Re: [Elecraft] P3 v SubRX
You're preachin to da choir son. Fine job though. K1N was awful for DQRM, lids and untrained idiots. 3G0ZC the next week wasn't quite as bad, nor as rare. E30FB is rough here on the West Coast due to lack of signal strength, conditions and the same crowds. You can't hear, what isn't there. I see that problem cause as twofold: Lack of noobs seeking an Elmer for proper training NOT covered adequately in the classes or tests; Lack of folks willing to become an Elmer to guide the newcomers. That's WAY off topic for here. Putting in perspective and back on topic; the P3 was almost totally useless for K1N, except to watch and measure the height and width of the pileup (there WERE no holes to utilize in that pack). What you said is very true, the subreceiver helped, about as much because of the reasons you stated too. Together however, is still a deadly combination, by watching the (group of) signal(s) on the P3 that the DX is working, quickly tuning the receiver to the most likely being worked and confirming by ear, they allowed me to gain 13 Q's with K1N on a low dipole and some power (it's all in the DX pattern recognition, if they're not purposely avoiding a pattern). The other operating style was simply work the edges of the pileup, don't be in the middle. P3 and KRX3 in 'normal' DX collecting... fish:barrel. They are the sole reason I have 250 'entities' in the log over the last couple years. When I'm not traveling, I DX (sometimes I *am* the DX). Oh yes, the KPA500 helps, a LOT since I'm on a sole dipole. I don't see things improving in the ranks, so anyone looking at the purchase of the K Line should simply keep the budget open ended and collect everything as they can. P3 first (plan on the SVGA card too, your eyes will never improve), then a KRX3, then flesh it out with more. Let's look at your budget too. The P3/SVGA combo costs versus the KRX3 with filters (mine are all filled the same in both, for diversity and to minimize what my failing ears are subjected to when listening in two places). Add in that you'll have to replace the Synth card when you add the KRX3 (or obtain two used ones, storing the new one for later, but why) and I suspect that financially as well, the P3/SVGA will be more reachable first. That's my best reasoning for the P3 and why it should be first. It's the better of the two choices and it's more financially obtainable. Whatever you choose, good luck and good hunting. Rick wa6nhc On 3/9/2015 6:02 PM, Randy Farmer wrote: I would agree that the P3 should probably take priority over the Subreceiver for a new buy, mostly due to the many different things it can do for you. But... my experience this weekend trying to work E30FB on 20 CW sure made me glad I had the Sub. I would never have worked them using just the scope. Problem is, it seems the way people try to work DX these days makes it virtually impossible to depend on a visual cue to know who's being worked by the DX if there's a pileup of any size at all. E30FB had the pile spread out for better than 20 kHz, and the scope showed a constant morass of signals all across the entire span. Aside from the obliviots who continually send their call whether the DX is listening or not, there are many who apparently see nothing wrong with coming back or continuing to call when the DX operator replies to a call that obviously isn't theirs. Every time E30FB would answer a complete call there were dozens of perfectly timed signals that jumped up all across the extent of the pileup. Luckily, using the second receiver I managed to stumble on to one that turned out to actually be the guy he was working. A minute or two of careful listening around that frequency revealed the operator's tuning pattern, and after just a couple of calls I was in the log too. If you really want to work rare DX these days you're going to NEED the second receiver. This isn't due to any problems with the capabilities of the P3 -- it's the result of operating practices that continue to deteriorate. You'll need all the tools you can get and all the cunning you can muster to work DX through the Doofus curtain these days. 73... Randy, W8FN __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to happymooseph...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] P3 v SubRX
