Re: NATd question
There some marketing scams out there that some ISP use to get you to pay just a bit more for service. One common scam is as follows: consumer: "I have two computers. I need to make sure they can both get on the internet." (Thinking: "I know my buddy did this with his setup") ISP: "Oh you mean you need a second IP address, right?" (Thinking: "The poor guy doesn't know he can do it with one and NAT server. But I ain't telling him that.") consumer: "Will that let me get both of these connected?" ISP: "Oh you bet. It will only be $5($10/$15/maybe even $20) more dollars a month" consumer: "Ok set it up. Lets do that. I really need to get these two on the internet." ;) Matt - Original Message - From: "Vulpes Velox" <[EMAIL PROTECTED]> To: "Marwan Sultan" <[EMAIL PROTECTED]> Cc: "FreeBSD questions List" <[EMAIL PROTECTED]> Sent: Sunday, December 07, 2003 8:50 PM Subject: Re: NATd question > On Sun, 7 Dec 2003 19:56:14 +0300 > "Marwan Sultan" <[EMAIL PROTECTED]> wrote: > > > Hello Everybody, > > > > > >Im on FreeBSD 4.8-R fresh installation. > >and this is the configuration i will use on my LAN > > > >Internet ->connected-> DSL Router -> FreeBSD box -> HUB -> LAN > > > >DSL Router has an IP 192.168.0.1 and the real IP too. > > > >FreeBSD box has 2 NIC's > >My question is: > > > >Where and How to sign 2 IPs for 2 NICs? > > > >which IP the NIC connected to DSL should sign? > >Which IP the NIC connected to HUB should sign? > >Which of these IPs will be as gateway IP the clients will sign? > > The DSL connection is probally going to be DHCP so just set the nic connected to > it for DHCP. Then for the lan select what ever private address you want. > > You will have to experiment a bit to figure out which is which. > > >I have read the instructions of freebsd.org, > >and it says the gateway will be the BSD machine 192.168.0.1 > >BUT this IP in my LAN is signed to the router automatilcaly. > > You can assign the gateway machine any private address you want. BTW if you have > a gateway why are you setting up a second? > > >Can someone explain? advise? This machine will be only for this use. > > It basically works like this... > LAN -> gateway -> natd -> dsl uplink device -> WAN > > Any thing on to a address not included in the subnet mask is going to leave > throught the gateway. The usual subnet mask is 255.255.255.0 so thus there are > 256 possabilities of address in the alloted space. Now lets say out gateway is > 192.168.0.1 any thing not belonging to 192.168.0.1/24 is going to leave thought > the gateway. On it's way out that packet is going to be monkeyed, by natd, with > so it will know where to send the returned info. This is done so that it will > know which machine on the LAN it should be sent too. > ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: NATd question
On Dec 7, 2003, at 11:15 PM, Matt Edwards wrote: consumer: "I have two computers. I need to make sure they can both get on the internet." (Thinking: "I know my buddy did this with his setup") ISP: "Oh you mean you need a second IP address, right?" (Thinking: "The poor guy doesn't know he can do it with one and NAT server. But I ain't telling him that.") Of course, not long ago, you would have had the 1st tier tech support drone accuse you of stealing bandwidth if you mentioned that you had more than one machine networked. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
XtRadius
Could anybody gimme a link to any XtRadius HOW-TO or something please. Thank you. -- Best regards, flux mailto:[EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: lame converts music-CD/wav-file to mp3? how?
On Mon, Dec 08, 2003 at 03:22:27PM +0900, Rob wrote: > > Hi, > > What's a not too complicated way of converting music CD's to mp3 files? > > So far I failed using lame: I could create wav files and play them with > x11amp. Check out the description for lame in ports, "mbueide@/usr/ports/audio/lame % cat pkg-descr LAME stands for LAME Ain't an Mp3 Encoder." Maybe this is the problem:). Personally, I like to use bladeenc in a shell. I can have several open at one time encoding several of my cd's, albums, tapes all at once. Nice quality too. You will find bladeenc in /usr/ports/audio also. As for ripping, I use cdda2wav. It's a little more complicated but not to bad once you get used to it. ... mike ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
i having some ploblem about ATA resetting? please help me?
Hi, I purchased a Computer Server and plan to install freebsd 4.9 os. but I have some ploblem with booting messages such as: --- ad0: READ command timeout tag=0 serv=0 - resetting ata0: resetting devices .. ata0-slave: ATA identify retries exceeded done ad0: READ command timeout tag=0 serv=0 - resetting ata0: resetting devices .. ata0-slave: ATA identify retries exceeded done ad0: READ command timeout tag=0 serv=0 - resetting ata0: resetting devices .. ata0-slave: ATA identify retries exceeded done ad0: READ command timeout tag=0 serv=0 - resetting ad0: timeout waiting for cmd=ef s=d0 e=00 ad0: trying fallback to PIO mode ata0: resetting devices .. ata0-slave: ATA identify retries exceeded done ad0: READ command timeout tag=0 serv=0 - resetting ata0: resetting devices .. ata0-slave: ATA identify retries exceeded done ad0: READ command timeout tag=0 serv=0 - resetting ata0: resetting devices .. ata0-slave: ATA identify retries exceeded done ad0: READ command timeout tag=0 serv=0 - resetting ata0: resetting devices .. done ad0: READ command timeout tag=0 serv=0 - resetting ata0: resetting devices .. ata0-slave: ATA identify retries exceeded done - Please help me too. Thank you very much. C.Kitisak ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: running freebsd with sendmail and qpopper
On Sun, Dec 07, 2003 at 07:07:59PM -0500, Marty Landman typed: > I've given this another try and got much further albeit w/o visible > success. Here are my notes interleaved in your instructions. > > At 09:53 PM 12/3/2003, Steve Bertrand wrote: > > >assume the following: > > > >- your domain name is example.com > > Newbie that I am not certain that my understanding of this is correct. My > /etc/rc.conf file has > > hostname="SwamiSalami.face2interface.domain" > > so this is my fqdn, right? And my domain name is face2interface.domain? > That's the way I set up things. And there's your problem. "face2interface.domain" does not resolve in DNS, so most if not all other mail servers on the internet will refuse to accept email from it. You can either set your hostname to something that does resolve, or configure sendmail to masquerade as something that resolves. You can read more about configuring sendmail in the file /usr/share/sendmail/cf/README Ruben > >- the IP of your mail server is 192.168.0.10 > > The ip adr of my fbsd box, i.e. the one being configured to act as the mail > server for my lan is 192.168.0.7. > > >- your default gateway for your network is 192.168.0.1 > > Yes, I think. That's the ip adr for my workstation, the box that has the > dial up connection w/ windows ics enabled. > > >- your ip of your client computer is 192.168.0.25 > > I'm going to use my workstation as the client computer, i.e. to do testing. > > >- your mail server name is mail.example.com > > If my other assumptions are right then this is mail.face2interface.domain - > but maybe there is something more to this and I'm ignorant??? > > >- your client computer name is client.example.com > > delliver.mshome.net > > >- your mail server will back as a qpopper and DNS server for the network > > Meaning my lan, the local network right? > > >10> Configure your client machine to check email > >[snip] > >11> Check && send email > > Steve, I get a "Diagnostic-Code: SMTP; 550 Host unknown" when trying to > send an email from the server to the client, i.e. from > SwamiSalami.face2interface.domain to [EMAIL PROTECTED] and an error > on delliver 'Resolving address for "mail.face2interface.domain"' when > trying to send an email from the client to the server (It goes through the > server either way so the server is a client in this test, right?). Although > I can ping both boxes from delliver (the client) I can't ping swamisalami > from itself, can ping delliver from swamisalami. > > On the bright side, everything that worked before still works afaik. So how > do I start debugging from here? > > BTW, the only issue I had with the instructions were where one of the kill > -HUP `cat` cmds didn't work as is because the cat pid output wasn't > right w/o somehow parsing first. > > >If you receive email for this user into the account, then thank god > > And here I'd thought that email was technology rather than religion. > > > Marty Landman Face 2 Interface Inc 845-679-9387 > Sign On Required: Web membership software for your site > Make a Website: http://face2interface.com/Home/Demo.shtml > > ___ > [EMAIL PROTECTED] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: i having some ploblem about ATA resetting? please help me?
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi, On Monday 08 December 2003 08:50, Kitisak wrote: > ad0: READ command timeout tag=0 serv=0 - resetting > ata0: resetting devices .. ata0-slave: ATA identify retries exceeded > done I had this problem when I had the IDE cable on a hard disk connected the wrong way around (on a self-built machine). Possibly not a good sign if it's a new machine - -- Cheers, Chris Howells -- [EMAIL PROTECTED], [EMAIL PROTECTED] Web: http://chrishowells.co.uk, PGP ID: 0x33795A2C KDE/Qt/C++/PHP Developer: http://www.kde.org -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.3 (FreeBSD) iD8DBQE/1ElPF8Iu1zN5WiwRAld3AJ9+m4FYdX1/67yCQGi35b6hBZ5H8QCgkXJu jeMizxcW5fD7sZnjMKoxd/A= =4CMa -END PGP SIGNATURE- ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: lame converts music-CD/wav-file to mp3? how?
mike bueide wrote: On Mon, Dec 08, 2003 at 03:22:27PM +0900, Rob wrote: Hi, What's a not too complicated way of converting music CD's to mp3 files? So far I failed using lame: I could create wav files and play them with x11amp. Check out the description for lame in ports, "mbueide@/usr/ports/audio/lame % cat pkg-descr LAME stands for LAME Ain't an Mp3 Encoder." Maybe this is the problem:). Personally, I like to use bladeenc in a shell. I can have several open at one time encoding several of my cd's, albums, tapes all at once. Nice quality too. You will find bladeenc in /usr/ports/audio also. As for ripping, I use cdda2wav. It's a little more complicated but not to bad once you get used to it. ... mike Well, that's the funny answer ... I thought of it, too. But the real joke is that LAME *is* an mp3 encoder; it wasn't when it started, but now it is...AAMOF, recommended in the handbook. And all the tools have CLI interfaces ... ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: ls and color
On Sun, Dec 07, 2003 at 11:38:07AM -0700, Robin Schoonover wrote: > However, ls does have to lookup how to display the color. The 'xterm' > terminal name in 4.x does not have color, so you have to tell xterm use > 'xterm-color', which does have it. This amounts to doing something > like "xterm -tn xterm-color". (I've been using 5.1 lately, so if this was > MFC'd recently I wouldn't really know) The xterm terminal type is now identical to xterm-color and has been since April, including on the RELENG_4 branch. If you're running 4.8-STABLE or one of the releases from before that date, you can use this setting in your .Xdefaults to change the terminal type to xterm-color by default: xterm*termName: xterm-color but you should make sure that you run something like: [ -f ${HOME}/.Xdefaults ] && /usr/X11R6/bin/xrdb -merge ${HOME}/.Xdefaults in your ~/.xsession or ~/.xinitrc Cheers, Matthew -- Dr Matthew J Seaman MA, D.Phil. 26 The Paddocks Savill Way PGP: http://www.infracaninophile.co.uk/pgpkey Marlow Tel: +44 1628 476614 Bucks., SL7 1TH UK pgp0.pgp Description: PGP signature
Re: Realtek 8139 unstable?
horio shoichi wrote: On Fri, 05 Dec 2003 13:01:15 +0300 den <[EMAIL PROTECTED]> wrote: Greg 'groggy' Lehey wrote: On Friday, 5 December 2003 at 8:51:30 +0200, Chris Visser wrote: Hi, I'm running FreeBSD 5.1, on a box with a Digi Sync 570 card and a Realtek 8139 network card. The Machine runs fine, most of the time, but every now and again my network card stops working for no reason. Rebooting the box fixes this for a while, but the it starts again. There have been reports of instabilities with the 8139. I don't know if it's really the hardware to blame or the driver, but the documentation for the hardware is apparently so terrible that it's difficult to say. I'm using an 8139 in a number of places, including (currently) my main server machine. The switch notes a large number of errors under load, and I'm thinking of changing to a different card the next time I have to reboot. Rather than reboot your machine, you'll probably find that the following sequence unwedges the card: ifconfig rl0 down ifconfig rl0 up I had this in a cron job at one point. Greg -- When replying to this message, please copy the original recipients. If you don't, I may ignore the reply or reply to the original recipients. For more information, see http://www.lemis.com/questions.html See complete headers for address and phone numbers. I have had the problem with this card on FreeBSD 5.0. Problem was resolved by recompiling of kernel with new drivers from Realtec. It seems there is many modification of 8139 chipset that have a postfix ( "D", "C",...). When I choose driver that match my chipset all become ok. I don't know whether this driver was included in 5.1, so this is only assumption, and it doesn't help to you. -- Denis. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]" I found ftp://152.104.125.40/cn/nic/rtl8139abcd8130810xseries/freebsd-8139(110).zip via www.realtek.com.tw, which is for FreeBSD. However, it is for 4.5. Could you give me (us) your reference to 5.0 (or 5.x) ? horio shoichi Unfortunately, I don't remember where I found the diver. Are you sure that dirver from link you pointed isn't serve for 5.0 ? I have had the problems with this card approximately in the same time as changing system from 4.x to 5.0 . Possibly , I fixed the problem in 4.x - not in 5.0 - I don't remeber precisely. But now I have this card working under 5.0 and there is no problem. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Getty in jail causes 60+ core dumps/sec
I have a jail installed on a virtual disk, with it's own IP on 4.9 stable. With the jail running it causes 60 or so signal 11 core dumps per second. However, this doesn't seem to happen all the time; it comes and goes. Here's the exact message: Dec 8 05:00:00 charlie /kernel: pid 51738 (getty), uid 0: exited on signal 11 (core dumped) I updating my system (and the jail) to the latest stable, but the problem remains. Could this be a memory (hardware) problem? Or is it something else entirely. thanks, Jay __ Do you Yahoo!? Protect your identity with Yahoo! Mail AddressGuard http://antispam.yahoo.com/whatsnewfree ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Getty in jail causes 60+ core dumps/sec
I just noticed that this is caused by some scripts from the-labs.com that I was using. The error doesn't occur when I start a jail with the regular jail command, so I'll just use that. Jay __ Do you Yahoo!? Protect your identity with Yahoo! Mail AddressGuard http://antispam.yahoo.com/whatsnewfree ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Deinstalling questions....
