[dpdk-dev] [RFC PATCH 6/6] ixgbe: PMD for bifurc ixgbe net device
On Wed, Nov 26, 2014 at 08:22:05AM +, Liang, Cunming wrote: > Thanks Bruce's valuable comments. > > > -Original Message- > > From: Richardson, Bruce > > Sent: Tuesday, November 25, 2014 11:01 PM > > To: Liang, Cunming > > Cc: dev at dpdk.org > > Subject: Re: [dpdk-dev] [RFC PATCH 6/6] ixgbe: PMD for bifurc ixgbe net > > device > > > > On Tue, Nov 25, 2014 at 02:48:51PM +, Liang, Cunming wrote: > > > > > > > > > > -Original Message- > > > > From: Richardson, Bruce > > > > Sent: Tuesday, November 25, 2014 10:34 PM > > > > To: Liang, Cunming > > > > Cc: dev at dpdk.org > > > > Subject: Re: [dpdk-dev] [RFC PATCH 6/6] ixgbe: PMD for bifurc ixgbe net > > device > > > > > > > > On Tue, Nov 25, 2014 at 10:11:22PM +0800, Cunming Liang wrote: > > > > > Signed-off-by: Cunming Liang > > > > > --- > > > > > lib/librte_pmd_ixgbe/Makefile | 13 +- > > > > > lib/librte_pmd_ixgbe/ixgbe_bifurcate.c | 303 > > > > + > > > > > lib/librte_pmd_ixgbe/ixgbe_bifurcate.h | 57 +++ > > > > > lib/librte_pmd_ixgbe/ixgbe_rxtx.c | 40 - > > > > > lib/librte_pmd_ixgbe/ixgbe_rxtx.h | 10 ++ > > > > > 5 files changed, 415 insertions(+), 8 deletions(-) > > > > > create mode 100644 lib/librte_pmd_ixgbe/ixgbe_bifurcate.c > > > > > create mode 100644 lib/librte_pmd_ixgbe/ixgbe_bifurcate.h > > > > > > > > > > > > > These changes are the ones that I'm not too sure about. I'd prefer if > > > > all > > > > material for the bifurcated driver be kept within the librte_pmd_bifurc > > directory. > > > [Liang, Cunming] I haven't a librte_pmd_bifurc library. > > > So far the purpose of librte_bifurc is for device scan, not used as a pmd. > > > During driver probe, depend on device id, it asks for correct pmd from > > 'librte_pmd_ixgbe, librte_pmd_i40e'. > > > > > > > Is it possible to leave ixgbe largely unmodified and simply have the new > > > > bifurcated driver pull in the needed ixgbe (and later i40e) functions at > > > > compile time i.e. refer from one Makefile to the sources in the other > > > > driver's directory? > > > [Liang, Cunming] Nice point. If we have single directory gathering all > > > direct ring > > access. > > > e.g. We have aka "librte_pmd_bifurc", inside it, we'll have bifurc_ixgbe, > > bifurc_i40e, ... > > > Each of them still depend on other libraries like > > librte_pmd_ixgbe/librte_pmd_i40e. > > > We may remove the internal dependence inside one pmd driver, but between > > libraries we add more. > > > > I'm not sure about all that. Two points: > > > > * Why would we need separate subdirectories within the bifurcated driver > > directory? > > The *only* thing that is different between an implementation of ixgbe and > > i40e > > to > > use the bifurcated driver infrastructure is the code to map between NIC > > descriptors > > and rte_mbufs. All the other code would be identical as far as I can work > > out. So > > the > > only two routines that differ are going to be the rx_burst and tx_burst > > functions. > [Liang, Cunming] Not really. If not using the fake page, we need to provide > init/start/stop case by case. > > So why not just pull in those two specific functions (or sets of functions) > > from > > their respective drivers, and keep the rest of the codebase common? > > [Liang, Cunming] I'm not sure all the rest of codebase can be common. > For rx/tx or queue_setup, we know it can, we already do it in xxx_rxtx.c. For > other ops, may not. > Even for the part we can, if we