Re: [Elecraft] K3 issue in CW mode
I think the T just indicates CW decode. Hold the TEXT DEC button and then rotate the VFO B knob until you get OFF in the VFO B section of the display. 73, Joel - W4JBB On 2/23/14, 10:44 PM, Ham Radio wrote: In CW mode it still will not get any power out and I am stuck with the T in the lower right part of the display. CW was working fine until I went to 2m and then returned back to 6m and then subsequently to HF. All other modes are working fine. Any thoughts or ideas of what I have done would be helpful. Thanks, Keith AK6ZZ -Original Message- From: Ham Radio Sent: Sunday, February 23, 2014 7:46 PM To: Elecraft Group Subject: Re: [Elecraft] K3 issue in CW mode I figured out the + now looking to get rid of the T. Keith AK6ZZ -Original Message- From: Keith Heimbold Sent: Sunday, February 23, 2014 6:12 PM To: Elecraft Group Subject: [Elecraft] K3 issue in CW mode I just turned on my 2m transverter and when I went back to 6m my CW doesn't work. The display shows + and T and I don't get any power out in CW. Other modes work fine. I looked at instructions but couldn't figure it out. Keith AK6ZZ Sent from my iPhone please excuse typos __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 issue in CW mode
Turn on VOX... ...bill nr4c Sent from my Verizon Wireless 4G LTE DROID Joel Black w4...@charter.net wrote: I think the T just indicates CW decode. Hold the TEXT DEC button and then rotate the VFO B knob until you get OFF in the VFO B section of the display. 73, Joel - W4JBB On 2/23/14, 10:44 PM, Ham Radio wrote: In CW mode it still will not get any power out and I am stuck with the T in the lower right part of the display. CW was working fine until I went to 2m and then returned back to 6m and then subsequently to HF. All other modes are working fine. Any thoughts or ideas of what I have done would be helpful. Thanks, Keith AK6ZZ -Original Message- From: Ham Radio Sent: Sunday, February 23, 2014 7:46 PM To: Elecraft Group Subject: Re: [Elecraft] K3 issue in CW mode I figured out the + now looking to get rid of the T. Keith AK6ZZ -Original Message- From: Keith Heimbold Sent: Sunday, February 23, 2014 6:12 PM To: Elecraft Group Subject: [Elecraft] K3 issue in CW mode I just turned on my 2m transverter and when I went back to 6m my CW doesn't work. The display shows + and T and I don't get any power out in CW. Other modes work fine. I looked at instructions but couldn't figure it out. Keith AK6ZZ Sent from my iPhone please excuse typos __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 issue in CW mode
Nope, hold the TEST button (right hand portion of the MODE switch) until it goes away. the Flashing T indicates you have the rig in TEST mode which lets you use the keyer in CW mode without putting out any power. Jim - W0EB Turn on VOX... ...bill nr4c Sent from my Verizon Wireless 4G LTE DROID Joel Black w4...@charter.net wrote: I think the T just indicates CW decode. Hold the TEXT DEC button and then rotate the VFO B knob until you get OFF in the VFO B section of the display. 73, Joel - W4JBB On 2/23/14, 10:44 PM, Ham Radio wrote: In CW mode it still will not get any power out and I am stuck with the T in the lower right part of the display. CW was working fine until I went to 2m and then returned back to 6m and then subsequently to HF. All other modes are working fine. Any thoughts or ideas of what I have done would be helpful. Thanks, Keith AK6ZZ -Original Message- From: Ham Radio Sent: Sunday, February 23, 2014 7:46 PM To: Elecraft Group Subject: Re: [Elecraft] K3 issue in CW mode I figured out the + now looking to get rid of the T. Keith AK6ZZ -Original Message- From: Keith Heimbold Sent: Sunday, February 23, 2014 6:12 PM To: Elecraft Group Subject: [Elecraft] K3 issue in CW mode I just turned on my 2m transverter and when I went back to 6m my CW doesn't work. The display shows + and T and I don't get any power out in CW. Other modes work fine. I looked at instructions but couldn't figure it out. Keith AK6ZZ Sent from my iPhone please excuse typos __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 issue in CW mode