On Sun, Dec 07, 2003 at 06:04:28PM -0500, Xpression wrote: > Is there a way to uninstall a package installed via make && > make install ??? I mean, when I compile a package it is > installed on /usr/local and through a tree, then if I want > to uninstall it I have to delete the files one per one... You mean something you've installed outside the ports/pkg system? I'm afraid the answer is that the only thing you can do is labouriously identify each individual file and manually delete them. There's a couple of tricks you can use to make the job easier -- if you can positively identify some of the files you can extract the timestamp and then hunt for files with a similar timestamp. If you've still got the sources around, you can try installing using a different prefix pointing at an empty directory -- eg. /tmp/something -- supposing that the compile system permits that (all autoconf based source packages do). Then compare what gets installed in there with what's in your /usr/local ports are your friend... trust the ports... Cheers, Matthew -- Dr Matthew J Seaman MA, D.Phil. 26 The Paddocks Savill Way PGP: http://www.infracaninophile.co.uk/pgpkey Marlow Tel: +44 1628 476614 Bucks., SL7 1TH UK pgp0.pgp Description: PGP signature
Re: x11/kde3 and libglut error
On Sat, 6 Dec 2003, Ryan Moe wrote: > [EMAIL PROTECTED] wrote: > > >Hello. I'm using FreeBSD 4.8-RELEASe p14. I'm trying to install kde3 on my > >system and get this error > > > >/usr/libexec/elf/ld: cannot find -lGL > >*** Error code 1 > I believe the problem lies with XFree86-4-libraries. I had the same > problem and portupgrade -f XFree86-4-libraries followed by portupgrade > -f libglut fixed it for me.. Are either of you using the nvidia-driver port? If so, it puts GL libs in place which break this build. Fortunately, it keeps the old libraries nearby, so rather than a full rebuild of the XFree86-4-libraries, you can pkg_deinstall nvidia-driver, do the build, then reinstall nvidia-driver. Much quicker. Incidentally pkgtools.conf can be taught to do this for you. -- jan grant, ILRT, University of Bristol. http://www.ilrt.bris.ac.uk/ Tel +44(0)117 9287088 Fax +44 (0)117 9287112 http://ioctl.org/jan/ "No generalised law is without exception." A self-demonstrating axiom. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Dual-boot does not work with GRUB
I've been trying to setup a dual boot Linux/FreeBSD system so I can tryout freebsd and compare it to linux, my current main os. I had the freebsd easyboot bootloader installed, but I couldn't get it to boot linux so I reinstalled GRUB as lilo doesn't even load properly on my system. I can now boot into linux and use the freebsd install disk to boot into freebsd. I've tried to get grub to boot freebsd directly, but it's not working. I've had it chainloader the first sector of the slice with freebsd on it and chainload /boot/boot1 directly, both just print a - in the upper left corner and stop, like it loaded boot1 successfully but boot1 couldn't find boot2. Chainloading /boot/boot0 does a similar result, with that boot loader. Using grub to try and load /boot/loader and /kernel with the kernel command doesn't do much either. Any suggestions. Also, in my short experience with freebsd, it seems relatively fast, but when there is massive i/o in the background, like untarring a massive tarball, the system becomes rather unresponsive with certain things, is something misconfigured on my system? Harddrive dma is turned on according to sysctl. On linux there is also an option to unmask irqs while handling a disk interrupt, is there a similar option in freebsd and will it help? -- I sense much NT in you. NT leads to Bluescreen. Bluescreen leads to downtime. Downtime leads to suffering. NT is the path to the darkside. Powerful Unix is. Public Key: ftp://ftp.tallye.com/pub/lorenl_pubkey.asc Fingerprint: B3B9 D669 69C9 09EC 1BCD 835A FAF3 7A46 E4A3 280C pgp0.pgp Description: PGP signature
RE: Why would drive run at UDMA33? (Segate 80GB)
ATA channel 0: Master: ad0 ATA/ATAPI rev 5 Slave: acd0 ATA/ATAPI rev 0 ATA channel 1: Master: ad2 ATA/ATAPI rev 6 Slave: no device present Here is your problem. On channel 0 You have an UDMA100 disk and an UDMA33 cd-rw. The motherboard IDE controller steps down the speed to the speed of the slowest device. You have to move the cd-rw device to the channel 1. The motherboard will have printed next to the IDE sockets, primary IDE and secondary IDE, which are channel 0 and channel 1. Both HD's and the cd/rw have jumpers next to where the ribbon connects. The jumpers have 3 positions, master, slave, and cable select. If you look closely on the green board you will see MA, SL, and CS to help you identify what jumper is located where. If all three devices are jumpered with CS, then just swap the cd-rw with the other HD. If your channel 0 HD is jumpered as master and the cd/rw is jumpered as slave, them you have to change the cd-rw jumper to master and swap it with the channel 1 HD, then jumper the new HD to slave and plug it in where the cd-rw was on the channel 0 ribbon. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of JacobRhoden Sent: Monday, December 08, 2003 1:07 AM To: Jarrod; [EMAIL PROTECTED] Subject: Re: Why would drive run at UDMA33? (Segate 80GB) > JacobRhoden <[EMAIL PROTECTED]> wrote: > > I have just purchased a new 80GB drive, howerver i noticed it is running > > significantly slower than my current 80gb drive. On Mon, 8 Dec 2003 04:38 pm, Jarrod wrote: > Try 'man atacontrol' I typed 'man atacontrol' and it didnt seem to help! (grin). Seriously, i had a look and worked out how to list/display the modes of drives, and i am not sure what commands i would type to help fix the speed? I can now show people this though: ATA channel 0: Master: ad0 ATA/ATAPI rev 5 Slave: acd0 ATA/ATAPI rev 0 ATA channel 1: Master: ad2 ATA/ATAPI rev 6 Slave: no device present (The cable is the right way around, and the drive is the only drive on the cable, thanks for suggestions though). Jacob RhodenPhone: +61 3 8344 4478 ITS DivisionEmail: [EMAIL PROTECTED] Melbourne University Mobile: +61 403 788 386 ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]" ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Why would drive run at UDMA33? (Segate 80GB)
Are you sure that both IDE controllers on the motherboard are ATA 100 or better? I've seen several motherboards where the primary (first) ATA controller is ATA 100 and the second was ATA 33. The second one was intended for CD-ROM drives and the first for hard drives. By plugging into the first controller, you could rule this out as others have suggested. Some maxtor drives require a jumper for ATA 100. I'm not sure about all seagates. I just put in an 80 gig seagate and it steped down to ATA 66 correctly in my iMac which shipped with a 10 gig. Lucas Holt [EMAIL PROTECTED] FoolishGames.com (Jewel Fan Site) JustJournal.com (Free blogging) "Only two things are infinite, the universe and human stupidity, and I'm not sure about the former." - Albert Einstein (1879-1955) ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: lame converts music-CD/wav-file to mp3? how?
> What's a not too complicated way of converting music CD's to mp3 files? I prefer this port: audio/ripit. It handles everything for you: ripping, cddb lookup, conversion to mp3, ... > So far I failed using lame: I could create wav files and play them with > x11amp. Perhaps x11amp is not able to play mp3 with variable bitrate. You could try mpg123 or xmms instead. Simon signature.asc Description: Digital signature
RE: Dual-boot does not work with GRUB
Hi, I to have a multi boot system with linux and freebsd and windows. GRUB is my boot loader. I did not chain load FreeBSD. This is my menu file for GRUB default=1 timeout=10 splashimage=(hd0,4)/grub/splash.xpm.gz title Red Hat Linux 9 (2.4.20-8) root (hd0,4) kernel /vmlinuz-2.4.20-8 ro root=LABEL=/ initrd /initrd-2.4.20-8.img title Windows 2000 rootnoverify (hd0,0) chainloader +1 title FreeBSD 4.8 root (hd0,3,a) kernel /boot/loader And my fdisk -l Device BootStart EndBlocks Id System /dev/hda1 1 892 7164958+ 7 HPFS/NTFS /dev/hda2 893 956514080b Win95 FAT32 /dev/hda3 957 2522 125788955 Extended /dev/hda4 * 2523 4865 18820147+ a5 FreeBSD /dev/hda5 957 969104391 83 Linux /dev/hda6 970 2457 11952328+ 83 Linux /dev/hda7 2458 2522522081 82 Linux swap This works fine for me. I to am a beginner and still gathering info Hope it helps -sundeep -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Loren M. Lang Sent: Monday, December 08, 2003 7:26 AM To: [EMAIL PROTECTED] Subject: Dual-boot does not work with GRUB I've been trying to setup a dual boot Linux/FreeBSD system so I can tryout freebsd and compare it to linux, my current main os. I had the freebsd easyboot bootloader installed, but I couldn't get it to boot linux so I reinstalled GRUB as lilo doesn't even load properly on my system. I can now boot into linux and use the freebsd install disk to boot into freebsd. I've tried to get grub to boot freebsd directly, but it's not working. I've had it chainloader the first sector of the slice with freebsd on it and chainload /boot/boot1 directly, both just print a - in the upper left corner and stop, like it loaded boot1 successfully but boot1 couldn't find boot2. Chainloading /boot/boot0 does a similar result, with that boot loader. Using grub to try and load /boot/loader and /kernel with the kernel command doesn't do much either. Any suggestions. Also, in my short experience with freebsd, it seems relatively fast, but when there is massive i/o in the background, like untarring a massive tarball, the system becomes rather unresponsive with certain things, is something misconfigured on my system? Harddrive dma is turned on according to sysctl. On linux there is also an option to unmask irqs while handling a disk interrupt, is there a similar option in freebsd and will it help? -- I sense much NT in you. NT leads to Bluescreen. Bluescreen leads to downtime. Downtime leads to suffering. NT is the path to the darkside. Powerful Unix is. Public Key: ftp://ftp.tallye.com/pub/lorenl_pubkey.asc Fingerprint: B3B9 D669 69C9 09EC 1BCD 835A FAF3 7A46 E4A3 280C Confidentiality Notice The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain confidential or privileged information. If you are not the intended recipient, please notify the sender at Wipro or [EMAIL PROTECTED] immediately and destroy all copies of this message and any attachments. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Will it work Free BSD 5.1 for IBM X335 Server??
Hi, I would like to know that Free BSD 5.1 chould be work on IBM X335 Server. Plaese let me know ASAP!! ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: apcupsd
OS: 5.1-RELEASE UPS: Back-UPS 650, serial interface Cable: 940-0020B With the above setup apcupsd detects a power failure, but not a return of power, and thus does not send a notification email. Also, apcupsd does not halt the system. I noticed in the docs that for this to work on FreeBSD you need a Smart UPS, and use the --kill-on-powerfail option at the command line. Since I do not have a Smart UPS, I have not tried this option. My question is what model number of APC UPS is working well for you with apcupsd 3.10.6 My current setup did work fine with Red Hat 9.0 and upcupsd 3.8.0, so I do not think this is an issue with the cable. Thanks, Barry On Mon, 2003-12-08 at 01:22, Robert Huff wrote: > Hello: > > > Are there any users of apcupsd on the list? If so, please > > respond to me privately. I have a question about recommended > > UPS's that work well with FreeBSD. > > There are. :-) > QHat's the question? > > > Robert Huff > > ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: SUNRays
Andrew Boothman <[EMAIL PROTECTED]> writes: > They are *really* thin clients that really only consist of a > monitor, mouse and keyboard and rely on their host server for > everything else. That's not an architecture that you're going to get > FreeBSD to run under I wouldn't think. I'm quite happily running FreeBSD-5.1 on a diskless VIA system: just cpu, ram, ethernet, screen: it netboots then mounts partitions from my main machine via NFS. Very nice: zero noise, reliable, no sysadm duties. The diskless support for 5.1 is really quite nice; man diskless. In the past, I've run NetBSD diskless on Sun IPX and ELC systems. I suspect that if the SunRays do a PXE boot then they can be given addresses by DHCP, boot files via TFTP, and filesystems via NFS -- just like any other diskless client. I don't know if FreeBSD runs on SunRay's CPU, however. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: RFC1323 extension
"fbsd_user" <[EMAIL PROTECTED]> writes: > >From an network security view point, > Is it good to disable this in rc.conf? > > tcp_extensions="NO"# No means the RFC1323 extension are > disabled > # can only be > turned off here in rc.conf >From a security point of view, it won't make any difference at all. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: apcupsd
Hi... I have the same UPS and cable running with apcupsd on FreeBSD 4.8. I have nothing but good things to say about the UPS and apcupsd. Detects and reports power failures and power restores. Properly halts the system upon reaching remaining-charge-percentage or time-until-failure thresholds. I have messages logging to stdout and to apcupsd.log via syslog. apcupsd does not send out email notification (AFAIK) but I have swatch configured to email me any apcupsd syslog messages. I receive bi-weekly self-test messages. It has been working flawlessly for about 18 months. Chris Barry Skidmore wrote: OS: 5.1-RELEASE UPS: Back-UPS 650, serial interface Cable: 940-0020B With the above setup apcupsd detects a power failure, but not a return of power, and thus does not send a notification email. Also, apcupsd does not halt the system. I noticed in the docs that for this to work on FreeBSD you need a Smart UPS, and use the --kill-on-powerfail option at the command line. Since I do not have a Smart UPS, I have not tried this option. My question is what model number of APC UPS is working well for you with apcupsd 3.10.6 My current setup did work fine with Red Hat 9.0 and upcupsd 3.8.0, so I do not think this is an issue with the cable. Thanks, Barry On Mon, 2003-12-08 at 01:22, Robert Huff wrote: Hello: Are there any users of apcupsd on the list? If so, please respond to me privately. I have a question about recommended UPS's that work well with FreeBSD. There are. :-) QHat's the question? Robert Huff ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]" -- Christopher Hollow - Technical Consultant Infrastructure & Technology Support Toronto, ON ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Can you please forward to your users - (2) Available positions in Houston - see within - thank you.
