Re: FreeBSD 5.0 installation, boot: fatal trap 12
Hi! Thank you very much for this hint with ACPI! In fact, "set hint.acpi.0.disabled=1" did not work, but I figured out to try acpi_load=disable and kernel did not panic! So, seems either problem with an ACPI driver in FreeBSD 5.0 or broken BIOS. --- Lord Sith <[EMAIL PROTECTED]> wrote: > Have you tried booting without ACPI? > > I've had all sorts of problems with FreeBSD's ACPI. > In fact, I have yet to > install it on a box that it doesn't panic, hang or > break something. > > To do this, interrupt the kernel countdown and then > do this: > > set hint.acpi.0.disabled=1 > boot > > >From: Oleksandr Konovalenko > <[EMAIL PROTECTED]> > >To: [EMAIL PROTECTED] > >Subject: FreeBSD 5.0 installation, boot: fatal trap > 12 > >Date: Thu, 6 Feb 2003 04:01:33 -0800 (PST) > >Hi! > > > > During the installation (from CD, I've tried both > >mini-disc and disc1) of FreeBSD 5.0 on my laptop > >Packard Bell iGO2451 (AMD AthlonXP +1500, 1.3GHz) > I've > >got following: > > > >... > >cardbus0: on cbb0 > >pccard0: <16 bit PCCard bus> on vbb0 > > > > > >Fatal trap 12: page fault while in kernel mode > > > >fault virtual address = 0xe7fe6 > >fault code = supervisor read, page not > >present > >instruction pointer= 0x8:0xc00e9eb5 > >stack pointer = 0x10:0xc0a8299c > >frame pointer = 0x10:0xc0a8299c > >code segment = base 0x0, limit 0xf, > type > >0x16 > >= DPL 0, pres 1, def32 1, > gran > >1 > >processor eflags = interrupt enabled, resume, > >IOPL = 0 > >current process= 0 (swapper) > >trap number= 12 > >panic: page fault > >uptime 1s > >- > > > >Note#1, there is only one PCMCIA slot in laptop and > it > >was empty during the boot. > > > >Note#2, there is no internal floppy drive. > > > >Note#3, No any problem to install NetBSD 1.5.2 or > >Linux RH 7.3 with 2.4.20 kernel. > > > >Note#4, I tried to disable some devices in BIOS but > it > >did not help. > > > >Question: what might be wrong? > > > >regards, > > Alexander K. > > > > > > PS: Hardware specifications (from > >http://www.packardbell.se/support/node485.asp): > > > >BIOS v. 1.02 > > > >PC Card Texas Instruments PCI-4410 PC Card > >Controller > >32 bit PC-Card Bus > > > >Video S3 Savage 4S Video Controller > >High-Performance 2D/3D Video Accelerator, > integrated > >in mainboard. > > > >Sound Realtek ALC201 Audio System > >18-bit, full duplex AC'97 2.2 compatible stereo > audio > >CODEC. > > > >Core VIA Apollo KN133 chipset > >200/266 MHz Front Side Bus, Savage4 AGP 4X > graphics > >core. > > > >Display LCD 14.1'' TFT XGA > >LCD 14.1" TFT XGA > > > >Keyboard and pointing device Synaptics Touchpad > >Touch-sensitive control pad. > > > >4-Way Scrolling Button > >Multi-directional scrolling function > > > >KME UJDA730 Combo Drive > >One drive which can read, write and re-write CD's > but > >also reads DVD's. 8x DVD, 8x Write, 4x ReWrite, 20x > >Read. > > > >Memory Memory iGo 2000 series > > * 1 SO-DIMM Slot > > * Size: 256 MB > > * Type: SDRAM (PC133) > > > > > >Modem Billionton MDC56S-I Modem > >V92 MDC interface modem (Smartlink chipset ref. > >HAMR5600-INT) > > > >Network LSI L80227 Network Controller > >100/10 Base T Ethernet integrated in VIA VT8231 > > > > > > > > > >__ > >Do you Yahoo!? > >Yahoo! Mail Plus - Powerful. Affordable. Sign up > now. > >http://mailplus.yahoo.com > > > >To Unsubscribe: send mail to [EMAIL PROTECTED] > >with "unsubscribe freebsd-questions" in the body of > the message > > > _ > Add photos to your messages with MSN 8. Get 2 months > FREE*. > http://join.msn.com/?page=features/featuredemail > __ Do you Yahoo!? Yahoo! Mail Plus - Powerful. Affordable. Sign up now. http://mailplus.yahoo.com To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-questions" in the body of the message
Re: FreeBSD 5.0 installation, boot: fatal trap 12
> set hint.acpi.0.disabled=1 > boot I tried this, but got same error :-( --- Lord Sith <[EMAIL PROTECTED]> wrote: > Have you tried booting without ACPI? > > I've had all sorts of problems with FreeBSD's ACPI. > In fact, I have yet to > install it on a box that it doesn't panic, hang or > break something. > > To do this, interrupt the kernel countdown and then > do this: > > set hint.acpi.0.disabled=1 > boot > > >From: Oleksandr Konovalenko > <[EMAIL PROTECTED]> > >To: [EMAIL PROTECTED] > >Subject: FreeBSD 5.0 installation, boot: fatal trap > 12 > >Date: Thu, 6 Feb 2003 04:01:33 -0800 (PST) > >Hi! > > > > During the installation (from CD, I've tried both > >mini-disc and disc1) of FreeBSD 5.0 on my laptop > >Packard Bell iGO2451 (AMD AthlonXP +1500, 1.3GHz) > I've > >got following: > > > >... > >cardbus0: on cbb0 > >pccard0: <16 bit PCCard bus> on vbb0 > > > > > >Fatal trap 12: page fault while in kernel mode > > > >fault virtual address = 0xe7fe6 > >fault code = supervisor