Nope, if the T is showing, the rig is in TEST mode. Hold down the right hand portion of the MODE switch until it goes away and it'll put out power again. Jim - W0EB Turn on VOX... ...bill nr4c Sent from my Verizon Wireless 4G LTE DROID Joel Black w4...@charter.net wrote: I think the T just indicates CW decode. Hold the TEXT DEC button and then rotate the VFO B knob until you get OFF in the VFO B section of the display. 73, Joel - W4JBB On 2/23/14, 10:44 PM, Ham Radio wrote: In CW mode it still will not get any power out and I am stuck with the T in the lower right part of the display. CW was working fine until I went to 2m and then returned back to 6m and then subsequently to HF. All other modes are working fine. Any thoughts or ideas of what I have done would be helpful. Thanks, Keith AK6ZZ -Original Message- From: Ham Radio Sent: Sunday, February 23, 2014 7:46 PM To: Elecraft Group Subject: Re: [Elecraft] K3 issue in CW mode I figured out the + now looking to get rid of the T. Keith AK6ZZ -Original Message- From: Keith Heimbold Sent: Sunday, February 23, 2014 6:12 PM To: Elecraft Group Subject: [Elecraft] K3 issue in CW mode I just turned on my 2m transverter and when I went back to 6m my CW doesn't work. The display shows + and T and I don't get any power out in CW. Other modes work fine. I looked at instructions but couldn't figure it out. Keith AK6ZZ Sent from my iPhone please excuse typos __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 issue in CW mode
PS, disregard my last -- not enough coffee. Joel was correct on that and it would have been the TX that was flashing if it were in the TEST mode -- my bad. Jim - W0EB Turn on VOX... ...bill nr4c Sent from my Verizon Wireless 4G LTE DROID Joel Black w4...@charter.net wrote: I think the T just indicates CW decode. Hold the TEXT DEC button and then rotate the VFO B knob until you get OFF in the VFO B section of the display. 73, Joel - W4JBB On 2/23/14, 10:44 PM, Ham Radio wrote: In CW mode it still will not get any power out and I am stuck with the T in the lower right part of the display. CW was working fine until I went to 2m and then returned back to 6m and then subsequently to HF. All other modes are working fine. Any thoughts or ideas of what I have done would be helpful. Thanks, Keith AK6ZZ -Original Message- From: Ham Radio Sent: Sunday, February 23, 2014 7:46 PM To: Elecraft Group Subject: Re: [Elecraft] K3 issue in CW mode I figured out the + now looking to get rid of the T. Keith AK6ZZ -Original Message- From: Keith Heimbold Sent: Sunday, February 23, 2014 6:12 PM To: Elecraft Group Subject: [Elecraft] K3 issue in CW mode I just turned on my 2m transverter and when I went back to 6m my CW doesn't work. The display shows + and T and I don't get any power out in CW. Other modes work fine. I looked at instructions but couldn't figure it out. Keith AK6ZZ Sent from my iPhone please excuse typos __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 issue in CW mode
It was the VOX issue. Now need to understand why when I went from the transverter my settings changed in CW. Everything is good again. Thanks everyone! Keith AK6ZZ Sent from my iPhone please excuse typos On Feb 24, 2014, at 6:15 AM, Jim Sheldon w...@cox.net wrote: PS, disregard my last -- not enough coffee. Joel was correct on that and it would have been the TX that was flashing if it were in the TEST mode -- my bad. Jim - W0EB Turn on VOX... ...bill nr4c Sent from my Verizon Wireless 4G LTE DROID Joel Black w4...@charter.net wrote: I think the T just indicates CW decode. Hold the TEXT DEC button and then rotate the VFO B knob until you get OFF in the VFO B section of the display. 