Extreme Technologies, Inc. has two positions that we are actively recruiting for on behalf of a client (Fortune 500 company w/ approx. 6000 employees located in Houston, Texas). These are both high profile and Full Time Employee roles within the organization. Details on Environment Sun Solaris E10K HW T3 Sun Storage IBM Shark EMC Symmetrix #1 Storage Lead Storage Expert with Leadership background. Must know Storage Theory. Strong Implementation experience. Complex environment. Numerous Projects slated for next year. #2 Operations Manager (Unix Group) High level position overseeing day to day production support. Must be have technical background in Unix environment. Planning and Forecasting experience. Motivator and strong communicator. Overseeing multiple teams and projects daily. I appreciate your help - please call me with any questions. Kind Regards, Craig Guidry Extreme Technologies, Inc. (281) 392.1717 - phone (281) 392.1771 - fax [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
It's very important replying me, please
Dear Sir, My name is Ziad Fazah. Indeed, after having configured adequately Freebsd version 5.1 on my pc, I noticed that there was a mistake on the non-detection of my Samsung Syncmaster monitor through the XF86Config. Thus, I do ask you, whether Freebsd supports Samsung Syncmaster monitor or not? Because according to my settings, there was a mistake concerning my monitor in /etc/X11/XF86Config... It turns out that the question was seeking an identifier for my monitor through the XF86Config. Thus, I answered:Samsung, but the answer was wrong , therefore, I couldn't proceed. So please, tell me what to do,referring to the identifier that I do need to write for the monitor, in order to have all settings correct in XF86Config. In anyway, I shall be awaiting your response as soon as possible, and thanks a lot for your understanding. Sincerely, Ziad Fazah ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: apcupsd
Chris, May I ask what version of apcupsd you are running? When I switched from linux to FreeBSD, I also upgraded apcupsd from 3.8.0 to 3.10.6 Also note that we are using different versions of FreeBSD (4.8 -vs- 5.1). Thanks, Barry On Mon, 2003-12-08 at 12:58, HOLLOW, CHRISTOPHER wrote: >I have the same UPS and cable running with apcupsd on FreeBSD 4.8. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
RE: It's very important replying me, please
Ziad, I've never entered any identifier other than the default. What I usually find works for me is simply running xf86cfg either from an xterm window or from within /stand/sysinstall. I let it run, once it's up, I simply quit. XFree86 has always been able to properly detect the necessary settings. HTH Eric F Crist President AdTech Integrated Systems, Inc (612) 998-3588 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of camuflag Sent: Monday, December 08, 2003 3:06 PM To: [EMAIL PROTECTED] Subject: It's very important replying me, please Dear Sir, My name is Ziad Fazah. Indeed, after having configured adequately Freebsd version 5.1 on my pc, I noticed that there was a mistake on the non-detection of my Samsung Syncmaster monitor through the XF86Config. Thus, I do ask you, whether Freebsd supports Samsung Syncmaster monitor or not? Because according to my settings, there was a mistake concerning my monitor in /etc/X11/XF86Config... It turns out that the question was seeking an identifier for my monitor through the XF86Config. Thus, I answered:Samsung, but the answer was wrong , therefore, I couldn't proceed. So please, tell me what to do,referring to the identifier that I do need to write for the monitor, in order to have all settings correct in XF86Config. In anyway, I shall be awaiting your response as soon as possible, and thanks a lot for your understanding. Sincerely, Ziad Fazah ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]" ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: It's very important replying me, please
On Mon, Dec 08, 2003 at 04:05:49PM -0500, camuflag wrote: > Dear Sir, > > My name is Ziad Fazah. Please use a more descriptive subject when sending support requests. Everyone who posts support questions thinks it is very important that someone answer their question. Kris pgp0.pgp Description: PGP signature
php4-cli install with mod_php4
hi all i'd like to run a php file as a cron job on my apache box. in order to do this, i'm trying to install /usr/ports/lang/php4-cli. i cd to the dir, make install clean, set php compile options, etc. it errors out like this: --snip-- # make install ===> Installing for php4-cli-4.3.4_2 ===> php4-cli-4.3.4_2 conflicts with installed package(s): mod_php4-4.3.4_2,1 They install files into the same place. Please remove them first with pkg_delete(1). *** Error code 1 Stop in /usr/ports/lang/php4-cli. *** Error code 1 Stop in /usr/ports/lang/php4-cli. --snip-- what's the best way to get php4-cli installed on a box with mod_php4? any suggestions would be appreciated thanks redmond -- FreeBSD 5.1-RELEASE-p10 FreeBSD 5.1-RELEASE-p10 #0: Fri Oct 3 21:30:51 CDT 2003 12:30PM up 14 days, 9:42, 5 users, load averages: 0.00, 0.05, 0.09 Bare feet magnetize sharp metal objects so they point upward from the floor -- especially in the dark. pgp0.pgp Description: PGP signature
Re: Deinstalling questions....
Hi! > Is there a way to uninstall a package installed via make && make > install ??? I mean, when I compile a package it is installed on > /usr/local and through a tree, then if I want to uninstall it I have > to delete the files one per one... If you installed from ports, then go to the directory of the port you want to uninstall and enter: make deinstall If you downloaded the source tarball and compiled the source yourself, then you need to delete the files manually. -- Toomas Aas | [EMAIL PROTECTED] | http://www.raad.tartu.ee/~toomas/ * Fear of crowded holiday shopping: Santaclaustrophobia. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Open Source Groupware
Hello! My name is Jorge L. Vargas and I am currently pursuing an MS degree in Information Technology through ASPEN University, Denver CO (online - www.aspen.edu). As part of the degree requirements I need to develop a Capstone project applicable to the area of study; in my case I selected Open Source Software as the area of research. The project title, of which I am including the proposal made to the university, is: Is Open Source Software Ready for the Enterprise Messaging and Collaboration Needs? My intention is to research the Open Source messaging and collaboration solutions readiness when compared with proprietary alternatives, specifically MS Exchange. What am I looking for? If you could help me identifying case studies, references, evaluations or any piece of information that compares MS Exchange with Open Source email and groupware alternatives I would really appreciate that. I really believe that Open Source email and groupware is a viable alternative for most modern organizations and intend to develop a paper that helps any IT Manager to understand and evaluate such alternative. If you need further information please feel free to contact me at: Jorge L. Vargas PO Box 141228 Arecibo, PR 00614-1228 Tel. 787-644-5300 Email: [EMAIL PROTECTED] Regards, Jorge Capstone Project Proposal ASPEN 599.pdf Description: Capstone Project Proposal ASPEN 599.pdf ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: running freebsd with sendmail and qpopper
At 09:33 AM 12/8/2003, Steve Bertrand wrote: > >- your client computer name is client.example.com > > delliver.mshome.net > Change it to delliver.face2interface.domain, and add this entry into your DNS zone file. AFAIK this can't be done though I don't claim to be a windows os expert. I get to name the computer delliver and windows seems to stick in the mshome.net part. Also if I can change it this will make the other 3 windows boxes on the lan invisible to this client perhaps? So I might be better of changing my hostname for the server from swamisalami.face2interface.domain to swamisalami.mshome.net. Can you please explain why this is even necessary? Also, assuming I do make this change, where and how on the zone file is the required change? Marty Landman Face 2 Interface Inc 845-679-9387 Sign On Required: Web membership software for your site Make a Website: http://face2interface.com/Home/Demo.shtml ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Network card problems
Hi list, I've recently decided to give the 4.x series a try, but unfortunately I can't configure my network on 4.9-R. It seems that the device module fails to initialize, dmesg gives me this: rl0: irq 10 at device 13.0 on pci0 rl0: couldn't map ports/memory device_probe_and_attach: rl0 attach returned 6 As you can see it's a RealTek ethernet card. It worked well on 5.1 though, any ideas on how I could fix the problem? Thanks in advance, Mihail - Hot Mobiil - helinad, logod ja piltsõnumid! http://portal.hot.ee ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: php4-cli install with mod_php4
Redmond Militante wrote: hi all i'd like to run a php file as a cron job on my apache box. in order to do this, i'm trying to install /usr/ports/lang/php4-cli. i cd to the dir, make install clean, set php compile options, etc. it errors out like this: --snip-- # make install ===> Installing for php4-cli-4.3.4_2 ===> php4-cli-4.3.4_2 conflicts with installed package(s): mod_php4-4.3.4_2,1 They install files into the same place. Please remove them first with pkg_delete(1). *** Error code 1 Stop in /usr/ports/lang/php4-cli. *** Error code 1 Stop in /usr/ports/lang/php4-cli. --snip-- what's the best way to get php4-cli installed on a box with mod_php4? any suggestions would be appreciated thanks redmond Maybe 3 options: 1. Do as it says and uninstall mod_php4, then build /usr/ports/lang/php4, which will install CGI, CLI and Apache so module. 2. If you've gotten this far, there's a CLI executable built somewhere in the "work" subdirectory. You could install it yourself, but it wouldn't be registered, I guess...a terrible hack, probably :-) 3. Have you tried $make FORCE_PKG_REGISTER=yes install ? (Saving "make clean for later, just in case???") HTH, Kevin Kinsey ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: running freebsd with sendmail and qpopper
On Mon, 2003-12-08 at 14:30, Marty Landman wrote: > At 09:33 AM 12/8/2003, Steve Bertrand wrote: > > > > >- your client computer name is client.example.com > > > > > > delliver.mshome.net > > > > > > >Change it to delliver.face2interface.domain, and add this entry into your > >DNS zone file. > > AFAIK this can't be done though I don't claim to be a windows os expert. I > get to name the computer delliver and windows seems to stick in the > mshome.net part. Also if I can change it this will make the other 3 windows > boxes on the lan invisible to this client perhaps? So I might be better of > changing my hostname for the server from swamisalami.face2interface.domain > to swamisalami.mshome.net. > > Can you please explain why this is even necessary? Also, assuming I do make > this change, where and how on the zone file is the required change? > Your client computer name does not need to be changed. As long as you have a zone file for your domain (face2interface.domain) and an mx record within that zone, then you can send mail to [EMAIL PROTECTED] (given that you have set up your sendmail files correctly) The name on the actual workstation is irrelevant as the mail server does not care what domain or workgroup your windows computer belongs to. It is only DNS and the mail server daemons that must know about each other as mail coming in will be kept or discarded based on the destination username and domain name it is sent to. Steve > > Marty Landman Face 2 Interface Inc 845-679-9387 > Sign On Required: Web membership software for your site > Make a Website: http://face2interface.com/Home/Demo.shtml -- Steve Bertrand President/CTO, Northumberland Network Services t: 905.352.2688 w: www.northnetworks.ca ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Open Source Groupware
> Is Open Source Software Ready for the Enterprise > Messaging and Collaboration Needs? > Sure. Search http://sourceforge.net for 'collaboration'. Steve > My intention is to research the Open Source messaging > and collaboration solutions readiness when compared > with proprietary alternatives, specifically MS > Exchange. What am I looking for? If you could help me > identifying case studies, references, evaluations or > any piece of information that compares MS Exchange > with Open Source email and groupware alternatives I > would really appreciate that. I really believe that > Open Source email and groupware is a viable > alternative for most modern organizations and intend > to develop a paper that helps any IT Manager to > understand and evaluate such alternative. If you need > further information please feel free to contact me at: > > Jorge L. Vargas > PO Box 141228 > Arecibo, PR 00614-1228 > Tel. 787-644-5300 > Email: [EMAIL PROTECTED] > > Regards, > > Jorge > > __ > ___ > [EMAIL PROTECTED] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" -- Steve Bertrand President/CTO, Northumberland Network Services t: 905.352.2688 w: www.northnetworks.ca ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Accessing DOCSIS diagnostics from within/behind FreeBSD router
Guys, I'm not sure if this is even a FreeBSD question, but googling hasn't turned up much on it, so I thought I'd toss this one out there. I have a Motorola SB5100 cable modem directly attached to a FreeBSD router (running ipfilters/ipnat). The external network is a comcast segment, and is assigned a dynamic IP. The internal network is routed on 192.168.1.x, where the router is 192.168.1.254. The trick is, the cable modem is on the "external" side, but apparently listening on 192.168.1.100 for HTTP requests (for its diagnostics report). Is there anyway to access this diagnostic page without temporarily plugging the CM into a Windows box? Thanks, Seth Henry ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Accessing DOCSIS diagnostics from within/behind FreeBSD router
> I have a Motorola SB5100 cable modem directly attached to a FreeBSD router > (running ipfilters/ipnat). The external network is a comcast segment, and is > assigned a dynamic IP. The internal network is routed on 192.168.1.x, where > the router is 192.168.1.254. > > The trick is, the cable modem is on the "external" side, but apparently > listening on 192.168.1.100 for HTTP requests (for its diagnostics report). > > Is there anyway to access this diagnostic page without temporarily plugging > the CM into a Windows box? > Since 192.168.1.x subnet is on the inside of the network, your FBSD box will never route a request for an IP on that network outbound by default. I may be shown up here, but you will probably be best changing your internal network to another subnet 192.168.0.x perhaps, and then your FBSD router should pass toward the Internet a request for 192.168.1.100, and hopefully the comcast modem will catch it. Steve > Thanks, > Seth Henry > > ___ > [EMAIL PROTECTED] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" -- Steve Bertrand President/CTO, Northumberland Network Services t: 905.352.2688 w: www.northnetworks.ca ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Posts to mailing list still being rejected.
