RE: [Flightgear-devel] Spitfire - new release
Andy Ross wrote: Sent: 12 August 2004 19:58 To: FlightGear developers discussions Subject: Re: [Flightgear-devel] Spitfire - new release OK, Melchior helped to debug this via chat while I was working on cell phone UI bugs at work. :) It turns out to have been a pair of typos in fuel.nas that were causing all the problems. What I *read* wasn't what the code was actually doing, which explains all the confusion. Yes - thanks. I knew that you would come up with a proper solution. Bit more testing next time, Eh? This one, though, isn't fixed: 3. When a tank is empty, the tank is de-selected by fuel.nas. Thus the position of the fuel cock levers on the Spitfire panel do not necessarily reflect the state of the tank. This is really a metaphor collision. The notion of a tank selected as used by the fuel code and FDM isn't quite the same as that of position of the switch in the cockpit. Yes, quite. I'm still working on the best solution. (the magneto switches have traditionally had the same issue). Philosophically speaking, the property magneto should be a child of engine, while magneto-switch is a control property. Never mind, we don't need to go there, and I've worked up a good solution for the magneto switches in Nasal. It might be a better idea to define a different property to drive the fuel cock animation, and use a Nasal binding to synchronize this with the tank selected property only when it changes (basically: make the fuel cocks output only devices). At the moment this is the case, so when fuel.nas changes the selected state (and I understand why it needs to do this) the fuel cock levers are left behind, and no longer represent the state of selection of the tanks. An alternative is for the fuel cocks to accurately represent the state of selection. However, this would mean that they would move by themselves, which I don't particularly favour right now. I think a more complex solution might be necessary for proper realism. I can't quite see my way through this one yet. Anyway, thanks again for providing a proper solution to these problems Regards, Vivian ___ Flightgear-devel mailing list [EMAIL PROTECTED] http://mail.flightgear.org/mailman/listinfo/flightgear-devel 2f585eeea02e2c79d7b1d8c4963bae2d
RE: [Flightgear-devel] terrasync and terrain/scenery
Erik Hofman asked: Sent: 12 August 2004 18:00 To: FlightGear developers discussions Subject: Re: [Flightgear-devel] terrasync and terrain/scenery Vivian Meazza wrote: Then windsocks and radio towers will magically appear in Europe. Or anyway, they do for me :-). Are you sure about the radio towers? Curtis uses an US only database for that ... You mean those radio masts? :-) Towers, beacons, windsocks - Melchior has it right Regards, Vivian ___ Flightgear-devel mailing list [EMAIL PROTECTED] http://mail.flightgear.org/mailman/listinfo/flightgear-devel 2f585eeea02e2c79d7b1d8c4963bae2d
Re: [Flightgear-devel] ALERT: Losing the DAFIF
I wonder what would happen if some unaware pilot cuts the cable of an actively used cable railway in the Alps because of the lack of information. He he... You mean like the US air force a few years ago? Peter ___ Flightgear-devel mailing list [EMAIL PROTECTED] http://mail.flightgear.org/mailman/listinfo/flightgear-devel 2f585eeea02e2c79d7b1d8c4963bae2d
Re: [Flightgear-devel] ALERT: Losing the DAFIF
Peter L wrote: I wonder what would happen if some unaware pilot cuts the cable of an actively used cable railway in the Alps because of the lack of information. He he... You mean like the US air force a few years ago? Was it the USAF? I couldn't remember anymore, just that it happened.. Erik ___ Flightgear-devel mailing list [EMAIL PROTECTED] http://mail.flightgear.org/mailman/listinfo/flightgear-devel 2f585eeea02e2c79d7b1d8c4963bae2d
Re: [Flightgear-devel] ALERT: Losing the DAFIF
Was it the USAF? I couldn't remember anymore, just that it happened.. Actually, marines. Very unfortunate accident in clear weather in 1998 in Italy. US marine training flight, the plane returned with some damage. The route was a well used one, but it appears they flew lower than normal. Regards Peter ___ Flightgear-devel mailing list [EMAIL PROTECTED] http://mail.flightgear.org/mailman/listinfo/flightgear-devel 2f585eeea02e2c79d7b1d8c4963bae2d
[Flightgear-devel] Re: ALERT: Losing the DAFIF
* Peter L -- Saturday 14 August 2004 05:14: Was it the USAF? I couldn't remember anymore, just that it happened.. Actually, marines. Very unfortunate accident in clear weather in 1998 in Italy. US marine training flight, the plane returned with some damage. The route was a well used one, but it appears they flew lower than normal. That's a bit euphemistic. They flew lower than allowed, against clear orders. And the pilot filmed the whole thing to show off to his friends (IIRC). Despite killing 20(?) people the fines were AFAIK ridiculously low. He would have sat a few years in prison in most legal systems ... m. ___ Flightgear-devel mailing list [EMAIL PROTECTED] http://mail.flightgear.org/mailman/listinfo/flightgear-devel 2f585eeea02e2c79d7b1d8c4963bae2d
Re: [Flightgear-devel] terrasync and terrain/scenery
Erik Hofman wrote: Matevz Jekovec wrote: Does terrasync download terrain only or scenery objects as well. Because the current terrasync repository still has the old structure IMO. (I set the terrasync root dir to fgfs/data/Scenery/Terrain to get it work, but this doesn't include objects download, as they are in fgfs/data/Scenery/Objects, right?). You will only get windsocks and radio towers (in the US only) simply because there are no objects for the rest of the world (yet). Erik Hm..., what about the Eiffel tower, Big Ben, English Parlament, cathedrals, islam churches (sorry, I forgot how they are called :-( )? Weren't they modeled yet? - Matevz ___ Flightgear-devel mailing list [EMAIL PROTECTED] http://mail.flightgear.org/mailman/listinfo/flightgear-devel 2f585eeea02e2c79d7b1d8c4963bae2d
[Flightgear-devel] Re: terrasync and terrain/scenery
* Matevz Jekovec -- Friday 13 August 2004 12:55: Hm..., what about the Eiffel tower, Big Ben, English Parlament, cathedrals, islam churches (sorry, I forgot how they are called :-( )? mosque Weren't they modeled yet? It seems like we aren't enough developers for these. There are a few privately done objects: Jon(?) has done a lot of aircraft buildings and some landmarks for GB, Fred for France/Paris (arc de triomphe, tour eiffel(?)), I have done a few airport buildings for LOWL and the Danube tower of Vienna). But there's no central repository for all of these yet. m. ___ Flightgear-devel mailing list [EMAIL PROTECTED] http://mail.flightgear.org/mailman/listinfo/flightgear-devel 2f585eeea02e2c79d7b1d8c4963bae2d
Re: [Flightgear-devel] terrasync and terrain/scenery
Matevz Jekovec wrote: Erik Hofman wrote: Hm..., what about the Eiffel tower, Big Ben, English Parlament, cathedrals, islam churches (sorry, I forgot how they are called :-( )? Weren't they modeled yet? There is a generic observatory model, but no database to place them correctly. The rest of those models is not (yet) modeled, and added to the scenery (at least not that I know of). Erik ___ Flightgear-devel mailing list [EMAIL PROTECTED] http://mail.flightgear.org/mailman/listinfo/flightgear-devel 2f585eeea02e2c79d7b1d8c4963bae2d
[Flightgear-devel] Beacons
Melchior FRANZ wrote: He probably means the beacons. These are everywhere, along with the towers socks. Has anyone ever seen beacons on a tall tower like that in real life? Normally, I think, it's just on the roof of the control tower or another airport building, and since people have to see it only from the air, it does not have to be high up. Those big towers beside the runway look very strange and un-airport-like. All the best, David ___ Flightgear-devel mailing list [EMAIL PROTECTED] http://mail.flightgear.org/mailman/listinfo/flightgear-devel 2f585eeea02e2c79d7b1d8c4963bae2d
Re: [Flightgear-devel] Re: ALERT: Losing the DAFIF
That's a bit euphemistic. They flew lower than allowed, against clear orders. And the pilot filmed the whole thing to show off to his friends (IIRC). Despite killing 20(?) people the fines were AFAIK ridiculously low. He would have sat a few years in prison in most legal systems ... Yeah, I was a bit more polite than normal. Just put it down to not knowing you guys yet... Peter ___ Flightgear-devel mailing list [EMAIL PROTECTED] http://mail.flightgear.org/mailman/listinfo/flightgear-devel 2f585eeea02e2c79d7b1d8c4963bae2d
Re: [Flightgear-devel] ALERT: Losing the DAFIF
Jim Wilson wrote: Ah...oh. H. What is the AIP? I hadn't read government into that first posting at all, but maybe there was a typo. If it is the RAAF or Aussie government in some form, this could be a serious problem for information on the web, that goes a bit beyond this one data set. Uggh...greed. The AIP is the Aeronautical Information Publication, the collection of aviation information published by each country (except the U.S.). I don't know much about ICAO stuff, but as far as I understand, the AIP is (conceptually) both the handbook of regulations, similar to the AIM in the U.S., and all the charts, approach plates, etc. In Canada, Transport Canada (a government ministry) publishes the actual AIP handbook, while Nav Canada (a private company) publishes charts and plates. From reading the followup story, it looks like in Australia either a private company or a crown corporation controls the whole AIP and they're fishing for new revenue sources. All the best, David ___ Flightgear-devel mailing list [EMAIL PROTECTED] http://mail.flightgear.org/mailman/listinfo/flightgear-devel 2f585eeea02e2c79d7b1d8c4963bae2d
[Flightgear-devel] Re: ALERT: Losing the DAFIF
* Peter L -- Saturday 14 August 2004 07:31: That's a bit euphemistic. Yeah, I was a bit more polite than normal. Just put it down to not knowing you guys yet... No problem. And I didn't want to make it sound as if you pardoned a criminal. :-) I just wanted to make clear that this was *not* some unaware pilot who cuts the cable. He knew the cable was there. He wanted to fly under it and make a nice film, which was common practice in this unit at Aviano/Italy. Even their commander did it (and lost his command because of that). The cable was around 85 to 95 m AGL (~300 ft), and the minimum altitude allowed in this area was 150 m (~500 ft) at this time. This was afterwards raised to 600 m (~2000 ft). m. Ref.: http://www.cnn.com/WORLD/9803/10/italian.crash.report/ ___ Flightgear-devel mailing list [EMAIL PROTECTED] http://mail.flightgear.org/mailman/listinfo/flightgear-devel 2f585eeea02e2c79d7b1d8c4963bae2d
Re: [Flightgear-devel] ALERT: Losing the DAFIF
In Oz, the AIP is available from www.Airservicesaustralia.com (a gov. body). They sell the info, but you can also get the PDF's online under online documents. To get electronic data, you have to buy it. The ERSA suppliments are also there. ERSA it managed by the RAAF/Airservices. Peter - Original Message - From: David Megginson [EMAIL PROTECTED] To: FlightGear developers discussions [EMAIL PROTECTED] Sent: Friday, August 13, 2004 5:27 AM Subject: Re: [Flightgear-devel] ALERT: Losing the DAFIF Jim Wilson wrote: Ah...oh. H. What is the AIP? I hadn't read government into that first posting at all, but maybe there was a typo. If it is the RAAF or Aussie government in some form, this could be a serious problem for information on the web, that goes a bit beyond this one data set. Uggh...greed. The AIP is the Aeronautical Information Publication, the collection of aviation