Re: [Elecraft] K3 FP getting warm.
Mine has been on overnight and is at 36c right now. The PA is at 31c and I've not transmitted since last night. Ambient temperature is 73F right now. 73, de Nate >> -- "The optimist proclaims that we live in the best of all possible worlds. The pessimist fears this is true." Ham radio, Linux, bikes, and more: http://www.n0nb.us __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 FP getting warm.
On Mon, 24 Feb 2014 12:43:56 +1000, Wayne Burdick wrote: My first K3 (which had every option but the KRX3 fitted) I owned used to regularly go to over 50 degrees C on the FP temperature with no ill effects and on more than a couple of occasions it went to over 65 degrees, it then shut down due to the heat. (I live in Tropical North Queensland and my shack is a non A/C 20' container with a coupla windows cut into it.) -- Jeff Cochrane - VK4XA East Innisfail QLD, Australia I've seen it get as high as 40 C on a really hot day. This won't hurt anything. 73, Wayne N6KR On Feb 23, 2014, at 11:26 AM, NZ0T wrote: I noticed today that the front panel of my K3/100 SN 1502 with the newer DSP board seems much warmer to the touch than before. With the rig on and having not transmitted for over an hour the PA temp is 30C while the FP temp is 34C. Room temp is 22.7C. I have never seen this before. The rig is working fine as far as I can tell. I recently loaded the latest Beta firmware 4.83 but otherwise have made no changes.Have I just not noticed in the over five and a half years I've owned the rig or should I worry about this? Or am I just getting old and can't remember? :) 73 Bill NZ0T __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 FP getting warm.
I've seen it get as high as 40 C on a really hot day. This won't hurt anything. 73, Wayne N6KR On Feb 23, 2014, at 11:26 AM, NZ0T wrote: > I noticed today that the front panel of my K3/100 SN 1502 with the newer DSP > board seems much warmer to the touch than before. With the rig on and > having not transmitted for over an hour the PA temp is 30C while the FP temp > is 34C. Room temp is 22.7C. I have never seen this before. The rig is > working fine as far as I can tell. I recently loaded the latest Beta > firmware 4.83 but otherwise have made no changes.Have I just not noticed > in the over five and a half years I've owned the rig or should I worry about > this? > Or am I just getting old and can't remember? :) > > 73 Bill NZ0T > > > > -- > View this message in context: > http://elecraft.365791.n2.nabble.com/K3-FP-getting-warm-tp7584616.html > Sent from the Elecraft mailing list archive at Nabble.com. > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 FP getting warm.
Bill, I would not think that 34 degC should be any cause for concern. In fact, I would not be concerned unless it got over 40 degC. Most devices are rated for an operating free-air temperature up to at least 70 degC, and that is quite hot (158 degF). In general, if you can hold your hand on a device for 5 minutes or more, the temperature is OK. 73, Don W3FPR On 2/23/2014 2:26 PM, NZ0T wrote: I noticed today that the front panel of my K3/100 SN 1502 with the newer DSP board seems much warmer to the touch than before. With the rig on and having not transmitted for over an hour the PA temp is 30C while the FP temp is 34C. Room temp is 22.7C. I have never seen this before. The rig is working fine as far as I can tell. I recently loaded the latest Beta firmware 4.83 but otherwise have made no changes.Have I just not noticed in the over five and a half years I've owned the rig or should I worry about this? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K3 FP getting warm.
I noticed today that the front panel of my K3/100 SN 1502 with the newer DSP board seems much warmer to the touch than before. With the rig on and having not transmitted for over an hour the PA temp is 30C while the FP temp is 34C. Room temp is 22.7C. I have never seen this before. The rig is working fine as far as I can tell. I recently loaded the latest Beta firmware 4.83 but otherwise have made no changes.Have I just not noticed in the over five and a half years I've owned the rig or should I worry about this? Or am I just getting old and can't remember? :) 73 Bill NZ0T -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-FP-getting-warm-tp7584616.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html