Hey all, I sent an email a couple weeks ago about my posts being rejected with a 550: Message Content Rejected. Someone directed my to www.ordb.org and pointed out that the IP address of the mail server I'm using was listed as an open relay. I've now taken measures to remedy this, as displayed here: http://www.ordb.org/lookup/?host=216.136.204.125 Alas, my posts are still being rejected with the 550: Message Content Rejected. Giving up on 216.136.204.125. Please help me! TIA Eric ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: php4-cli install with mod_php4
On Mon, Dec 08, 2003 at 12:37:32PM -0600, Redmond Militante wrote: > i'd like to run a php file as a cron job on my apache box. in order > to do this, i'm trying to install /usr/ports/lang/php4-cli. I seem to remember reading on the list that if you run make in /usr/ports/lang/php4 without explicitly asking for either mod_php4 or php4-cli/cgi, then by default it will install php4-cli and mod_php4 IF it finds you have apache installed. Worth trying out perhaps. -- Jez Hancock - System Administrator / PHP Developer http://munk.nu/ ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Routing problem
Hello, Running 4.9-stable. Here is a brief overview of the network I'm setting up. ***Internet*** | DSL modem (192.168.1.1, netmask 255.255.255.252, assigned by ISP) | FreeBSD gateway external (192.168.1.2, netmask 255.255.255.252, assigned by ISP) | FreeBSD gateway internal (10.0.0.1, netmask 255.255.255.0) | LAN (clients, 10.0.0.x, netmask 255.255.255.0) LAN clients can access boh gateway interfaces by hostname and IP. Clients are setup to use 192.168.1.2 for DNS, and 192.168.1.2 uses 192.168.1.1 for DNS. I cannot get any traffic to reach (let alone pass) the DSL modem from the clients. I have tried this with the FreeBSD gateway, a Win2k gateway, and Linksys router. Under any setup, the result is the same. My ISP's support desk has been absolutely no help. Can anyone tell what the problem may be here? Thanks in advance for any help. -- Best Regards, Joshua Lokken _ Wonder if the latest virus has gotten to your computer? Find out. Run the FREE McAfee online computer scan! http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963 ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: running freebsd with sendmail and qpopper
At 02:35 PM 12/8/2003, Steve Bertrand wrote: Your client computer name does not need to be changed. As long as you have a zone file for your domain (face2interface.domain) and an mx record within that zone, then you can send mail to [EMAIL PROTECTED] (given that you have set up your sendmail files correctly) Eudora on the windows client complains that it can't resolve mail.face2interface.domain, and the results on the freebsd box are similar Swami: ping mail.face2interface.domain ping: cannot resolve mail.face2interface.domain: Unknown host AFAIK I've set up everything as you said... should I post all the files to the list? Marty Landman Face 2 Interface Inc 845-679-9387 Sign On Required: Web membership software for your site Make a Website: http://face2interface.com/Home/Demo.shtml ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: scripts
Please, if you know, tell me any sites with documentation about sh scripts(for beginners)(i mean files with .sh extension). Thank you! __ Do you Yahoo!? New Yahoo! Photos - easier uploading and sharing. http://photos.yahoo.com/ ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Routing problem
> LAN clients can access boh gateway interfaces by hostname and IP. Clients > are > setup to use 192.168.1.2 for DNS, and 192.168.1.2 uses 192.168.1.1 for DNS. > I cannot get any traffic to reach (let alone pass) the DSL modem from the > clients. > > I have tried this with the FreeBSD gateway, a Win2k gateway, and Linksys > router. > Under any setup, the result is the same. My ISP's support desk has been > absolutely no help. Can anyone tell what the problem may be here? Thanks > in > advance for any help. > If your ISP is anything like this one, your modem will have NAT translation built in, meaning that is likely your default gateway. On your FBSD router, you never implied that it could/couldn't see the Internet. I take it that if you put a PC into the modem and set it's default gateway to 1.1 (the modem probably assigns this via DHCP anyway), then you can get online. If this is the case, then the secondary router is no use unless used as a firewall. In that case, you wouldn't need to route, and you could just set it up as an IP-less bridge firewall. Regards, Steve > > -- > Best Regards, > > Joshua Lokken > > _ > Wonder if the latest virus has gotten to your computer? Find out. Run the > FREE McAfee online computer scan! > http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963 > > ___ > [EMAIL PROTECTED] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" -- Steve Bertrand President/CTO, Northumberland Network Services t: 905.352.2688 w: www.northnetworks.ca ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: scripts
On Mon, 2003-12-08 at 15:32, Valerian Galeru wrote: > Please, if you know, tell me any sites with > documentation about sh scripts(for beginners)(i mean > files with .sh extension). Thank you! > Search http://google.com for 'shell scripting' Steve > __ > Do you Yahoo!? > New Yahoo! Photos - easier uploading and sharing. > http://photos.yahoo.com/ > ___ > [EMAIL PROTECTED] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" -- Steve Bertrand President/CTO, Northumberland Network Services t: 905.352.2688 w: www.northnetworks.ca ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Console resolution
Hi ! I have just installed FreeBSD onto my notebook. I am using FreeBSD for quite some time, and now I decided to install it on my notebook (I got tired of both RedHat and Windows 2000, which both didn't work as they should (I had both installed on same computer)) and remove everything else from it. Problem is that this notebok Toshiba, has *very* ugly system font. On RedHat I solved this problem, by giving higher resolution to text mode (which I what I would like to do here). I am wondering if this is also possible on freebsd. I use text mode a lot, so this is quite important, I use Xwindows only if I must... Take care. Andy ** * Aleksander Rozman - Andy * Fandoms: E2:EA, SAABer, Trekkie, Earthie * * [EMAIL PROTECTED] * Sentinel, BH 90210, True's Trooper, * *[EMAIL PROTECTED] * Heller's Angel, Questie, Legacy, PO5, * * Maribor, Slovenia (Europe) * Profiler, Buffy (Slayerete), Pretender* * ICQ-UIC: 4911125 * * PGP key available *http://www.atechnet.dhs.org/~andy/ * ** ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Posts to mailing list still being rejected.
> I sent an email a couple weeks ago about my posts > being rejected with a 550: Message Content Rejected. > Someone directed my to www.ordb.org and pointed out > that the IP address of the mail server I'm using was > listed as an open relay. I've now taken measures to > remedy this, as displayed here: > > http://www.ordb.org/lookup/?host=216.136.204.125 > > Alas, my posts are still being rejected with the 550: > Message Content Rejected. Giving up on > 216.136.204.125. > Funny, I had this today, this AM, but it appeared to go away itself, and the messages (or at least one of them) that I had sent that came back with the error actually showed up on the list some 1.5 hrs later. Steve > Please help me! > > TIA > > Eric > ___ > [EMAIL PROTECTED] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" -- Steve Bertrand President/CTO, Northumberland Network Services t: 905.352.2688 w: www.northnetworks.ca ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: running freebsd with sendmail and qpopper
> Eudora on the windows client complains that it can't resolve > mail.face2interface.domain, and the results on the freebsd box are similar > > Swami: ping mail.face2interface.domain > ping: cannot resolve mail.face2interface.domain: Unknown host > > AFAIK I've set up everything as you said... should I post all the files to > the list? > Sure. One at a time though. Start with your zone file. Steve > Marty Landman Face 2 Interface Inc 845-679-9387 > Sign On Required: Web membership software for your site > Make a Website: http://face2interface.com/Home/Demo.shtml -- Steve Bertrand President/CTO, Northumberland Network Services t: 905.352.2688 w: www.northnetworks.ca ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
RE: NATd question
Hi dear Asher, First: Thank you TOO much for your detailed replay, its really a help! in your configurations you depend that ISP will give the BSD an IP. But in fact, Iam using a DSL MODEM ROUTER, which will call the internet automatically, and will assign (the router) the IP 192.168.0.1 plus the real ip which ISP will give. and this Router will be connected to the FreeBSD box. This is why I'm missed, in your sweet drawing (wan nic)FreeBSD(lan nic) what the gateway should be? The router IP I assume? is it on (wan nic)? and do i need a DHCP?on xl0 ? manly im setting this configuration just to controll the network I need to block some IPs from internet and someother IPs a few ports, so im setting this BSD box because of the ipfw rules.. Can you explain it accoring to DSL MODEM ROUTER which will assign an IP automaticaly ? how we will setup the freebsd to be the main gateway for clinets? insted the router? Iam sory for the long email. VERY warm thanks for you. Marwan On Mon, 8 Dec 2003 08:47:22 -0600, Bill Asher wrote > Do you have a static IP you can use on the BSD box? Typically when > we setup DSL we take it straight from the DSL or Cable "modem" to > the BSD Box which gets assigned an IP address from the provider > either static or dynamic. You then run NATD for your internal > clients to use the FreeBSD's public IP. Like so: > > Internet --> DSL Modem --> (wan nic)FreeBSD(lan nic) --> Switch/Hub - > -> Clients > > FreeBSD IPs > Wan nic(xl0) = DHCP > Lan nic(xl1) = 10.2.2.1 > > To assign your IP addressess edit /etc/rc.conf, Heres and example using > DHCP on the wan nic: > > defaultrouter="10.2.2.1" > gateway_enable="YES" > hostname="fw01.domain.com" > ifconfig_xl0="DHCP" > ifconfig_xl1="inet 10.2.2.1 netmask 255.255.255.0" > linux_enable="YES" > sendmail_enable="YES" > sshd_enable="YES" > usbd_enable="YES" > natd_program="/sbin/natd" # path to natd, if you want a different > one. > natd_enable="YES"# Enable natd (if firewall_enable == > YES). > natd_interface="xl0" # Public interface or IPaddress to > use. natd_flags="-f /etc/natd.cf"# Additional flags for natd. > > Your clients would be setup like this: > Client 01 > IP = 10.2.2.10 > Gateway = 10.2.2.1 > DNS = Your.DNS.Server.IP > > You can run DHCP server on your FreeBSD box to hand Ips out to your > clients if you'd like, make sure you bind it to your LAN Nic of your > FreeBDS box though. > > If you have Static Ips just substitute those instead of using DHCP > for your wan nic. > > Hope this helps, this is just the way I do it. > > Let me know if you have other questions in setting this up. > > B.Asher - PND,LLC - www.protechnet.com > > -Original Message- > From: Marwan Sultan [mailto:[EMAIL PROTECTED] > Sent: Sunday, December 07, 2003 10:56 AM > To: FreeBSD questions List > Subject: NATd question > > Hello Everybody, > >Im on FreeBSD 4.8-R fresh installation. >and this is the configuration i will use on my LAN > >Internet ->connected-> DSL Router -> FreeBSD box -> HUB -> LAN > >DSL Router has an IP 192.168.0.1 and the real IP too. > >FreeBSD box has 2 NIC's >My question is: > >Where and How to sign 2 IPs for 2 NICs? > >which IP the NIC connected to DSL should sign? >Which IP the NIC connected to HUB should sign? >Which of these IPs will be as gateway IP the clients will sign? > >I have read the instructions of freebsd.org, >and it says the gateway will be the BSD machine 192.168.0.1 >BUT this IP in my LAN is signed to the router automatilcaly. > >Can someone explain? advise? This machine will be only for this use. > >Thank you > -- > Marwan Sultan > > ___ > [EMAIL PROTECTED] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "[EMAIL PROTECTED]" -- Marwan Sultan Network Administrator ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Network card problems
Disable PnP in the BIOS. ...on another note, I might also suggest that you Google it before you post to the list. The string "rl0: couldn't map ports/memory" yeilded 200+ hits, including... http://forums.devshed.com/t96110/sad86d82783609825578e8cca8b281a55.html http://www.geocrawler.com/mail/thread.php3?subject=rl0%3A+couldn%60t+map+ports%2Fmemory&list=160 Chris Mihail wrote: Hi list, I've recently decided to give the 4.x series a try, but unfortunately I can't configure my network on 4.9-R. It seems that the device module fails to initialize, dmesg gives me this: rl0: irq 10 at device 13.0 on pci0 rl0: couldn't map ports/memory device_probe_and_attach: rl0 attach returned 6 As you can see it's a RealTek ethernet card. It worked well on 5.1 though, any ideas on how I could fix the problem? Thanks in advance, Mihail - Hot Mobiil - helinad, logod ja piltsõnumid! http://portal.hot.ee ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]" -- Christopher Hollow - Technical Consultant Infrastructure & Technology Support Toronto, ON ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Routing problem
This setup appears a little confusing. Does your ISP give you a static or dynamic IP address to the internet? It would also help to see the interface configuration info in your rc.conf file. generally speaking, your external interface should have the ip address assigned by your isp, not a private network address like you describe. You should also have a valid address to a dns server, rather than being referred to your dsl modem's private ip address. #my rc.conf (cable modem, with ip dynamically assigned - I'm using 192.168.1.0 as my private network range) gateway_enable="YES" defaultrouter="192.168.1.1" network_interfaces="fxp0 dc0 lo0" hostname="vesta.bitheaven.net" ifconfig_fxp0="DHCP" ifconfig_dc0="inet 192.168.1.1 netmask 255.255.255.0" If this doesn't help, send more info On Dec 8, 2003, at 12:22 PM, joshua lokken wrote: Hello, Running 4.9-stable. Here is a brief overview of the network I'm setting up. ***Internet*** | DSL modem (192.168.1.1, netmask 255.255.255.252, assigned by ISP) | FreeBSD gateway external (192.168.1.2, netmask 255.255.255.252, assigned by ISP) | FreeBSD gateway internal (10.0.0.1, netmask 255.255.255.0) | LAN (clients, 10.0.0.x, netmask 255.255.255.0) LAN clients can access boh gateway interfaces by hostname and IP. Clients are setup to use 192.168.1.2 for DNS, and 192.168.1.2 uses 192.168.1.1 for DNS. I cannot get any traffic to reach (let alone pass) the DSL modem from the clients. I have tried this with the FreeBSD gateway, a Win2k gateway, and Linksys router. Under any setup, the result is the same. My ISP's support desk has been absolutely no help. Can anyone tell what the problem may be here? Thanks in advance for any help. -- Best Regards, Joshua Lokken _ Wonder if the latest virus has gotten to your computer? Find out. Run the FREE McAfee online computer scan! http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963 ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]" ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Using multiple zip disks
from the ZIP FAQ I constructed the following script: [501]->cat makezip.sh #!/bin/sh dd if=/dev/zero of=/dev/da0 count=2 disklabel -Brw da0 auto newfs /dev/da0c HTH David. On Mon, 24 Nov 2003, Charles Howse wrote: > Hi, > I have an external USB Iomega Zip 250 drive that is working properly after I > configured it using sysinstall. I have added an entry to fstab that allows > me to just enter "mount /zip" to mount it. > > /dev/da0s1e /zipufs rw,noauto 0 0 > > The problem is that I have more than one zip disk that I would like to use. > I have some zip 100's and some zip 250's. > > The only disk that has a ufs filesystem on it is the one that was in it when I > configured it, a zip 100. > > What is the proper way in 4.8 to prepare my other disks so that I can insert > any of them, regardless of the size, and just enter "mount /zip"? > > I'm thinking use sysinstall with one of the zip 250's in the drive, configure > a new slice, and mount it at /zip2...? Then I would "mount /zip2" > > Then maybe I can just insert one of the zip 100's, and manually put a > filesystem on it like I was installing a new HD...? > > Am I close? Is there a *real* easy way? > > -- > Thanks, > Charles > http://howse.homeunix.net > > Random Murphy's Law: > The inside contact that you have developed at great > expense is the first person to be let go in any > reorganization. > > ___ > [EMAIL PROTECTED] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" > > > ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: running freebsd with sendmail and qpopper
