Re: enabling kms for i915 disables brightness control and xrandr
On Mon, 2009-03-30 at 14:34 -0700, Jesse Barnes wrote: > On Mon, 30 Mar 2009 15:37:19 +0200 > Soeren Sonnenburg wrote: > > > On Sun, 2009-03-29 at 15:22 +0200, Soeren Sonnenburg wrote: > > > On Sun, 2009-03-29 at 14:07 +0100, Sitsofe Wheeler wrote: > > > > (CC'ing dri-devel, Eric Anholt and Jesse Barnes) > > > > > > > > On Sun, Mar 29, 2009 at 12:34:01PM +0200, Soeren Sonnenburg wrote: > > > > > Dear all, > > > > > > > > > > I am not sure if this is just a user error/ too old userspace > > > > > problem, > > > > > > > > [User stated that 2.6.3 intel driver is being used in another > > > > email] > > > > > > Just to not cause any (further?) confusion, I was using 2.6.1 when I > > > wrote that email and after compiling/upgrading to 2.6.3 a number of > > > problems vanished (like Xv works, screen resolution is correct, > > > things are *a lot* faster with UXA). However, brightness still only > > > works via setpci and xrandr only shows the 1024x600 modeline. > > > > > > > > but I recognized that when I enable kernel based modesetting on > > > > > a intel 945 based samsung nc 10 netbook, I loose brightness > > > > > control from within X and X resolutions are wrong (instead of > > > > > 1024x600 it is 1024x1024) and xrandr does no longer have the > > > > > all the modelines ranging from 1024x600 to 640x350... Trying to > > > > > change resolutions / setting the brightness via xrandr results > > > > > in error messages being printed. > > > > > > > > > > Furthermore, this same flag disables Xv support.. > > > > > > > > > > However, screen switches between terminal and X are quite fast > > > > > now (without any flicker) and suspend and everything works > > > > > stably. > > > > > > > > > > I recognized that I can set the brightness via > > > > > > > > > > setpci -s 00:02.1 F4.B=XX > > > > > > > > > > (XX ranging from 00 to FF) just fine... > > > > One more thing: Connecting an external display I could turn it on via > > xrandr --auto successfully. However, it was not possible to turn the > > internal display off (xrandr --output LVDS1 --off) and switching to > > the console with the external display connected I managed to freeze > > the machine. Turning the external display off worked somehow (the > > display then showed vertical stripes) but I could switch to console. > > Have you filed bugs for these problems? I think the brightness control > issue is due to some missing bits on the 2D side (we don't enable > backlight property control when KMS is active, but should), the other > issues sound like bugs. I did nothing besides asking here on lkml. Where should I report what? Soeren -- For the one fact about the future of which we can be certain is that it will be utterly fantastic. -- Arthur C. Clarke, 1962 -- -- ___ Dri-devel mailing list Dri-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/dri-devel
Re: enabling kms for i915 disables brightness control and xrandr
On Tue, 31 Mar 2009 00:57:50 +0200 Soeren Sonnenburg wrote: > On Mon, 2009-03-30 at 14:34 -0700, Jesse Barnes wrote: > > On Mon, 30 Mar 2009 15:37:19 +0200 > > Soeren Sonnenburg wrote: > > > > > On Sun, 2009-03-29 at 15:22 +0200, Soeren Sonnenburg wrote: > > > > On Sun, 2009-03-29 at 14:07 +0100, Sitsofe Wheeler wrote: > > > > > (CC'ing dri-devel, Eric Anholt and Jesse Barnes) > > > > > > > > > > On Sun, Mar 29, 2009 at 12:34:01PM +0200, Soeren Sonnenburg > > > > > wrote: > > > > > > Dear all, > > > > > > > > > > > > I am not sure if this is just a user error/ too old > > > > > > userspace problem, > > > > > > > > > > [User stated that 2.6.3 intel driver is being used in another > > > > > email] > > > > > > > > Just to not cause any (further?) confusion, I was using 2.6.1 > > > > when I wrote that email and after compiling/upgrading to 2.6.3 > > > > a number of problems vanished (like Xv works, screen resolution > > > > is correct, things are *a lot* faster with UXA). However, > > > > brightness still only works via setpci and xrandr only shows > > > > the 1024x600 modeline. > > > > > > > > > > but I recognized that when I enable kernel based > > > > > > modesetting on a intel 945 based samsung nc 10 netbook, I > > > > > > loose brightness control from within X and X resolutions > > > > > > are wrong (instead of 1024x600 it is 1024x1024) and xrandr > > > > > > does no longer have the all the modelines ranging from > > > > > > 1024x600 to 640x350... Trying to change resolutions / > > > > > > setting the brightness via xrandr results in error messages > > > > > > being printed. > > > > > > > > > > > > Furthermore, this same flag disables Xv support.. > > > > > > > > > > > > However, screen