Re: filmscanners: Device Profile in VueScan
Maris writes ... From: Ramesh Kumar_C [EMAIL PROTECTED] | Maris V. Lidaka, wrote: | Based on your statement, following is my understanding. | | Minolta will have provided a Profile file, which will be laying some where | in my PC. Vuescan will use this profile when Device RGB is selected in | Color | Color Space. That is correct. Vuescan is not aware of any association any scanner has with any device profile located anywhere on your computer. When you choose device RGB it is up to you to find (or create) that profile and associate it with the scanned RGB values. Otherwise, if you choose one of the other color spaces, Vuescan will convert from the device profile (as determined by Ed Hamrick and built into Vuescan) to that color space. If you choose device RGB, you need to be careful of whether the media chosen is negative, positive or image, before you will be able to appropriately associate (assign) some device profile you may have. I believe image and slide film is straight-forward (assuming you have a manufacturer's device profile), ... negative film is not straight-forward because the RGB values are handled by Vuescan's own profile for the scanner. (my understanding goes back to experience and correspondence with early versions of VS v.7 ... has anything changed?) shAf :o) shAf :o)
RE: filmscanners: Device Profile in VueScan
Robert E wrote: There are two Minolta profiles on your system (c:\windows\color if using a PC).One for negative and one for positive images. Yes, there should be 2 profiles, I can see 2 profiles in PS6. The Vuescan help file states that Device RGB is only useful if you select image as the media type. From the Vuescan help file...The Device RGB color space doesn't embed any ICC profile into the TIFF or JPEG files, and outputs images in the color space of the device. The Device RGB option is only useful when Device|Media type is set to Image Note that no profile is embedded. This I did not know, thanks for the information. I should have read help more carefully. I am not sure what you are trying to do, but suspect you would be best served to use Adobe RGB as you working space, select either image, slide, or I will be using the scanned output for a) Viewing b) Webpage I have not even thought of printing smile. I am not planning to use Device RGB as workingspace. I am new to this scanning and still in the process of finding out the workflow. Initially I was thinking of archiving in Device RGB and now this seems to impossible because I have negatives. Thanks Ramesh Thanks Ramesh
Re: filmscanners: Device Profile in VueScan
I am not sure this has changed but I think so - perhaps Ed will answer this. It may have changed when he (not too long ago) added the Device Profile option to the color space menu for this very reason. I believe it picks up the scanner's color profile selection because I had set my Nikon LS-30 for ColorMatch and Vuescan for Device Profile and scanned a negative, and in some fashion I saw that the image was profiled in ColorMatch (I don't have PhotoShop so I'm somewhat at a loss to check for sure). Maris - Original Message - From: shAf [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Wednesday, June 06, 2001 12:22 AM Subject: Re: filmscanners: Device Profile in VueScan | Maris writes ... | | From: Ramesh Kumar_C [EMAIL PROTECTED] | | Maris V. Lidaka, wrote: | | Based on your statement, following is my understanding. | | | | Minolta will have provided a Profile file, which will be laying | some where | | in my PC. Vuescan will use this profile when Device RGB is | selected in | | Color | Color Space. | | That is correct. | | Vuescan is not aware of any association any scanner has with any | device profile located anywhere on your computer. When you choose | device RGB it is up to you to find (or create) that profile and | associate it with the scanned RGB values. | Otherwise, if you choose one of the other color spaces, Vuescan | will convert from the device profile (as determined by Ed Hamrick and | built into Vuescan) to that color space. If you choose device RGB, | you need to be careful of whether the media chosen is negative, | positive or image, before you will be able to appropriately associate | (assign) some device profile you may have. I believe image and | slide film is straight-forward (assuming you have a manufacturer's | device profile), ... negative film is not straight-forward because | the RGB values are handled by Vuescan's own profile for the scanner. | (my understanding goes back to experience and correspondence with | early versions of VS v.7 ... has anything changed?) | | shAf :o) | | shAf :o) | | |
RE: filmscanners: Device Profile in VueScan