At 03:39 PM 12/8/2003, Steve Bertrand wrote: Sure. One at a time though. Start with your zone file. Ok, btw email within the fbsd email server has been unaffected so far, i.e. it worked before and works now. I notice that while I can ping swamisalami from both the server and client boxes I can't ping swamisalami.face2interface.domain from either box. swamisalami.face2interface.domain is my rc.conf specified hostname, but since I don't actually understand most of what I'm doing here it's hardly a stretch of the imagination to speculate that I've coded something inconsistent elsewhere. Also I've setup the server ip 192.168.0.7 as the dns server for the client box; on both the nic and modem properties. FreeB cat /etc/namedb/face2interface.domain.zone $TTL 360 ; Default cached time to live for all records face2interface.domain.IN SOA ns.face2interface.domain. [EMAIL PROTECTED] ( 2003120401; Serial 172800 ; Refresh every 2 days 3600; Retry every hour 1728000 ; Expire every 20 days 172800 ); Minimum 2 days @ IN NS ns.face2interface.domain. ; Set the Mail Exchange record @ IN MX 10 mail.face2interface.domain. ns IN A192.168.0.7 mailIN A192.168.0.7 client IN A192.168.0.1 router IN A192.168.0.1 Marty Landman Face 2 Interface Inc 845-679-9387 Sign On Required: Web membership software for your site Make a Website: http://face2interface.com/Home/Demo.shtml ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: running freebsd with sendmail and qpopper
On Mon, 2003-12-08 at 15:54, Marty Landman wrote: > At 03:39 PM 12/8/2003, Steve Bertrand wrote: > > >Sure. One at a time though. Start with your zone file. > > Ok, btw email within the fbsd email server has been unaffected so far, i.e. > it worked before and works now. > > I notice that while I can ping swamisalami from both the server and client > boxes I can't ping swamisalami.face2interface.domain from either box. > swamisalami.face2interface.domain is my rc.conf specified hostname, but > since I don't actually understand most of what I'm doing here it's hardly a > stretch of the imagination to speculate that I've coded something > inconsistent elsewhere. Also I've setup the server ip 192.168.0.7 as the > dns server for the client box; on both the nic and modem properties. > > FreeB cat /etc/namedb/face2interface.domain.zone > $TTL 360 ; Default cached time to live for all records > > > face2interface.domain.IN SOA ns.face2interface.domain. > [EMAIL PROTECTED] > ( > 2003120401; Serial > 172800 ; Refresh every 2 days > 3600; Retry every hour > 1728000 ; Expire every 20 days > 172800 ); Minimum 2 days > > > @ IN NS ns.face2interface.domain. > > > ; Set the Mail Exchange record > > > @ IN MX 10 mail.face2interface.domain. > > > ns IN A192.168.0.7 > mailIN A192.168.0.7 > client IN A192.168.0.1 > router IN A192.168.0.1 > Is the A records above correct? ie: is the DNS/mail server actually 192.168.0.7, or something else? If they are different than 0.7, change them accordingly, change the ;serial number above to 2003120801 and reload the name server: # ndc restart && tail -10 /var/log/messages | grep named and make sure the name server is 'ready to answer queries'. If that fails, check to see if /etc/resolv.conf has it's primary nameserver statement like this: nameserver 127.0.0.1 and make sure your client computer is looking to your DNS servers IP for DNS. If all fails, next send the named.conf file. Steve > > Marty Landman Face 2 Interface Inc 845-679-9387 > Sign On Required: Web membership software for your site > Make a Website: http://face2interface.com/Home/Demo.shtml > > ___ > [EMAIL PROTECTED] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" -- Steve Bertrand President/CTO, Northumberland Network Services t: 905.352.2688 w: www.northnetworks.ca ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Console resolution
try "man 1 vidcontrol" hth seb On Mon, 2003-12-08 at 21:35, Aleksander Rozman - Andy wrote: > Hi ! > > I have just installed FreeBSD onto my notebook. I am using FreeBSD for > quite some time, and now I decided to install it on my notebook (I got > tired of both RedHat and Windows 2000, which both didn't work as they > should (I had both installed on same computer)) and remove everything else > from it. > Problem is that this notebok Toshiba, has *very* ugly system font. On > RedHat I solved this problem, by giving higher resolution to text mode > (which I what I would like to do here). I am wondering if this is also > possible on freebsd. I use text mode a lot, so this is quite important, I > use Xwindows only if I must... > > Take care. > Andy > > > ** > * Aleksander Rozman - Andy * Fandoms: E2:EA, SAABer, Trekkie, Earthie * > * [EMAIL PROTECTED] * Sentinel, BH 90210, True's Trooper, * > *[EMAIL PROTECTED] * Heller's Angel, Questie, Legacy, PO5, * > * Maribor, Slovenia (Europe) * Profiler, Buffy (Slayerete), Pretender* > * ICQ-UIC: 4911125 * > * PGP key available *http://www.atechnet.dhs.org/~andy/ * > ** > > ___ > [EMAIL PROTECTED] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" > ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Console resolution
On Mon, Dec 08, 2003 at 09:35:57PM +0100, Aleksander Rozman - Andy wrote: > Problem is that this notebok Toshiba, has *very* ugly system font. On > RedHat I solved this problem, by giving higher resolution to text mode > (which I what I would like to do here). I am wondering if this is also > possible on freebsd. I use text mode a lot, so this is quite important, I > use Xwindows only if I must... You can try playing with the various /etc/rc.conf settings to tweak console display. I have this in mine: keymap="uk.cp850" keyrate="fast" font8x8="swiss-8x8" allscreens_flags="80x50" This is ok for me here in the UK - you might have to play around with different fonts if you use a different keymap. The screen flags setting just changes the display to 80x50 instead of the default 80x25. Note you can test those settings out from the console using kbdcontrol. -- Jez Hancock - System Administrator / PHP Developer http://munk.nu/ ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: SUNRays
[CCed to -sparc: Can SunRay boxes be made to work with FreeBSD?] Chris Shenton wrote: Andrew Boothman <[EMAIL PROTECTED]> writes: They are *really* thin clients that really only consist of a monitor, mouse and keyboard and rely on their host server for everything else. That's not an architecture that you're going to get FreeBSD to run under I wouldn't think. I suspect that if the SunRays do a PXE boot then they can be given addresses by DHCP, boot files via TFTP, and filesystems via NFS -- just like any other diskless client. There's the thing - I don't think that the Rays are capable of doing something like that. If you look at http://wwws.sun.com/sunray/sunray150/features.html which is a list of features for the most 'advanced' SunRay that is available - you'll see that, "All computing is performed on the server". In other words, there is no local processor - nothing to run a local FreeBSD kernel (or anything else) on. The rays depend entirely on their host server for all computation, I don't think they even have any local memory so they are not simply a diskless box in the usual sense - as they would normally have local CPU and memory. However, like I said before if they can be made to understand a normal X session then perhaps they could just act as X-servers or something similar? Do a google for "sunray linux" and see what Linux-type people have done, although from https://listman.redhat.com/archives/k12osn/2003-April/msg00797.html it doesn't look too hopeful that anyone has it working yet... Andrew ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: scripts
At Mon, 8 Dec 2003 it looks like Valerian Galeru composed: > Please, if you know, tell me any sites with > documentation about sh scripts(for beginners)(i mean > files with .sh extension). Thank you! Just an FYI on this Valerian. Scripts do not need to have the .sh extension on them to be executable scripts. -- |<--"Word-Wrap-At-72-Please"-->| Bill Schoolcraft PO Box 210076 -o) San Francisco CA 94121 /\ "UNIX, A Way Of Life."_\_v ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: running freebsd with sendmail and qpopper
At 04:07 PM 12/8/2003, Steve Bertrand wrote: > ns IN A192.168.0.7 > mailIN A192.168.0.7 > client IN A192.168.0.1 > router IN A192.168.0.1 Is the A records above correct? ie: is the DNS/mail server actually 192.168.0.7, or something else? I'm working with two computers on my lan. 192.168.0.1 runs xp, has dialup for the lan and is acting as my client (for testing) and router, I think, since it share dialup access via windows ics. # ndc restart && tail -10 /var/log/messages | grep named and make sure the name server is 'ready to answer queries'. Did it anyway to check for the msg: FreeB ndc restart && tail -10 /var/log/messages | grep named new pid is 336 Dec 8 16:29:56 SwamiSalami named[327]: face2interface.domain.zone: WARNING SOA expire value is less than SOA refresh+retry (2 < 2+600) Dec 8 16:29:56 SwamiSalami named[327]: face2interface.domain.zone: WARNING SOA expire value is less than refresh + 10 * retry (2 < (2 + 10 * 600)) Dec 8 16:29:56 SwamiSalami named[327]: face2interface.domain.zone: WARNING SOA expire value is less than 7 days (2) Dec 8 16:29:56 SwamiSalami named[327]: face2interface.domain.zone: WARNING SOA refresh value is less than 2 * retry (2 < 600 * 2) Dec 8 16:29:56 SwamiSalami named[327]: face2interface.domain.zone:7: Database error near () Dec 8 16:29:56 SwamiSalami named[327]: face2interface.domain.zone:8: Database error near () Dec 8 16:29:56 SwamiSalami named[327]: face2interface.domain.zone:9: Database error near () Dec 8 16:29:56 SwamiSalami named[327]: face2interface.domain.zone:10: Database error near ()) Dec 8 16:29:56 SwamiSalami named[327]: master zone "face2interface.domain" (IN) rejected due to errors (serial 0) Dec 8 16:29:56 SwamiSalami named[336]: Ready to answer queries. FreeB What did I do wrong in the zone file? It appears even though dns is enabled "ready to answer queries" my master zone, the whole point to this was done improperly. Where is the zone file instructions, assuming there is such a thing? Marty Landman Face 2 Interface Inc 845-679-9387 Sign On Required: Web membership software for your site Make a Website: http://face2interface.com/Home/Demo.shtml ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
avcheck-0.9.tgz
20031108 Las Vegas Nevada 89102 USA [EMAIL PROTECTED] Subj: avcheck-0.9.tgz I ran a WINDOWS Mcafee VirusScan of the FreeBSD install disk (v 4.7) included w/ the book 'SAMS Teach Yourself FreeBSD in 24 Hours' and it identified a file on the CD, avcheck-0.9.tgz' as a virus. Can you provide any other information regarding this file? Thank you. --rs ~+ ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Posts to mailing list still being rejected.
On Mon, Dec 08, 2003 at 03:35:57PM -0500, Steve Bertrand wrote: > > I sent an email a couple weeks ago about my posts > > being rejected with a 550: Message Content Rejected. > > Someone directed my to www.ordb.org and pointed out > > that the IP address of the mail server I'm using was > > listed as an open relay. I've now taken measures to > > remedy this, as displayed here: > > > > http://www.ordb.org/lookup/?host=216.136.204.125 > > > > Alas, my posts are still being rejected with the 550: > > Message Content Rejected. Giving up on > > 216.136.204.125. > > > > Funny, I had this today, this AM, but it appeared to go away itself, and > the messages (or at least one of them) that I had sent that came back > with the error actually showed up on the list some 1.5 hrs later. There was a temporary misconfiguration on the freebsd mail server. Kris pgp0.pgp Description: PGP signature
Re: running freebsd with sendmail and qpopper
On Mon, 2003-12-08 at 16:35, Marty Landman wrote: > At 04:07 PM 12/8/2003, Steve Bertrand wrote: > > > > ns IN A192.168.0.7 > > > mailIN A192.168.0.7 > > > client IN A192.168.0.1 > > > router IN A192.168.0.1 > > > >Is the A records above correct? ie: is the DNS/mail server actually > >192.168.0.7, or something else? > > I'm working with two computers on my lan. 192.168.0.1 runs xp, has dialup > for the lan and is acting as my client (for testing) and router, I think, > since it share dialup access via windows ics. > > ># ndc restart && tail -10 /var/log/messages | grep named > > > >and make sure the name server is 'ready to answer queries'. > > Did it anyway to check for the msg: Send back the first few lines in the zone file. Appears as there is a syntax error. Steve > > FreeB ndc restart && tail -10 /var/log/messages | grep named > new pid is 336 > Dec 8 16:29:56 SwamiSalami named[327]: face2interface.domain.zone: WARNING > SOA expire value is less than SOA refresh+retry (2 < 2+600) > Dec 8 16:29:56 SwamiSalami named[327]: face2interface.domain.zone: WARNING > SOA expire value is less than refresh + 10 * retry (2 < (2 + 10 * 600)) > Dec 8 16:29:56 SwamiSalami named[327]: face2interface.domain.zone: WARNING > SOA expire value is less than 7 days (2) > Dec 8 16:29:56 SwamiSalami named[327]: face2interface.domain.zone: WARNING > SOA refresh value is less than 2 * retry (2 < 600 * 2) > Dec 8 16:29:56 SwamiSalami named[327]: face2interface.domain.zone:7: > Database error near () > Dec 8 16:29:56 SwamiSalami named[327]: face2interface.domain.zone:8: > Database error near () > Dec 8 16:29:56 SwamiSalami named[327]: face2interface.domain.zone:9: > Database error near () > Dec 8 16:29:56 SwamiSalami named[327]: face2interface.domain.zone:10: > Database error near ()) > Dec 8 16:29:56 SwamiSalami named[327]: master zone "face2interface.domain" > (IN) rejected due to errors (serial 0) > Dec 8 16:29:56 SwamiSalami named[336]: Ready to answer queries. > FreeB > > What did I do wrong in the zone file? It appears even though dns is enabled > "ready to answer queries" my master zone, the whole point to this was done > improperly. Where is the zone file instructions, assuming there is such a > thing? > > > Marty Landman Face 2 Interface Inc 845-679-9387 > Sign On Required: Web membership software for your site > Make a Website: http://face2interface.com/Home/Demo.shtml -- Steve Bertrand President/CTO, Northumberland Network Services t: 905.352.2688 w: www.northnetworks.ca ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: avcheck-0.9.tgz
> I ran a WINDOWS Mcafee VirusScan of the FreeBSD install disk (v 4.7) > included w/ the book 'SAMS Teach Yourself FreeBSD in 24 Hours' and it > identified a file on the CD, avcheck-0.9.tgz' as a virus. > > Can you provide any other information regarding this file? > I'm almost certain that this file is a sample virus from within the clamav anti-virus package. The file (I think) is one that is used after the av is installed to ensure that the scanner is actually working. Steve > Thank you. > > --rs > ~+ > > ___ > [EMAIL PROTECTED] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" -- Steve Bertrand President/CTO, Northumberland Network Services t: 905.352.2688 w: www.northnetworks.ca ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: avcheck-0.9.tgz
RSB wrote: 20031108 Las Vegas Nevada 89102 USA [EMAIL PROTECTED] Subj: avcheck-0.9.tgz I ran a WINDOWS Mcafee VirusScan of the FreeBSD install disk (v 4.7) included w/ the book 'SAMS Teach Yourself FreeBSD in 24 Hours' and it identified a file on the CD, avcheck-0.9.tgz' as a virus. Can you provide any other information regarding this file? Thank you. --rs That would be the source tarball for the following 3rd party software: <[EMAIL PROTECTED]> [/home/kadmin] #whereis avcheck avcheck: /usr/ports/security/avcheck <[EMAIL PROTECTED]> [/home/kadmin] #cd /usr/ports/security/avcheck <[EMAIL PROTECTED]> [/usr/ports/security/avcheck] #more pkg-descr Avcheck is a simple program that allows you to call an antivirus software in order to check mail messages for viruses before actual delivery from within a Mail Transfer Agent, or MTA. Avcheck itself isn't a virusscanner, nor it is an MTA. It sits between the MTA and a real antivirus software. Most MTAs available today can call an external program for every mail message in order to perform various tasks, including virus scanning and content filtering. Avcheck can be used as that external program. Avcheck will receive a mail message from a mail system, pass it to an antivirus software, and, depending on the presence of a virus in that message, will either allow the message to be delivered or take appropriate actions to handle infected mail. Avcheck does nothing with a mail message contents -- it's task is to prepare file with a mail message and feed it to an antivirus progra. It's an antivirus task to decode MIME structure, handle embedded archives and so on. Many but not all antivirus products today have this ability. WWW: http://www.corpit.ru/avcheck/ - Well, still may not tell us much. ;) HTH, Kevin Kinsey ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: avcheck-0.9.tgz
In the last episode (Dec 08), RSB said: > 20031108 Las Vegas Nevada 89102 USA > [EMAIL PROTECTED] > > Subj: avcheck-0.9.tgz > > I ran a WINDOWS Mcafee VirusScan of the FreeBSD install disk (v 4.7) > included w/ the book 'SAMS Teach Yourself FreeBSD in 24 Hours' and it > identified a file on the CD, avcheck-0.9.tgz' as a virus. > > Can you provide any other information regarding this file? VirusScan should also have provided a description of the virus, which would have told you it was simply a test file for virus-scanner products. http://us.mcafee.com/virusInfo/default.asp?id=description&virus_k=98616 -- Dan Nelson [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Console resolution