provide such common method template, it looks > like we still need to register 'ops'. > (e.g. xxx_init_shared_code, xxx_dev_tx/rx_init, xxx_dev_rxtx_start) They're > not part of eth_dev_ops. > If we consider more like enable all other DPDK ethdev API (by using ioctl > like ethtools does). > These message wrap and translation are definitely the case to put into such > common codes. > > So I agree with the idea to put more common method into librte_bifurc. > But don't think it's good to make it as a common PMD driver. > I still prefer ixgbe_bifurc.c in librte_pmd_ixgbe as an independent driver. > Per codebase common, rxtx common stuffs already done in xxx_rxtx.c. > Other common method provides by librte_bi
[dpdk-dev] [RFC PATCH 6/6] ixgbe: PMD for bifurc ixgbe net device
Signed-off-by: Cunming Liang --- lib/librte_pmd_ixgbe/Makefile | 13 +- lib/librte_pmd_ixgbe/ixgbe_bifurcate.c | 303 + lib/librte_pmd_ixgbe/ixgbe_bifurcate.h | 57 +++ lib/librte_pmd_ixgbe/ixgbe_rxtx.c | 40 - lib/librte_pmd_ixgbe/ixgbe_rxtx.h | 10 ++ 5 files changed, 415 insertions(+), 8 deletions(-) create mode 100644 lib/librte_pmd_ixgbe/ixgbe_bifurcate.c create mode 100644 lib/librte_pmd_ixgbe/ixgbe_bifurcate.h diff --git a/lib/librte_pmd_ixgbe/Makefile b/lib/librte_pmd_ixgbe/Makefile index 3588047..6867f17 100644 --- a/lib/librte_pmd_ixgbe/Makefile +++ b/lib/librte_pmd_ixgbe/Makefile @@ -37,7 +37,7 @@ include $(RTE_SDK)/mk/rte.vars.mk LIB = librte_pmd_ixgbe.a CFLAGS += -O3 -CFLAGS += $(WERROR_FLAGS) +CFLAGS += $(WERROR_FLAGS) -Wno-cast-qual ifeq ($(CC), icc) # @@ -108,10 +108,21 @@ SRCS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += ixgbe_bypass.c SRCS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += ixgbe_82599_bypass.c endif +ifeq ($(CONFIG_RTE_LIBRTE_BIFURC),y) +ifeq ($(CONFIG_RTE_EXEC_ENV_LINUXAPP),y) +SRCS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += ixgbe_bifurcate.c +endif +endif # this lib depends upon: DEPDIRS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += lib/librte_eal lib/librte_ether DEPDIRS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += lib/librte_mempool lib/librte_mbuf DEPDIRS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += lib/librte_net lib/librte_malloc +ifeq ($(CONFIG_RTE_LIBRTE_BIFURC),y) +ifeq ($(CONFIG_RTE_EXEC_ENV_LINUXAPP),y) +DEPDIRS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += lib/librte_bifurc +endif +endif + include $(RTE_SDK)/mk/rte.lib.mk diff --git a/lib/librte_pmd_ixgbe/ixgbe_bifurcate.c b/lib/librte_pmd_ixgbe/ixgbe_bifurcate.c new file mode 100644 index 000..84c445a --- /dev/null +++ b/lib/librte_pmd_ixgbe/ixgbe_bifurcate.c @@ -0,0 +1,303 @@ +/*- + * BSD LICENSE + * + * Copyright(c) 2010-2014 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "ixgbe_logs.h" +#include "ixgbe_ethdev.h" +#include "ixgbe/ixgbe_api.h" + +#include +#include +#include "ixgbe_rxtx.h" + +static int +ixgbe_dev_bfc_configure(struct rte_eth_dev *dev __rte_unused) +{ + return 0; +} + +static void +ixgbe_dev_bfc_info(struct rte_eth_dev *dev, + struct rte_eth_dev_info *dev_info) +{ + rte_bifurc_ethdev_get_info(dev, dev_info); +} + +static void +ixgbe_dev_bfc_stats_get(__rte_unused struct rte_eth_dev *dev, + __rte_unused struct rte_eth_stats *igb_stats) +{ + return; +} + +static int +ixgbe_dev_bfc_start(struct rte_eth_dev *dev) +{ + int err; + + /* initialize transmission unit */ + ixgbe_dev_tx_init(dev); + + /* This can fail when allocating mbufs for descriptor rings */ + err = ixgbe_dev_rx_init(dev); + if (err) { + PMD_INIT_LOG(ERR, "Unable to initialize RX hardware\n"); + goto error; + } + + ixgbe_dev_rxtx_start(dev); + + return 0; + +error: + PMD_INIT_LOG(ERR, "failure in ixgbe_dev_start(): %d", err); + ixgbe_dev_clear_queues(dev); + return -EIO; +} + +static void +ixgbe_dev_bfc_stop(struct rte_eth_dev *dev) +{ + unsigned
