Re: Apple Multiscan 1705 - writing Xf86Config
take a look at: http://koala.ilog.fr/cgi-bin/nph-colas-modelines
Re: Apple Multiscan 1705 - writing Xf86Config
take a look at: http://koala.ilog.fr/cgi-bin/nph-colas-modelines -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Apple Multiscan 1705 - writing Xf86Config
According to Michel Dänzer on Thu, Feb 14, 2002 at 03:19:44AM +0100: > On Don, 2002-02-14 at 01:55, Eric Smith wrote: > > Is this an appropriate forum to ask for assistance in writing > > modelines for my specific hardware above? > > Actually it's not, anyway with XFree86 4.x, you normally don't have to > worry about modelines. Knowing the frequency ranges the monitor can > handle should be enough, or is there a specific problem? Seems 4.x aint compatible with my display card, so using 3.3.6a and cannot get a resolution higher than 640 x 480 - see output below. If I try to run the fbdev server, I get a compaint that the /dev/... does not exist. Cannot achieve a higher resolution under windows either though. (If there is a more appropriate forum for me to go with this, then please advise.) XFree86 Version 3.3.6a / X Window System (protocol Version 11, revision 0, vendor release 6300) Release Date: xx November 2000 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (see http://www.XFree86.Org/FAQ) Operating System: Linux 2.4.13 i686 [ELF] Configured drivers: S3: accelerated server for S3 graphics adaptors (Patchlevel 0) newmmio, mmio_928, s3_generic (using VT number 9) F86Config: /etc/X11/XF86Config (**) stands for supplied, (--) stands for probed/default values (**) XKB: keymap: "xfree86(us)" (overrides other XKB settings) (**) Mouse: type: Microsoft, device: /dev/mouse, baudrate: 1200 (**) Mouse: buttons: 3, Chorded middle button (**) S3: Graphics device ID: "g" (**) S3: Monitor ID: "g" (--) S3: Mode "800x600" needs hsync freq of 35.16 kHz. Deleted. (--) S3: Mode "1024x768" needs hsync freq of 35.52 kHz. Deleted. (--) S3: Mode "640x400" needs hsync freq of 37.86 kHz. Deleted. (--) S3: Mode "640x480" needs hsync freq of 36.46 kHz. Deleted. (--) S3: Mode "640x480" needs hsync freq of 37.50 kHz. Deleted. (--) S3: Mode "800x600" needs hsync freq of 37.88 kHz. Deleted. (--) S3: Mode "640x480" needs hsync freq of 43.27 kHz. Deleted. (--) S3: Mode "1152x864" needs hsync freq of 43.92 kHz. Deleted. (--) S3: Mode "800x600" needs hsync freq of 48.08 kHz. Deleted. (--) S3: Mode "1024x768" needs hsync freq of 48.36 kHz. Deleted. (--) S3: Mode "640x480" needs hsync freq of 53.01 kHz. Deleted. (--) S3: Mode "1152x864" needs hsync freq of 53.51 kHz. Deleted. (--) S3: Mode "800x600" needs hsync freq of 55.84 kHz. Deleted. (--) S3: Mode "1024x768" needs hsync freq of 56.48 kHz. Deleted. (--) S3: Mode "1280x1024" needs hsync freq of 51.02 kHz. Deleted. (--) S3: Mode "800x600" needs hsync freq of 64.02 kHz. Deleted. (--) S3: Mode "1024x768" needs hsync freq of 62.50 kHz. Deleted. (--) S3: Mode "1152x864" needs hsync freq of 62.42 kHz. Deleted. (--) S3: Mode "1280x1024" needs hsync freq of 64.25 kHz. Deleted. (--) S3: Mode "1024x768" needs hsync freq of 70.24 kHz. Deleted. (--) S3: Mode "1152x864" needs hsync freq of 70.88 kHz. Deleted. (--) S3: Mode "1280x1024" needs hsync freq of 74.59 kHz. Deleted. (--) S3: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted. (--) S3: Mode "1152x864" needs hsync freq of 76.01 kHz. Deleted. (--) S3: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted. (--) S3: Mode "1024x768" needs hsync freq of 80.21 