RE: Problem getting Dag group to do initial seed
Try grabbing a full backup from the active copy and then reseed. We used to get this occasionally - even when it was a brand new database, the initial seeding of a passive copy would fail saying there were log files missing. I opened a PSS call for it, but they determined that AD replication wasn't working properly, so I gave up that route. From: bounce-9565140-8066...@lyris.sunbelt-software.com [mailto:bounce-9565140-8066...@lyris.sunbelt-software.com] On Behalf Of Greg Olson Sent: 30 November 2012 19:38 To: MS-Exchange Admin Issues Subject: Problem getting Dag group to do initial seed Hi Everyone, So here's my issue, I'm trying to get an initial seed of a few databases (Exchange 2010 SP1) from our office in NJ over to our DR site in SF. I have 7 db's ranging in size from 8gb to 41gb, and I have managed to get two of them (a 12gb and a 34gb) to do the initial replication, but the rest seem to just keep failing with an error similar to this: The required log file 43887 for NJ-Users-U-Z\XXXMailServer is missing on the active copy. If you removed the log file, please replace it. If the log file is lost, the database copy will need to be reseeded using Update-MailboxDatabaseCop There is approx. 70ms of latency, and a 10mb circuit between locations, and it seems to do the copy over just fine, but then they always error with something similar to the above. Any ideas on how to get this working? I've checked and the backups are not running during the transfer time as well. Thanks, -Greg Olson --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
RE: Send As not working with fake email addresses
You can't use fake email addresses in Exchange 2010. If your organization is authoritative for a domain, and the email doesn't exist, the behavior the OP describes is expected. This is an anti-spam measure. Works as designed and intended. From: Joseph L. Casale [mailto:jcas...@activenetwerx.com] Sent: Monday, December 3, 2012 6:29 AM To: MS-Exchange Admin Issues Subject: RE: Send As not working with fake email addresses Add a receive-connector as an application relay only that is scoped to those hosts. From: Al Rose [arose...@gmail.com] Sent: Monday, December 03, 2012 3:17 AM To: MS-Exchange Admin Issues Subject: Send As not working with fake email addresses Hi, I use to setup applications notifications email addresses to something meaningful to me for sending notifications/reports... For instance, we receive WSUS notifications from w...@acme.commailto:w...@acme.com even though the email address w...@acme.commailto:w...@acme.com does not exist in our Organization. So far all notifications systems are setup to use our Exchange 2003 server and it works fine now if i try to switch these systems to our 2010 servers i receive this error: The server response was: 5.7.1 Client does not have permissions to send as this sender --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
RE: Problem getting Dag group to do initial seed
Tim McMichael has a blog post on this. I can't right now, but I'll hunt it up later if that isn't enough of a hint. From: Sobey, Richard A [mailto:r.so...@imperial.ac.uk] Sent: Monday, December 3, 2012 5:13 AM To: MS-Exchange Admin Issues Subject: RE: Problem getting Dag group to do initial seed Try grabbing a full backup from the active copy and then reseed. We used to get this occasionally - even when it was a brand new database, the initial seeding of a passive copy would fail saying there were log files missing. I opened a PSS call for it, but they determined that AD replication wasn't working properly, so I gave up that route. From: bounce-9565140-8066...@lyris.sunbelt-software.commailto:bounce-9565140-8066...@lyris.sunbelt-software.com [mailto:bounce-9565140-8066...@lyris.sunbelt-software.com] On Behalf Of Greg Olson Sent: 30 November 2012 19:38 To: MS-Exchange Admin Issues Subject: Problem getting Dag group to do initial seed Hi Everyone, So here's my issue, I'm trying to get an initial seed of a few databases (Exchange 2010 SP1) from our office in NJ over to our DR site in SF. I have 7 db's ranging in size from 8gb to 41gb, and I have managed to get two of them (a 12gb and a 34gb) to do the initial replication, but the rest seem to just keep failing with an error similar to this: The required log file 43887 for NJ-Users-U-Z\XXXMailServer is missing on the active copy. If you removed the log file, please replace it. If the log file is lost, the database copy will need to be reseeded using Update-MailboxDatabaseCop There is approx. 70ms of latency, and a 10mb circuit between locations, and it seems to do the copy over just fine, but then they always error with something similar to the above. Any ideas on how to get this working? I've checked and the backups are not running during the transfer time as well. Thanks, -Greg Olson --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
RE: Change Default Address Book globally?