[dpdk-dev] [RFC PATCH 6/6] ixgbe: PMD for bifurc ixgbe net device
On Tue, Nov 25, 2014 at 02:48:51PM +, Liang, Cunming wrote: > > > > -Original Message- > > From: Richardson, Bruce > > Sent: Tuesday, November 25, 2014 10:34 PM > > To: Liang, Cunming > > Cc: dev at dpdk.org > > Subject: Re: [dpdk-dev] [RFC PATCH 6/6] ixgbe: PMD for bifurc ixgbe net > > device > > > > On Tue, Nov 25, 2014 at 10:11:22PM +0800, Cunming Liang wrote: > > > Signed-off-by: Cunming Liang > > > --- > > > lib/librte_pmd_ixgbe/Makefile | 13 +- > > > lib/librte_pmd_ixgbe/ixgbe_bifurcate.c | 303 > > + > > > lib/librte_pmd_ixgbe/ixgbe_bifurcate.h | 57 +++ > > > lib/librte_pmd_ixgbe/ixgbe_rxtx.c | 40 - > > > lib/librte_pmd_ixgbe/ixgbe_rxtx.h | 10 ++ > > > 5 files changed, 415 insertions(+), 8 deletions(-) > > > create mode 100644 lib/librte_pmd_ixgbe/ixgbe_bifurcate.c > > > create mode 100644 lib/librte_pmd_ixgbe/ixgbe_bifurcate.h > > > > > > > These changes are the ones that I'm not too sure about. I'd prefer if all > > material for the bifurcated driver be kept within the librte_pmd_bifurc > > directory. > [Liang, Cunming] I haven't a librte_pmd_bifurc library. > So far the purpose of librte_bifurc is for device scan, not used as a pmd. > During driver probe, depend on device id, it asks for correct pmd from > 'librte_pmd_ixgbe, librte_pmd_i40e'. > > > Is it possible to leave ixgbe largely unmodified and simply have the new > > bifurcated driver pull in the needed ixgbe (and later i40e) functions at > > compile time i.e. refer from one Makefile to the sources in the other > > driver's directory? > [Liang, Cunming] Nice point. If we have single directory gathering all direct > ring access. > e.g. We have aka "librte_pmd_bifurc", inside it, we'll have bifurc_ixgbe, > bifurc_i40e, ... > Each of them still depend on other libraries like > librte_pmd_ixgbe/librte_pmd_i40e. > We may remove the internal dependence inside one pmd driver, but between > libraries we add more. I'm not sure about all that. Two points: * Why would we need separate subdirectories within the bifurcated driver directory? The *only* thing that is different between an implementation of ixgbe and i40e to use the bifurcated driver infrastructure is the code to map between NIC descriptors and rte_mbufs. All the other code would be identical as far as I can work out. So the only two routines that differ are going to be the rx_burst and tx_burst functions. So why not just pull in those two specific functions (or sets of functions) from their respective drivers, and keep the rest of the codebase common? It's surely simpler than having the ixgbe driver having to be aware of whether it's operating in bifurcated mode or uio/vfio/nic_uio mode, to check what operations are supported or not. * It's not really an inter-library dependency - or at least not a hugely problematic one to my mind. With my proposal there is no need for the ixgbe or i40e drivers to be compiled up for the bifurcated driver to work with them. It simply makes use of the rx and tx code functions to do the mapping from descriptors to mbufs. While there will be a dependency on those functions, the