Maris writes ... I am not sure this has changed but I think so - perhaps Ed will answer this. It may have changed when he (not too long ago) added Device Profile option to the color space the menu for this very reason. I believe it picks up the scanner's color profile selection because I had set my Nikon LS-30 for ColorMatch and Vuescan for Device Profile and scanned a negative, and in some fashion I saw that the image was profiled in ColorMatch (I don't have PhotoShop so I'm somewhat at a loss to check for sure). I believe if you would have had Photoshop, you would have found no profile had been associated with the scanned image with device RGB chosen. (How did you determine I saw that the image was profiled in ColorMatch?) The RGB values are intended to belong to the device, but no profile is embedded (note the color space option does NOT refer to any profile ... the option is device RGB). I believe Ed added this option so that, with Photoshop, you could then assign the appropriate profile ... for example a device profile which may have shipped with your Nikon. You could then properly convert to a working space of your choice. However, I have found this doesn't work with negatives, because when subtracting the mask Vuescan unavoidably touches the RGB values with Ed's built-in device profile for the scanner ... therefore you can no longer use the Nikon device profile because it is different than the one Ed built-in. You CAN use the Nikon device profile if you scanned a slide because Ed's profile doesn't come into play. You almost have to have Photoshop to properly play with and evaluate this device RGB option. If you are using a different non-profile savvy image editor, you are probably better off choosing sRGB in Vuescan. shAf :o)
RE: filmscanners: Device Profile in VueScan
Ramesh wrote: I am not planning to use Device RGB as workingspace. I am new to this scanning and still in the process of finding out the workflow. Initially I was thinking of archiving in Device RGB and now this seems to impossible because I have negatives. I'm pretty sure to get in trouble for saying this, which is not a new sensation for me. ;-) If you're archiving, Device RGB would *not* be the color space to choose, because it reflects a device that may be broken and unserviceable or out of production in 1-10 years. By the same token, I would not use any of the current choices of color space, because they may also change or be discontinued in a matter of time. Backward Mobility in electonics and software might be a nice thought, but it's more observed in its absence than its adherence! I feel that sRGB, as limited as it's said to be, will be around a bit longer than many of the other standards, since there's been a lot of television commited to that particular standard (if standard is still a working word :-) ). I'm not Nostradamus, so my predictions are no more reliable than any other guy's--but I'd say that JPEG and sRGB will at least be *accesssible* for a while to come. TIFF, Gif and some other formats will be, too. Beyond that, cross your fingers and save your negatives! :-) I'm hoping that other--wiser!--heads will pop in here, and soon. It's not a small problem. Best regards--LRA Get 250 color business cards for FREE! http://businesscards.lycos.com/vp/fastpath/
Re: filmscanners: Device Profile in VueScan
To the best of my knowledge Device Profile applies to Scan and to RAW scan. As to your second question, yes - Device Profile transfers the profile of the scanner. Vuescan itself does not apply a Vuescan profile. Maris - Original Message - From: Ramesh Kumar_C [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Tuesday, June 05, 2001 12:19 PM Subject: filmscanners: Device Profile in VueScan | Hi | I use Minolta Dimage Dual II with Vuescan. | | In VueScan, Is it good to use RAW scan or Scan with DeviceProfile? | | | In VueScan, If I select Device Profile, is it the profile of the scanner? | In my PS6.0, I see two profiles related to Minolta Dimage Dual II , but | none on Vuescan. | | Thanks in advance | Ramesh | |
RE: filmscanners: Device Profile in VueScan
Maris V. Lidaka, wrote: As to your second question, yes - Device Profile transfers the profile of the scanner. Vuescan itself does not apply a Vuescan profile. Thanks for the response. Based on your statement, following is my understanding. Minolta will have provided a Profile file, which will be laying some where in my PC. Vuescan will use this profile when Device RGB is selected in Color | Color Space. In VueScan, Color | Color Space shows just Device RGB. Device RGB seems to be generic and it does not specify the name of the device. I think VS picks the RIGHT profile depending on the scanner selected in Device | Mode. In PS6.0 Color space will have the name of the devices too; like Minolta Scan Dual II. Thanks Ramesh -Original Message- From: Maris V. Lidaka, Sr. [mailto:[EMAIL PROTECTED]] Sent: Tuesday, June 05, 2001 2:01 PM To: [EMAIL PROTECTED] Subject: Re: filmscanners: Device Profile in VueScan To the best of my knowledge Device Profile applies to Scan and to RAW scan. As to your second question, yes - Device Profile transfers the profile of the scanner. Vuescan itself does not apply a Vuescan profile. Maris - Original Message - From: Ramesh Kumar_C [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Tuesday, June 05, 2001 12:19 PM Subject: filmscanners: Device Profile in VueScan | Hi | I use Minolta Dimage Dual II with Vuescan. | | In VueScan, Is it good to use RAW scan or Scan with DeviceProfile? | | | In VueScan, If I select Device Profile, is it the profile of the scanner? | In my PS6.0, I see two profiles related to Minolta Dimage Dual II , but | none on Vuescan. | | Thanks in advance | Ramesh | |