Joe, I'm having the same issue. I also don't have an Address Book Policy, but my newly migrated users to Exchange 2010 are getting the 'All Contacts' as the default list when they click on the Outlook Address Book. Did you have 'All Rooms' in the Offline Address Book settings twice? I don't have anything listed twice, but can't figure out what is causing this. I do have 'All Contacts, Groups, Rooms, Users, and Public Folders' in my OAB settings. We're just informing our Help Desk to adjust their Outlook settings as a post-migration process. From: jhea...@dfg.ca.gov To: exchangelist@lyris.sunbelt-software.com Subject: RE: Change Default Address Book globally? Date: Thu, 29 Nov 2012 20:03:43 + Awesome, I’ll remove it from the policy. Thanks Michael. If you ever get out to Sacramento, let me know, I’ll buy ya a couple beers. From: Michael B. Smith [mailto:mich...@smithcons.com] Sent: Thursday, November 29, 2012 11:44 AM To: Heaton, Joseph@DFG; MS-Exchange Admin Issues Subject: RE: Change Default Address Book globally? It is included already in the GAL. You are just including it twice. From: Heaton, Joseph@DFG [mailto:jhea...@dfg.ca.gov] Sent: Thursday, November 29, 2012 2:09 PM To: MS-Exchange Admin Issues Subject: RE: Change Default Address Book globally? And is there a way to include the All Rooms without making it the default for everyone? From: Michael B. Smith [mailto:michael@smithconscom] Sent: Thursday, November 29, 2012 9:49 AM To: Heaton, Joseph@DFG; MS-Exchange Admin Issues Subject: RE: Change Default Address Book globally? ayup From: Heaton, Joseph@DFG [mailto:jhea...@dfg.ca.gov] Sent: Thursday, November 29, 2012 12:31 PM To: MS-Exchange Admin Issues Subject: RE: Change Default Address Book globally? I don’t have an Address Book Policy. We are at SP2. I have only one Offline Address Book, the Default. In that policy, I have Include the default Global Address List, and I have checked the Include the following address lists: All Rooms. Is that what is causing the All Rooms to show up by default when they click on Address Book in Outlook? From: Michael B. Smith [mailto:michael@smithconscom] Sent: Thursday, November 29, 2012 8:04 AM To: Heaton, Joseph@DFG; MS-Exchange Admin Issues Subject: RE: Change Default Address Book globally? There is exactly one default address book. It will either be the one you specify in an Address Book Policy (Exchange 2010 SP2 and above) or the largest one available to the user. Now, the default Offline Address Book is a bit different. You can specify which is the default in EMC. You can also specify the default on a per-mailbox database level. You can also specify an address book policy on a per-user basis (Exchange 2010 SP2 and above). From: Heaton, Joseph@DFG [mailto:jhea...@dfg.ca.gov] Sent: Thursday, November 29, 2012 10:48 AM To: MS-Exchange Admin Issues Subject: Change Default Address Book globally? Is it possible to change what address book shows for a person in Outlook when they click the Address Book button, but from a global standpoint? For some reason, when we’re imaging machines, and the user logs in for the first time, as a brand new Outlook user, the All Rooms list shows when they click the Address Book. I know how to change this on a client-side level, but was just wondering if there was a way to do this for them, since we’ve got about another 3,000 machines to image and push out. Thanks, Joe Heaton Enterprise Server Support CA Department of Fish and Game 1807 13th Street, Suite 201 Sacramento, CA 95811 Desk: (916) 557-3422 --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com
RE: Send As not working with fake email addresses
Al, I encountered the same issue. Joseph Casale is correct, you must create a receive-connector specific to devices that need to relay off Exchange 2010 Hub Transport servers. From: mich...@smithcons.com To: exchangelist@lyris.sunbelt-software.com Subject: RE: Send As not working with fake email addresses Date: Mon, 3 Dec 2012 12:51:23 + You can’t use fake email addresses in Exchange 2010. If your organization is authoritative for a domain, and the email doesn’t exist, the behavior the OP describes is expected. This is an anti-spam measure. Works as designed and intended. From: Joseph L. Casale [mailto:jcas...@activenetwerx.com] Sent: Monday, December 3, 2012 6:29 AM To: MS-Exchange Admin Issues Subject: RE: Send As not working with fake email addresses Add a receive-connector as an application relay only that is scoped to those hosts. From: Al Rose [arose...