Re: openvpn and tap device
On 29.05.2013 17:52, Pol Hallen wrote: It's a while since I looked at OpenVPN, so this is from unreliable memory, but IIRC it uses tap devices under Windows and tun devices under Unix(ish) OSes. Do you see tun0 appear? sorry for the mistake: tun device I don't have any tun devices but I can use openvpn to connect to other vpn client Do you start openvpn from console or have you a log- file for openvpn? There stand, what openvpn is doing and how it connect. Pol ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org" ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: Max top end computer for Freebsd to run on
On 02.06.2013 22:34, Fbsd8 wrote: I'm a sub second speed freak. What is the max number of cpu's and memory size that Freebsd can handle? Can it handle 16 4ghz cpu's and 32gb of memory? I need a gaming server with some really big balls for hundreds of jails. Money is not a deciding factor here, horse power is. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org" Looks like there is set up to 128 maxcpu (or no limit) since FBSD 9.0. http://forums.freebsd.org/showthread.php?t=13261 Memory i don't know. With 64Bit it should many ram avaible. Greeting ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: (no subject)
On 09/07/11 21:28, Mike Hix wrote: On Wed, Sep 7, 2011 at 7:43 AM, Selim wrote: hey could you please include broadcom bcm4313 drivers to freebsd9.0 i cant use freebsd just because of that driver.. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to " freebsd-questions-unsubscr...@freebsd.org" hey could you have a look at the man pages for bwn and bwi... When Adriane have time, he will work on it. http://lists.freebsd.org/pipermail/freebsd-wireless/2011-August/000448.html I don't know, if he had worked on it. Sorry for my english :( ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: Can't install WindowMaker
On 03/15/12 21:24, Sabine Baer wrote: I do not undestand exactly, what You mean. I did a cvsup -g -L 2 ports-supfile several times, I went to all /usr/ports/x11*/dirctories and made a 'make clean' for al the ports therein, but nothing helped. Sabine I see that you have a german mailadress, so i will write in germany. Guck mal nach, ob du unter /etc/ eine Datei mit dem Namen portsnap.conf hast. Wenn ja, bearbeitet die Datei einmal und ruf portsnap fetch portsnap extract auf. Damit werden alle Ports unter /usr/ports auf einen aktuellen Stand gebracht. Danach reicht eigentlich ein portsnap fetch portsnap update aus, um auf die letzten Ports zu kommen. Wenn du eine Flatrate hast, kannst du vielleicht auch mal dein ganzes System auf 9.0 aktualisieren (freebsd-update ist für die Standardinstallation ohne Kompilierung ganz gut). Einige Probleme treten auf, wenn die Libarys auf dem System zu alt sind, aber in den Ports aktuelle benötigt werden. mfg ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: openoffice doesn't work - any ideas?
On 05/19/12 13:24, User Wojtek wrote: [wojtek@wojtek ~/robod]$ openoffice-3.4.0 [Java framework] Error in function createSettingsDocument (elements.cxx).javaldx failed! terminate called after throwing an instance of 'com::sun::star::uno::RuntimeException' compiled fine, installed without problems jdk 1.6 too. any ideas? thanks ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org" Google find many things with "javaldx failed". Is a problem with java, but different solutions (wrong xml, home permission, java- version ...). Hope you find a solution. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: Wine for Diablo 3 on FreeBSD 9.0R amd64
On 05/17/12 07:54, Любомир Григоров wrote: We have to wait, unfortunately. I am using a Linux partition with Wine meanwhile. As long as it's not mainstream, it will be hard to do. Not to mention port is at 1.4. FreeBSD have 2 wine- ports. :) http://www.freebsd.org/cgi/ports.cgi?query=wine-1&stype=all&sektion=all wine for 1.4 and wine-devel for 1.5 But i can't help with Diablo 3. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
How can i disable cups, docbook, gutenprint and other ports?
