24.03.2014 01:18, Aaro Koskinen пишет:
> Hi,
>
> On Sat, Mar 22, 2014 at 01:13:52PM +0400, Sergey Popov wrote:
>> scsi 0:0:0:0: Direct-Access SanDisk Cruzer Facet 1.26 PQ: 0 ANSI: 5
>> sd 0:0:0:0: [sda] 15633408 512-byte logical blocks: (8.00 GB/7.45 GiB)
>> usb 1-1: reset high-speed USB device number 2 using OcteonUSB
>> usb 1-1: reset high-speed USB device number 2 using OcteonUSB
>> usb 1-1: device descriptor read/64, error -145
>
> Can you boot with PRINTK_TIME and USB_STORAGE_DEBUG enabled and send
> the logs?
>
> A.
>
Hi again. I am very sorry, your email someway lost, probably due to
misconfiguration of my MUA.
I have attached new boot log, kernel(now - 3.15_rc2) is configured with
PRINTK_TIME and USB_STORAGE_DEBUG as you requested.
--
Best regards, Sergey Popov
Gentoo developer
Gentoo Desktop-effects project lead
Gentoo Qt project lead
Gentoo Proxy maintainers project lead
U-Boot 1.1.1 (UBNT Build ID: 4493936-g009d77b) (Build time: Sep 20 2012 -
15:48:51)
BIST check passed.
UBNT_E100 r1:2, r2:12, serial #: DC9FDB29E401
Core clock: 500 MHz, DDR clock: 266 MHz (532 Mhz data rate)
DRAM: 512 MB
Clearing DRAM... done
Flash: 4 MB
Net: octeth0, octeth1, octeth2
USB: (port 0) scanning bus for devices... 1 USB Devices found
scanning bus for storage devices...
Device 0: Vendor: SanDisk Prod.: Cruzer Facet Rev: 1.26
Type: Removable Hard Disk
Capacity: 7633.5 MB = 7.4 GB (15633408 x 512)
0
reading vmlinux.64
...
.
..
10988919 bytes read
argv[2]: coremask=0x3
argv[3]: root=/dev/sda2
argv[4]: rootdelay=15
argv[5]: rw
argv[6]: mtdparts=phys_mapped_flash:512k(boot0),512k(boot1),64k@3072k(eeprom)
argv[7]: net.ifnames=0
argv[8]: console=ttyS0,115200
argv[9]: panic=5
ELF file is 64 bit
Allocating memory for ELF segment: addr: 0x8110 (adjusted to:
0x110), size 0x8382c0
Allocated memory for ELF segment: addr: 0x8110, size 0x8382c0
Processing PHDR 0
Loading 7fdf00 bytes at 8110
Clearing 3a3c0 bytes at 818fdf00
## Loading Linux kernel with entry point: 0x816d7b10 ...
Bootloader: Done loading app on coremask: 0x3
[0.00] Initializing cgroup subsys cpuset
[0.00] Initializing cgroup subsys cpu
[0.00] Initializing cgroup subsys cpuacct
[0.00] Linux version 3.15.0-rc2 (neko@phantom) (gcc version 4.8.2
(Gentoo 4.8.2 p1.3r1, pie-0.5.8r1) ) #1 SMP Mon Apr 28 20:04:08 MSK 2014
[0.00] CVMSEG size: 2 cache lines (256 bytes)
[0.00] bootconsole [early0] enabled
[0.00] CPU0 revision is: 000d0601 (Cavium Octeon+)
[0.00] Checking for the multiply/shift bug... no.
[0.00] Checking for the daddiu bug... no.
[0.00] Determined physical RAM map:
[0.00] memory: 0640 @ 01a0 (usable)
[0.00] memory: 07c0 @ 0820 (usable)
[0.00] memory: 0fc0 @ 00041000 (usable)
[0.00] memory: 008382c0 @ 0110 (usable)
[0.00] Wasting 243712 bytes for tracking 4352 unused pages
[0.00] Initrd not found or empty - disabling initrd
[0.00] Using internal Device Tree.
[0.00] software IO TLB [mem 0x0218f000-0x0618f000] (64MB) mapped at
[8218f000-8618efff]
[0.00] Zone ranges:
[0.00] DMA32[mem 0x0110-0xefff]
[0.00] Normal [mem 0xf000-0x41fbf]
[0.00] Movable zone start for each node
[0.00] Early memory node ranges
[0.00] node 0: [mem 0x0110-0x01937fff]
[0.00] node 0: [mem 0x01a0-0x07df]
[0.00] node 0: [mem 0x0820-0x0fdf]
[0.00] node 0: [mem 0x41000-0x41fbf]
[0.00] Primary instruction cache 32kB, virtually tagged, 4 way, 64
sets, linesize 128 bytes.
[0.00] Primary data cache 16kB, 64-way, 2 sets, linesize 128 bytes.
[0.00] PERCPU: Embedded 10 pages/cpu @8622a000 s12032 r8192
d20736 u40960
[0.00] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 122265
[0.00] Kernel command line: bootoctlinux $loadaddr coremask=0x3
root=/dev/sda2 rootdelay=15 rw
mtdparts=phys_mapped_flash:512k(boot0),512k(boot1),64k@3072k(eeprom5
[0.00] PID hash table entries: 2048 (order: 2, 16384 bytes)
[0.00] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[0.00] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[0.00] Memory: 413184K/495840K available (6029K kernel code, 530K
rwdata, 1332K rodata, 272K init, 224K bss, 82656K reserved)
[0.00] Hierarchical RCU implementation.
[0.00] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[0.00] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[0.00] NR_IRQS:
