Re: [Flexradio] Setting up Flex-1500/VSPManager/N1MM
At the gym right now but unless you've created serial port pairs in VSP you won't have any to select. Mike, KB7IUV Sent from my iPhone 5 On Jun 16, 2013, at 11:32 AM, Ken Alexander wrote: > Hi folks, > > I'm getting ready to use my Flex -1500 in a contest for the first time, and > that means getting it to work with N1MM Logger. > > I have PSDR 2.6.4 running along with VSP Manager and N1MM and am following > the instructions I found at > http://flexradiowiki.abrohamnealsoftware.com/mw/index.php?title=N1MM. I can't > believe I've already hit a brick wall on the very first step (well, step > 1.2). Step 1.2.1 says to select COM18 in the PSDR CAT Control setup. Can't > do it. Next to Port the pull down says None. Clicking on it gets you more of > the same; None. > > VSP Manager says there are no Hardware serial ports, which considering the > computer has no serial port connections kinda makes sense. On the other hand > it sounds unusual. The computer does have three USB 3.0 ports. > > The instructions aren't asking me to create COM18. It sounds like it's > supposed to be there already, but it isn't. Like I said, dead in the water > on step 1. > > Any help would be greatly appreciated. Thanks in advance. > > Ken Alexander > VE3HLS > > ___ > FlexRadio Systems Mailing List > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] Setting up Flex-1500/VSPManager/N1MM
Oh boy! It's right there: 4. You have installed a virtual serial port program and configured COM7/COM17 and COM8/COM18... How embarassing! Please disregard! On 2013-06-16 2:32 PM, Ken Alexander wrote: Hi folks, I'm getting ready to use my Flex -1500 in a contest for the first time, and that means getting it to work with N1MM Logger. I have PSDR 2.6.4 running along with VSP Manager and N1MM and am following the instructions I found at http://flexradiowiki.abrohamnealsoftware.com/mw/index.php?title=N1MM. I can't believe I've already hit a brick wall on the very first step (well, step 1.2). Step 1.2.1 says to select COM18 in the PSDR CAT Control setup. Can't do it. Next to Port the pull down says None. Clicking on it gets you more of the same; None. VSP Manager says there are no Hardware serial ports, which considering the computer has no serial port connections kinda makes sense. On the other hand it sounds unusual. The computer does have three USB 3.0 ports. The instructions aren't asking me to create COM18. It sounds like it's supposed to be there already, but it isn't. Like I said, dead in the water on step 1. Any help would be greatly appreciated. Thanks in advance. Ken Alexander VE3HLS ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] Setting up Flex-1500/VSPManager/N1MM
Hi folks, I'm getting ready to use my Flex -1500 in a contest for the first time, and that means getting it to work with N1MM Logger. I have PSDR 2.6.4 running along with VSP Manager and N1MM and am following the instructions I found at http://flexradiowiki.abrohamnealsoftware.com/mw/index.php?title=N1MM. I can't believe I've already hit a brick wall on the very first step (well, step 1.2). Step 1.2.1 says to select COM18 in the PSDR CAT Control setup. Can't do it. Next to Port the pull down says None. Clicking on it gets you more of the same; None. VSP Manager says there are no Hardware serial ports, which considering the computer has no serial port connections kinda makes sense. On the other hand it sounds unusual. The computer does have three USB 3.0 ports. The instructions aren't asking me to create COM18. It sounds like it's supposed to be there already, but it isn't. Like I said, dead in the water on step 1. Any help would be greatly appreciated. Thanks in advance. Ken Alexander VE3HLS ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/