Randy, I can do the same thing by holding REV and dialing around with VFO A. Certainly not as convenient as having a subRX but it works. To make sure I don’t accidentally lose the DX's frequency, I lock VFO A first. Yes, I am amazed and shocked at the horrible operating practices I now see. I weep. :( 73. > On Mar 9, 2015, at 9:02 PM, Randy Farmer wrote: > > I would agree that the P3 should probably take priority over the Subreceiver > for a new buy, mostly due to the many different things it can do for you. > But... my experience this weekend trying to work E30FB on 20 CW sure made me > glad I had the Sub. I would never have worked them using just the scope. Carl Yaffey K8NU Recording studio. cyaffeyno_s...@gmail.com 614 268 6353, Columbus OH http://www.carl-yaffey.com http://www.grassahol.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] P3 v SubRX
I had the same problem trying to work K1N. I don't have the subreceiver, and trying to identify the station being worked gets really hard as you switch between frequencies with the REVerse button. It doesn't help that the tuning knob for the pileup changes when you hold REV. Jack, W6FB commented that it was really nice with the DX in the left ear, the pileup in the right, and only one knob to turn. I'll probably add the subreceiver to the radio, but there are some higher priority pieces. 73 Bill AE6JV On 3/9/15 at 6:02 PM, w...@tx.rr.com (Randy Farmer) wrote: I would agree that the P3 should probably take priority over the Subreceiver for a new buy, mostly due to the many different things it can do for you. But... my experience this weekend trying to work E30FB on 20 CW sure made me glad I had the Sub. I would never have worked them using just the scope. Problem is, it seems the way people try to work DX these days makes it virtually impossible to depend on a visual cue to know who's being worked by the DX if there's a pileup of any size at all. E30FB had the pile spread out for better than 20 kHz, and the scope showed a constant morass of signals all across the entire span. Aside from the obliviots who continually send their call whether the DX is listening or not, there are many who apparently see nothing wrong with coming back or continuing to call when the DX operator replies to a call that obviously isn't theirs. Every time E30FB would answer a complete call there were dozens of perfectly timed signals that jumped up all across the extent of the pileup. Luckily, using the second receiver I managed to stumble on to one that turned out to actually be the guy he was working. A minute or two of careful listening around that frequency revealed the operator's tuning pattern, and after just a couple of calls I was in the log too. --- Bill Frantz| "I wish there was a knob on the TV to turn up the 408-356-8506 | intelligence. There's a knob called "brightness", but www.pwpconsult.com | it doesn't work. -- Gallagher __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] P3 v SubRX
I would agree that the P3 should probably take priority over the Subreceiver for a new buy, mostly due to the many different things it can do for you. But... my experience this weekend trying to work E30FB on 20 CW sure made me glad I had the Sub. I would never have worked them using just the scope. Problem is, it seems the way people try to work DX these days makes it virtually impossible to depend on a visual cue to know who's being worked by the DX if there's a pileup of any size at all. E30FB had the pile spread out for better than 20 kHz, and the scope showed a constant morass of signals all across the entire span. Aside from the obliviots who continually send their call whether the DX is listening or not, there are many who apparently see nothing wrong with coming back or continuing to call when the DX operator replies to a call that obviously isn't theirs. Every time E30FB would answer a complete call there were dozens of perfectly timed signals that jumped up all across the extent of the pileup. Luckily, using the second receiver I managed to stumble on to one that turned out to actually be the guy he was working. A minute or two of careful listening around that frequency revealed the operator's tuning pattern, and after just a couple of calls I was in the log too. If you really want to work rare DX these days you're going to NEED the second receiver. This isn't due to any problems with the capabilities of the P3 -- it's the result of operating practices that continue to deteriorate. You'll need all the tools you can get and all the cunning you can muster to work DX through the Doofus curtain these days. 73... Randy, W8FN __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] P3 v SubRX
