Re: [slim] Logitech Media Server 7.7.3 released
lrossouw wrote: > Also tried upgrading via repository (debian) and did not find the new > version. This is they way I did it in the past. I'm also waiting for the updated repository. ---- wotuzu17's Profile: http://forums.slimdevices.com/member.php?userid=7376 View this thread: http://forums.slimdevices.com/showthread.php?t=99452 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] why is the sb3 remote SO unreliable?
I haven't read all the post, but I remember having a similar problem. It turned out that on my IR remote one solder pad of the LED was broken. That bad contact caused the Squeezebox not accepting commands from the remote sometimes. I opened the remote, resoldered the LED, and I'm happy ever since. -- wotuzu17 ---- wotuzu17's Profile: http://forums.slimdevices.com/member.php?userid=7376 View this thread: http://forums.slimdevices.com/showthread.php?t=62422 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] SB3 remote on the blink???
I had a similar experience with my remote. In my case it was a broken solder pad at one pin of the infrared diode. I opened the remote, resoldered it and it works perfect now. -- wotuzu17 wotuzu17's Profile: http://forums.slimdevices.com/member.php?userid=7376 View this thread: http://forums.slimdevices.com/showthread.php?t=55481 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/lists/listinfo/discuss
Re: [slim] SB3 remote control getting physically weary?
remove batteries then check for screws. There are no screws on my remote. With a small slotted screwdriver carefully try to part the upper half from the bottom half. I couldn't do it without creating scuffs on the plastic-surface but if you are manual-skilled and patient it may work without. -- wotuzu17 wotuzu17's Profile: http://forums.slimdevices.com/member.php?userid=7376 View this thread: http://forums.slimdevices.com/showthread.php?t=54909 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/lists/listinfo/discuss
Re: [slim] SB3 remote control getting physically weary?
hirschaj;358539 Wrote: > I had a problem where my remote would work very erratically and only > work with certain keys. The problem was with the solder joint on the IR > emitter. I opened up the remote and closely inspected where the IR > emitter prongs attach to the circuit board and sure enough there was a > crack in one of the joints. Re-soldering these prongs did the trick and > my remote has worked great ever since. I just read your post and aut of curiosity opened my troublesome remote- and its exactly as you described ! One of the solder pads of the IR- diode is broken, you can move the wire in the hole when you touch the diode. I will re- solder it and hope it solves the problem. Thanks for your hint! -- wotuzu17 ---- wotuzu17's Profile: http://forums.slimdevices.com/member.php?userid=7376 View this thread: http://forums.slimdevices.com/showthread.php?t=54909 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/lists/listinfo/discuss
Re: [slim] SB3 remote control getting physically weary?
I have got 2 Squeezeboxes: One older one with the Slimdevices Logo and one with the Logitech Logo. The were shipped with different IR- remotes. The old one contains AAA batteries while the new on works with AA batteries. The old IR- remote doesn't work fine anymore. Some buttons are not always responding and some are as good as dead. The arrow down and the sleep button are the worst. First I thought about a software problem caused by an upgrade, but the new- design remote works fine on both squeezeboxes. -- wotuzu17 wotuzu17's Profile: http://forums.slimdevices.com/member.php?userid=7376 View this thread: http://forums.slimdevices.com/showthread.php?t=54909 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/lists/listinfo/discuss
Re: [slim] Still possible to buy SlimDevices (not Logitech) SB3 in UK?