On Mon, Dec 08, 2003 at 09:10:13PM +, Jez Hancock wrote: > Note you can test those settings out from the console using kbdcontrol. My bad - that should be 'vidcontrol' of course as someone else pointed out! -- Jez Hancock - System Administrator / PHP Developer http://munk.nu/ ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Strange behavior with scp
Hi, I just upgraded 2 machines to 4.9p1 and one of them is displaying a rather odd behavior. When I try to scp a file from said machine, it shows the first line of the fortune (the one you see if you, say, log into a shell on the machine) on the client end and then it quits. No error is reported in /var/log/messages or auth.log and no file is transferred. Has anyone seen this before? I tried using the same sshd_config as the working machine to no avail. Any suggestions would be greatly appreciated. Thanks, Sean. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
CVSUPIT pkg_add 90% good/10% strange
Hi - I've just installed 4.8 from scatch. The next thing I wanted to do was to CVSUP so I ... cd /usr/ports/net/cvsupit make install distclean ... that was a bit strange because cvsupit seemed to start automatically as part of the 'make'. I wasn't watching it happen but I flicked back to the screen and I found I was being prompted for which CVSUP server I wanted to use. Anyway I went along with that and allowed the CVSUP session to start and and all seemed to go well, I ended up with a "All finished! ... blah, blah" dialog box (not a real dialog I was running this from the command line). However when I then pressed Enter on that dialog box (to go back to the prompt) I get ... ===> Generating temporary packing list ** Missing package files for cvsupit-3.1. *** Error code 1 Stop in /usr/ports/net/cvsupit. ... that doesn't look too good and yet the CVSUP session appears to have all gone fine - can anyone explain what's happening ? regards richard shea. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: running freebsd with sendmail and qpopper
At 04:41 PM 12/8/2003, Steve Bertrand wrote: Send back the first few lines in the zone file. Appears as there is a syntax error. FreeB more /etc/namedb/face2interface.domain.zone $TTL 360 ; Default cached time to live for all records face2interface.domain.IN SOA ns.face2interface.domain. [EMAIL PROTECTED] ( 2003120801; Serial 172800 ; Refresh every 2 days 3600; Retry every hour 1728000 ; Expire every 20 days 172800 ); Minimum 2 days @ IN NS ns.face2interface.domain. ; Set the Mail Exchange record [etc] > FreeB ndc restart && tail -10 /var/log/messages | grep named > new pid is 336 > Dec 8 16:29:56 SwamiSalami named[327]: face2interface.domain.zone: WARNING > SOA expire value is less than SOA refresh+retry (2 < 2+600) > Dec 8 16:29:56 SwamiSalami named[327]: face2interface.domain.zone: WARNING > SOA expire value is less than refresh + 10 * retry (2 < (2 + 10 * 600)) > Dec 8 16:29:56 SwamiSalami named[327]: face2interface.domain.zone: WARNING > SOA expire value is less than 7 days (2) > Dec 8 16:29:56 SwamiSalami named[327]: face2interface.domain.zone: WARNING > SOA refresh value is less than 2 * retry (2 < 600 * 2) > Dec 8 16:29:56 SwamiSalami named[327]: face2interface.domain.zone:7: > Database error near () > Dec 8 16:29:56 SwamiSalami named[327]: face2interface.domain.zone:8: > Database error near () > Dec 8 16:29:56 SwamiSalami named[327]: face2interface.domain.zone:9: > Database error near () > Dec 8 16:29:56 SwamiSalami named[327]: face2interface.domain.zone:10: > Database error near ()) > Dec 8 16:29:56 SwamiSalami named[327]: master zone "face2interface.domain" > (IN) rejected due to errors (serial 0) > Dec 8 16:29:56 SwamiSalami named[336]: Ready to answer queries. > FreeB Marty Landman Face 2 Interface Inc 845-679-9387 Sign On Required: Web membership software for your site Make a Website: http://face2interface.com/Home/Demo.shtml ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Kernel message
What does this message mean??... No debugger in kernel Dec 8 17:40:05 bsd /kernel: No debugger in kernel I hope it isn't anything serious??? I haven't changed or altered anything in a long time. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: dump performance - 4.6-RELEASE #0
On Wed, Dec 03, 2003 at 06:03:50PM +1000, Kevin Fleming wrote: > > I've done numerous tests with dump and different buffer sizes etc, but the > maximum speed I can read from disk is approximately 14MB/s (measured by > iostat). > > cpio / tar etc can read from disk at over 30MB/s .. > > Dump seems to spawn children (presumably for better IO) - is it possible to > tweak the number of children for better IO performance. > > I can write to my tape unit at a sustained 25MB/s (AIT-3 on an LVD > interface), so I'm wasting tape and time. Kevin, try adding the following parameters -C 32 -b 60 to the dump command line. The 60 for the -b option was suggested to me by the dump maintainer. The 32 is 32 megabytes for the cache size. I have 256 MB of memory so I figured 32 was good for me. If you have more memory you might want to experiment with a higher cache size. Also make sure you RTFM the dump man page. I don't know if either parameter is in the release you are running. You might also want to consider piping the output of dump to dd and then to the tape. There has been plenty of discussions on many mailing lists about speeding up dump with dd. Marc -- Marc Wiz [EMAIL PROTECTED] Yes, that really is my last name. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: CVSUPIT pkg_add 90% good/10% strange
On Tue, 09 Dec 2003 11:39:13 +1300 "Richard Shea" <[EMAIL PROTECTED]> wrote: > Hi - I've just installed 4.8 from scatch. The next thing I wanted to > do was to CVSUP so I ... > > cd /usr/ports/net/cvsupit > make install distclean > > ... that was a bit strange because cvsupit seemed to start > automatically as part of the 'make'. I wasn't watching it happen but I > flicked back to the screen and I found I was being prompted for which > CVSUP server I wanted to use. > > Anyway I went along with that and allowed the CVSUP session to start > and and all seemed to go well, I ended up with a "All finished! ... > blah, blah" dialog box (not a real dialog I was running this from the > command line). > > However when I then pressed Enter on that dialog box (to go back to > the prompt) I get ... > > ===> Generating temporary packing list > ** Missing package files for cvsupit-3.1. > *** Error code 1 > > Stop in /usr/ports/net/cvsupit. > > ... that doesn't look too good and yet the CVSUP session appears to > have all gone fine - can anyone explain what's happening ? > > regards > > richard shea. No clue as to what's going wrong, sorry. But you should probably be using cvsup (or cvsup-without-gui), as IIRC cvsupit is obsolete. (It's not in my ports tree, anyway.) Probably the simplest way to install cvsup-without-gui on a fresh system is to use /stand/sysinstall -> Configure -> Packages. (You can also use the pkg_add command in the command line but I don't remember the invokation offhand.) -Chris ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: CVSUPIT pkg_add 90% good/10% strange
On Mon, 8 Dec 2003 14:53:33 -0800, "Chris Pressey" <[EMAIL PROTECTED]> said: > On Tue, 09 Dec 2003 11:39:13 +1300 > "Richard Shea" <[EMAIL PROTECTED]> wrote: > > > Hi - I've just installed 4.8 from scatch. The next thing I wanted to > > do was to CVSUP so I ... > > > > cd /usr/ports/net/cvsupit > > make install distclean > > > > ... that was a bit strange because cvsupit seemed to start > > automatically as part of the 'make'. I wasn't watching it happen but I > > flicked back to the screen and I found I was being prompted for which > > CVSUP server I wanted to use. > > > > Anyway I went along with that and allowed the CVSUP session to start > > and and all seemed to go well, I ended up with a "All finished! ... > > blah, blah" dialog box (not a real dialog I was running this from the > > command line). > > > > However when I then pressed Enter on that dialog box (to go back to > > the prompt) I get ... > > > > ===> Generating temporary packing list > > ** Missing package files for cvsupit-3.1. > > *** Error code 1 > > > > Stop in /usr/ports/net/cvsupit. > > > > ... that doesn't look too good and yet the CVSUP session appears to > > have all gone fine - can anyone explain what's happening ? > > > > regards > > > > richard shea. > > No clue as to what's going wrong, sorry. > > But you should probably be using cvsup (or cvsup-without-gui), as IIRC > cvsupit is obsolete. (It's not in my ports tree, anyway.) > Hmmm, OK ... I was working off ... http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/cvsup.html ... and re-reading that has answered part of my question ... If you do not know anything about CVSup at all and want a single package which will install it, set up the configuration file and start the transfer via a pointy-clicky type of interface, then get the net/cvsupit package. Just hand it to pkg_add(1) and it will lead you through the configuration process in a menu-oriented fashion. ... don't know if the doco is out of date ? I may use something else in the future as you suggest but what I'm interested in initially is does this message ... ===> Generating temporary packing list ** Missing package files for cvsupit-3.1. *** Error code 1 ... mean the machine is in a good state or a bad state (.. ah, the eternal question :-) thanks richard ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Strange behavior with scp
Sean Page wrote: Hi, I just upgraded 2 machines to 4.9p1 and one of them is displaying a rather odd behavior. When I try to scp a file from said machine, it shows the first line of the fortune (the one you see if you, say, log into a shell on the machine) on the client end and then it quits. No error is reported in /var/log/messages or auth.log and no file is transferred. Has anyone seen this before? I tried using the same sshd_config as the working machine to no avail. Any suggestions would be greatly appreciated. Thanks, Sean. This is happening because fortune is hijacking the tty. edit your shell init program to not run fortune on non-interactive shells, or remove it all together and scp should work fine again. ~j -- "Yesterday upon the stair I saw a man who wasn't there, he wasn't there again today, oh how i wish he'd go away" Rev. Jonathan T. Sage Lighting / Set Designer Professional Web Design [HTTP://theatre.msu.edu] [EMAIL PROTECTED] [See Headers for Contact Info] pgp0.pgp Description: PGP signature
Re: Strange behavior with scp
On Dec 8, 2003, at 5:09 PM, Sean Page wrote: When I try to scp a file from said machine, it shows the first line of the fortune (the one you see if you, say, log into a shell on the machine) on the client end and then it quits. No error is reported in /var/log/messages or auth.log and no file is transferred. scp requires a "clean login", and that message might be causing the SSH protocol used by scp to break. In particular, something like: "ssh _machine_ true" should run /bin/true and return without generating any additional output. Depending on the shell you use, wrapping the invocation of fortune in something like: if ($?prompt) then # interactive CSH commands... endif ...or: case $- in *i*) # interactive SH commands. esac ...should resolve this issue. -- -Chuck ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Routing problem
You're right, I didn't explain thoroughly. The FreeBSD gateway can reach the internet. The cable modem and gateway addresses are assigned by the ISP. My rc.conf: ifconfig_rl0=DHCP ifconfig_de0="inet 10.0.0.1 netmask 255.255.255.0" gateway_enable="YES" ... Thank you. -- Best Regards, Joshua Lokken From: Clayton F <[EMAIL PROTECTED]> To: "joshua lokken" <[EMAIL PROTECTED]> CC: [EMAIL PROTECTED] Subject: Re: Routing problem Date: Mon, 8 Dec 2003 12:52:47 -0800 This setup appears a little confusing. Does your ISP give you a static or dynamic IP address to the internet? It would also help to see the interface configuration info in your rc.conf file. generally speaking, your external interface should have the ip address assigned by your isp, not a private network address like you describe. You should also have a valid address to a dns server, rather than being referred to your dsl modem's private ip address. #my rc.conf (cable modem, with ip dynamically assigned - I'm using 192.168.1.0 as my private network range) gateway_enable="YES" defaultrouter="192.168.1.1" network_interfaces="fxp0 dc0 lo0" hostname="vesta.bitheaven.net" ifconfig_fxp0="DHCP" ifconfig_dc0="inet 192.168.1.1 netmask 255.255.255.0" If this doesn't help, send more info On Dec 8, 2003, at 12:22 PM, joshua lokken wrote: Hello, Running 4.9-stable. Here is a brief overview of the network I'm setting up. ***Internet*** | DSL modem (192.168.1.1, netmask 255.255.255.252, assigned by ISP) | FreeBSD gateway external (192.168.1.2, netmask 255.255.255.252, assigned by ISP) | FreeBSD gateway internal (10.0.0.1, netmask 255.255.255.0) | LAN (clients, 10.0.0.x, netmask 255.255.255.0) LAN clients can access boh gateway interfaces by hostname and IP. Clients are setup to use 192.168.1.2 for DNS, and 192.168.1.2 uses 192.168.1.1 for DNS. I cannot get any traffic to reach (let alone pass) the DSL modem from the clients. I have tried this with the FreeBSD gateway, a Win2k gateway, and Linksys router. Under any setup, the result is the same. My ISP's support desk has been absolutely no help. Can anyone tell what the problem may be here? Thanks in advance for any help. -- Best Regards, Joshua Lokken _ Wonder if the latest virus has gotten to your computer? Find out. Run the FREE McAfee online computer scan! http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963 ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]" _ Cell phone switch rules are taking effect find out more here. http://special.msn.com/msnbc/consumeradvocate.armx ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
RE: Strange behavior with scp
HA! That was it! Thanks Jonathan. Sean. -Original Message- From: Jonathan T. Sage [mailto:[EMAIL PROTECTED] Sent: December 8, 2003 4:02 PM To: '[EMAIL PROTECTED]' Subject: Re: Strange behavior with scp Sean Page wrote: > Hi, > > I just upgraded 2 machines to 4.9p1 and one of them is displaying a rather > odd behavior. > When I try to scp a file from said machine, it shows the first line of the > fortune (the one you see if you, say, log into a shell on the machine) on > the client end and then it quits. No error is reported in /var/log/messages > or auth.log and no file is transferred. > Has anyone seen this before? I tried using the same sshd_config as the > working machine to no avail. > Any suggestions would be greatly appreciated. > > Thanks, > Sean. > This is happening because fortune is hijacking the tty. edit your shell init program to not run fortune on non-interactive shells, or remove it all together and scp should work fine again. ~j -- "Yesterday upon the stair I saw a man who wasn't there, he wasn't there again today, oh how i wish he'd go away" Rev. Jonathan T. Sage Lighting / Set Designer Professional Web Design [HTTP://theatre.msu.edu] [EMAIL PROTECTED] [See Headers for Contact Info] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: CVSUPIT pkg_add 90% good/10% strange
On Tue, Dec 09, 2003 at 12:00:15PM +1300, Richard Shea wrote: > Hmmm, OK ... I was working off ... > > http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/cvsup.html > > ... and re-reading that has answered part of my question ... > > > If you do not know anything about CVSup at all and want a single package > which will install it, set up the configuration file and start the > transfer via a pointy-clicky type of interface, then get the net/cvsupit > package. Just hand it to pkg_add(1) and it will lead you through the > configuration process in a menu-oriented fashion. > > > ... don't know if the doco is out of date ? Apparently. cvsupit was removed from the ports collection about 6 months ago because it was broken for months and no-one came forward with a fix. Kris pgp0.pgp Description: PGP signature
Re: Evolution can't be installed after a deinstall
On Wed, 2003-12-03 at 01:44, Joe Marcus Clarke wrote: > On Tue, 2003-12-02 at 19:39, Joachim Dagerot wrote: > > My Evolution installation stopped working so I decided to go down the > > ol' windows way and made a deinstall with intention to de a new > > install. Unfortunately the "make install" command results in errors, I > > have posted from where the first error occurs, please let me know if > > all the output is needed. My question is very simple: What steps are > > needed to be able to install Evolution again, and is it possible to > > get an answer out of this "make install" output? > > Delete /usr/X11R6/include/gal. Took a lifetime, but now it works. Thanks alot for sharing your knowledge! ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Why userland , basesystem and Kernel are together?!