information published by each country (except the U.S.). I don't know much about ICAO stuff, but as far as I understand, the AIP is (conceptually) both the handbook of regulations, similar to the AIM in the U.S., and all the charts, approach plates, etc. In Canada, Transport Canada (a government ministry) publishes the actual AIP handbook, while Nav Canada (a private company) publishes charts and plates. From reading the followup story, it looks like in Australia either a private company or a crown corporation controls the whole AIP and they're fishing for new revenue sources. All the best, David ___ Flightgear-devel mailing list [EMAIL PROTECTED] http://mail.flightgear.org/mailman/listinfo/flightgear-devel 2f585eeea02e2c79d7b1d8c4963bae2d ___ Flightgear-devel mailing list [EMAIL PROTECTED] http://mail.flightgear.org/mailman/listinfo/flightgear-devel 2f585eeea02e2c79d7b1d8c4963bae2d
[Flightgear-devel] New JSBSim Newsletter
Greetings: The July (!) issue of Back of the Envelope is up and linked from the main page of the JSBSim web site, www.jsbsim.org. In this issue, Erik shares his experiences in creating the flight model for the F-16. There is also an article about data output from JSBSim, and an in depth review of modeling aerodynamics in JSBSim. Jon ___ Flightgear-devel mailing list [EMAIL PROTECTED] http://mail.flightgear.org/mailman/listinfo/flightgear-devel 2f585eeea02e2c79d7b1d8c4963bae2d
Re: [Flightgear-devel] terrasync and terrain/scenery
Matevz Jekovec wrote: Hm..., what about the Eiffel tower, Big Ben, English Parlament, cathedrals, islam churches (sorry, I forgot how they are called :-( )? Weren't they modeled yet? I have chimneys and cooling towers for a lot of the big UK power stations - quite handy for navigation. The houses of parliament would be handy, but I don't have enough info, and I suspect anyone wanting dimensions would be questioned by several interested parties :-) You can't see big ben But with the OpenAL code you could probably hear it if you flew past at the right time ;-) -- Jon Stockill [EMAIL PROTECTED] ___ Flightgear-devel mailing list [EMAIL PROTECTED] http://mail.flightgear.org/mailman/listinfo/flightgear-devel 2f585eeea02e2c79d7b1d8c4963bae2d
Re: [Flightgear-devel] Re: ALERT: Losing the DAFIF
Melchior FRANZ said: * Peter L -- Saturday 14 August 2004 05:14: Was it the USAF? I couldn't remember anymore, just that it happened.. Actually, marines. Very unfortunate accident in clear weather in 1998 in Italy. US marine training flight, the plane returned with some damage. The route was a well used one, but it appears they flew lower than normal. That's a bit euphemistic. They flew lower than allowed, against clear orders. And the pilot filmed the whole thing to show off to his friends (IIRC). Despite killing 20(?) people the fines were AFAIK ridiculously low. He would have sat a few years in prison in most legal systems ... There were no fines. The official line: http://www.dod.gov/news/Feb1998/n02101998_9802105.html The media: http://www.pbs.org/newshour/bb/military/jan-june99/marines_2-3.html http://www.cnn.com/US/9902/26/marines.cable.car.02/ The result: http://www.cnn.com/US/9903/04/marines.cablecar.03/ Back to Erik's original comment: note that if the information regarding the charting of the cable was _key_ to the defense in this case. Best, Jim ___ Flightgear-devel mailing list [EMAIL PROTECTED] http://mail.flightgear.org/mailman/listinfo/flightgear-devel 2f585eeea02e2c79d7b1d8c4963bae2d
Re: [Flightgear-devel] Re: ALERT: Losing the DAFIF