switches between terminal and X are quite > > > > > > fast now (without any flicker) and suspend and everything > > > > > > works stably. > > > > > > > > > > > > I recognized that I can set the brightness via > > > > > > > > > > > > setpci -s 00:02.1 F4.B=XX > > > > > > > > > > > > (XX ranging from 00 to FF) just fine... > > > > > > One more thing: Connecting an external display I could turn it on > > > via xrandr --auto successfully. However, it was not possible to > > > turn the internal display off (xrandr --output LVDS1 --off) and > > > switching to the console with the external display connected I > > > managed to freeze the machine. Turning the external display off > > > worked somehow (the display then showed vertical stripes) but I > > > could switch to console. > > > > Have you filed bugs for these problems? I think the brightness > > control issue is due to some missing bits on the 2D side (we don't > > enable backlight property control when KMS is active, but should), > > the other issues sound like bugs. > > I did nothing besides asking here on lkml. Where should I report what? Your xrandr problems should be reported at bugs.freedesktop.org against the xf86-video-intel driver (in the xorg component). A separate bug report should be filed for the missing backlight property. Thanks, -- Jesse Barnes, Intel Open Source Technology Center -- -- ___ Dri-devel mailing list Dri-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/dri-devel
Re: enabling kms for i915 disables brightness control and xrandr
On Mon, 30 Mar 2009 15:37:19 +0200 Soeren Sonnenburg wrote: > On Sun, 2009-03-29 at 15:22 +0200, Soeren Sonnenburg wrote: > > On Sun, 2009-03-29 at 14:07 +0100, Sitsofe Wheeler wrote: > > > (CC'ing dri-devel, Eric Anholt and Jesse Barnes) > > > > > > On Sun, Mar 29, 2009 at 12:34:01PM +0200, Soeren Sonnenburg wrote: > > > > Dear all, > > > > > > > > I am not sure if this is just a user error/ too old userspace > > > > problem, > > > > > > [User stated that 2.6.3 intel driver is being used in another > > > email] > > > > Just to not cause any (further?) confusion, I was using 2.6.1 when I > > wrote that email and after compiling/upgrading to 2.6.3 a number of > > problems vanished (like Xv works, screen resolution is correct, > > things are *a lot* faster with UXA). However, brightness still only > > works via setpci and xrandr only shows the 1024x600 modeline. > > > > > > but I recognized that when I enable kernel based modesetting on > > > > a intel 945 based samsung nc 10 netbook, I loose brightness > > > > control from within X and X resolutions are wrong (instead of > > > > 1024x600 it is 1024x1024) and xrandr does no longer have the > > > > all the modelines ranging from 1024x600 to 640x350... Trying to > > > > change resolutions / setting the brightness via xrandr results > > > > in error messages being printed. > > > > > > > > Furthermore, this same flag disables Xv support.. > > > > > > > > However, screen switches between terminal and X are quite fast > > > > now (without any flicker) and suspend and everything works > > > > stably. > > > > > > > > I recognized that I can set the brightness via > > > > > > > > setpci -s 00:02.1 F4.B=XX > > > > > > > > (XX ranging from 00 to FF) just fine... > > One more thing: Connecting an external display I could turn it on via > xrandr --auto successfully. However, it was not possible to turn the > internal display off (xrandr --output LVDS1 --off) and switching to > the console with the external display connected I managed to freeze > the machine. Turning the external display off worked somehow (the > display then showed vertical stripes) but I could switch to console. Have you filed bugs for these problems? I think the brightness control issue is due to some missing bits on the 2D side (we don't enable backlight property control when KMS is active, but should), the other issues sound like bugs. -- Jesse Barnes, Intel Open Source Technology Center -- -- ___ Dri-devel mailing list Dri-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/dri-devel
Re: enabling kms for i915 disables brightness control and xrandr