Hi Everybody , it's not easy to jump from one operating system to other one , sometimes people can have too much habit and it's searching same ones in other , for good understanding it is asking why ?! :) I want to ask why userland , base-system and Kernel are together ?! What is the meaning of this . I mean sync. all source and start to build new system from the beginning is to hard , it takes too much time and can have some risk .I don't understand How ISP can use FreeBSD because at the building time , machine will be off. Okey Maybe yahoo can use it because it's clustered environment and it's easyly remove one of the machine install new version or patch it if any problem occur it can be reinstalled after that making standart configuration now it's ready. I think that Kernel must be seperate of userland because it's managing and controling processes and I don't need rebuild kernel too much if I have no problem with device driver or if I don't need to add something to kernel for support ( instead of Firewall or like important things ) . Why some programs are in base system . What is the meaning of Sendmail or SSH in base system . Programs are only executable things What is the relation about those programs with base system ?! in list Some members said that I can patch a system with watching Security Advisories but same people said that " Sometimes it'wont and I have to do full kernel / world / build / plus install and reboot " Why ? What is the problem ?! Which list I have to watch for which Relese will have production quality ?!! ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: CVSUPIT pkg_add 90% good/10% strange
On Tue, 09 Dec 2003 12:00:15 +1300 "Richard Shea" <[EMAIL PROTECTED]> wrote: > On Mon, 8 Dec 2003 14:53:33 -0800, "Chris Pressey" > <[EMAIL PROTECTED]> said: > > On Tue, 09 Dec 2003 11:39:13 +1300 > > "Richard Shea" <[EMAIL PROTECTED]> wrote: > > > > > [of cvsupit weirdness] > > > > No clue as to what's going wrong, sorry. > > > > But you should probably be using cvsup (or cvsup-without-gui), as > > IIRC cvsupit is obsolete. (It's not in my ports tree, anyway.) > > > Hmmm, OK ... I was working off ... > > http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/cvsup.html > > ... and re-reading that has answered part of my question ... > > > If you do not know anything about CVSup at all and want a single > package which will install it, set up the configuration file and start > the transfer via a pointy-clicky type of interface, then get the > net/cvsupit package. Just hand it to pkg_add(1) and it will lead you > through the configuration process in a menu-oriented fashion. > > > ... don't know if the doco is out of date ? Looks like it. According to the CVS logs, cvsupit was removed on May 6 of this year: http://www.freebsd.org/cgi/cvsweb.cgi/ports/net/cvsupit/Attic/ > I may use something else > in the future as you suggest but what I'm interested in initially is > does this message ... > > ===> Generating temporary packing list > ** Missing package files for cvsupit-3.1. > *** Error code 1 > > ... mean the machine is in a good state or a bad state (.. ah, the > eternal question :-) Hm, I would say a bad state, but not *very* bad. Looks like cvsupit is partially installed? You might be able to fix it up by running pkg_delete cvsupit-3.1 which should delete any files that were installed by the cvsupit package (and possibly give you some warnings when trying to delete ones that weren't.) -Chris ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
pkg_info: read_plist: bad command '@conflicts acroread-3*'
Hail, pkg_info bombs on 4.8-RELEASE: [512]->pkg_info Mesa-3.2.1_1A graphics library similar to SGI's OpenGL ORBit-0.5.17_1 High-performance CORBA ORB with support for the C language WordNet-1.7.1 Dictionaries and thesauri with devel. libraries (C, TCL) an XFree86-4.3.0,1 X11/XFree86 core distribution (complete, using mini/meta-po XFree86-FontServer-4.3.0_2 XFree86-4 font server XFree86-Server-4.3.0_12 XFree86-4 X server and related programs XFree86-clients-4.3.0_5 XFree86-4 client programs and related files XFree86-documents-4.3.0 XFree86-4 documentation XFree86-font100dpi-4.3.0 XFree86-4 bitmap 100 dpi fonts XFree86-font75dpi-4.3.0 XFree86-4 bitmap 75 dpi fonts XFree86-fontCyrillic-4.3.0 XFree86-4 Cyrillic fonts XFree86-fontEncodings-4.3.0 XFree86-4 font encoding files XFree86-fontScalable-4.3.0 XFree86-4 scalable fonts XFree86-libraries-4.3.0_6 XFree86-4 libraries and headers Xaw3d-1.5 A 3-D Athena Widget set that looks like Motif Xft-2.1.2 A client-sided font API for X applications aalib-1.4.r5_1 An ascii art library pkg_info: read_plist: bad command '@conflicts acroread-3*' Anyone got a clue why this is happening? Should I pkg_delete acroread-3 and reinstall? I googled this one with no luck. I'm trying to resolve some nasty problem with teTeX and dvips which were working beautifully before I did a portupgrade -arR :-( I need to know exactly which versions of things are installed before removing them. I'm trying stuff like this: [514]->pkg_delete dvips pkg_delete: no such package 'dvips' installed [515]->pkg_delete dvips-5.76 pkg_delete: package 'dvips-5.76' doesn't have a prefix [516]->pkg_delete print/dvips-5.76 pkg_delete: package 'dvips-5.76' doesn't have a prefix (I'm trying to get dvips-5.92b working without error, which is why I want to remove dvips-5.76). Thanks, David. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Hard drive geometry headache (slightly off topic)
Hello! I have a problem which i cannot seem to fix no matter what I do! I have a 120GB disk, which had windows XP/FreeBSD partions working fine on one computer. Now I had to move it to a new computer in which the bios detects a certian geometry, but then the system wont boot. No matter what I do now, i cant get the system to boot off the disk, i have even tried eraseing it with fdisk (freebsd and dos versions). Does anyone know how I can save it? I have tried everything and dont know where else to ask. Frederick ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Disklabel
Hi, I had a crash tonight. Server rebooted and everything seemed to restart OK. Interesting disklabel output though. Should I be worried about all the "*"s? : If this helps, the disk below is a 10,000 spin RAID 5 Dell Perc DC/L (3 Fujitu disks). enterprise# disklabel /dev/amrd0 # /dev/amrd0: type: SCSI disk: amnesiac label: fictitious flags: bytes/sector: 512 sectors/track: 63 tracks/cylinder: 255 sectors/cylinder: 16065 cylinders: 4405 sectors/unit: 70770688 rpm: 3600 interleave: 1 trackskew: 0 cylinderskew: 0 headswitch: 0 # milliseconds track-to-track seek: 0 # milliseconds drivedata: 0 8 partitions: #size offsetfstype [fsize bsize bps/cpg] c: 707706880unused0 0 # (Cyl.0 - 4405*) enterprise# enterprise# disklabel /dev/amrd0s1 # /dev/amrd0s1: type: ESDI disk: amrd0s1 label: flags: bytes/sector: 512 sectors/track: 63 tracks/cylinder: 255 sectors/cylinder: 16065 cylinders: 4404 sectors/unit: 70766262 rpm: 3600 interleave: 1 trackskew: 0 cylinderskew: 0 headswitch: 0 # milliseconds track-to-track seek: 0 # milliseconds drivedata: 0 8 partitions: #size offsetfstype [fsize bsize bps/cpg] a: 102400004.2BSD0 0 0 # (Cyl.0 - 63*) b: 2048000 1024000 swap# (Cyl. 63*- 191*) c: 707662620unused0 0 # (Cyl.0 - 4404*) d: 8142848 461291524.2BSD 1024 819216 # (Cyl. 2871*- 3378*) e: 1024 30720004.2BSD0 0 0 # (Cyl. 191*- 828*) f: 3072 133120004.2BSD0 0 0 # (Cyl. 828*- 2740*) g: 2097152 440320004.2BSD0 0 0 # (Cyl. 2740*- 2871*) h: 16494262 542720004.2BSD0 0 0 # (Cyl. 3378*- 4404*) enterprise# ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Hard drive geometry headache (slightly off topic)
> I have a problem which i cannot seem to fix no matter what I do! I have a > 120GB disk, which had windows XP/FreeBSD partions working fine on one > computer. Now I had to move it to a new computer in which the bios detects > a certian geometry, but then the system wont boot. No matter what I do > now, i cant get the system to boot off the disk, i have even tried > eraseing it with fdisk (freebsd and dos versions). Does anyone know how I > can save it? I have tried everything and dont know where else to ask. Check to see that the BIOS is using the same addressing mode as the old board. I had a somewhat similar problem and it turned out the BIOS was in Large mode. Switching to LBA solved the problem. Also, if you've fdisk'ed the drive, chances are you've hosed the installations. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Hard drive geometry headache (slightly off topic)
>> Now I had to move it to a new computer in which the bios >> detects a certian geometry, but then the system wont boot. >> No matter what I do now, i cant get the system to boot off >> the disk, i have even tried eraseing it with fdisk (freebsd >> and dos versions). Does anyone know how I can save it? >> I have tried everything and dont know where else to ask. > Check to see that the BIOS is using the same addressing mode as the old > board. I had a somewhat similar problem and it turned out the BIOS was in > Large mode. Switching to LBA solved the problem. Also, if you've fdisk'ed > the drive, chances are you've hosed the installations. I stopped caring about the data on the disk (which is backed up, so just an inconvenience. I have tried setting LBA/Large/CHS and booting and installing freebsd. Under each type, fdisk always reports that the geometry is incorect. Each time the install works fine but then when trying to boot, it cant read the hard disk! I am guessing freebsd works out the correct drive geometry, but the bios is not! Interestingly though, when set to LBA, the head/cyl/sector count is equal to what the freebsd fdisk detects it to be. (This is a new motherboard which works when booting/installing FreeBSD on an old 2G hd i have lying around) the problem is only with the 80G drive Fred ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Hard drive geometry headache (slightly off topic)
> I am guessing freebsd works out the correct drive geometry, but the bios > is not! Interestingly though, when set to LBA, the head/cyl/sector count > is equal to what the freebsd fdisk detects it to be. This is exactly what I was experiencing. Thought I'd throw that out there, best of luck to you. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Why userland , basesystem and Kernel are together?!
On Tuesday 09 December 2003 00:37, Vahric MUHTARYAN wrote: > Hi Everybody , > > it's not easy to jump from one operating system to other one , > sometimes people can have too much habit and it's searching same ones in > other , for good understanding it is asking why ?! :) Well, if you're talking about "operating systems" you answered your question yourself! > > I want to ask why userland , base-system and Kernel are together ?! > What is the meaning of this . I mean sync. all source and start to build > new system from the beginning is to hard , it takes too much time and can > have some risk .I don't understand How ISP can use FreeBSD because at the > building time , machine will be off. Okey Maybe yahoo can use it because What a nonsens! > it's clustered environment and it's easyly remove one of the machine > install new version or patch it if any problem occur it can be reinstalled > after that making standart configuration now it's ready. > > > I think that Kernel must be seperate of userland because it's managing You think? *lol* > and controling processes and I don't need rebuild kernel too much if I have > no problem with device driver or if I don't need to add something to > kernel for support ( instead of Firewall or like important things ) . > > > Why some programs are in base system . What is the meaning of Sendmail > or SSH in base system . Programs are only executable things What is the > relation about those programs with base system ?! > > >in list Some members said that I can patch a system with watching > Security Advisories but same people said that " Sometimes it'wont and I > have to do full kernel / world / build / plus install and reboot " Why ? > What is the problem ?! > > > Which list I have to watch for which Relese will have production > quality ?!! > > > > > > > > ___ > [EMAIL PROTECTED] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "[EMAIL PROTECTED]" pgp0.pgp Description: signature
Binary Upgrade Problems 4.3 ---> 4.9
I'm having trouble doing a binary upgrade from 4.3 to 4.9. Existing 4.3 was installed with 'all' distributions selected, and takes up about 636M on an old Pentium. When I tried the upgrade to 4.9 the first time (selecting 'all' again) the process bombed, and complained about unwillingness to upgrade /src, suggesting CTM or CVSup - which was fair enough, since this was supposed to be a 'binary' upgrade. (Does this always happen??) Re-installed 4.3 again and re-tried the upgrade - this time with all distributions chosen (except sources). Bombed out again, complaining about 'unable to extract stuff into /usr/X11R6 directory'. However, even with this outcome, the system seems to be working (almost) OK. Boots OK with 4.9 kernel and 'uname -a' shows Version 4.9. All of the files seem to be there (now takes up 822M), and all of the files I've checked have dates of Oct 27 (which I assume is when 4.9 was built). However, all of my old configuration files are still stuck in /usr/tmp/etc and have not been copied back into /etc - only 'new' unmodified versions of the files are there, also with dates of Oct 27. And, I assume, there are troubles in the X11R6 directory, since that's where it was when it bombed. So, it appears that the upgrade went almost to completion, but ran into trouble towards the end. Any suggestions?? I'm beginning to believe that binary upgrades are more trouble than a 'real' one - even though it 'appears' to be easier. Cal Cornils Napa Valley College Beautiful Napa Valley ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Why userland , basesystem and Kernel are together?!