read, page not > >present > >instruction pointer= 0x8:0xc00e9eb5 > >stack pointer = 0x10:0xc0a8299c > >frame pointer = 0x10:0xc0a8299c > >code segment = base 0x0, limit 0xf, > type > >0x16 > >= DPL 0, pres 1, def32 1, > gran > >1 > >processor eflags = interrupt enabled, resume, > >IOPL = 0 > >current process= 0 (swapper) > >trap number= 12 > >panic: page fault > >uptime 1s > >- > > > >Note#1, there is only one PCMCIA slot in laptop and > it > >was empty during the boot. > > > >Note#2, there is no internal floppy drive. > > > >Note#3, No any problem to install NetBSD 1.5.2 or > >Linux RH 7.3 with 2.4.20 kernel. > > > >Note#4, I tried to disable some devices in BIOS but > it > >did not help. > > > >Question: what might be wrong? > > > >regards, > > Alexander K. > > > > > > PS: Hardware specifications (from > >http://www.packardbell.se/support/node485.asp): > > > >BIOS v. 1.02 > > > >PC Card Texas Instruments PCI-4410 PC Card > >Controller > >32 bit PC-Card Bus > > > >Video S3 Savage 4S Video Controller > >High-Performance 2D/3D Video Accelerator, > integrated > >in mainboard. > > > >Sound Realtek ALC201 Audio System > >18-bit, full duplex AC'97 2.2 compatible stereo > audio > >CODEC. > > > >Core VIA Apollo KN133 chipset > >200/266 MHz Front Side Bus, Savage4 AGP 4X > graphics > >core. > > > >Display LCD 14.1'' TFT XGA > >LCD 14.1" TFT XGA > > > >Keyboard and pointing device Synaptics Touchpad > >Touch-sensitive control pad. > > > >4-Way Scrolling Button > >Multi-directional scrolling function > > > >KME UJDA730 Combo Drive > >One drive which can read, write and re-write CD's > but > >also reads DVD's. 8x DVD, 8x Write, 4x ReWrite, 20x > >Read. > > > >Memory Memory iGo 2000 series > > * 1 SO-DIMM Slot > > * Size: 256 MB > > * Type: SDRAM (PC133) > > > > > >Modem Billionton MDC56S-I Modem > >V92 MDC interface modem (Smartlink chipset ref. > >HAMR5600-INT) > > > >Network LSI L80227 Network Controller > >100/10 Base T Ethernet integrated in VIA VT8231 > > > > > > > > > >__ > >Do you Yahoo!? > >Yahoo! Mail Plus - Powerful. Affordable. Sign up > now. > >http://mailplus.yahoo.com > > > >To Unsubscribe: send mail to [EMAIL PROTECTED] > >with "unsubscribe freebsd-questions" in the body of > the message > > > _ > Add photos to your messages with MSN 8. Get 2 months > FREE*. > http://join.msn.com/?page=features/featuredemail > __ Do you Yahoo!? Yahoo! Mail Plus - Powerful. Affordable. Sign up now. http://mailplus.yahoo.com To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-questions" in the body of the message
FreeBSD 5.0 installation, boot: fatal trap 12
Hi! During the installation (from CD, I've tried both mini-disc and disc1) of FreeBSD 5.0 on my laptop Packard Bell iGO2451 (AMD AthlonXP +1500, 1.3GHz) I've got following: ... cardbus0: on cbb0 pccard0: <16 bit PCCard bus> on vbb0 Fatal trap 12: page fault while in kernel mode fault virtual address = 0xe7fe6 fault code = supervisor read, page not present instruction pointer= 0x8:0xc00e9eb5 stack pointer = 0x10:0xc0a8299c frame pointer = 0x10:0xc0a8299c code segment = base 0x0, limit 0xf, type 0x16 = DPL 0, pres 1, def32 1, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process= 0 (swapper) trap number= 12 panic: page fault uptime 1s - Note#1, there is only one PCMCIA slot in laptop and it was empty during the boot. Note#2, there is no internal floppy drive. Note#3, No any problem to install NetBSD 1.5.2 or Linux RH 7.3 with 2.4.20 kernel. Note#4, I tried to disable some devices in BIOS but it did not help. Question: what might be wrong? regards, Alexander K. PS: Hardware specifications (from http://www.packardbell.se/support/node485.asp): BIOS v. 1.02 PC Card Texas Instruments PCI-4410 PC Card Controller 32 bit PC-Card Bus Video S3 Savage 4S Video Controller High-Performance 2D/3D Video Accelerator, integrated in mainboard. Sound Realtek ALC201 Audio System 18-bit, full duplex AC'97 2.2 compatible stereo audio CODEC. Core VIA Apollo KN133 chipset 200/266 MHz Front Side Bus, Savage4 AGP 4X graphics core. Display LCD 14.1'' TFT XGA LCD 14.1" TFT XGA Keyboard and pointing device Synaptics Touchpad Touch-sensitive control pad. 4-Way Scrolling Button Multi-directional scrolling function KME UJDA730 Combo Drive One drive which can read, write and re-write CD's but also reads DVD's. 8x DVD, 8x Write, 4x ReWrite, 20x Read. Memory Memory iGo 2000 series * 1 SO-DIMM Slot * Size: 256 MB * Type: SDRAM (PC133) Modem Billionton MDC56S-I Modem V92 MDC interface modem (Smartlink chipset ref. HAMR5600-INT) Network LSI L80227 Network Controller 100/10 Base T Ethernet integrated in VIA VT8231 __ Do you Yahoo!? Yahoo! Mail Plus - Powerful. Affordable. Sign up now. http://mailplus.yahoo.com To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-questions" in the body of the message
