" Load "speedo" Load "type1" Load "vbe" Load "int10" EndSection Section "InputDevice" Identifier "Generic Keyboard" Driver "keyboard" Option "CoreKeyboard" Option "XkbRules" "xfree86" Option "XkbModel" "pc101" Option "XkbLayout" "us" EndSection Section "InputDevice" Identifier "Configured Mouse" Driver "mouse" Option "CorePointer" Option "Device" "/dev/ttyS0" Option "Protocol" "Microsoft" EndSection Section "InputDevice" Identifier "Generic Mouse" Driver "mouse" Option "SendCoreEvents" "true" Option "Device" "/dev/input/mice" Option "Protocol" "ImPS/2" EndSection Section "Monitor" Identifier "Generic Monitor" HorizSync31.5 - 35.1 VertRefresh 50.0 - 90.0 Option "DPMS" EndSection Section "Device" Identifier "Generic Video Card" Driver "s3virge" Option "UseFBDev" "true" EndSection Section "Screen" Identifier "Default Screen" Device "Generic Video Card" Monitor"Generic Monitor" DefaultDepth 1 SubSection "Display" Depth 1 Modes"640x480" EndSubSection SubSection "Display" Depth 4 Modes"640x480" EndSubSection SubSection "Display" Depth 8 Modes"640x480" EndSubSection SubSection "Display" Depth 15 Modes"640x480" EndSubSection SubSection "Display" Depth 16 Modes"640x480" EndSubSection SubSection "Display" Depth 24 Modes"640x480" EndSubSection EndSection Section "DRI" Mode 0666 EndSection This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to XFree86@XFree86.Org and patches submitted to [EMAIL PROTECTED] Before reporting bugs in pre-release versions,