nice thing is that those functions are already standardized by the ethdev API, so we don't need to worry about internal changes inside the drivers changing the APIs of those functions. /Bruce > > > My thinking is that the bifurcated driver is so significantly different in > > the way it works, and the limits on it's functionality e.g. no direct filter > > support or queue management, that it's best kept completely separate and > > only > > "borrow" the needed descriptor read/write functions from the other drivers > > as is > > needed. > > > > Just my 2c. I'm curious as to what others think. > > > > /Bruce > > > > > diff --git a/lib/librte_pmd_ixgbe/Makefile b/lib/librte_pmd_ixgbe/Makefile > > > index 3588047..6867f17 100644 > > > --- a/lib/librte_pmd_ixgbe/Makefile > > > +++ b/lib/librte_pmd_ixgbe/Makefile > > > @@ -37,7 +37,7 @@ include $(RTE_SDK)/mk/rte.vars.mk > > > LIB = librte_pmd_ixgbe.a > > > > > > CFLAGS += -O3 > > > -CFLAGS += $(WERROR_FLAGS) > > > +CFLAGS += $(WERROR_FLAGS) -Wno-cast-qual > > > > > > ifeq ($(CC), icc) > > > # > > > @@ -108,10 +108,21 @@ SRCS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += > > ixgbe_bypass.c > > > SRCS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += ixgbe_82599_bypass.c > > > endif > > > > > > +ifeq ($(CONFIG_RTE_LIBRTE_BIFURC),y) > >
[dpdk-dev] [RFC PATCH 6/6] ixgbe: PMD for bifurc ixgbe net device
> -Original Message- > From: Richardson, Bruce > Sent: Tuesday, November 25, 2014 10:34 PM > To: Liang, Cunming > Cc: dev at dpdk.org > Subject: Re: [dpdk-dev] [RFC PATCH 6/6] ixgbe: PMD for bifurc ixgbe net device > > On Tue, Nov 25, 2014 at 10:11:22PM +0800, Cunming Liang wrote: > > Signed-off-by: Cunming Liang > > --- > > lib/librte_pmd_ixgbe/Makefile | 13 +- > > lib/librte_pmd_ixgbe/ixgbe_bifurcate.c | 303 > + > > lib/librte_pmd_ixgbe/ixgbe_bifurcate.h | 57 +++ > > lib/librte_pmd_ixgbe/ixgbe_rxtx.c | 40 - > > lib/librte_pmd_ixgbe/ixgbe_rxtx.h | 10 ++ > > 5 files changed, 415 insertions(+), 8 deletions(-) > > create mode 100644 lib/librte_pmd_ixgbe/ixgbe_bifurcate.c > > create mode 100644 lib/librte_pmd_ixgbe/ixgbe_bifurcate.h > > > > These changes are the ones that I'm not too sure about. I'd prefer if all > material for the bifurcated driver be kept within the librte_pmd_bifurc > directory. [Liang, Cunming] I haven't a librte_pmd_bifurc library. So far the purpose of librte_bifurc is for device scan, not used as a pmd. During driver probe, depend on device id, it asks for correct pmd from 'librte_pmd_ixgbe, librte_pmd_i40e'. > Is it possible to leave ixgbe largely unmodified and simply have the new > bifurcated driver pull in the needed ixgbe (and later i40e) functions at > compile time i.e. refer from one Makefile to the sources in the other > driver's directory? [Liang, Cunming] Nice point. If we have single directory gathering all direct ring access. e.g. We have aka "librte_pmd_bifurc", inside it, we'll have bifurc_ixgbe, bifurc_i40e, ... Each of them still depend on other libraries like librte_pmd_ixgbe/librte_pmd_i40e. We may remove the internal dependence inside one pmd driver, but between libraries we add more. > My thinking is that the bifurcated driver is so significantly different in > the way it works, and the limits on it's functionality e.g. no direct filter > support or queue management, that it's best kept completely separate and only > "borrow" the needed descriptor read/write functions from the other drivers as > is > needed. > > Just my 2c. I'm