Re: [E1000-devel] i40e driver question
On Wed, 2015-06-10 at 18:57 -0400, Alpesh Patel wrote: Hi Jeffrey, I found your name from lwn.net posting. I am trying to use the X710 nic and am using the i40e driver Is that the right driver for that nic? Yes. I have added e1000-devel mailing list (as well as a couple of i40e developers) to help answer your questions. I see a few dmesg logs (curtailed): on loading the driver (i40e): i40e: Intel(R) Ethernet Connection XL710 Network Driver - version 0.4.10-k i40e: Copyright (c) 2013 - 2014 Intel Corporation. i40e :05:00.0: f4.22 a1.1 n04.26 e8000152d i40e :05:00.0: MAC address: 68:05:ca:32:fd:78 i40e :05:00.0: AQ Querying DCB configuration failed: 1 i40e :05:00.0: init_pf_dcb failed: -53 i40e :05:00.0: irq 188 for MSI/MSI-X ... i40e :05:00.0: irq 233 for MSI/MSI-X i40e :05:00.0: Could not remove default MAC-VLAN i40e :05:00.0: i40e_ptp_init: added PHC on eth18 i40e :05:00.0: PCI-Express: Speed 8.0GT/s Width x8 i40e :05:00.0: Features: PF-id[0] VFs: 32 VSIs: 34 QP: 28 RSS FD_ATR FD_SB NTUPLE PTP i40e :05:00.1: f4.22 a1.1 n04.26 e8000152d i40e :05:00.1: MAC address: 68:05:ca:32:fd:79 i40e :05:00.1: AQ Querying DCB configuration failed: 1 i40e :05:00.1: init_pf_dcb failed: -53 i40e :05:00.1: irq 234 for MSI/MSI-X ... and this happens for each of the 4 ports on this nic. I understand that this nic uses fortville chip - with 4x10g ports on the nic. When I connect the port to an ixia interface, the led on ixia is not up (it is not lighted with any color) I manually assigned an ip and brought the interface up - it stays up and I am able to ping it, but that's just loopback interface ping. are the failures/errors in the log above harmless? any documentation on the driver/parameters? Any configuration or other information that you can point me to would be helpful. mii-tool on these interfaces do not work [root@ott-ss-dt-14 :05:00.0]# mii-tool eth18 SIOCGMIIPHY on 'eth18' failed: Operation not supported any pointers you can provide? signature.asc Description: This is a digitally signed message part -- ___ E1000-devel mailing list E1000-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/e1000-devel To learn more about Intel#174; Ethernet, visit http://communities.intel.com/community/wired
Re: [E1000-devel] i40e driver question
I can help with that. Please look here for the latest driver releas: http://sourceforge.net/projects/e1000/files/i40e%20stable/ - Greg -Original Message- From: Nelson, Shannon [mailto:shannon.nel...@intel.com] Sent: Thursday, June 11, 2015 6:25 PM To: Fujinaka, Todd; Kirsher, Jeffrey T; Alpesh Patel Cc: e1000-devel; Brandeburg, Jesse Subject: Re: [E1000-devel] i40e driver question Alpesh, Your log messages show that you are using driver version 0.4.10-k which is extremely old at this point, and will not support the more recent hardware/firmware that you have (e8000152d). Before doing anything else, please find a newer driver. sln -Original Message- From: Fujinaka, Todd [mailto:todd.fujin...@intel.com] Sent: Thursday, June 11, 2015 5:26 PM To: Kirsher, Jeffrey T; Alpesh Patel Cc: e1000-devel; Brandeburg, Jesse Subject: Re: [E1000-devel] i40e driver question Actually, you have direct support through the local Cisco team. Please contact them for help. Todd Fujinaka Software Application Engineer Networking Division (ND) Intel Corporation todd.fujin...@intel.com (503) 712-4565 -Original Message- From: Jeff Kirsher [mailto:jeffrey.t.kirs...