Re: filmscanners: Device Profile in VueScan
I think you well find the following: There are two Minolta profiles on your system (c:\windows\color if using a PC).One for negative and one for positive images. The Vuescan help file states that Device RGB is only useful if you select image as the media type. From the Vuescan help file...The Device RGB color space doesn't embed any ICC profile into the TIFF or JPEG files, and outputs images in the color space of the device. The Device RGB option is only useful when Device|Media type is set to Image Note that no profile is embedded. The Minolta profiles are not recommended as working spaces. I am not sure what you are trying to do, but suspect you would be best served to use Adobe RGB as you working space, select either image, slide, or negative, as appropriate, under Device/Media type, and have Vuescan tag the crop files as Adobe RGB in the color tab. Vuescan well use the appropriate Minolta profile to characterize the scanner in producing the scan, and the tagged file will then open in Photoshop 6 without need for further conversion. Bob Wright Based on your statement, following is my understanding. Minolta will have provided a Profile file, which will be laying some where in my PC. Vuescan will use this profile when Device RGB is selected in Color | Color Space. In VueScan, Color | Color Space shows just Device RGB. Device RGB seems to be generic and it does not specify the name of the device. I think VS picks the RIGHT profile depending on the scanner selected in Device | Mode. In PS6.0 Color space will have the name of the devices too; like Minolta Scan Dual II. Thanks Ramesh -Original Message- From: Maris V. Lidaka, Sr. [mailto:[EMAIL PROTECTED]] Sent: Tuesday, June 05, 2001 2:01 PM To: [EMAIL PROTECTED] Subject: Re: filmscanners: Device Profile in VueScan To the best of my knowledge Device Profile applies to Scan and to RAW scan. As to your second question, yes - Device Profile transfers the profile of the scanner. Vuescan itself does not apply a Vuescan profile. Maris - Original Message - From: Ramesh Kumar_C [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Tuesday, June 05, 2001 12:19 PM Subject: filmscanners: Device Profile in VueScan | Hi | I use Minolta Dimage Dual II with Vuescan. | | In VueScan, Is it good to use RAW scan or Scan with DeviceProfile? | | | In VueScan, If I select Device Profile, is it the profile of the scanner? | In my PS6.0, I see two profiles related to Minolta Dimage Dual II , but | none on Vuescan. | | Thanks in advance | Ramesh | |
Re: filmscanners: Device Profile in VueScan
- Original Message - From: Ramesh Kumar_C [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Tuesday, June 05, 2001 6:13 PM Subject: RE: filmscanners: Device Profile in VueScan | Maris V. Lidaka, wrote: | As to your second question, yes - Device Profile transfers the profile | of | the scanner. Vuescan itself does not apply a Vuescan profile. | | Thanks for the response. | | Based on your statement, following is my understanding. | | Minolta will have provided a Profile file, which will be laying some where | in my PC. Vuescan will use this profile when Device RGB is selected in | Color | Color Space. That is correct. | In VueScan, Color | Color Space shows just Device RGB. Device RGB | seems to be generic and | it does not specify the name of the device. I think VS picks the RIGHT | profile depending on the scanner selected in | Device | Mode. That, too, is correct. It just accepts and throughputs the color space selected by or for the scanner. For example my Nikon LS-30 allows me select among 5 or 6 color spaces - whichever I choose in the Nikon software carries through Vuescan into Corel PhotoPaint. For my Epson flatbed it results in Epson's preset sRGB. | In PS6.0 Color space will have the name of the devices too; like Minolta | Scan Dual II. Unfortunately I haven't the foggiest - I use Corel PhotoPaint. Maris | | | | -Original Message- | From: Maris V. Lidaka, Sr. [mailto:[EMAIL PROTECTED]] | Sent: Tuesday, June 05, 2001 2:01 PM | To: [EMAIL PROTECTED] | Subject: Re: filmscanners: Device Profile in VueScan | | | To the best of my knowledge Device Profile applies to Scan and to RAW scan. | | As to your second question, yes - Device Profile transfers the profile of | the scanner. Vuescan itself does not apply a Vuescan profile. | | Maris | | - Original Message - | From: Ramesh Kumar_C [EMAIL PROTECTED] | To: [EMAIL PROTECTED] | Sent: Tuesday, June 05, 2001 12:19 PM | Subject: filmscanners: Device Profile in VueScan | | | | Hi | | I use Minolta Dimage Dual II with Vuescan. | | | | In VueScan, Is it good to use RAW scan or Scan with DeviceProfile? | | | | | | In VueScan, If I select Device Profile, is it the profile of the | scanner? | | In my PS6.0, I see two profiles related to Minolta Dimage Dual II , but | | none on Vuescan. | | | | Thanks in advance | | Ramesh | | | | | |