curious as to what others think. > > /Bruce > > > diff --git a/lib/librte_pmd_ixgbe/Makefile b/lib/librte_pmd_ixgbe/Makefile > > index 3588047..6867f17 100644 > > --- a/lib/librte_pmd_ixgbe/Makefile > > +++ b/lib/librte_pmd_ixgbe/Makefile > > @@ -37,7 +37,7 @@ include $(RTE_SDK)/mk/rte.vars.mk > > LIB = librte_pmd_ixgbe.a > > > > CFLAGS += -O3 > > -CFLAGS += $(WERROR_FLAGS) > > +CFLAGS += $(WERROR_FLAGS) -Wno-cast-qual > > > > ifeq ($(CC), icc) > > # > > @@ -108,10 +108,21 @@ SRCS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += > ixgbe_bypass.c > > SRCS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += ixgbe_82599_bypass.c > > endif > > > > +ifeq ($(CONFIG_RTE_LIBRTE_BIFURC),y) > > +ifeq ($(CONFIG_RTE_EXEC_ENV_LINUXAPP),y) > > +SRCS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += ixgbe_bifurcate.c > > +endif > > +endif > > > > # this lib depends upon: > > DEPDIRS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += lib/librte_eal > lib/librte_ether > > DEPDIRS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += lib/librte_mempool > lib/librte_mbuf > > DEPDIRS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += lib/librte_net > lib/librte_malloc > > +ifeq ($(CONFIG_RTE_LIBRTE_BIFURC),y) > > +ifeq ($(CONFIG_RTE_EXEC_ENV_LINUXAPP),y) > > +DEPDIRS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += lib/librte_bifurc > > +endif > > +endif > > + > > > > include $(RTE_SDK)/mk/rte.lib.mk > > diff --git a/lib/librte_pmd_ixgbe/ixgbe_bifurcate.c > b/lib/librte_pmd_ixgbe/ixgbe_bifurcate.c > > new file mode 100644 > > index 000..84c445a > > --- /dev/null > > +++ b/lib/librte_pmd_ixgbe/ixgbe_bifurcate.c > > @@ -0,0 +1,303 @@ > > +/*- > > + * BSD LICENSE > > + * > > + * Copyright(c) 2010-2014 Intel Corporation. All rights reserved. > > + * All rights reserved. > > + * > > + * Redistribution and use in source and binary forms, with or without > > + * modification, are permitted provided that the following conditions > > + * are met: > > + * > > + * * Redistributions of source code must retain the above copyright > > + * notice, this list of conditions and the following disclaimer. > > + * * Redistributions in binary form must reproduce the above copyright > > + * notice, this list of conditions and the following disclaimer in > > + * the documentation and/or other materials provided with the > > +
[dpdk-dev] [RFC PATCH 6/6] ixgbe: PMD for bifurc ixgbe net device
On Tue, Nov 25, 2014 at 10:11:22PM +0800, Cunming Liang wrote: > Signed-off-by: Cunming Liang > --- > lib/librte_pmd_ixgbe/Makefile | 13 +- > lib/librte_pmd_ixgbe/ixgbe_bifurcate.c | 303 > + > lib/librte_pmd_ixgbe/ixgbe_bifurcate.h | 57 +++ > lib/librte_pmd_ixgbe/ixgbe_rxtx.c | 40 - > lib/librte_pmd_ixgbe/ixgbe_rxtx.h | 10 ++ > 5 files changed, 415 insertions(+), 8 deletions(-) > create mode 100644 lib/librte_pmd_ixgbe/ixgbe_bifurcate.c > create mode 100644 lib/librte_pmd_ixgbe/ixgbe_bifurcate.h > These changes are the ones that I'm not too sure about. I'd prefer if all material for the bifurcated driver be kept within the librte_pmd_bifurc directory. Is it possible to leave ixgbe largely unmodified and simply have the new bifurcated driver pull in the needed ixgbe (and later i40e) functions at compile time i.e. refer from one Makefile to the sources in the other driver's directory? My thinking is that the bifurcated driver is so significantly different in the way it works, and the limits on it's functionality e.g. no direct filter support or queue