Hi all, How can i disable cups, docbook and other ports from compiling after port update? I have no printer and no use of cups or docbook. *Sorry for my english* Greetings ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: Fwd: Need latest xorg
On 06/20/12 23:25, Lynn Steven Killingsworth wrote: I don't seem to have generated much comment. I suspect you are thinking as I do that if your servers don't immediately download then their is a bandit on my Internet line?? Xorg 7.7 for testing. http://miwi.bsdcrew.de/2012/06/cft-xorg-7-7-ready-for-testing/ but i can't load this site at the moment. :( ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: NTFS data recovery
On 07/09/12 18:01, Graeme Dargie wrote: Hi All, I have been given a laptop to look at for a friend, the hard disk is close to death with a SMART error on POST. My initial thought was to just mount it on an Windows 7 machine and grab what I can from the drive. No joy Windows insists that the partition is RAW and I need to format it. I can however mount it under FreeBSD without any problems, the directory structure appears to be intact but there are no files in the places I would expect to find them under the Users directory, I am guessing that these have somehow been deleted or perhaps the victim of a partial OEM recovery process. Is there a way to scan the drive for deleted files from the command line or something from the ports tree that anyone can recommend to fulfil this requirement. Regards Graeme ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org" You can use testdisk (opensource) http://www.getbackdata.net/ntfs.html (commercial) or http://www.pcinspector.de/ (free) Other programms: http://www.sleuthkit.org/ (opensource i think) http://sfdumper.sourceforge.net/ (opensource i think) http://www.ufsexplorer.de/products.php (commercial) For ufs i found only sfdumper for free, others are commercial. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: Double boot
i had same error after some updates and fixed it with fdisk -B -b /boot/boot0/device/ http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/boot-blocks.html On 08/17/12 06:55, p...@sanciai.lt wrote: Hello, I have installed FreeBSD 8.3 to Toshiba Satellite besides Windows XP. Unix boots ok, but I can't reach Windows anymore! It shows: F1 Win F2 FreeBSD F6 PXE Boot F1 - If I press F1, it stays hanging forever. I'm relatively new to FreeBSD. Please, advise which way to go out of this situation. When I rerun sysinstall, there is a warning: "chunk 'ad0s2' [179380224..234441647] does not start on a track boundary" (the chunk of FreeBSD) How to change the boundary of chunk? CDROM is not reachable, something happened to it. I can use only FreeBSD instruments. Which of them? Thanks in advance. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org" ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: "Twitter.com is loading slowly" after updating to Firefox 13.0.1
On 08/21/12 22:48, Toomas Aas wrote: Tue, 17 Jul 2012 kirjutas Lars Eighner : On Tue, 17 Jul 2012, Toomas Aas wrote: Hello! I'm having this problem on two different computers, one running 8.3-STABLE and the other running 9.0-STABLE. After updating Firefox from 12.0 to 13.0.1, whenever I access twitter.com, I can log in but after that a message appears saying that "Twitter.com is loading slowly", and the site is practically unusable - clicking on any of the links has no effect. If you do not know that there is something in firefox (now 13ish) which you must have, deinstall it and install firefox-esr (now 10ish). I was away from my computer for the past month, but now that I returned and replaced Firefox 13.0.1 with 10.0.6 ESR, twitter.com is again behaving normally for me. I'd like to thank everyone who recommended ESR in this thread I have the same problem. My system is an old P4-3GHz with Hypterthreading (Northwood) and with ULE Scheduler isnt funny. I must wait until a site is loaded. Bevor i can't make another tab or open bookmarks. I make a kernel with SCHED_4BSD and it work better. Now i can open another tab or bookmark while a site is loading (but fast isnt it ;( ). I will build a new kernel, look and hope it will be better. System is FreeBSD 9.0 with custom kernel. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: Upgrading 9.1-BETA1 -> 9.1-RC1