@intel.com] Sent: Thursday, June 11, 2015 3:55 PM To: Alpesh Patel Cc: e1000-devel; Brandeburg, Jesse Subject: Re: [E1000-devel] i40e driver question On Wed, 2015-06-10 at 18:57 -0400, Alpesh Patel wrote: Hi Jeffrey, I found your name from lwn.net posting. I am trying to use the X710 nic and am using the i40e driver Is that the right driver for that nic? Yes. I have added e1000-devel mailing list (as well as a couple of i40e developers) to help answer your questions. I see a few dmesg logs (curtailed): on loading the driver (i40e): i40e: Intel(R) Ethernet Connection XL710 Network Driver - version 0.4.10-k i40e: Copyright (c) 2013 - 2014 Intel Corporation. i40e :05:00.0: f4.22 a1.1 n04.26 e8000152d i40e :05:00.0: MAC address: 68:05:ca:32:fd:78 i40e :05:00.0: AQ Querying DCB configuration failed: 1 i40e :05:00.0: init_pf_dcb failed: -53 i40e :05:00.0: irq 188 for MSI/MSI-X ... i40e :05:00.0: irq 233 for MSI/MSI-X i40e :05:00.0: Could not remove default MAC-VLAN i40e :05:00.0: i40e_ptp_init: added PHC on eth18 i40e :05:00.0: PCI-Express: Speed 8.0GT/s Width x8 i40e :05:00.0: Features: PF-id[0] VFs: 32 VSIs: 34 QP: 28 RSS FD_ATR FD_SB NTUPLE PTP i40e :05:00.1: f4.22 a1.1 n04.26 e8000152d i40e :05:00.1: MAC address: 68:05:ca:32:fd:79 i40e :05:00.1: AQ Querying DCB configuration failed: 1 i40e :05:00.1: init_pf_dcb failed: -53 i40e :05:00.1: irq 234 for MSI/MSI-X ... and this happens for each of the 4 ports on this nic. I understand that this nic uses fortville chip - with 4x10g ports on the nic. When I connect the port to an ixia interface, the led on ixia is not up (it is not lighted with any color) I manually assigned an ip and brought the interface up - it stays up and I am able to ping it, but that's just loopback interface ping. are the failures/errors in the log above harmless? any documentation on the driver/parameters? Any configuration or other information that you can point me to would be helpful. mii-tool on these interfaces do not work [root@ott-ss-dt-14 :05:00.0]# mii-tool eth18 SIOCGMIIPHY on 'eth18' failed: Operation not supported any pointers you can provide? -- - --- ___ E1000-devel mailing list E1000-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/e1000-devel To learn more about Intel#174; Ethernet, visit http://communities.intel.com/community/wired -- ___ E1000-devel mailing list E1000-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/e1000-devel To learn more about Intel#174; Ethernet, visit http://communities.intel.com/community/wired -- ___ E1000-devel mailing list E1000-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/e1000-devel To learn more about Intel#174; Ethernet, visit http://communities.intel.com/community/wired
Re: [E1000-devel] i40e driver question
Actually, you have direct support through the local Cisco team. Please contact them for help. Todd Fujinaka Software Application Engineer Networking Division (ND) Intel Corporation todd.fujin...@intel.com (503) 712-4565 -Original Message- From: Jeff Kirsher [mailto:jeffrey.t.kirs...@intel.com] Sent: Thursday, June 11, 2015 3:55 PM To: Alpesh Patel Cc: e1000-devel; Brandeburg, Jesse Subject: Re: [E1000-devel] i40e driver question On Wed, 2015-06-10 at 18:57 -0400, Alpesh Patel wrote: Hi Jeffrey, I found your name from lwn.net posting. I am trying to use the X710 nic and am using the i40e driver Is that the right driver for that nic? Yes. I have added e1000-devel mailing list (as well as a couple of i40e developers) to help answer your questions. I see a few dmesg logs (curtailed): on loading the driver (i40e): i40e: Intel(R) Ethernet Connection XL710 Network Driver - version 0.4.10-k i40e: Copyright (c) 2013 - 2014 Intel Corporation. i40e :05:00.0: f4.22 a1.1 n04.26 e8000152d i40e :05:00.0: MAC address: 68:05:ca:32:fd:78 i40e :05:00.0: AQ Querying DCB configuration failed: 1 i40e :05:00.0: init_pf_dcb failed: -53 i40e :05:00.0: irq 188 for MSI/MSI-X ... i40e :05:00.0: irq 233 for MSI/MSI-X i40e :05:00.0: Could not remove default MAC-VLAN i40e :05:00.0: i40e_ptp_init: added PHC on eth18 i40e :05:00.0: PCI-Express: Speed 8.0GT/s Width x8 i40e :05:00.0: Features: PF-id[0] VFs: 32 VSIs: 34 QP: 28 RSS FD_ATR FD_SB NTUPLE PTP i40e :05:00.1: f4.22 a1.1 n04.26 e8000152d i40e :05:00.1: MAC address: 68:05:ca:32:fd:79 i40e :05:00.1: AQ Querying DCB configuration failed: 1 i40e :05:00.1: init_pf_dcb failed: -53 i40e :05:00.1: irq 234 for MSI/MSI-X ... and this happens for each of the 4 ports on this nic. I understand that this nic uses fortville chip - with 4x10g ports on the nic. When I connect the port to an ixia interface, the led on ixia is not