management, that it's best kept completely separate and only "borrow" the needed descriptor read/write functions from the other drivers as is needed. Just my 2c. I'm curious as to what others think. /Bruce > diff --git a/lib/librte_pmd_ixgbe/Makefile b/lib/librte_pmd_ixgbe/Makefile > index 3588047..6867f17 100644 > --- a/lib/librte_pmd_ixgbe/Makefile > +++ b/lib/librte_pmd_ixgbe/Makefile > @@ -37,7 +37,7 @@ include $(RTE_SDK)/mk/rte.vars.mk > LIB = librte_pmd_ixgbe.a > > CFLAGS += -O3 > -CFLAGS += $(WERROR_FLAGS) > +CFLAGS += $(WERROR_FLAGS) -Wno-cast-qual > > ifeq ($(CC), icc) > # > @@ -108,10 +108,21 @@ SRCS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += ixgbe_bypass.c > SRCS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += ixgbe_82599_bypass.c > endif > > +ifeq ($(CONFIG_RTE_LIBRTE_BIFURC),y) > +ifeq ($(CONFIG_RTE_EXEC_ENV_LINUXAPP),y) > +SRCS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += ixgbe_bifurcate.c > +endif > +endif > > # this lib depends upon: > DEPDIRS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += lib/librte_eal lib/librte_ether > DEPDIRS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += lib/librte_mempool lib/librte_mbuf > DEPDIRS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += lib/librte_net lib/librte_malloc > +ifeq ($(CONFIG_RTE_LIBRTE_BIFURC),y) > +ifeq ($(CONFIG_RTE_EXEC_ENV_LINUXAPP),y) > +DEPDIRS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += lib/librte_bifurc > +endif > +endif > + > > include $(RTE_SDK)/mk/rte.lib.mk > diff --git a/lib/librte_pmd_ixgbe/ixgbe_bifurcate.c > b/lib/librte_pmd_ixgbe/ixgbe_bifurcate.c > new file mode 100644 > index 000..84c445a > --- /dev/null > +++ b/lib/librte_pmd_ixgbe/ixgbe_bifurcate.c > @@ -0,0 +1,303 @@ > +/*- > + * BSD LICENSE > + * > + * Copyright(c) 2010-2014 Intel Corporation. All rights reserved. > + * All rights reserved. > + * > + * Redistribution and use in source and binary forms, with or without > + * modification, are permitted provided that the following conditions > + * are met: > + * > + * * Redistributions of source code must retain the above copyright > + * notice, this list of conditions and the following disclaimer. > + * * Redistributions in binary form must reproduce the above copyright > + * notice, this list of conditions and the following disclaimer in > + * the documentation and/or other materials provided with the > + * distribution. > + * * Neither the name of Intel Corporation nor the names of its > + * contributors may be used to endorse or promote products derived > + * from this software without specific prior written permission. > + * > + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS > + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT > + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR > + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT > + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, > + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT > + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, > + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY > + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT > + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE > + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. > + */ > + > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +#include "ixgbe_logs.h" > +#include "ixgbe_ethdev.h" > +#include "ixgbe/ixgbe_api.h" > + > +#include > +#include > +#include "ixgbe_rxtx.h" > + > +static int >