On 08/31/12 01:17, warchild wrote: Hi That is wrong, this worked for me on one of my servers since I did it straight away (as soon as I saw the release for rc1. FreeBSD warsol 9.1-RC1 FreeBSD 9.1-RC1 #0: Tue Aug 14 04:25:06 UTC 2012 r...@farrell.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64 that was beta1, and I used freebsd-update to upgrade it! Now, on another server i would like to do I have the same error as the OP. Go to: http://update3.freebsd.org/ Simple put, someone has deleted the whole BETA1 directory/brach!? WHY!? is there another way we can accept the key. or is that data needed.. Can we get the branch restored? It does work. Rebuilding world is so painful. thanks -- View this message in context: http://freebsd.1045724.n5.nabble.com/Upgrading-9-1-BETA1-9-1-RC1-tp5737452p5739453.html Sent from the freebsd-questions mailing list archive at Nabble.com. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org" There is a stupid way to upgrade FreeBSD: http://forums.freebsd.org/archive/index.php/t-1280.html % su # env UNAME_r=7.1-PRERELEASE freebsd-update upgrade -r 7.1 i use # env UNAME_r=8.2 freebsd-update upgrade -r 9.1-RC1 But it doesn't help me with "tool [", so i can't update with csup. :( Greetings ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: 9.0 support for RealTek NIC - re0 driver
On 08/29/12 18:14, d...@safeport.com wrote: This card is on a Dell Inspiron. It works perfectly on 8.x. Dmesg on 8.2 reports it as: re0: pciconf: re0@pci0:4:0:0: class=0x02 card=0x04341028 chip=0x813610ec rev=0x02 hdr=0x00 vendor = 'Realtek Semiconductor' device = 'Realtek 10/100/1000 PCI-E NIC Family all in one NDIS Driver v5.728.0604.2009 06/04/2009 (Rtl8023)' class = network subclass = ethernet On 9.0 I got it to work once or twice out of a couple of dozen tries. 9.0 dmesg reports: re0: RealTek 8139C+/8169/8169S/8110S PCI ... The release docs imply the card is supported. I did not see a PR. Anyone else with similiar issues? Is the MAC changing? Give dmesg some message about it? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: /root/bin and /usr/local/i386-portbld-freebsd9.0
On 08/31/12 20:23, Alexander Kapshuk wrote: I've found the two directories below on my system. I don't remember creating them. So I'd like to be able to find out what package(s) has/have created them, if possible. # ls -ld /root/bin/ drwxr-xr-x 2 root wheel 512 Aug 29 22:52 /root/bin/ # ls -Rl /root/bin/ total 0 # ls -dl /usr/local/i386-portbld-freebsd9.0 drwxr-xr-x 4 root wheel 512 Jul 8 22:32 /usr/local/i386-portbld-freebsd9.0 # ls -Rl /usr/local/i386-portbld-freebsd9.0 total 8 Which program do you use to upgrade/ build ports? http://forums.freebsd.org/showthread.php?t=21088 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: /root/bin and /usr/local/i386-portbld-freebsd9.0
On 08/31/12 21:32, Alexander Kapshuk wrote: On 08/31/12 22:26, lokada...@gmx.de wrote: Which program do you use to upgrade/ build ports? portupgrade. I had a look at the link you'd included in your previous email. I'm still unclear as to where the two directories came from. Thanks. I think it comes from portupgrade. I use portmaster, but when i look at google, i found some thinks with portupgrade and portbld. I think, portbld is building for some ports, but on different places. Kick it (or rename it), look that all ok and make a upgrade, if available. If one port need it, it will create it. greetings ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: /root/bin and /usr/local/i386-portbld-freebsd9.0
On 08/31/12 21:43, Alexander Kapshuk wrote: On 08/31/12 22:41, lokada...@gmx.de wrote: I think it comes from portupgrade. I use portmaster, but when i look at google, i found some thinks with portupgrade and portbld. I think, portbld is building for some ports, but on different places. Kick it (or rename it), look that all ok and make a upgrade, if available. If one port need it, it will create it. Understood. Thanks. Any ideas about /root/bin? Not really. It looks like an error like my "tool [". I get this after i would go to head (in february?) and get back this linking. No chance to get of it. Every new buildworld will look for it. :( ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: Cant find snmptrapd.conf file
Have you search with "find / -iname "snmptrap.conf"? Most example config files are under /usr/share/ or /usr/local/share. Else build a new one and test it. Set something, that is easy to test and look. On 09/06/12 22:14, Maxim Galkin wrote: Where is the configuration file for snmptrapd? I'm using net-snmp-5.7.1_7. and succesfully starting snmpd and snmptrapd. But there is only a config snmpd.conf ! Why can not I find a file snmptrapd.conf referred in man? Where do I register my "traphandlers"? Help guys ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org" ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: FreeBSD Install Problem
On 09/07/12 23:10, Chris Neudorf wrote: An installation step has been aborted. Would you like to restart the installation or exit the installer? --- [ Restart ] [ Exit ] - When I click restart I end up with the same result, and I end up in a neverending cycle of unable to install. (I even have a the same problem installing from GhostBSD.) Is there any remedies to this problem? In Bios is legacy support for sata enable? On some systems this is a problem. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: How to configure USB wifi stick?