kHz. Deleted. (--) S3: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted. (--) S3: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted. (--) S3: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted. (--) S3: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted. (--) S3: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted. (--) S3: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted. (--) S3: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted. (--) S3: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted. (--) S3: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted. (--) S3: Mode "512x384" needs vert refresh rate of 77.97 Hz. Deleted. (--) S3: Mode "512x384" needs vert refresh rate of 85.09 Hz. Deleted. (--) S3: Mode "320x240" needs hsync freq of 39.38 kHz. Deleted. (--) S3: Mode "400x300" needs hsync freq of 35.16 kHz. Deleted. (--) S3: Mode "400x300" needs hsync freq of 37.88 kHz. Deleted. (--) S3: Mode "400x300" needs hsync freq of 48.08 kHz. Deleted. (--) S3: Mode "480x300" needs hsync freq of 35.16 kHz. Deleted. (--) S3: Mode "480x300" needs hsync freq of 37.80 kHz. Deleted. (--) S3: Mode "480x300" needs hsync freq of 39.56 kHz. Deleted. (--) S3: Mode "480x300" needs hsync freq of 48.00 kHz. Deleted. (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/100dpi/,/usr/X11R6/lib/X11/fonts/75dpi/" (--) S3: PCI: Trio32/64 rev 0, Linear FB @ 0xff00 (--) S3: chipset: Trio64 rev. 20 (--) S3: chipset driver: mmio_928 (--) S3: c
Re: Apple Multiscan 1705 - writing Xf86Config
According to Michel Dänzer on Thu, Feb 14, 2002 at 03:19:44AM +0100: > On Don, 2002-02-14 at 01:55, Eric Smith wrote: > > Is this an appropriate forum to ask for assistance in writing > > modelines for my specific hardware above? > > Actually it's not, anyway with XFree86 4.x, you normally don't have to > worry about modelines. Knowing the frequency ranges the monitor can > handle should be enough, or is there a specific problem? Seems 4.x aint compatible with my display card, so using 3.3.6a and cannot get a resolution higher than 640 x 480 - see output below. If I try to run the fbdev server, I get a compaint that the /dev/... does not exist. Cannot achieve a higher resolution under windows either though. (If there is a more appropriate forum for me to go with this, then please advise.) XFree86 Version 3.3.6a / X Window System (protocol Version 11, revision 0, vendor release 6300) Release Date: xx November 2000 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (see http://www.XFree86.Org/FAQ) Operating System: Linux 2.4.13 i686 [ELF] Configured drivers: S3: accelerated server for S3 graphics adaptors (Patchlevel 0) newmmio, mmio_928, s3_generic (using VT number 9) F86Config: /etc/X11/XF86Config (**) stands for supplied, (--) stands for probed/default values (**) XKB: keymap: "xfree86(us)" (overrides other XKB settings) (**) Mouse: type: Microsoft, device: /dev/mouse, baudrate: 1200 (**) Mouse: buttons: 3, Chorded middle button (**) S3: Graphics device ID: "g" (**) S3: Monitor ID: "g" (--) S3: Mode "800x600" needs hsync freq of 35.16 kHz. Deleted. (--) S3: Mode "1024x768" needs hsync freq of 35.52 kHz. Deleted. (--) S3: Mode "640x400" needs hsync freq of 37.86 kHz. Deleted. (--) S3: Mode "640x480" needs hsync freq of 36.46 kHz. Deleted. (--) S3: Mode "640x480" needs hsync freq of 37.50 kHz. Deleted. (--) S3: Mode "800x600" needs hsync freq of 37.88 kHz. Deleted. (--) S3: Mode "640x480" needs hsync freq of 43.27 kHz. Deleted. (--) S3: Mode "1152x864" needs hsync freq of 43.92 kHz. Deleted. (--) S3: Mode "800x600" needs hsync freq of 48.08 kHz. Deleted. (--) S3: Mode "1024x768" needs hsync freq of 48.36 kHz. Deleted. (--) S3: Mode "640x480" needs hsync freq