I am in full agreement. I feel blind without my P3. At a glance I can tell if the band is active or not. For example, last weekend with the DX contest and the wide open 20m, the scope was almost solid in certain spectrums. I find that I use the subRX if I am getting bored on the 75m net and want someone else to listen to. I also find it useful for tuning in the "+5" ahead of time before leaving the net with someone and making sure that it is available. I am not set up with a separate Rx antenna so I can't comment on how useful diversity Rx is. Bottom line, if I have to choose only one, I would choose the P3. Eric, WB7SDE On Mon, Mar 9, 2015, at 01:00 PM, Dauer, Edward wrote: > Don ‹ > > I agree with Dave. I have both - the SubRX from the beginning and the P3 > a year or so later. I have become addicted to the P3; but can¹t remember > using the SubRX for anything other than chasing DX in pileups. Even in > contests, where operating a significant split is usually a no-no, the XIT > alone has been enough while the subRX imposes a small but noticeable hit > on weak-signal sensitivity. But I am strictly CW - there may be > advantages in other modes. > > Ted, KN1CBR > > > >Message: 8 > >Date: Mon, 09 Mar 2015 09:50:49 -0700 > >From: David Cole > >To: elecraft@mailman.qth.net > >Subject: Re: [Elecraft] [K3] My K3 needs pimping > >Message-ID: <1425919849.15814.234.camel@nostromo.NK7Z> > >Content-Type: text/plain; charset="UTF-8" > > > >Panadaptor, you will probably get more use from it than the sub rx. I > >do... I had occasion to have it mine off for a bit, and it is crippling > >to no longer have one... I use it so much more than a sub RX. > >-- > >Thanks and 73's, > >For equipment, and software setups and reviews see: > >www.nk7z.net > >for MixW support see; > >http://groups.yahoo.com/neo/groups/mixw/info > >for Dopplergram information see: > >http://groups.yahoo.com/neo/groups/dopplergram/info > >for MM-SSTV see: > >http://groups.yahoo.com/neo/groups/MM-SSTV/info > > > > > >On Mon, 2015-03-09 at 16:24 +, Don Putnick via Elecraft wrote: > >> Okay, folks. Please advise me on a worthy cause - my K3. I'm a casual > >>DXer and I don't contest. My main modes are SSB and soundcard digital. > >>I'm fully stocked with roofing filters, and I have the KPA500 and > >>KAT500. Should my next purchase be a subreceiver or a panadapter, and > >>why? 73 Don NA6Z K3 #5495 > >> ' > >> __ > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to wb7...@evross.com -- Eric Ross __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] P3 v SubRX
Don ‹ I agree with Dave. I have both - the SubRX from the beginning and the P3 a year or so later. I have become addicted to the P3; but can¹t remember using the SubRX for anything other than chasing DX in pileups. Even in contests, where operating a significant split is usually a no-no, the XIT alone has been enough while the subRX imposes a small but noticeable hit on weak-signal sensitivity. But I am strictly CW - there may be advantages in other modes. Ted, KN1CBR >Message: 8 >Date: Mon, 09 Mar 2015 09:50:49 -0700 >From: David Cole >To: elecraft@mailman.qth.net >Subject: Re: [Elecraft] [K3] My K3 needs pimping >Message-ID: <1425919849.15814.234.camel@nostromo.NK7Z> >Content-Type: text/plain; charset="UTF-8" > >Panadaptor, you will probably get more use from it than the sub rx. I >do... I had occasion to have it mine off for a bit, and it is crippling >to no longer have one... I use it so much more than a sub RX. >-- >Thanks and 73's, >For equipment, and software setups and reviews see: >www.nk7z.net >for MixW support see; >http://groups.yahoo.com/neo/groups/mixw/info >for Dopplergram information see: >http://groups.yahoo.com/neo/groups/dopplergram/info >for MM-SSTV see: >http://groups.yahoo.com/neo/groups/MM-SSTV/info > > >On Mon, 2015-03-09 at 16:24 +, Don Putnick via Elecraft wrote: >> Okay, folks. Please advise me on a worthy cause - my K3. I'm a casual >>DXer and I don't contest. My main modes are SSB and soundcard digital. >>I'm fully stocked with roofing filters, and I have the KPA500 and >>KAT500. Should my next purchase be a subreceiver or a panadapter, and >>why? 73 Don NA6Z K3 #5495 >> ' >> __ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com