On 22.09.2012 16:26, Fbsd8 wrote: Looking for howto on configuring a Cisco Linksys AE2500 USB wifi stick. When I plug it in all I get is the USB msg "ugen3.2: at usbus3". FreeBSD handbook does not have section on usb wifi setup. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org" Is your USB stick or Chip on hardware list? http://www.freebsd.org/releases/8.2R/hardware.html#WLAN rum and ural driver are for some wifi usb sticks. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: How to configure USB wifi stick?
On 22.09.2012 19:14, Fbsd8 wrote: lokada...@gmx.de wrote: On 22.09.2012 16:26, Fbsd8 wrote: Looking for howto on configuring a Cisco Linksys AE2500 USB wifi stick. When I plug it in all I get is the USB msg "ugen3.2: at usbus3". FreeBSD handbook does not have section on usb wifi setup. Is your USB stick or Chip on hardware list? http://www.freebsd.org/releases/8.2R/hardware.html#WLAN rum and ural driver are for some wifi usb sticks. NO ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org" Have you load bwi driver? it looks like Linksys AE2500 USB use BMC4323 chipset. https://www.google.de/search?q=Cisco+Linksys+AE2500+chipset ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: How to configure USB wifi stick?
On 22.09.2012 20:59, Fbsd8 wrote: lokada...@gmx.de wrote: On 22.09.2012 19:14, Fbsd8 wrote: lokada...@gmx.de wrote: On 22.09.2012 16:26, Fbsd8 wrote: Looking for howto on configuring a Cisco Linksys AE2500 USB wifi stick. When I plug it in all I get is the USB msg "ugen3.2: at usbus3". FreeBSD handbook does not have section on usb wifi setup. Is your USB stick or Chip on hardware list? http://www.freebsd.org/releases/8.2R/hardware.html#WLAN rum and ural driver are for some wifi usb sticks. NO Have you load bwi driver? it looks like Linksys AE2500 USB use BMC4323 chipset. https://www.google.de/search?q=Cisco+Linksys+AE2500+chipset I am running 9.1-RC1 and have no boot loader.conf for any wifi modules. Is there some usb.conf file where I can add statement for my USB linksys AE2500 wifi stick so the kernel modules will get auto loaded at first use time? If not, what are the boot loader statements I need to add? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org" Create loader.conf self. cd /boot/ edit loader.conf /autoboot_delay/="3" When you reboot your system and you see, that you only have 3 or 2 seconds instead 10 your loader.conf will be load. When i remeber right, put bwi_load="YES" in loader.conf From command line you can make "kldload bwi" to load and test it without reboot. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: How to configure USB wifi stick?
On 22.09.2012 20:59, Fbsd8 wrote: I am running 9.1-RC1 and have no boot loader.conf for any wifi modules. Is there some usb.conf file where I can add statement for my USB linksys AE2500 wifi stick so the kernel modules will get auto loaded at first use time? If not, what are the boot loader statements I need to add? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org" To load bwi in loader.conf put if_bwi_load="YES" in it. http://www.freebsd.org/cgi/man.cgi?query=bwi&sektion=4&manpath=FreeBSD+8.2-RELEASE ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: Strange I/O problem on Freenas 0.7.2
Freenas 0.7.2 is old. Is write cache enable? http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/configtuning-disk.html Is ZFS in use? ZFS has a value for tuning. On 22.10.2012 07:34, Henti Smith wrote: Hi all. I'm having a very weird problem with a friends Freenas set-up. I'm trying to backup his data before migrating to nas4free or just plain FreeBSD. The setup is as follows: HP Microserver N36. 2BG Mem (1713 MB Usable) (no swap) 4 x 2000GB (ST2000DL003-9VT166 Seagate) drives in a graid5 setup. Initially he had no problems with the setup. Samba share was fine and he populated the raid set with 3TB of data, but somewhere along the line the disk I/O went VERY slow. I initially thought this might be raid related and did some tests but actually found the problem to be on the discs. [root@freenas ~]# diskinfo -c /dev/ad4 /dev/ad4 512 # sectorsize 2000398934016 # mediasize in bytes (1.8T) 3907029168 # mediasize in sectors 3876021 # Cylinders according to firmware. 16 # Heads according to firmware. 