73, Joel - W4JBB On 2/23/14, 10:44 PM, Ham Radio wrote: In CW mode it still will not get any power out and I am stuck with the T in the lower right part of the display. CW was working fine until I went to 2m and then returned back to 6m and then subsequently to HF. All other modes are working fine. Any thoughts or ideas of what I have done would be helpful. Thanks, Keith AK6ZZ -Original Message- From: Ham Radio Sent: Sunday, February 23, 2014 7:46 PM To: Elecraft Group Subject: Re: [Elecraft] K3 issue in CW mode I figured out the + now looking to get rid of the T. Keith AK6ZZ -Original Message- From: Keith Heimbold Sent: Sunday, February 23, 2014 6:12 PM To: Elecraft Group Subject: [Elecraft] K3 issue in CW mode I just turned on my 2m transverter and when I went back to 6m my CW doesn't work. The display shows + and T and I don't get any power out in CW. Other modes work fine. I looked at instructions but couldn't figure it out. Keith AK6ZZ Sent from my iPhone please excuse typos __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 issue in CW mode
Nope, the T indicates TEXT DECODE ...nr4c Sent from my Verizon Wireless 4G LTE DROID Jim Sheldon w...@cox.net wrote: Nope, if the T is showing, the rig is in TEST mode. Hold down the right hand portion of the MODE switch until it goes away and it'll put out power again. Jim - W0EB Turn on VOX... ...bill nr4c Sent from my Verizon Wireless 4G LTE DROID Joel Black w4...@charter.net wrote: I think the T just indicates CW decode. Hold the TEXT DEC button and then rotate the VFO B knob until you get OFF in the VFO B section of the display. 73, Joel - W4JBB On 2/23/14, 10:44 PM, Ham Radio wrote: In CW mode it still will not get any power out and I am stuck with the T in the lower right part of the display. CW was working fine until I went to 2m and then returned back to 6m and then subsequently to HF. All other modes are working fine. Any thoughts or ideas of what I have done would be helpful. Thanks, Keith AK6ZZ -Original Message- From: Ham Radio Sent: Sunday, February 23, 2014 7:46 PM To: Elecraft Group Subject: Re: [Elecraft] K3 issue in CW mode I figured out the + now looking to get rid of the T. Keith AK6ZZ -Original Message- From: Keith Heimbold Sent: Sunday, February 23, 2014 6:12 PM To: Elecraft Group Subject: [Elecraft] K3 issue in CW mode I just turned on my 2m transverter and when I went back to 6m my CW doesn't work. The display shows + and T and I don't get any power out in CW. Other modes work fine. I looked at instructions but couldn't figure it out. Keith AK6ZZ Sent from my iPhone please excuse typos __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 issue in CW mode
I figured out the + now looking to get rid of the T. Keith AK6ZZ -Original Message- From: Keith Heimbold Sent: Sunday, February 23, 2014 6:12 PM To: Elecraft Group Subject: [Elecraft] K3 issue in CW mode I just turned on my 2m transverter and when I went back to 6m my CW doesn't work. The display shows + and T and I don't get any power out in CW. Other modes work fine. I looked at instructions but couldn't figure it out. Keith AK6ZZ Sent from my iPhone please excuse typos __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 issue in CW mode
In CW mode it still will not get any power out and I am stuck with the T in the lower right part of the display. CW was working fine until I went to 2m and then returned back to 6m and then subsequently to HF. All other modes are working fine. Any thoughts or ideas of what I have done would be helpful. Thanks, Keith AK6ZZ -Original Message- From: Ham Radio Sent: Sunday, February 23, 2014 7:46 PM To: Elecraft Group Subject: Re: [Elecraft] K3 issue in CW mode I figured out the + now looking to get rid of the T. Keith AK6ZZ -Original Message- From: Keith Heimbold Sent: Sunday, February 23, 2014 6:12 PM To: Elecraft Group Subject: [Elecraft] K3 issue in CW mode I just turned on my 2m transverter and when I went back to 6m my CW doesn't work. The display shows + and T and I don't get any power out in CW. Other modes work fine. I looked at instructions but couldn't figure it out. Keith AK6ZZ Sent from my iPhone please excuse typos __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html