of 53.01 kHz. Deleted. (--) S3: Mode "1152x864" needs hsync freq of 53.51 kHz. Deleted. (--) S3: Mode "800x600" needs hsync freq of 55.84 kHz. Deleted. (--) S3: Mode "1024x768" needs hsync freq of 56.48 kHz. Deleted. (--) S3: Mode "1280x1024" needs hsync freq of 51.02 kHz. Deleted. (--) S3: Mode "800x600" needs hsync freq of 64.02 kHz. Deleted. (--) S3: Mode "1024x768" needs hsync freq of 62.50 kHz. Deleted. (--) S3: Mode "1152x864" needs hsync freq of 62.42 kHz. Deleted. (--) S3: Mode "1280x1024" needs hsync freq of 64.25 kHz. Deleted. (--) S3: Mode "1024x768" needs hsync freq of 70.24 kHz. Deleted. (--) S3: Mode "1152x864" needs hsync freq of 70.88 kHz. Deleted. (--) S3: Mode "1280x1024" needs hsync freq of 74.59 kHz. Deleted. (--) S3: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted. (--) S3: Mode "1152x864" needs hsync freq of 76.01 kHz. Deleted. (--) S3: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted. (--) S3: Mode "1024x768" needs hsync freq of 80.21 kHz. Deleted. (--) S3: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted. (--) S3: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted. (--) S3: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted. (--) S3: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted. (--) S3: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted. (--) S3: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted. (--) S3: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted. (--) S3: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted. (--) S3: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted. (--) S3: Mode "512x384" needs vert refresh rate of 77.97 Hz. Deleted. (--) S3: Mode "512x384" needs vert refresh rate of 85.09 Hz. Deleted. (--) S3: Mode "320x240" needs hsync freq of 39.38 kHz. Deleted. (--) S3: Mode "400x300" needs hsync freq of 35.16 kHz. Deleted. (--) S3: Mode "400x300" needs hsync freq of 37.88 kHz. Deleted. (--) S3: Mode "400x300" needs hsync freq of 48.08 kHz. Deleted. (--) S3: Mode "480x300" needs hsync freq of 35.16 kHz. Deleted. (--) S3: Mode "480x300" needs hsync freq of 37.80 kHz. Deleted. (--) S3: Mode "480x300" needs hsync freq of 39.56 kHz. Deleted. (--) S3: Mode "480x300" needs hsync freq of 48.00 kHz. Deleted. (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/100dpi/,/usr/X11R6/lib/X11/fonts/75dpi/" (--) S3: PCI: Trio32/64 rev 0, Linear FB @ 0xff00 (--) S3: chipset: Trio64 rev. 20 (--) S3: chipset driver: mmio_928 (--) S3: c
Re: Apple Multiscan 1705 - writing Xf86Config
On Don, 2002-02-14 at 01:55, Eric Smith wrote: > Is this an appropriate forum to ask for assistance in writing > modelines for my specific hardware above? Actually it's not, anyway with XFree86 4.x, you normally don't have to worry about modelines. Knowing the frequency ranges the monitor can handle should be enough, or is there a specific problem? -- Earthling Michel Dänzer (MrCooper)/ Debian GNU/Linux (powerpc) developer XFree86 and DRI project member / CS student, Free Software enthusiast
Re: Apple Multiscan 1705 - writing Xf86Config
On Don, 2002-02-14 at 01:55, Eric Smith wrote: > Is this an appropriate forum to ask for assistance in writing > modelines for my specific hardware above? Actually it's not, anyway with XFree86 4.x, you normally don't have to worry about modelines. Knowing the frequency ranges the monitor can handle should be enough, or is there a specific problem? -- Earthling Michel Dänzer (MrCooper)/ Debian GNU/Linux (powerpc) developer XFree86 and DRI project member / CS student, Free Software enthusiast -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]