up (it is not lighted with any color) I manually assigned an ip and brought the interface up - it stays up and I am able to ping it, but that's just loopback interface ping. are the failures/errors in the log above harmless? any documentation on the driver/parameters? Any configuration or other information that you can point me to would be helpful. mii-tool on these interfaces do not work [root@ott-ss-dt-14 :05:00.0]# mii-tool eth18 SIOCGMIIPHY on 'eth18' failed: Operation not supported any pointers you can provide? -- ___ E1000-devel mailing list E1000-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/e1000-devel To learn more about Intel#174; Ethernet, visit http://communities.intel.com/community/wired
Re: [E1000-devel] i40e driver question
Alpesh, Your log messages show that you are using driver version 0.4.10-k which is extremely old at this point, and will not support the more recent hardware/firmware that you have (e8000152d). Before doing anything else, please find a newer driver. sln -Original Message- From: Fujinaka, Todd [mailto:todd.fujin...@intel.com] Sent: Thursday, June 11, 2015 5:26 PM To: Kirsher, Jeffrey T; Alpesh Patel Cc: e1000-devel; Brandeburg, Jesse Subject: Re: [E1000-devel] i40e driver question Actually, you have direct support through the local Cisco team. Please contact them for help. Todd Fujinaka Software Application Engineer Networking Division (ND) Intel Corporation todd.fujin...@intel.com (503) 712-4565 -Original Message- From: Jeff Kirsher [mailto:jeffrey.t.kirs...@intel.com] Sent: Thursday, June 11, 2015 3:55 PM To: Alpesh Patel Cc: e1000-devel; Brandeburg, Jesse Subject: Re: [E1000-devel] i40e driver question On Wed, 2015-06-10 at 18:57 -0400, Alpesh Patel wrote: Hi Jeffrey, I found your name from lwn.net posting. I am trying to use the X710 nic and am using the i40e driver Is that the right driver for that nic? Yes. I have added e1000-devel mailing list (as well as a couple of i40e developers) to help answer your questions. I see a few dmesg logs (curtailed): on loading the driver (i40e): i40e: Intel(R) Ethernet Connection XL710 Network Driver - version 0.4.10-k i40e: Copyright (c) 2013 - 2014 Intel Corporation. i40e :05:00.0: f4.22 a1.1 n04.26 e8000152d i40e :05:00.0: MAC address: 68:05:ca:32:fd:78 i40e :05:00.0: AQ Querying DCB configuration failed: 1 i40e :05:00.0: init_pf_dcb failed: -53 i40e :05:00.0: irq 188 for MSI/MSI-X ... i40e :05:00.0: irq 233 for MSI/MSI-X i40e :05:00.0: Could not remove default MAC-VLAN i40e :05:00.0: i40e_ptp_init: added PHC on eth18 i40e :05:00.0: PCI-Express: Speed 8.0GT/s Width x8 i40e :05:00.0: Features: PF-id[0] VFs: 32 VSIs: 34 QP: 28 RSS FD_ATR FD_SB NTUPLE PTP i40e :05:00.1: f4.22 a1.1 n04.26 e8000152d i40e :05:00.1: MAC address: 68:05:ca:32:fd:79 i40e :05:00.1: AQ Querying DCB configuration failed: 1 i40e :05:00.1: init_pf_dcb failed: -53 i40e :05:00.1: irq 234 for MSI/MSI-X ... and this happens for each of the 4 ports on this nic. I understand that this nic uses fortville chip - with 4x10g ports on the nic. When I connect the port to an ixia interface, the led on ixia is not up (it is not lighted with any color) I manually assigned an ip and brought the interface up - it stays up and I am able to ping it, but that's just loopback interface ping. are the failures/errors in the log above harmless? any documentation on the driver/parameters? Any configuration or other information that you can point me to would be helpful. mii-tool on these interfaces do not work [root@ott-ss-dt-14 :05:00.0]# mii-tool eth18 SIOCGMIIPHY on 'eth18' failed: Operation not supported any pointers you can provide? --- --- ___ E1000-devel mailing list E1000-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/e1000-devel To learn more about Intel#174; Ethernet, visit http://communities.intel.com/community/wired -- ___ E1000-devel mailing list E1000-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/e1000-devel To learn more about Intel#174; Ethernet, visit http://communities.intel.com/community/wired