On Sun, 2009-03-29 at 15:22 +0200, Soeren Sonnenburg wrote: > On Sun, 2009-03-29 at 14:07 +0100, Sitsofe Wheeler wrote: > > (CC'ing dri-devel, Eric Anholt and Jesse Barnes) > > > > On Sun, Mar 29, 2009 at 12:34:01PM +0200, Soeren Sonnenburg wrote: > > > Dear all, > > > > > > I am not sure if this is just a user error/ too old userspace problem, > > > > [User stated that 2.6.3 intel driver is being used in another email] > > Just to not cause any (further?) confusion, I was using 2.6.1 when I > wrote that email and after compiling/upgrading to 2.6.3 a number of > problems vanished (like Xv works, screen resolution is correct, things > are *a lot* faster with UXA). However, brightness still only works via > setpci and xrandr only shows the 1024x600 modeline. > > > > but I recognized that when I enable kernel based modesetting on a intel > > > 945 based samsung nc 10 netbook, I loose brightness control from within > > > X and X resolutions are wrong (instead of 1024x600 it is 1024x1024) and > > > xrandr does no longer have the all the modelines ranging from 1024x600 > > > to 640x350... Trying to change resolutions / setting the brightness via > > > xrandr results in error messages being printed. > > > > > > Furthermore, this same flag disables Xv support.. > > > > > > However, screen switches between terminal and X are quite fast now > > > (without any flicker) and suspend and everything works stably. > > > > > > I recognized that I can set the brightness via > > > > > > setpci -s 00:02.1 F4.B=XX > > > > > > (XX ranging from 00 to FF) just fine... One more thing: Connecting an external display I could turn it on via xrandr --auto successfully. However, it was not possible to turn the internal display off (xrandr --output LVDS1 --off) and switching to the console with the external display connected I managed to freeze the machine. Turning the external display off worked somehow (the display then showed vertical stripes) but I could switch to console. Soeren. -- For the one fact about the future of which we can be certain is that it will be utterly fantastic. -- Arthur C. Clarke, 1962 -- -- ___ Dri-devel mailing list Dri-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/dri-devel
Re: enabling kms for i915 disables brightness control and xrandr
(CC'ing dri-devel, Eric Anholt and Jesse Barnes) On Sun, Mar 29, 2009 at 12:34:01PM +0200, Soeren Sonnenburg wrote: > Dear all, > > I am not sure if this is just a user error/ too old userspace problem, [User stated that 2.6.3 intel driver is being used in another email] > but I recognized that when I enable kernel based modesetting on a intel > 945 based samsung nc 10 netbook, I loose brightness control from within > X and X resolutions are wrong (instead of 1024x600 it is 1024x1024) and > xrandr does no longer have the all the modelines ranging from 1024x600 > to 640x350... Trying to change resolutions / setting the brightness via > xrandr results in error messages being printed. > > Furthermore, this same flag disables Xv support.. > > However, screen switches between terminal and X are quite fast now > (without any flicker) and suspend and everything works stably. > > I recognized that I can set the brightness via > > setpci -s 00:02.1 F4.B=XX > > (XX ranging from 00 to FF) just fine... > > I am attaching the .config . > > Any ideas? > Soeren -- Sitsofe | http://sucs.org/~sits/ -- -- ___ Dri-devel mailing list Dri-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/dri-devel
Re: enabling kms for i915 disables brightness control and xrandr
On Sun, 2009-03-29 at 14:07 +0100, Sitsofe Wheeler wrote: > (CC'ing dri-devel, Eric Anholt and Jesse Barnes) > > On Sun, Mar 29, 2009 at 12:34:01PM +0200, Soeren Sonnenburg wrote: > > Dear all, > > > > I am not sure if this is just a user error/ too old userspace problem, > > [User stated that 2.6.3 intel driver is being used in another email] Just to not cause any (further?) confusion, I was using 2.6.1 when I wrote that email and after compiling/upgrading to 2.6.3 a number of problems vanished (like Xv works, screen resolution is correct, things are *a lot* faster with UXA). However, brightness still only works via setpci and xrandr only shows the 1024x600 modeline. > > but I recognized that when I enable kernel based modesetting on a intel > > 945 based samsung nc 10 netbook, I loose brightness control from within > > X and X resolutions are wrong (instead of 1024x600 it is 1024x1024) and > > xrandr does no longer have the all the modelines ranging from 1024x600 > > to 640x350... Trying to change resolutions / setting the brightness via > > xrandr results in error messages being printed. > > > > Furthermore, this same flag disables Xv support.. > > > > However, screen switches between terminal and X are quite fast now > > (without any flicker) and suspend and everything works stably. > > > > I recognized that I can set the brightness via > > > > setpci -s 00:02.1 F4.B=XX > > > > (XX ranging from 00 to FF) just fine... Soeren. -- For the one fact about the future of which we can be certain is that it will be utterly fantastic. -- Arthur C. Clarke, 1962 -- -- ___ Dri-devel mailing list Dri-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/dri-devel