@gmail.com] Sent: Monday, December 03, 2012 3:17 AM To: MS-Exchange Admin Issues Subject: Send As not working with fake email addresses Hi, I use to setup applications notifications email addresses to something meaningful to me for sending notifications/reports... For instance, we receive WSUS notifications from w...@acme.com even though the email address w...@acme.com does not exist in our Organization. So far all notifications systems are setup to use our Exchange 2003 server and it works fine now if i try to switch these systems to our 2010 servers i receive this error: The server response was: 5.7.1 Client does not have permissions to send as this sender --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
RE: Problem getting Dag group to do initial seed
Thanks Michael I'm searching for it now. -Greg From: Michael B. Smith [mailto:mich...@smithcons.com] Sent: Monday, December 03, 2012 4:52 AM To: MS-Exchange Admin Issues Subject: RE: Problem getting Dag group to do initial seed Tim McMichael has a blog post on this. I can't right now, but I'll hunt it up later if that isn't enough of a hint. From: Sobey, Richard A [mailto:r.so...@imperial.ac.uk]mailto:[mailto:r.so...@imperial.ac.uk] Sent: Monday, December 3, 2012 5:13 AM To: MS-Exchange Admin Issues Subject: RE: Problem getting Dag group to do initial seed Try grabbing a full backup from the active copy and then reseed. We used to get this occasionally - even when it was a brand new database, the initial seeding of a passive copy would fail saying there were log files missing. I opened a PSS call for it, but they determined that AD replication wasn't working properly, so I gave up that route. From: bounce-9565140-8066...@lyris.sunbelt-software.commailto:bounce-9565140-8066...@lyris.sunbelt-software.com [mailto:bounce-9565140-8066...@lyris.sunbelt-software.com] On Behalf Of Greg Olson Sent: 30 November 2012 19:38 To: MS-Exchange Admin Issues Subject: Problem getting Dag group to do initial seed Hi Everyone, So here's my issue, I'm trying to get an initial seed of a few databases (Exchange 2010 SP1) from our office in NJ over to our DR site in SF. I have 7 db's ranging in size from 8gb to 41gb, and I have managed to get two of them (a 12gb and a 34gb) to do the initial replication, but the rest seem to just keep failing with an error similar to this: The required log file 43887 for NJ-Users-U-Z\XXXMailServer is missing on the active copy. If you removed the log file, please replace it. If the log file is lost, the database copy will need to be reseeded using Update-MailboxDatabaseCop There is approx. 70ms of latency, and a 10mb circuit between locations, and it seems to do the copy over just fine, but then they always error with something similar to the above. Any ideas on how to get this working? I've checked and the backups are not running during the transfer time as well. Thanks, -Greg Olson --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
RE: One contact list for a company
I think the best thing would be to load them into the GAL. Updating them might be a challenge though. If they want one contact list for all contacts the GAL is the way to go IMO. Mike This message (including any attachments) contains confidential information intended for a specific individual and purpose, and is protected by law. If you are not the intended recipient, you should delete this message. Any disclosure, copying, or distribution of this message, or the taking of any action based on it, is strictly prohibited without the prior consent of its author. From: Matt Plahtinsky [mailto:cbusitl...@gmail.com] Sent: Monday, December 03, 2012 3:29 PM To: MS-Exchange Admin Issues Subject: One contact list for a company I have a company (8 users, 4K contacts) that use office 365 and want to work off of only one contact list for outlook and mobile devices. Does anyone have any ideas on how I might be able to accomplish this? They would like when one person updates a contact to update on all computers and phones. If it were only outlook that would be easy (shared mailbox) but adding in the mobile devices I'm at a loss for idea's. The only way I can think to accomplish this would be to export the master contact list to each computer then whenever anyone updates a contact send a vcard to everyone. --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
RE: Change Default Address Book globally?