63 # Sectors according to firmware. ad:5YD2VEWQ # Disk ident. I/O command overhead: time to read 10MB block 0.250736 sec =0.012 msec/sector time to read 20480 sectors 79.653738 sec =3.889 msec/sector calculated command overhead =3.877 msec/sector [root@freenas ~]# diskinfo -t /dev/ad4 /dev/ad4 512 # sectorsize 2000398934016 # mediasize in bytes (1.8T) 3907029168 # mediasize in sectors 3876021 # Cylinders according to firmware. 16 # Heads according to firmware. 63 # Sectors according to firmware. ad:5YD2VEWQ # Disk ident. Seek times: Full stroke: 250 iter in 124.649884 sec = 498.600 msec Half stroke: 250 iter in 52.112172 sec = 208.449 msec Quarter stroke: 500 iter in 167.991252 sec = 335.983 msec Short forward:400 iter in 72.027133 sec = 180.068 msec Short backward: 400 iter in 150.708625 sec = 376.772 msec Seq outer: 2048 iter in 5.748059 sec =2.807 msec Seq inner: 2048 iter in 119.395823 sec = 58.299 msec Transfer rates: outside: 102400 kbytes in 39.207296 sec = 2612 kbytes/sec middle:102400 kbytes in 113.757181 sec = 900 kbytes/sec inside:102400 kbytes in 153.438159 sec = 667 kbytes/sec S.M.A.R.T. is not reporting any issues either and the speeds are similar on all the drives. No errors in /var/log either. Any help or suggestions would be appreciated. Regards Henti ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org" ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: py-bittornado gone
On 26.10.2012 19:50, Damien Fleuriot wrote: On 26 Oct 2012, at 19:05, Artifex Maximus wrote: Hello! py-bittornado gone and I accidentally delete with portmanager at upgrade. cfv uses and I use cfv for testing torrent so I need py-bittornado (or py-bittorrent). How can I restore that package? Bye, a How about getting the original source and building from there, or a package for pkg_add ? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org" Portdowngrade? http://www.freebsd.org/cgi/ports.cgi?query=portdown&stype=all It works fine in the past, but since Release 8.0 i hadn't use it. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: portmaster + unknown dependency problem
On 20.11.2012 20:47, Laszlo Nagy wrote: I have a 8.2-STABLE system. Last port upgrade was about a year ago. (I know, this is bad.) I was trying to update all ports, by following the UPDATING file. As it turned out, some ports has been deprecated/deleted. I have a problem in particular with the py-bittornado-core port. I do not need it. So I have deleted it: # pkg_info | grep bittornado # Clearly, it is not installed. However, when I write in this command: # portmaster -a Then I get this error: ===>>> The net-p2p/py-bittornado-core port has been deleted: Has expired: Depends on the deprecated wx 2.4 ===>>> Aborting update Well, here is the question: why does it want to build a port that does not even exist in the ports tree? It was really deleted, there is no such thing as /usr/ports/net-p2p/py-bittornado-core . I have also tried to do this: # portmaster -a -x py-bittornado-core but it has exactly the same problem. Is this a stale dependency to a nonexistent port? How can I overcome this problem? Thanks, Laszlo ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org" make "pkg_info | grep "*bittornado*" When it found this package, you can think about to delete it. When you have delete it or doesnt found it, make a "portmaster --check-depends" to solve depends. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: OpenVPN vm cant connect to other VM's
On 06.03.2013 11:38, Brent Clark wrote: Hi guys Im struggling with a freebsd vm, that I have that I use for a VPN connection too, from my workstation to my home LAN. And I was wondering if someone could peer review me and my problem. OpenVPN is working beautifully. I.e. I can connect to some services (apache etc) that I run directly on my FreeBSD / openvpn vm. What im now trying to achieve is that I can connect to other VMs / machines on my home LAN. Im using tun for my VPN, and my pf.conf looks like so (please see the nat on ...) [root@freebsd /usr/home/bclark]# cat /etc/pf.conf ext_if="re0" vpn_if="tun0" int_net="10.0.0.0/24" vpn_net="192.168.200.0/24" set skip on lo0 set optimization normal #set block-policy drop set limit { states 2, frags 1, src-nodes 2 } # Normalization: reassemble fragments and resolve or reduce traffic ambiguities. scrub in all # Translation: specify how addresses are to be mapped or redirected. # NAT rules # enabling NAT currently breaks policy based routing #nat on $ext_if from { $int_net, $vpn_net } to any -> ($ext_if) #nat on tun0 from { 192.168.200.0/24 } to any -> (re0) nat on re0 from { 192.168.200.0/24 } to any -> (re0) table persist block in quick on re0 proto tcp from to any port ssh label "ssh brute" What am I missing? If anyone could assist, it would be appreciated. Kind Regards Brent Clark ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org" Is "sysctl net.inet.ip.forwarding=1" ? http://www.freebsd.org/doc/handbook/network-natd.html Have you set your route for 10.8.x.x- subnet to your vpn-host? Else all your traffic will go to your default gateway and when there is no route, it will go ins internet. Make a test with tcpdump and ping to see, where your traffic is going. Regards ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re: OpenVPN vm cant connect to other VM's
On 11.03.2013 20:13, Michael Sierchio wrote: Are you pushing routes in your server.conf file? (hint - show, don't tell) - M On Wed, Mar 6, 2013 at 2:38 AM, Brent Clark wrote: Hi guys Im struggling with a freebsd vm, that I have that I use for a VPN connection too, from my workstation to my home LAN. And I was wondering if someone could peer review me and my problem. OpenVPN is working beautifully. I.e. I can connect to some services (apache etc) that I run directly on my FreeBSD / openvpn vm. What im now trying to achieve is that I can connect to other VMs / machines on my home LAN. Im using tun for my VPN, and my pf.conf looks like so (please see the nat on ...) [root@freebsd /usr/home/bclark]# cat /etc/pf.conf ext_if="re0" vpn_if="tun0" int_net="10.0.0.0/24" vpn_net="192.168.200.0/24" set skip on lo0 set optimization normal #set block-policy drop set limit { states 2, frags 1, src-nodes 2 } # Normalization: reassemble fragments and resolve or reduce traffic ambiguities. scrub in all # Translation: specify how addresses are to be mapped or redirected. # NAT rules # enabling NAT currently breaks policy based routing #nat on $ext_if from { $int_net, $vpn_net } to any -> ($ext_if) #nat on tun0 from { 192.168.200.0/24 } to any -> (re0) nat on re0 from { 192.168.200.0/24 } to any -> (re0) table persist block in quick on re0 proto tcp from to any port ssh label "ssh brute" What am I missing? If anyone could assist, it would be appreciated. Kind Regards Brent Clark ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org" ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org" For your own network yes. You must route all your traffic, which is for your other lan/ subnet. Every VPN connect must be corrected routed, equal which vpn is used. Else every traffic will go loose through internet traffic. I connect some subnets with OpenVPN and every subnet must configured with "ccd" (its a subfolder with a filename of certificate- name and content with "iroute subnet" to tell, when client xyz is connect, subnet is there) and in server.conf. Else this subnets won't routed correct. You can add this route manuell through its OpenVPN- Gateway. Show: server.conf: look for "client-config-dir /usr/local/.../ccd" in server.conf and insert your subnet: route 192.168.x.x 255.255.255.0 create a file with certificate-name under "/usr/local/etc/openvpn/config/"your connect-name"/ccd/ and insert: iroute 192.168.x.x 255.255.255.0 Look in /var/log/openvpn.log for the right certificate-name. Everytime this certificat/ client is connect the subnet- traffic will be routed through him. Don't forget to restart openvpn. ;) *Sorry, my english is not so good* Regards ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Re:
On 12.04.2013 19:50, leeoliveshackelf...@surewest.net wrote: Good afternoon, dear FreeBSD enthusiasts. Is there anyone who has attempted to install a TP-LINK TL-WDN4800 p.c.i.-express wireless network interface card? I am using FreeBSD 9.1 on a Hewlett-Packard xw4400 workstation. The card works perfectly under Windows XP. However, it seems that the FreeBSD operating system does not even recognize the existence of the device; at least, I cannot find any mention of it in the dmesg.boot file. Any and all comments or suggestions will be appreciated. Also, many thanks to those of you who have responded to my previous inquiries. Yours truly, Newby Lee P.S. I failed to mention that the integrated circuit is an Atheros AR9380. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org" Have you load ath and wi? http://www.freebsd.org/doc/en/books/handbook/network-wireless.html I don't know, if Atheros AR9380 is supported. https://www.google.de/search?q=tP-LINK+TL-WDN4800+freebsd ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"