I also bought my second Squeezebox on ebay from an german dealer. The description showed the Slimdevices style, and was priced higher than other offers of the SB with the new Logitech logo. However, I got one with Logitech on it. Well, I will get used to it. -- wotuzu17 wotuzu17's Profile: http://forums.slimdevices.com/member.php?userid=7376 View this thread: http://forums.slimdevices.com/showthread.php?t=36850 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/lists/listinfo/discuss
Re: [slim] Logitech Logo
@mvalera: I think the actual slimdevices.com page is very good alread. It will be a tought job to make it even better. -- wotuzu17 wotuzu17's Profile: http://forums.slimdevices.com/member.php?userid=7376 View this thread: http://forums.slimdevices.com/showthread.php?t=36881 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/lists/listinfo/discuss
Re: [slim] very slow response time when browsing genres
I'd like to add that all other ways of browsing are AMAZINGLY FAST. Way faster than at my 6.3 installation. Only broswing for genres that contains lots of albums in my database like Rock and Pop take INSANELY long time. Therefore I assume that it is not about my relatively weak hardware, nor about the setup of the mysql server, but a inefficient way of querying the server for genres, that results in high CPU load and that ludicrous response times. How does your slimserver6.5.3 installation react? I use the workaround of browsing for Music Folders, since my folders are organized in Genres. -- wotuzu17 wotuzu17's Profile: http://forums.slimdevices.com/member.php?userid=7376 View this thread: http://forums.slimdevices.com/showthread.php?t=36776 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/lists/listinfo/discuss
Re: [slim] very slow response time when browsing genres
Here are the relevant settings in /etc/my.cnf: [mysqld] innodb port= 3306 socket = /var/lib/mysql/mysql.sock skip-locking innodb_fast_shutdown = 1 max_connections = 4 thread_concurrency= 4 key_buffer = 32M max_allowed_packet = 1M table_cache = 256 sort_buffer_size = 2M net_buffer_length = 8K read_buffer_size = 256K read_rnd_buffer_size = 512K myisam_sort_buffer_size = 16M [...] # Uncomment the following if you are using InnoDB tables innodb_data_home_dir = /var/lib/mysql/ innodb_data_file_path = ibdata1:10M:autoextend innodb_log_group_home_dir = /var/lib/mysql/ innodb_log_arch_dir = /var/lib/mysql/ # You can set .._buffer_pool_size up to 50 - 80 % # of RAM but beware of setting memory usage too high innodb_buffer_pool_size = 32M innodb_additional_mem_pool_size = 2M # Set .._log_file_size to 25 % of buffer pool size innodb_log_file_size = 5M innodb_log_buffer_size = 8M innodb_flush_log_at_trx_commit = 1 innodb_lock_wait_timeout = 50 [...] -- wotuzu17 wotuzu17's Profile: http://forums.slimdevices.com/member.php?userid=7376 View this thread: http://forums.slimdevices.com/showthread.php?t=36776 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/lists/listinfo/discuss
[slim] very slow response time when browsing genres
Hi, I just upgraded Slimserver 6.3 to 6.5.3, using the Suse10.1 system's mysql server. My Server is a VIA C3 / 1Ghz 256MB my music consists of 1400 albums with 18434 songs by 560 artists. Basically everything works fine so far, only when I browse my music for genres, the cpu load goes to 100% for minutes. When I check the top command, I see that mysqld is using all the CPU power. For example, when I click on the rock genre, which contains 642 albums, I need to wait 6 minutes for a reaction. In the meantime, the music on my squeezebox stops due to the heavy cpu load. The old version 6.3 needed 5 seconds for the same request. Interestingly, browsing via the IR Control Search->Genres->Rock is going very fast. I already experimented with increasing buffer values in /etc/my.cnf, but that doesn't help much. I'd be happy for comments, especially from Michael since he seems to use the same hardware as I do. -- wotuzu17 wotuzu17's Profile: http://forums.slimdevices.com/member.php?userid=7376 View this thread: http://forums.slimdevices.com/showthread.php?t=36776 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/lists/listinfo/discuss