Melchior FRANZ said: * Peter L -- Saturday 14 August 2004 07:31: That's a bit euphemistic. Yeah, I was a bit more polite than normal. Just put it down to not knowing you guys yet... No problem. And I didn't want to make it sound as if you pardoned a criminal. :-) I just wanted to make clear that this was *not* some unaware pilot who cuts the cable. He knew the cable was there. He wanted to fly under it and make a nice film, which was common practice in this unit at Aviano/Italy. Even their commander did it (and lost his command because of that). The cable was around 85 to 95 m AGL (~300 ft), and the minimum altitude allowed in this area was 150 m (~500 ft) at this time. This was afterwards raised to 600 m (~2000 ft). m. Ref.: http://www.cnn.com/WORLD/9803/10/italian.crash.report/ The U.S. Marine motto is The few, the proud, not the most intelligent :-) I think the few is important. Unfortunately, it's hard to train folks to be potential killers, and expect civility and common sense to always prevail. We've got a training field nearby and this is a fairly rural area. I can say that I haven't seen anything marginal come from there. The private jets are another story. I'm amazed at the crap they get away with over the Maine woods. And then of course there are the cruise missle tests... Best, Jim ___ Flightgear-devel mailing list [EMAIL PROTECTED] http://mail.flightgear.org/mailman/listinfo/flightgear-devel 2f585eeea02e2c79d7b1d8c4963bae2d
Re: [Flightgear-devel] New JSBSim Newsletter
Jon Berndt said: Greetings: The July (!) issue of Back of the Envelope is up and linked from the main page of the JSBSim web site, www.jsbsim.org. In this issue, Erik shares his experiences in creating the flight model for the F-16. There is also an article about data output from JSBSim, and an in depth review of modeling aerodynamics in JSBSim. Very cool! Already downloaded and printed. Thanks, Jim ___ Flightgear-devel mailing list [EMAIL PROTECTED] http://mail.flightgear.org/mailman/listinfo/flightgear-devel 2f585eeea02e2c79d7b1d8c4963bae2d
Re: [Flightgear-devel] Re: terrasync and terrain/scenery
On Fri, 13 Aug 2004 13:15:55 +0200, Melchior wrote in message [EMAIL PROTECTED]: * Matevz Jekovec -- Friday 13 August 2004 12:55: Hm..., what about the Eiffel tower, Big Ben, English Parlament, cathedrals, islam churches (sorry, I forgot how they are called :-( )? mosque ..close: http://i-cias.com/e.o/minaret.htm ;-) Weren't they modeled yet? It seems like we aren't enough developers for these. There are a few privately done objects: Jon(?) has done a lot of aircraft buildings and some landmarks for GB, Fred for France/Paris (arc de triomphe, tour eiffel(?)), I have done a few airport buildings for LOWL and the Danube tower of Vienna). But there's no central repository for all of these yet. m. -- ..med vennlig hilsen = with Kind Regards from Arnt... ;-) ...with a number of polar bear hunters in his ancestry... Scenarios always come in sets of three: best case, worst case, and just in case. ___ Flightgear-devel mailing list [EMAIL PROTECTED] http://mail.flightgear.org/mailman/listinfo/flightgear-devel 2f585eeea02e2c79d7b1d8c4963bae2d
Re: [Flightgear-devel] Two scenery design issues.
Erik Hofman wrote: Vivian Meazza wrote: AC3D seems to add the material colour to the texture No, it's OpenGL that does this. With everything related to modeling you have to take into account the possibilities and requirements of OpenGL, and not that of your 3d modeler program. To be exact, it is PLIB that sets the texture environment to GL_MODULATE. It has the effect of ***multiplying*** the material color with the texture colors. So, if you set a black color (0,0,0), it would stay black because 0 * X = 0. If you want your texture unmodified by the material color, set it to white (1,1,1). The only way to have a emissive effect on an object is to set an emissive material color ( for example white ) and modulate it with the texture : black in the texture - black on object, yellow in the texture - emissive yellow on the object. -Fred ___ Flightgear-devel mailing list [EMAIL PROTECTED] http://mail.flightgear.org/mailman/listinfo/flightgear-devel 2f585eeea02e2c79d7b1d8c4963bae2d