You shouldn't have anything other than the check box for Include Global Address List. From: Tanya Pinetti [mailto:tpine...@outlook.com] Sent: Monday, December 3, 2012 2:59 PM To: MS-Exchange Admin Issues Subject: RE: Change Default Address Book globally? Joe, I'm having the same issue. I also don't have an Address Book Policy, but my newly migrated users to Exchange 2010 are getting the 'All Contacts' as the default list when they click on the Outlook Address Book. Did you have 'All Rooms' in the Offline Address Book settings twice? I don't have anything listed twice, but can't figure out what is causing this. I do have 'All Contacts, Groups, Rooms, Users, and Public Folders' in my OAB settings. We're just informing our Help Desk to adjust their Outlook settings as a post-migration process. From: jhea...@dfg.ca.govmailto:jhea...@dfg.ca.gov To: exchangelist@lyris.sunbelt-software.commailto:exchangelist@lyris.sunbelt-software.com Subject: RE: Change Default Address Book globally? Date: Thu, 29 Nov 2012 20:03:43 + Awesome, I'll remove it from the policy. Thanks Michael. If you ever get out to Sacramento, let me know, I'll buy ya a couple beers. From: Michael B. Smith [mailto:mich...@smithcons.com] Sent: Thursday, November 29, 2012 11:44 AM To: Heaton, Joseph@DFG; MS-Exchange Admin Issues Subject: RE: Change Default Address Book globally? It is included already in the GAL. You are just including it twice. From: Heaton, Joseph@DFG [mailto:jhea...@dfg.ca.gov] Sent: Thursday, November 29, 2012 2:09 PM To: MS-Exchange Admin Issues Subject: RE: Change Default Address Book globally? And is there a way to include the All Rooms without making it the default for everyone? From: Michael B. Smith [mailto:michael@smithconscommailto:mich...@smithcons.com] Sent: Thursday, November 29, 2012 9:49 AM To: Heaton, Joseph@DFG; MS-Exchange Admin Issues Subject: RE: Change Default Address Book globally? ayup From: Heaton, Joseph@DFG [mailto:jhea...@dfg.ca.gov] Sent: Thursday, November 29, 2012 12:31 PM To: MS-Exchange Admin Issues Subject: RE: Change Default Address Book globally? I don't have an Address Book Policy. We are at SP2. I have only one Offline Address Book, the Default. In that policy, I have Include the default Global Address List, and I have checked the Include the following address lists: All Rooms. Is that what is causing the All Rooms to show up by default when they click on Address Book in Outlook? From: Michael B. Smith [mailto:michael@smithconscommailto:mich...@smithcons.com] Sent: Thursday, November 29, 2012 8:04 AM To: Heaton, Joseph@DFG; MS-Exchange Admin Issues Subject: RE: Change Default Address Book globally? There is exactly one default address book. It will either be the one you specify in an Address Book Policy (Exchange 2010 SP2 and above) or the largest one available to the user. Now, the default Offline Address Book is a bit different. You can specify which is the default in EMC. You can also specify the default on a per-mailbox database level. You can also specify an address book policy on a per-user basis (Exchange 2010 SP2 and above). From: Heaton, Joseph@DFG [mailto:jhea...@dfg.ca.gov] Sent: Thursday, November 29, 2012 10:48 AM To: MS-Exchange Admin Issues Subject: Change Default Address Book globally? Is it possible to change what address book shows for a person in Outlook when they click the Address Book button, but from a global standpoint? For some reason, when we're imaging machines, and the user logs in for the first time, as a brand new Outlook user, the All Rooms list shows when they click the Address Book. I know how to change this on a client-side level, but was just wondering if there was a way to do this for them, since we've got about another 3,000 machines to image and push out. Thanks, Joe Heaton Enterprise Server Support CA Department of Fish and Game 1807 13th Street, Suite 201 Sacramento, CA 95811 Desk: (916) 557-3422 --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here:
RE: Problem getting Dag group to do initial seed