Re: [slim] Upgrade 6.3.1 to 6.5.1 -> slimserver doesn't start
ok, I'm tired to search for the solution. 6.3.1 is back on my system. I doubt that 6.5.1 is runnable at all. Never change a running system! -- wotuzu17 wotuzu17's Profile: http://forums.slimdevices.com/member.php?userid=7376 View this thread: http://forums.slimdevices.com/showthread.php?t=34472 ___ discuss mailing list [EMAIL PROTECTED] http://lists.slimdevices.com/lists/listinfo/discuss
Re: [slim] Upgrade 6.3.1 to 6.5.1 -> slimserver doesn't start
86-linux/mysqld --defaults-file=/var/tmp/slimserver/my.cnf 1001 5103 1 0 16:55 ?00:00:00 /usr/local/slimserver/Bin/i386-linux/mysqld --defaults-file=/var/tmp/slimserver/my.cnf 1001 5104 1 0 16:55 ?00:00:00 /usr/local/slimserver/Bin/i386-linux/mysqld --defaults-file=/var/tmp/slimserver/my.cnf 1001 5105 1 0 16:55 ?00:00:00 /usr/local/slimserver/Bin/i386-linux/mysqld --defaults-file=/var/tmp/slimserver/my.cnf 1001 5106 1 0 16:55 ?00:00:00 /usr/local/slimserver/Bin/i386-linux/mysqld --defaults-file=/var/tmp/slimserver/my.cnf postfix 5509 2275 0 17:01 ?00:00:00 qmgr -l -t fifo -u postfix 5510 2275 0 17:01 ?00:00:00 pickup -l -t fifo -u root 5843 1 0 17:09 pts/000:00:00 /bin/sh /usr/bin/mysqld_safe --user=mysql --pid-file=/var/lib/mysql/mysqld.pid --socket=/var/lib/mysql/mysql. mysql 5879 5843 0 17:09 pts/000:00:00 /usr/sbin/mysqld --basedir=/usr --datadir=/var/lib/mysql --user=mysql --pid-file=/var/lib/mysql/mysqld.pid -- root 5971 4978 0 17:15 pts/000:00:00 ps -eaf -- wotuzu17 ---- wotuzu17's Profile: http://forums.slimdevices.com/member.php?userid=7376 View this thread: http://forums.slimdevices.com/showthread.php?t=34472 ___ discuss mailing list [EMAIL PROTECTED] http://lists.slimdevices.com/lists/listinfo/discuss
Re: [slim] Upgrade 6.3.1 to 6.5.1 -> slimserver doesn't start
I couldn't solve the problem yet. I tried to remove the rpm package, but that also failed with some strange error message: music:/var/tmp/slimserver # rpm -e slimserver slimserver: unknown service error: %preun(slimserver-6.5.1-1.noarch) scriptlet failed, exit status 1 I'm a bit frustrated now... -- wotuzu17 ---- wotuzu17's Profile: http://forums.slimdevices.com/member.php?userid=7376 View this thread: http://forums.slimdevices.com/showthread.php?t=34472 ___ discuss mailing list [EMAIL PROTECTED] http://lists.slimdevices.com/lists/listinfo/discuss
Re: [slim] Upgrade 6.3.1 to 6.5.1 -> slimserver doesn't start
I haven't changed the config files from my perfectly working 6.3.1 installation: music:/# cat /etc/sysconfig/slimserver # Edit this to suit your setup SLIMSERVER_USER="slimserver" SLIMSERVER_HOME="/usr/local/slimserver" SLIMSERVER_CFG="/etc/slimserver.conf" SLIMSERVER_LOG="/tmp/slimserver.log" SLIMSERVER_ARGS="--daemon --logfile=$SLIMSERVER_LOG --user $SLIMSERVER_USER --group slimserver --prefsfile=$SLIMSERVER_CFG --cachedir /var/tmp/slimserver" PID_FILE="/var/run/slimserver.pid" NICE_VALUE="-3" music:/etc/init.d # cat /etc/init.d/slimserver.init #!