Re: [flexcoders] Flex2->IIS->7.0.2 HTTP 405 on /flex2gateway/
Tariq,in IIS, under the ISAPI tab (properties) take a look and see if the JRun ISAPI filter is loaded (green arrow)you can also change the verbose property in the {jrun4}\lib\wsconfig\{number}\jrun.ini to true and see if you can get further information. I'm not a Jrun expert so I think that's all I can do to help you.João FernandesOn 8/11/06, Tariq Ahmed < [EMAIL PROTECTED]> wrote: Ya, everything else works fine. I can even connect to the same .cfc via WSDL. So I tried the wsconfig thing, and I think that got me a bit further. It showed that IIS was configured, so I removed that, and then added it again. It created a wsconfig\2\jrun.dll, and I pointed IIS to use that for the ISAPI filter. Now I've upgraded to HTTP 500. :) Everything else in CF still works. Using service capture, I see the result coming back from /flex2gateway/ as: "A dynamic link library (DLL) initialization routine failed." I'll continue to poke around. Thanks!! João Fernandes wrote: Tariq, it seems strange that IIS doesn't know how to handle it. Can you run a cf page without issues it that IIS website? I just removed the ISAPI filter from my IIS website and http://localhost/flex2gateway/ went from blank page to 404 (500 if I used http://localhost/flex2gateway - without the last /) check with the WSconfig if you instance is mapped to your website. HTH, João Fernandes On 8/10/06, Tariq Ahmed <[EMAIL PROTECTED]> wrote: Hi Joao, thanks for the response! So this is a single server/integrated install. The c:\CFusionMX7\wwwroot\web-inf\web.xml has: MessageBrokerServlet /flex2gateway/* I also tried modifying true in services-config.xml, but to no avail... I don't think it's on the CF side, it seems as if IIS is blocking it before CF gets it. João Fernandes wrote: Tariq, can you check that server instance web.xml file if the /flex2gateway is there? Maybe that instance wasn't updated correcly. João Fernandes On 8/10/06, Tariq Ahmed <[EMAIL PROTECTED]> wrote: Anyone encounter this issue before? When using a RemoteObject, which works fine on my development environment - doesn't work on this one server. Flash Remoting is enabled in the CF Admin. Looking at the IIS Log FIle, the 405 is coming from invoking /flex2gateway/ On machines that work, I can do http://hostname/flex2gateway and get at least an HTTP 500, but get a 404 on this problem machine. The main diff on the problem machine is that it's hosting multiple sites. Does anyone know how to set up a manual mapping to /flex2gateway/ (what does it map to?). I found this thread: http://www.boyzoid.com/blog/index.cfm/2006/3/24/Flex-Builder-2Mystic-and-Multiple-URLs-on-one-server Which indicates that JVM higher than 1.4.2_05 is needed. This machine uses 1.4.2_09. Messages in this topic (2) Reply (via web post) | Start a new topic __._,_.___ -- Flexcoders Mailing List FAQ: http://groups.yahoo.com/group/flexcoders/files/flexcodersFAQ.txt Search Archives: http://www.mail-archive.com/flexcoders%40yahoogroups.com SPONSORED LINKS Web site design development Computer software development Software design and development Macromedia flex Software development best practice YAHOO! GROUPS LINKS Visit your group "flexcoders" on the web. To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. __,_._,___
Re: [flexcoders] Flex2->IIS->7.0.2 HTTP 405 on /flex2gateway/
Ya, everything else works fine. I can even connect to the same .cfc via WSDL. So I tried the wsconfig thing, and I think that got me a bit further. It showed that IIS was configured, so I removed that, and then added it again. It created a wsconfig\2\jrun.dll, and I pointed IIS to use that for the ISAPI filter. Now I've upgraded to HTTP 500. :) Everything else in CF still works. Using service capture, I see the result coming back from /flex2gateway/ as: "A dynamic link library (DLL) initialization routine failed." I'll continue to poke around. Thanks!! João Fernandes wrote: Tariq, it seems strange that IIS doesn't know how to handle it. Can you run a cf page without issues it that IIS website? I just removed the ISAPI filter from my IIS website and http://localhost/flex2gateway/ went from blank page to 404 (500 if I used http://localhost/flex2gateway - without the last /) check with the WSconfig if you instance is mapped to your website. HTH, João Fernandes On 8/10/06, Tariq Ahmed <[EMAIL PROTECTED]net> wrote: Hi Joao, thanks for the response! So this is a single server/integrated install. The c:\CFusionMX7\wwwroot\web-inf\web.xml has: MessageBrokerServlet /flex2gateway/* I also tried modifying true in services-config.xml, but to no avail... I don't think it's on the CF side, it seems as if IIS is blocking it before CF gets it. João Fernandes wrote: Tariq, can you check that server instance web.xml file if the /flex2gateway is there? Maybe that instance wasn't updated correcly. João Fernandes On 8/10/06, Tariq Ahmed <[EMAIL PROTECTED]net> wrote: Anyone encounter this issue before? When using a RemoteObject, which works fine on my development environment - doesn't work on this one server. Flash Remoting is enabled in the CF Admin. Looking at the IIS Log FIle, the 405 is coming from invoking /flex2gateway/ On machines that work, I can do http://hostname/flex2gateway and get at least an HTTP 500, but get a 404 on this problem machine. The main diff on the problem machine is that it's hosting multiple sites. Does anyone know how to set up a manual mapping to /flex2gateway/ (what does it map to?). I found this thread: http://www.boyzoid.com/blog/index.cfm/2006/3/24/Flex-Builder-2Mystic-and-Multiple-URLs-on-one-server Which indicates that JVM higher than 1.4.2_05 is needed. This machine uses 1.4.2_09. Messages in this topic (2) Reply (via web post) | Start a new topic __._,_.___ -- Flexcoders Mailing List FAQ: http://groups.yahoo.com/group/flexcoders/files/flexcodersFAQ.txt Search Archives: http://www.mail-archive.com/flexcoders%40yahoogroups.com YAHOO! GROUPS LINKS Visit your group "flexcoders" on the web. To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. __,_._,___
Re: [flexcoders] Flex2->IIS->7.0.2 HTTP 405 on /flex2gateway/
Tariq,it seems strange that IIS doesn't know how to handle it. Can you run a cf page without issues it that IIS website? I just removed the ISAPI filter from my IIS website and http://localhost/flex2gateway/ went from blank page to 404 (500 if I used http://localhost/flex2gateway - without the last /)check with the WSconfig if you instance is mapped to your website. HTH,João FernandesOn 8/10/06, Tariq Ahmed <[EMAIL PROTECTED]> wrote: Hi Joao, thanks for the response! So this is a single server/integrated install. The c:\CFusionMX7\wwwroot\web-inf\web.xml has: MessageBrokerServlet /flex2gateway/* I also tried modifying true in services-config.xml, but to no avail... I don't think it's on the CF side, it seems as if IIS is blocking it before CF gets it. João Fernandes wrote: Tariq, can you check that server instance web.xml file if the /flex2gateway is there? Maybe that instance wasn't updated correcly. João Fernandes On 8/10/06, Tariq Ahmed <[EMAIL PROTECTED]> wrote: Anyone encounter this issue before? When using a RemoteObject, which works fine on my development environment - doesn't work on this one server. Flash Remoting is enabled in the CF Admin. Looking at the IIS Log FIle, the 405 is coming from invoking /flex2gateway/ On machines that work, I can do http://hostname/flex2gateway and get at least an HTTP 500, but get a 404 on this problem machine. The main diff on the problem machine is that it's hosting multiple sites. Does anyone know how to set up a manual mapping to /flex2gateway/ (what does it map to?). I found this thread: http://www.boyzoid.com/blog/index.cfm/2006/3/24/Flex-Builder-2Mystic-and-Multiple-URLs-on-one-server Which indicates that JVM higher than 1.4.2_05 is needed. This machine uses 1.4.2_09. Messages in this topic (2) Reply (via web post) | Start a new topic __._,_.___ -- Flexcoders Mailing List FAQ: http://groups.yahoo.com/group/flexcoders/files/flexcodersFAQ.txt Search Archives: http://www.mail-archive.com/flexcoders%40yahoogroups.com SPONSORED LINKS Web site design development Computer software development Software design and development Macromedia flex Software development best practice YAHOO! GROUPS LINKS Visit your group "flexcoders" on the web. To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. __,_._,___
Re: [flexcoders] Flex2->IIS->7.0.2 HTTP 405 on /flex2gateway/