> I want to ask why userland , base-system and Kernel are together ?! Because some userland programs make assumptions on internal kernel structures. Examples: top, fstat, fsck, ... And, most important: Every compiled application needs libc as a wrapper for system calls (which toggle all kinds of actions in the kernel). You can imagine what happens if your libc does not match your kernel version, and something really important changed. > What > is the meaning of this . I mean sync. all source and start to build new > system from the beginning is to hard , it takes too much time and can have > some risk .I don't understand How ISP can use FreeBSD because at the > building time , machine will be off. Okey Maybe yahoo can use it because > it's clustered environment and it's easyly remove one of the machine install > new version or patch it if any problem occur it can be reinstalled after > that making standart configuration now it's ready. You will find a test and build machine on almost any _professional_ installation (independently, if FreeBSD is used as OS). > I think that Kernel must be seperate of userland because it's managing > and controling processes and I don't need rebuild kernel too much if I have > no problem with device driver or if I don't need to add something to kernel > for support ( instead of Firewall or like important things ) . > > > Why some programs are in base system . What is the meaning of Sendmail > or SSH in base system . Programs are only executable things What is the > relation about those programs with base system ?! Because FreeBSD is more than a kernel, but a full Operating System, and as therefore it needs software for basic services like email, remote login, ... > > >in list Some members said that I can patch a system with watching > Security Advisories but same people said that " Sometimes it'wont and I have > to do full kernel / world / build / plus install and reboot " Why ? What > is the problem ?! Of course, you can perform an update for a userland application in FreeBSD without a reboot. The benefit of tracking one of the security branches and doing the full buildworld procedure is, that you are using a well-defined snapshot of the FreeBSD source repository. When you see a security advisory, and you update to the latest security release, you can be sure, that your system will still work afterwards (a.k.a QA provided by the FreeBSD security team). If you don't want to track that branch, there are still the pointers to patches that apply against supported releases. Due to the lack of man power, older versions of FreeBSD cannot be supported for eternity. And if you dislike the idea of keeping your sources up-to-date, there is also a binary security update mechanism: ports/security/freebsd-update > > Which list I have to watch for which Relese will have production quality > ?!! At the present, you should install FreeBSD 4.9 and either update to the latest security release _or_ use the freebsd-update port. Once you use the source method, you will not be able to use the binary updates since the patches won't probably apply. Regards, Simon signature.asc Description: Digital signature
SoundBlaster Awe 32
ok. I have tried the module and the kernel method, both to no avail. When I put "device pcm" and "device sbc" in the config file and recompile I get nothing. I have tried it with both, and with only the pcm. There is no pcm device showing up on reboot. Is there something I am missing? Thanks for the help. -mark smime.p7s Description: S/MIME Cryptographic Signature
a technical how to
So, I hope this is the right address for this type of question. If not would you please forward this and/or let me know the correct address. Thanks, Here is the question: How to truncate a file from the begining to a certain point in the file? __ Do you Yahoo!? New Yahoo! Photos - easier uploading and sharing. http://photos.yahoo.com/ ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Binary Upgrade Problems 4.3 ---> 4.9
On Mon, 8 Dec 2003 16:44:19 -0800, Cal Cornils wrote: >I'm having trouble doing a binary upgrade from 4.3 to 4.9. > >Existing 4.3 was installed with 'all' distributions selected, and takes up >about 636M on an old Pentium. > >When I tried the upgrade to 4.9 the first time (selecting 'all' again) the >process bombed, and complained about unwillingness to upgrade /src, >suggesting CTM or CVSup - which was fair enough, since this was supposed to >be a 'binary' upgrade. (Does this always happen??) > >Re-installed 4.3 again and re-tried the upgrade - this time with all >distributions chosen (except sources). Bombed out again, complaining about >'unable to extract stuff into /usr/X11R6 directory'. However, even with >this outcome, the system seems to be working (almost) OK. Boots OK with 4.9 >kernel and 'uname -a' shows Version 4.9. All of the files seem to be there >(now takes up 822M), and all of the files I've checked have dates of Oct 27 >(which I assume is when 4.9 was built). > >However, all of my old configuration files are still stuck in /usr/tmp/etc >and have not been copied back into /etc - only 'new' unmodified versions of >the files are there, also with dates of Oct 27. And, I assume, there are >troubles in the X11R6 directory, since that's where it was when it bombed. > >So, it appears that the upgrade went almost to completion, but ran into >trouble towards the end. > >Any suggestions?? I'm beginning to believe that binary upgrades are more >trouble than a 'real' one - even though it 'appears' to be easier. to be honest with you, I've _never_ had good luck with binary upgrade. I've never got one to work. If you can, patch everything up, install cvsup, and follow the "build world" tuturiol on the main website (www.freebsd.org). It will take a little time on an old pentium to recompile the SRC, but on my K6-450, I can build the entire 5.1 src in under a few hrs (like 2-3), the 4.x series is a lot faster. --- doug reynolds | the maverick | [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Accessing DOCSIS diagnostics from within/behind FreeBSD router
"J. Seth Henry" <[EMAIL PROTECTED]> writes: > I'm not sure if this is even a FreeBSD question, but googling hasn't turned up > much on it, so I thought I'd toss this one out there. > > I have a Motorola SB5100 cable modem directly attached to a FreeBSD router > (running ipfilters/ipnat). The external network is a comcast segment, and is > assigned a dynamic IP. The internal network is routed on 192.168.1.x, where > the router is 192.168.1.254. > > The trick is, the cable modem is on the "external" side, but apparently > listening on 192.168.1.100 for HTTP requests (for its diagnostics report). > > Is there anyway to access this diagnostic page without temporarily plugging > the CM into a Windows box? The most obvious answer would be to change the internal network to not conflict with the external network. With a little more effort, you could set up the FreeBSD box to bridge instead of routing, and just make sure you don't assign the .100 address to anything other than the cable modem. -- Lowell Gilbert, embedded/networking software engineer, Boston area: resume/CV at http://be-well.ilk.org:8088/~lowell/resume/ username/password "public" ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: SoundBlaster Awe 32
Mark Cole wrote: ok. I have tried the module and the kernel method, both to no avail. When I put "device pcm" and "device sbc" in the config file and recompile I get nothing. I have tried it with both, and with only the pcm. There is no pcm device showing up on reboot. Is there something I am missing? Thanks for the help. -mark Read this : http://www.onlamp.com/pub/a/bsd/2002/09/05/FreeBSD_Basics.html Then this : http://www.onlamp.com/pub/a/bsd/2002/09/19/FreeBSD_Basics.html This should get you started, as it did for me :-) Marc ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: a technical how to
On Tuesday 09 December 2003 02:51, homeyra g wrote: > So, I hope this is the right address for this type of > question. If not would you please forward this and/or > let me know the correct address. > > Thanks, > > Here is the question: How to truncate a file from the > begining to a certain point in the file? Have a look at sed. Sorry can't help with syntax and I'm sure one can also do the same with perl or awk or whatever. But for the first, man (1) sed will help with 'cat yourfile | sed -youroptions' e.g. You can also use vi (if it's a regular textfile with less than hundreds of megs), find your endpoint with e.g "/YourEndKeyWord" and do in instruction mode a "dG", after that save. -Harry > > > __ > Do you Yahoo!? > New Yahoo! Photos - easier uploading and sharing. > http://photos.yahoo.com/ > ___ > [EMAIL PROTECTED] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "[EMAIL PROTECTED]" pgp0.pgp Description: signature
Re: CVSUPIT pkg_add 90% good/10% strange
On Mon, 8 Dec 2003 15:40:39 -0800, "Chris Pressey" <[EMAIL PROTECTED]> said: > On Tue, 09 Dec 2003 12:00:15 +1300 > "Richard Shea" <[EMAIL PROTECTED]> wrote: > > > On Mon, 8 Dec 2003 14:53:33 -0800, "Chris Pressey" > > <[EMAIL PROTECTED]> said: > > > On Tue, 09 Dec 2003 11:39:13 +1300 > > > "Richard Shea" <[EMAIL PROTECTED]> wrote: > > > > > > > [of cvsupit weirdness] > > > > > > No clue as to what's going wrong, sorry. > > > > > > But you should probably be using cvsup (or cvsup-without-gui), as > > > IIRC cvsupit is obsolete. (It's not in my ports tree, anyway.) > > > > > Hmmm, OK ... I was working off ... > > > > http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/cvsup.html > > > > ... and re-reading that has answered part of my question ... > > > > > > If you do not know anything about CVSup at all and want a single > > package which will install it, set up the configuration file and start > > the transfer via a pointy-clicky type of interface, then get the > > net/cvsupit package. Just hand it to pkg_add(1) and it will lead you > > through the configuration process in a menu-oriented fashion. > > > > > > ... don't know if the doco is out of date ? > > Looks like it. According to the CVS logs, cvsupit was removed on May 6 > of this year: > > http://www.freebsd.org/cgi/cvsweb.cgi/ports/net/cvsupit/Attic/ > > > I may use something else > > in the future as you suggest but what I'm interested in initially is > > does this message ... > > > > ===> Generating temporary packing list > > ** Missing package files for cvsupit-3.1. > > *** Error code 1 > > > > ... mean the machine is in a good state or a bad state (.. ah, the > > eternal question :-) > > Hm, I would say a bad state, but not *very* bad. Looks like cvsupit is > partially installed? You might be able to fix it up by running > > pkg_delete cvsupit-3.1 > > which should delete any files that were installed by the cvsupit > package (and possibly give you some warnings when trying to delete ones > that weren't.) > That's a good idea, I hadn't thought of it. However strange stuff persists because when I tried that I got ... trinidad# pkg_delete cvsupit-3.1 pkg_delete: no such package 'cvsupit-3.1' installed ... - that's even though it just ran ! I then started looking in to the relevant ports directory and this is what I saw ... trinidad# pwd /usr/ports/net/cvsupit trinidad# ls work trinidad# cd work trinidad# ls -l total 0 -rw-r--r-- 1 root wheel 0 Dec 7 22:59 .build_done.cvsupit-3.1 -rw-r--r-- 1 root wheel 0 Dec 7 22:59 .configure_done.cvsupit-3.1 -rw-r--r-- 1 root wheel 0 Dec 7 22:59 .extract_done.cvsupit-3.1 -rw-r--r-- 1 root wheel 0 Dec 7 22:59 .patch_done.cvsupit-3.1 trinidad# ... I take it those files are used as a form of logging ? So on the one hand it's 'build_done' but on the other hand pkg_delete doesn't know about the package ! Just did a ... trinidad# find / -name "*vsupi*" -print ... and didn't find anything elsewhere in the system either ... All in all a bit of a mystery - anyone else fancy having a go at explaining what might have happened or what it all means ;-) regards richard. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
linux compatibility
Hi guys, My probs is I wanna add flash plugins to my mozilla, buat the default ports frebsd gave is an old one and it always make my mozilla hang if I open a web page. I tried to use the linux-flashplugin and ln -s *.so thing but it alway complain abaout it cannot found the library needed. I read in the handbook that FreeBSD will taking care wich linux libary will be use and where. But from my experience it alway cannot be found but its there alright. Did I make any mistake what im doing? Thanx danu __ Do you Yahoo!? Free Pop-Up Blocker - Get it now http://companion.yahoo.com/ ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Routing problem
From which interface? Try these: ping google.com (that will ping using the external interface) ping -S 10.0.0.1 google.com (that will ping using the internal interface) If one works, but not the other, post your firewall rules and natd command line. Hello, The FreeBSD machine is simply passing traffice for the time being, no ipfw, no NAT. I know the name, ut not much mre about the DSL modem I was given.It's an ARESCOM800, and the service is **wince** MSN DSL. The modem has a very simple html display that gives me the very basics; modem IP (192.168.1.1), netmask (255.255.255.252) and external IP. rl0 is the modem-facing interface (external) on a FreeBSD 4.9 "gateway". de0 is the LAN-facing (internal) interface on the same machine. /etc/rc.conf says: ifconfig_rl0="DHCP" ifconfig_de0="inet 10.0.0.1 netmask 255.255.255.0" gateway_enable="YES" defaultrouter="192.168.1.1" I can reach the outside world from both intrefaces on the gateway. rl0 is configured thusly (automatically via DHCP): inet 192.168.1.2 netmask 255.255.255.252, with a default gateway of 192.168.1.1. Clients are configured as follows: inet 10.0.0.x netmask 255.255.255.0 defaultrouter 10.0.0.1 From a client machine on the 10.0.0.0 network, I can ping both de0 and rl0 on the gateway, but I cannot get any traffic past rl0 to the cable modem from the LAN client. That is where my minimal understanding of routing ends. I do not know why I cannot pass traffic to the modem and out. I hope this makes my problem clearer, thanks for the help. After following up on the above reply, I find that I cannot ping out from the LAN interface (de0, 10.0.0.1). Hmmm, and again, no ipfw or NAT on the FreeBSD firewall. Joshua _ Browse styles for all ages, from the latest looks to cozy weekend wear at MSN Shopping. And check out the beauty products! http://shopping.msn.com ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"