/bin/sh # # slimserver.init This shell script takes care of starting and stopping # the Slim streaming MP3 server. # # chkconfig: 345 80 30 # description: Slim streaming MP3 server # processname: slimserver.pl # config: /etc/slimserver.conf if [ -f /etc/sysconfig/slimserver ]; then . /etc/sysconfig/slimserver fi . /etc/rc.status rc_reset RETVAL=0 prog="SLIMSERVER" SLIMSERVER_BIN="$SLIMSERVER_HOME/slimserver.pl" [ -x $SLIMSERVER_BIN -a -f $SLIMSERVER_CFG ] || RETVAL=5 case "$1" in start) echo -n "Starting SlimServer: " checkproc -p ${PID_FILE} ${SLIMSERVER_BIN} case $? in 0) echo -n "- Warning: daemon already running. " ;; 1) echo -n "- Warning: ${PID_FILE} exists. " ;; esac startproc -n ${NICE_VALUE} -p ${PID_FILE} ${SLIMSERVER_BIN} ${SLIMSERVER_ARGS} rc_status -v ;; stop) echo -n "Shutting down SlimServer: " kill `pidof -x slimserver.pl` rc_status -v ;; status) echo -n "Checking for slimserver daemon " checkproc -p ${PID_FILE} ${SLIMSERVER_BIN} rc_status -v ;; esac exit ${RETVAL} -- wotuzu17 wotuzu17's Profile: http://forums.slimdevices.com/member.php?userid=7376 View this thread: http://forums.slimdevices.com/showthread.php?t=34472 ___ discuss mailing list [EMAIL PROTECTED] http://lists.slimdevices.com/lists/listinfo/discuss
[slim] Upgrade 6.3.1 to 6.5.1 -> slimserver doesn't start
Hello, I just tried to upgrade slimserver on my Suse 10.1 to 6.5.1(the official version) when I try to start slimserver with the /etc/init.d/slimserver.,init start script, the process starts and stops after 2 seconds, leaving an error message in the logfile. cat /tmp/slimserver.log 2007-04-14 19:27:39.9550 Warning: Migrating from 6.3.x used with MySQL! Database error: Can't create table './slimserver/years.frm' (errno: 121) at /usr/local/slimserver/CPAN/DBIx/Migration.pm line 115. Anybody have suggestions what to do to fix the problem? -- wotuzu17 ---- wotuzu17's Profile: http://forums.slimdevices.com/member.php?userid=7376 View this thread: http://forums.slimdevices.com/showthread.php?t=34472 ___ discuss mailing list [EMAIL PROTECTED] http://lists.slimdevices.com/lists/listinfo/discuss
[slim] Re: Open Source Dream Falls Apart?
Logitech- keep it open source or I'll be angry ! -- wotuzu17 wotuzu17's Profile: http://forums.slimdevices.com/member.php?userid=7376 View this thread: http://forums.slimdevices.com/showthread.php?t=28873 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/lists/listinfo/discuss
[slim] Re: Tons of Problems with 6.5
I had the problems with the noise at the beginning of tracks too, and I opened a Bug Ticket http://bugs.slimdevices.com/show_bug.cgi?id=4312 I edited the tags of some of my mp3's with mp3tag_v2.36a, and I believe the problem occurs only at tracks that are edited with that program. Perhaps it doesn't write Tags properly. Later on my server crashed, and the top command showed me 99% cpu load for the mysql daemon. I agree that there is still a lot work to do to fix all the problems. My "productive system" is back at 6.3.1, too. -- wotuzu17 ---- wotuzu17's Profile: http://forums.slimdevices.com/member.php?userid=7376 View this thread: http://forums.slimdevices.com/showthread.php?t=28416 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/lists/listinfo/discuss
[slim] Squeezebox for me - Softsqueeze for the neighbours
Hello Community, I've just installed slimserver 6.3.1 on my linux computer and set up the squeezebox in my living room. Everything works fine so far. I would like to grant my neighbours, who use the same W-LAN, access to my music library. The should be able to listen to their Softsqueezes, but they should NOT be able to accidentally control my squeezbox. Is there a feature in slimserver to give permissions for multiple users? Does it make sense to run more than one instance of slimserver, that are listening to different ports (e.g 9000, 9001) ? Thanks, Andreas from Austria -- wotuzu17 wotuzu17's Profile: http://forums.slimdevices.com/member.php?userid=7376 View this thread: http://forums.slimdevices.com/showthread.php?t=27173 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/lists/listinfo/discuss