Re: CardBus problems. $PIR: ROUTE_INTERRUPT Failed.
Andrew Walker schrieb: [...] cbb0: mem 0x20822000-0x20822fff at device 2.0 on pci0 cardbus0: on cbb0 cbb0: mem 0x20821000-0x20821fff at device 2.1 on pci0 cardbus0: on cbb1 $PIR: ROUTE_INTERRUPT failed. cbb: Unable to map IRQ... device_attach: cbb1 attach returned 12 [...] I had similar errors with my Thinkpad 760XL. Try FreeBSD 4.11 and if this work you can mostly use 5.x by using a custom kernel with device pcic device card instead of device cbb device pccard device cardbus This is because a new pccard bus driver infrastructure was added in FreeBSD 5 and the old was removed as alternative in 6. The new one doesn't work with old ISA hardware. Björn ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
CardBus problems. $PIR: ROUTE_INTERRUPT Failed.
Yeah, so I'm about to give up on this computer entirely and throw it away unless someone can even give me some sort of clue about what's going on here. I have installed FreeBSD 6.0 on my Thinkpad 380XD, but I cannot get networking to work, and I believe it is because there is a conflict with my cardbus initializing. The card is a Xircom RBEM58G-100, and is listed as supported under the dc driver. Here are the relavent messages from /var/log/messages: cbb0: mem 0x20822000-0x20822fff at device 2.0 on pci0 cardbus0: on cbb0 cbb0: mem 0x20821000-0x20821fff at device 2.1 on pci0 cardbus0: on cbb1 $PIR: ROUTE_INTERRUPT failed. cbb: Unable to map IRQ... device_attach: cbb1 attach returned 12 ...and then later... unknown: can't assign resource (port) unknown: can't assign resource (irq) unknown: can't assign resource (port) unknown: can't assign resource (memory) unknown: can't assign resource (port) unknown: can't assign resource (port) unknown: can't assign resource (port) I've sent this to this list before, and I've posted on the forums, but so far no response. Is this not the right mailing-list? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Thinkpad 380XD with CardBus problems. $PIR: ROUTE_INTERRUPT Failed.
I have installed FreeBSD 6.0 on my Thinkpad 380XD, but I cannot get networking to work, and I believe it is because there is a conflict with my cardbus initializing. The card is a Xircom RBEM58G-100, and is listed as supported under the dc driver. Here are the relavent messages from /var/log/messages: cbb0: mem 0x20822000-0x20822fff at device 2.0 on pci0 cardbus0: on cbb0 cbb0: mem 0x20821000-0x20821fff at device 2.1 on pci0 cardbus0: on cbb1 $PIR: ROUTE_INTERRUPT failed. cbb: Unable to map IRQ... device_attach: cbb1 attach returned 12 AND LATER (may not be relavent, but...) unknown: can't assign resource (port) unknown: can't assign resource (irq) unknown: can't assign resource (port) unknown: can't assign resource (memory) unknown: can't assign resource (port) unknown: can't assign resource (port) unknown: can't assign resource (port) ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"