Re: [Elecraft] K3 and MicroKeyer MKII
Dr Evert, First off all for MK2 Use separate virtual comports in the router for every Item you want to control. So no virtual comport sharing. Eg cat virtual comport = ptt virtual comport must be avoided. That can cause strange behaviour in combination with different programs. For the K3 Check your PTT-KEY setting in the K3 advanced menu. Start with disabling those setting e.g. OFF-OFF That way you can't trigger PTT or Key via the K3's DB9 connector You do not need those controls if you use the MK2 anyway Gd luck Hugo pa4la __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K3 and MicroKeyer MKII
I'm trying to connect my K3 to the MicroHam MKII. I'm struggling already for two weeks now to let the MKII to stop putting my K3 into TX mode (unwillingly). When I switch on the K3 and the MKII (both on a different power supply) nothing goes wrong so far. But as soon as the router is started, it starts to put the K3 in "pulsed" TX (each +/- 1.5 sec a TX pulse) If I pull the CAT (DB-9) cable from the K3, it stops. I got the idea that there was some relation between TX pulsing and polling the K3 for info I did contact MicroHam support, did get prompt answers, but it's still not solved (yet). When I delete the device and create a new one (PORTS tab - SET - and select the K3) the problem is gone. I did set the communication speed at 4800 Baud as suggested by MicroHam support. I have no other application running which generates audio and might interfere with the MKII (I think..) I'm really puzzled. I thought I might give it a try here. If you feel it's OT, contact me direct. 73's, Evert PA2KW __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K3 and microkeyer
Just finished my K3 works great Interfaced with the microkeyer which reads the frequency and keys cw fine. Now I need to configure N1MM to put it all together. Created ports as follows in Router 2=Radio 3=Ptt 6=foot switch 8=winkey. Can someone help me get N1MM configurer to put all this together, right now I am only interested in keying the radio for CW using the N1MM memories for contesting Any help greatly appreciated Jay ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com