Re: [Elecraft] KPA has FAILED...high SWR reported by K3 when amp in "Operate"

2012-03-15 Thread ke9uw
Excellent response from service with an RF unit on the way...appeared not to
be switching into the transmit mode when in "operate".

-
Chuck, KE9UW
--
View this message in context: 
http://elecraft.365791.n2.nabble.com/KPA-has-FAILED-high-SWR-reported-by-K3-when-amp-in-Operate-tp7371793p7377011.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


Re: [Elecraft] KPA has FAILED...high SWR reported by K3 when amp in "Operate"

2012-03-14 Thread hawley, charles j jr
Hi,
The amp has worked well with 500 watts out, and in standby works fine with 100 
watts and the power shown on the led meter is correct. When in operate, it 
shows high swr with only 1 or 2 watts of drive. So something in the t/r switch 
has failed.
I guess. 
Thanks for the reply.
Chuck, KE9UW

Sent from my iPad

On Mar 14, 2012, at 1:11 PM, "mkoeh...@comcast.net"  
wrote:

> Chuck - I'm a brand new KPA500 owner ...so don't have a lot of history. 
> Probably not this simple, but I would suggest looking closely at the 
> clearance between the center pin of the high power output connector and that 
> metal shield. I thought the design was exceptional but was disappointed at 
> how there was almost no clearance here. (If I had a Greenlee punch, I would 
> have taken a nibble out to provide more clearance!)  It's possible when you 
> kick into high power, it could arc/short or have a bad VSWR.  Also, have all 
> the cables on the output side been run 500W+ before??  73- Mark WA3OFR 
> Sent via BlackBerry by AT&T
> 
> -Original Message-
> From: ke9uw 
> Date: Wed, 14 Mar 2012 06:37:06 
> To: 
> Subject: [Elecraft] KPA has FAILED...high SWR reported by K3 when amp in
>"Operate"
> 
> My KPA500 causes a high SWR showing at the K3 when the amp is in transmit
> operate. All else seems to work ok...reloaded firmware...checked
> faults...something about "power lost without controlled shutdown".
> 
> Any ideas? Pin diode?
> 
> -
> Chuck, KE9UW
> --
> View this message in context: 
> http://elecraft.365791.n2.nabble.com/KPA-has-FAILED-high-SWR-reported-by-K3-when-amp-in-Operate-tp7371793p7371793.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


[Elecraft] KPA has FAILED...high SWR reported by K3 when amp in "Operate"

2012-03-14 Thread ke9uw
My KPA500 causes a high SWR showing at the K3 when the amp is in transmit
operate. All else seems to work ok...reloaded firmware...checked
faults...something about "power lost without controlled shutdown".

Any ideas? Pin diode?

-
Chuck, KE9UW
--
View this message in context: 
http://elecraft.365791.n2.nabble.com/KPA-has-FAILED-high-SWR-reported-by-K3-when-amp-in-Operate-tp7371793p7371793.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html