Well, I just hunted for it and can't find it. Long story short: Remove all copies from the passive node. Cleanup all files on the passive node. Add copies using shell with -seedingPostponed. Enable circular logging on each database. Update the database copy to seed it. Disable circular logging if you choose. I'll have a blog post on this soon. Tim Perhaps I just missed it, and you found it! From: Greg Olson [mailto:gol...@markettools.com] Sent: Monday, December 3, 2012 3:42 PM To: MS-Exchange Admin Issues Subject: RE: Problem getting Dag group to do initial seed Thanks Michael I'm searching for it now. -Greg From: Michael B. Smith [mailto:mich...@smithcons.com] Sent: Monday, December 03, 2012 4:52 AM To: MS-Exchange Admin Issues Subject: RE: Problem getting Dag group to do initial seed Tim McMichael has a blog post on this. I can't right now, but I'll hunt it up later if that isn't enough of a hint. From: Sobey, Richard A [mailto:r.so...@imperial.ac.uk]mailto:[mailto:r.so...@imperial.ac.uk] Sent: Monday, December 3, 2012 5:13 AM To: MS-Exchange Admin Issues Subject: RE: Problem getting Dag group to do initial seed Try grabbing a full backup from the active copy and then reseed. We used to get this occasionally - even when it was a brand new database, the initial seeding of a passive copy would fail saying there were log files missing. I opened a PSS call for it, but they determined that AD replication wasn't working properly, so I gave up that route. From: bounce-9565140-8066...@lyris.sunbelt-software.commailto:bounce-9565140-8066...@lyris.sunbelt-software.com [mailto:bounce-9565140-8066...@lyris.sunbelt-software.com] On Behalf Of Greg Olson Sent: 30 November 2012 19:38 To: MS-Exchange Admin Issues Subject: Problem getting Dag group to do initial seed Hi Everyone, So here's my issue, I'm trying to get an initial seed of a few databases (Exchange 2010 SP1) from our office in NJ over to our DR site in SF. I have 7 db's ranging in size from 8gb to 41gb, and I have managed to get two of them (a 12gb and a 34gb) to do the initial replication, but the rest seem to just keep failing with an error similar to this: The required log file 43887 for NJ-Users-U-Z\XXXMailServer is missing on the active copy. If you removed the log file, please replace it. If the log file is lost, the database copy will need to be reseeded using Update-MailboxDatabaseCop There is approx. 70ms of latency, and a 10mb circuit between locations, and it seems to do the copy over just fine, but then they always error with something similar to the above. Any ideas on how to get this working? I've checked and the backups are not running during the transfer time as well. Thanks, -Greg Olson --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
RE: Send As not working with fake email addresses
Greetings, We use a similar relay connector approach - if this is an EXCHANGE 2010 SMTP simple relay question? We meet with the internal admin/customer, and if we agree and vet the host, we add the explicit host IP into the connector so it can relay using our production SMTP servers. However, we only do this for internal systems we have full host admin access to in case there are issues. Not sure if this helps on this thread but trying to assist. Thanks Dana From: Joseph L. Casale [mailto:jcas...@activenetwerx.com] Sent: Monday, December 03, 2012 5:29 AM To: MS-Exchange Admin Issues Subject: RE: Send As not working with fake email addresses Add a receive-connector as an application relay only that is scoped to those hosts. From: Al Rose [arose...@gmail.com] Sent: Monday, December 03, 2012 3:17 AM To: MS-Exchange Admin Issues Subject: Send As not working with fake email addresses Hi, I use to setup applications notifications email addresses to something meaningful to me for sending notifications/reports... For instance, we receive WSUS notifications from w...@acme.commailto:w...@acme.com even though the email address w...@acme.commailto:w...@acme.com does not exist in our Organization. So far all notifications systems are setup to use our Exchange 2003 server and it works fine now if i try to switch these systems to our 2010 servers i receive this error: The server response was: 5.7.1 Client does not have permissions to send as this sender --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