Hi Joao, thanks for the response! So this is a single server/integrated install. The c:\CFusionMX7\wwwroot\web-inf\web.xml has: MessageBrokerServlet /flex2gateway/* I also tried modifying true in services-config.xml, but to no avail... I don't think it's on the CF side, it seems as if IIS is blocking it before CF gets it. João Fernandes wrote: Tariq, can you check that server instance web.xml file if the /flex2gateway is there? Maybe that instance wasn't updated correcly. João Fernandes On 8/10/06, Tariq Ahmed <[EMAIL PROTECTED]net> wrote: Anyone encounter this issue before? When using a RemoteObject, which works fine on my development environment - doesn't work on this one server. Flash Remoting is enabled in the CF Admin. Looking at the IIS Log FIle, the 405 is coming from invoking /flex2gateway/ On machines that work, I can do http://hostname/flex2gateway and get at least an HTTP 500, but get a 404 on this problem machine. The main diff on the problem machine is that it's hosting multiple sites. Does anyone know how to set up a manual mapping to /flex2gateway/ (what does it map to?). I found this thread: http://www.boyzoid.com/blog/index.cfm/2006/3/24/Flex-Builder-2Mystic-and-Multiple-URLs-on-one-server Which indicates that JVM higher than 1.4.2_05 is needed. This machine uses 1.4.2_09. Messages in this topic (2) Reply (via web post) | Start a new topic __._,_.___ -- Flexcoders Mailing List FAQ: http://groups.yahoo.com/group/flexcoders/files/flexcodersFAQ.txt Search Archives: http://www.mail-archive.com/flexcoders%40yahoogroups.com SPONSORED LINKS Web site design development Computer software development Software design and development Macromedia flex Software development best practice YAHOO! GROUPS LINKS Visit your group "flexcoders" on the web. To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. __,_._,___
Re: [flexcoders] Flex2->IIS->7.0.2 HTTP 405 on /flex2gateway/
Tariq,can you check that server instance web.xml file if the /flex2gateway is there? Maybe that instance wasn't updated correcly. João FernandesOn 8/10/06, Tariq Ahmed <[EMAIL PROTECTED]> wrote: Anyone encounter this issue before? When using a RemoteObject, which works fine on my development environment - doesn't work on this one server. Flash Remoting is enabled in the CF Admin. Looking at the IIS Log FIle, the 405 is coming from invoking /flex2gateway/ On machines that work, I can do http://hostname/flex2gateway and get at least an HTTP 500, but get a 404 on this problem machine. The main diff on the problem machine is that it's hosting multiple sites. Does anyone know how to set up a manual mapping to /flex2gateway/ (what does it map to?). I found this thread: http://www.boyzoid.com/blog/index.cfm/2006/3/24/Flex-Builder-2Mystic-and-Multiple-URLs-on-one-server Which indicates that JVM higher than 1.4.2_05 is needed. This machine uses 1.4.2_09. __._,_.___ -- Flexcoders Mailing List FAQ: http://groups.yahoo.com/group/flexcoders/files/flexcodersFAQ.txt Search Archives: http://www.mail-archive.com/flexcoders%40yahoogroups.com SPONSORED LINKS Web site design development Computer software development Software design and development Macromedia flex Software development best practice YAHOO! GROUPS LINKS Visit your group "flexcoders" on the web. To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. __,_._,___
[flexcoders] Flex2->IIS->7.0.2 HTTP 405 on /flex2gateway/
Anyone encounter this issue before? When using a RemoteObject, which works fine on my development environment - doesn't work on this one server. Flash Remoting is enabled in the CF Admin. Looking at the IIS Log FIle, the 405 is coming from invoking /flex2gateway/ On machines that work, I can do http://hostname/flex2gateway and get at least an HTTP 500, but get a 404 on this problem machine. The main diff on the problem machine is that it's hosting multiple sites. Does anyone know how to set up a manual mapping to /flex2gateway/ (what does it map to?). I found this thread: http://www.boyzoid.com/blog/index.cfm/2006/3/24/Flex-Builder-2Mystic-and-Multiple-URLs-on-one-server Which indicates that JVM higher than 1.4.2_05 is needed. This machine uses 1.4.2_09. __._,_.___ -- Flexcoders Mailing List FAQ: http://groups.yahoo.com/group/flexcoders/files/flexcodersFAQ.txt Search Archives: http://www.mail-archive.com/flexcoders%40yahoogroups.com SPONSORED LINKS Web site design development Computer software development Software design and development Macromedia flex Software development best practice YAHOO! GROUPS LINKS Visit your group "flexcoders" on the web. To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. __,_._,___